Add support for flag status register on Micron chips
PATCH 1/1 Add support for flag status register on Micron chips
From: Graham Moore <[email protected]>
This is a slightly different version of the patch that Insop Song submitted (http://marc.info/?i=201403012022.10111.marex%20()%20denx%20!%20de).
I talked to Insop, and he agreed I should submit this patch as a follow-on to his.
This patch uses a flag in the m25p_ids[] array to determine which chips need to use the FSR (Flag Status Register).
Rationale for using the FSR:
The Micron data sheets say we have to do this, at least for the multi-die 512M and 1G parts (n25q512 and n25q00). In practice, if we don't check the FSR for program/erase status, and we rely solely on the status register (SR), then we get corrupted data in the flash.
Micron told us (Altera) that for multi-die chips based on the 65nm 256MB die, we need to check the SR first, then check the FSR, which is why the wait_for_fsr_ready function does that. Future chips based on 45 nm 512MB die will use the FSR only.
Thanks.
Graham Moore (1):
Add support for flag status register on Micron chips.
drivers/mtd/devices/m25p80.c | 94 +++++++++++++++++++++++++++++++++++------- 1 file changed, 80 insertions(+), 14 deletions(-)
Signature · 1 line
1.7.10.4
PATCH 1/1 Add support for flag status register on Micron chips.
From: Graham Moore <[email protected]>
Some new Micron flash chips require reading the flag status register to determine when operations have completed.
Furthermore, chips with multi-die stacks of the 65nm 256Mb QSPI also require reading the status register before reading the flag status register.
This patch adds support for the flag status register in the n25q512a1 and n25q00 Micron QSPI flash chips.
--- drivers/mtd/devices/m25p80.c | 94 +++++++++++++++++++++++++++++++++++------- 1 file changed, 80 insertions(+), 14 deletions(-)
drivers/mtd/devices/m25p80.c +80 -14
@@ -39,6 +39,7 @@#define OPCODE_WREN 0x06/* Write enable */ #define OPCODE_RDSR 0x05/* Read status register */ #define OPCODE_WRSR 0x01/* Write status register 1 byte */ +#define OPCODE_RDFSR 0x70/* read flag status register */ #define OPCODE_NORM_READ 0x03/* Read data bytes (low frequency) */ #define OPCODE_FAST_READ 0x0b/* Read data bytes (high frequency) */ #define OPCODE_QUAD_READ 0x6b/* Read data bytes */
@@ -81,6 +82,9 @@#define SR_QUAD_EN_MX 0x40/* Macronix Quad I/O */ +/* Flag Status Register bits */ +#define FSR_READY 0x80/* FSR ready */ +/* Configuration Register bits. */ #define CR_QUAD_EN_SPAN 0x2/* Spansion Quad I/O */
@@ -108,6 +112,7 @@ struct m25p {u8 read_opcode;u8 program_opcode;u8 *command; +int (*wait_till_ready)(struct m25p *flash);enum read_type flash_read; };
@@ -145,6 +150,27 @@ static int read_sr(struct m25p *flash) }/* +* Read the flag status register, returning its value in the location +* Return the status register value. +* Returns negative if error occurred. +*/ +static int read_fsr (struct m25p *flash) +{ +ssize_t retval; +u8 code =OPCODE_RDFSR ; +u8 val; + + retval =spi_write_then_read (flash->spi, &code,1 , &val,1 ); + +if (retval <0 ) { +dev_err (&flash->spi->dev,"error %d reading FSR\n" , + (int ) retval); +return retval; + } + +return val; +} +/* * Read configuration register, returning its value in the * location. Return the configuration register value. * Returns negative if error occured.
@@ -233,7 +259,7 @@ static inline int set_4byte(struct m25p *flash, u32 jedec_id, int enable)* Service routine to read status register until ready, or timeout occurs. * Returns non-zero if error. */ -static int wait_till_ready (struct m25p *flash) +static int _wait_till_ready (struct m25p *flash) {unsigned long deadline;int sr;
@@ -254,6 +280,37 @@ static int wait_till_ready(struct m25p *flash) }/* +* Service routine to read flag status register until ready, or timeout occurs. +* Returns non-zero if error. +*/ +static int _wait_till_fsr_ready (struct m25p *flash) +{ +unsigned long deadline; +int fsr; +int sr; + + deadline = jiffies +MAX_READY_WAIT_JIFFIES ; + +do { + sr =read_sr (flash); +if (sr <0 ) +break ; +/* only check fsr if sr not busy */ +if (!(sr &SR_WIP )) { + fsr =read_fsr (flash); +if (fsr <0 ) +break ; +if (fsr &FSR_READY ) +return 0 ; + } + +cond_resched (); + + }while (!time_after_eq (jiffies, deadline)); + +return 1 ; +} +/* * Write status Register and configuration register with 2 bytes * The first byte will be written to the status register, while the * second byte will be written to the configuration register.
@@ -280,7 +337,7 @@ static int macronix_quad_enable(struct m25p *flash)spi_write (flash->spi, &cmd,2 ); -if (wait_till_ready (flash)) +if (flash->wait_till_ready (flash))return 1 ; ret =read_sr (flash);
@@ -351,7 +408,7 @@ static int erase_chip(struct m25p *flash) (long long)(flash->mtd.size >> 10));/* Wait until finished previous write command. */ -if (wait_till_ready (flash)) +if (flash->wait_till_ready (flash))return 1 ;/* Send write enable, then erase commands. */
@@ -391,7 +448,7 @@ static int erase_sector(struct m25p *flash, u32 offset) __func__, flash->mtd.erasesize / 1024, offset);/* Wait until finished previous write command. */ -if (wait_till_ready (flash)) +if (flash->wait_till_ready (flash))return 1 ;/* Send write enable, then erase commands. */
@@ -536,7 +593,7 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,mutex_lock (&flash->lock);/* Wait till previous write/erase is done. */ -if (wait_till_ready (flash)) { +if (flash->wait_till_ready (flash)) {/* REVISIT status return?? */ mutex_unlock (&flash->lock);return 1 ;
@@ -585,7 +642,7 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,mutex_lock (&flash->lock);/* Wait until finished previous write command. */ -if (wait_till_ready (flash)) { +if (flash->wait_till_ready (flash)) {mutex_unlock (&flash->lock);return 1 ; }
@@ -628,7 +685,7 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, t[1 ].tx_buf = buf + i; t[1 ].len = page_size; -wait_till_ready (flash); + flash->wait_till_ready (flash);write_enable (flash);
@@ -668,7 +725,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,mutex_lock (&flash->lock);/* Wait until finished previous write command. */ - ret =wait_till_ready (flash); + ret = flash->wait_till_ready (flash);if (ret) goto time_out;
@@ -683,7 +740,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,/* write one byte. */ t[1 ].len =1 ;spi_sync (flash->spi, &m); - ret =wait_till_ready (flash); + ret = flash->wait_till_ready (flash);if (ret) goto time_out; *retlen += m.actual_length -m25p_cmdsz (flash);
@@ -702,7 +759,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, t[1 ].tx_buf = buf + actual;spi_sync (flash->spi, &m); - ret =wait_till_ready (flash); + ret = flash->wait_till_ready (flash);if (ret) goto time_out; *retlen += m.actual_length - cmd_sz;
@@ -710,7 +767,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, to +=2 ; }write_disable (flash); - ret =wait_till_ready (flash); + ret = flash->wait_till_ready (flash);if (ret) goto time_out;
@@ -724,7 +781,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, t[1 ].tx_buf = buf + actual;spi_sync (flash->spi, &m); - ret =wait_till_ready (flash); + ret = flash->wait_till_ready (flash);if (ret) goto time_out; *retlen += m.actual_length -m25p_cmdsz (flash);
@@ -745,7 +802,7 @@ static int m25p80_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)mutex_lock (&flash->lock);/* Wait until finished previous command */ -if (wait_till_ready (flash)) { +if (flash->wait_till_ready (flash)) { res =1 ; goto err; }
@@ -790,7 +847,7 @@ static int m25p80_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)mutex_lock (&flash->lock);/* Wait until finished previous command */ -if (wait_till_ready (flash)) { +if (flash->wait_till_ready (flash)) { res =1 ; goto err; }
@@ -856,6 +913,7 @@ struct flash_info {#define M25P_NO_FR 0x08/* Can't do fastread */ #define SECT_4K_PMC 0x10/* OPCODE_BE_4K_PMC works uniformly */ #define M25P80_QUAD_READ 0x20/* Flash supports Quad Read */ +#define USE_FSR 0x40/* use flag status register */ };#define INFO (_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
@@ -941,6 +999,8 @@ static const struct spi_device_id m25p_ids[] = { { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) }, { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) }, { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) }, + { "n25q512a1", INFO(0x20ba20, 0, 64 * 1024, 1024, USE_FSR) }, + { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, USE_FSR) },/* PMC */ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
@@ -1206,6 +1266,12 @@ static int m25p_probe(struct spi_device *spi)if (info->flags &M25P_NO_ERASE ) flash->mtd.flags |=MTD_NO_ERASE ; +if (info->flags &USE_FSR ) + flash->wait_till_ready = &_wait_till_fsr_ready; +else + flash->wait_till_ready = &_wait_till_ready; + + ppdata.of_node = spi->dev.of_node; flash->mtd.dev.parent = &spi->dev; flash->page_size = info->page_size;
Signature · 1 line
1.7.10.4
RE: [PATCH] Add support for flag status register on Micron chips.
On Tuesday, April 08, 2014 9:13 AM, Graham Moore <[email protected]>
Quoted 12 lines
From: Graham Moore <[email protected]>
Some new Micron flash chips require reading the flag status register to determine when operations have completed.
Furthermore, chips with multi-die stacks of the 65nm 256Mb QSPI also require reading the status register before reading the flag status register.
This patch adds support for the flag status register in the n25q512a1 and n25q00 Micron QSPI flash chips.
Reviewed his change, and it is more generic then my previous patch.
Quoted 272 lines
Signed-off-by Graham Moore <[email protected]>--- drivers/mtd/devices/m25p80.c | 94 +++++++++++++++++++++++++++++++++++------- 1 file changed, 80 insertions(+), 14 deletions(-)drivers/mtd/devices/m25p80.c +0
-0@@ -39,6 +39,7 @@#define OPCODE_WREN 0x06/* Write enable */ #define OPCODE_RDSR 0x05/* Read status register */ #define OPCODE_WRSR 0x01/* Write status register 1 byte */
+#defineOPCODE_RDFSR0x70/* read flag status
register */
#defineOPCODE_NORM_READ0x03/* Read data bytes (low
frequency) */
#defineOPCODE_FAST_READ0x0b/* Read data bytes (high
frequency) */
#defineOPCODE_QUAD_READ0x6b/* Read data bytes */drivers/mtd/devices/m25p80.c +25
-1@@ -81,6 +82,9 @@#define SR_QUAD_EN_MX 0x40/* Macronix Quad I/O */ +/* Flag Status Register bits */ +#define FSR_READY 0x80/* FSR ready */ +/* Configuration Register bits. */ #define CR_QUAD_EN_SPAN 0x2/* Spansion Quad I/O */ @@ -108,6 +112,7 @@ struct m25p {u8 read_opcode;u8 program_opcode;u8 *command; +int (*wait_till_ready)(struct m25p *flash);enum read_type flash_read; };@@ -145,6 +150,27 @@ static int read_sr(struct m25p *flash) }/* +* Read the flag status register, returning its value in the location +* Return the status register value. +* Returns negative if error occurred. +*/ +static int read_fsr (struct m25p *flash) { +ssize_t retval; +u8 code =OPCODE_RDFSR ; +u8 val; + + retval =spi_write_then_read (flash->spi, &code,1 , &val,1 ); + +if (retval <0 ) { +dev_err (&flash->spi->dev,"error %d reading FSR\n" , + (int ) retval); +return retval; + } + +return val; +} +/* * Read configuration register, returning its value in the * location. Return the configuration register value. * Returns negative if error occured. @@ -233,7 +259,7 @@ static inline int set_4byte(struct m25p *flash, u32jedec_id, int enable) * Service routine to read status register until ready, or timeout occurs. * Returns non-zero if error. */ -static int wait_till_ready (struct m25p *flash) +static int _wait_till_ready (struct m25p *flash) {unsigned long deadline;drivers/mtd/devices/m25p80.c +32
-2int sr;@@ -254,6 +280,37 @@ static int wait_till_ready(struct m25p *flash) }/* +* Service routine to read flag status register until ready, or timeout occurs. +* Returns non-zero if error. +*/ +static int _wait_till_fsr_ready (struct m25p *flash) { +unsigned long deadline; +int fsr; +int sr; + + deadline = jiffies +MAX_READY_WAIT_JIFFIES ; + +do { + sr =read_sr (flash); +if (sr <0 ) +break ; +/* only check fsr if sr not busy */ +if (!(sr &SR_WIP )) { + fsr =read_fsr (flash); +if (fsr <0 ) +break ; +if (fsr &FSR_READY ) +return 0 ; + } + +cond_resched (); + + }while (!time_after_eq (jiffies, deadline)); + +return 1 ; +} +/* * Write status Register and configuration register with 2 bytes * The first byte will be written to the status register, while the * second byte will be written to the configuration register. @@ -280,7 +337,7 @@ static int macronix_quad_enable(struct m25p *flash)spi_write (flash->spi, &cmd,2 ); -if (wait_till_ready (flash)) +if (flash->wait_till_ready (flash))return 1 ; ret =read_sr (flash);@@ -351,7 +408,7 @@ static int erase_chip(struct m25p *flash) (long long)(flash->mtd.size >> 10));/* Wait until finished previous write command. */ -if (wait_till_ready (flash)) +if (flash->wait_till_ready (flash))return 1 ; /* Send write enable, then erase commands. */ @@ -391,7 +448,7@@ static int
erase_sector(struct m25p *flash, u32 offset)drivers/mtd/devices/m25p80.c +1
-1__func__, flash->mtd.erasesize / 1024, offset);/* Wait until finished previous write command. */ -if (wait_till_ready (flash)) +if (flash->wait_till_ready (flash))return 1 ; /* Send write enable, then erase commands. */ @@ -536,7 +593,7@@ static int m25p80_read(struct
mtd_info*mtd,loff_tfrom,size_tlen,drivers/mtd/devices/m25p80.c +2
-2mutex_lock (&flash->lock);/* Wait till previous write/erase is done. */ -if (wait_till_ready (flash)) { +if (flash->wait_till_ready (flash)) {/* REVISIT status return?? */ mutex_unlock (&flash->lock);return 1 ;@@ -585,7 +642,7 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,mutex_lock (&flash->lock);/* Wait until finished previous write command. */ -if (wait_till_ready (flash)) { +if (flash->wait_till_ready (flash)) {mutex_unlock (&flash->lock);return 1 ;drivers/mtd/devices/m25p80.c +3
-3}@@ -628,7 +685,7 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, t[1 ].tx_buf = buf + i; t[1 ].len = page_size; -wait_till_ready (flash); + flash->wait_till_ready (flash);write_enable (flash);@@ -668,7 +725,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to,size_t len, mutex_lock(&flash->lock);/* Wait until finished previous write command. */ - ret =wait_till_ready (flash); + ret = flash->wait_till_ready (flash);if (ret) goto time_out;@@ -683,7 +740,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to,size_t len,/* write one byte. */ t[1].len = 1;spi_sync (flash->spi, &m); - ret =wait_till_ready (flash); + ret = flash->wait_till_ready (flash);if (ret) goto time_out;drivers/mtd/devices/m25p80.c +4
-3*retlen += m.actual_length - m25p_cmdsz(flash); @@ -702,7 +759,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, t[1].tx_buf = buf + actual;spi_sync (flash->spi, &m); - ret =wait_till_ready (flash); + ret = flash->wait_till_ready (flash);if (ret) goto time_out; *retlen += m.actual_length - cmd_sz;@@ -710,7 +767,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to,size_t len, to += 2; }write_disable (flash); - ret =wait_till_ready (flash); + ret = flash->wait_till_ready (flash);if (ret) goto time_out;@@ -724,7 +781,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to,size_t len, t[1].tx_buf = buf + actual;spi_sync (flash->spi, &m); - ret =wait_till_ready (flash); + ret = flash->wait_till_ready (flash);if (ret) goto time_out;*retlen += m.actual_length -
m25p_cmdsz(flash); @@ -745,7
+802,7 @@ static intm25p80_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)drivers/mtd/devices/m25p80.c +2
-2mutex_lock (&flash->lock);/* Wait until finished previous command */ -if (wait_till_ready (flash)) { +if (flash->wait_till_ready (flash)) { res =1 ; goto err; }@@ -790,7 +847,7 @@ static int m25p80_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)mutex_lock (&flash->lock);/* Wait until finished previous command */ -if (wait_till_ready (flash)) { +if (flash->wait_till_ready (flash)) { res =1 ; goto err;drivers/mtd/devices/m25p80.c +0
-0}@@ -856,6 +913,7 @@ struct flash_info {#define M25P_NO_FR 0x08/* Can't do fastread */ #define SECT_4K_PMC 0x10/* OPCODE_BE_4K_PMC works uniformly */
#defineM25P80_QUAD_READ0x20/* Flash supports Quad Read
*/
+#defineUSE_FSR0x40/* use flag status
register */
};#define
INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)\drivers/mtd/devices/m25p80.c +8
-1@@ -941,6 +999,8 @@ static const struct spi_device_id m25p_ids[] = { { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) }, { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) }, { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) }, + { "n25q512a1", INFO(0x20ba20, 0, 64 * 1024, 1024, USE_FSR) }, + { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, USE_FSR) },/* PMC */ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },@@ -1206,6 +1266,12 @@ static int m25p_probe(struct spi_device *spi)if (info->flags &M25P_NO_ERASE ) flash->mtd.flags |=MTD_NO_ERASE ; +if (info->flags &USE_FSR ) + flash->wait_till_ready = &_wait_till_fsr_ready; +else + flash->wait_till_ready = &_wait_till_ready; + + ppdata.of_node = spi->dev.of_node; flash->mtd.dev.parent = &spi->dev; flash->page_size = info->page_size; --1.7.10.4
Re: [PATCH] Add support for flag status register on Micron chips.
In reply to [email protected]Quoted 11 lines · On Tuesday, April 08, 2014 at 06:12:50 PM, [email protected] wrote:
From: Graham Moore <[email protected]>
Some new Micron flash chips require reading the flag status register to determine when operations have completed.
Furthermore, chips with multi-die stacks of the 65nm 256Mb QSPI also require reading the status register before reading the flag status register.
This patch adds support for the flag status register in the n25q512a1 and n25q00 Micron QSPI flash chips.
[...]
drivers/mtd/devices/m25p80.c static int read_sr(struct m25p *flash) · line 167
Quoted 11 lines
drivers/mtd/devices/m25p80.c +11
-0+static int read_fsr (struct m25p *flash) +{ +ssize_t retval; +u8 code =OPCODE_RDFSR ; +u8 val; + + retval =spi_write_then_read (flash->spi, &code,1 , &val,1 ); + +if (retval <0 ) { +dev_err (&flash->spi->dev,"error %d reading FSR\n" , + (int ) retval);
Is the type-cast really needed here? Why ?
Quoted 13 lines
drivers/mtd/devices/m25p80.c +6
-0+return retval; + } + +return val; +} +/* * Read configuration register, returning its value in the * location. Return the configuration register value. * Returns negative if error occured. @@ -233,7 +259,7 @@ static inline int set_4byte(struct m25p *flash, u32
jedec_id, int enable) * Service routine to read status register until ready, or timeout occurs. * Returns non-zero if error.
*/
drivers/mtd/devices/m25p80.c static inline int set_4byte(struct m25p *flash, u32 jedec_id, int enable) · line 262
Quoted 2 lines
drivers/mtd/devices/m25p80.c +1
-1-static int wait_till_ready (struct m25p *flash) +static int _wait_till_ready (struct m25p *flash)
Please avoid using function names that start with underscore . [...]
Thanks!
Best regards,
Marek Vasut
Re: [PATCH] Add support for flag status register on Micron chips.
Quoted 15 lines · Marek Vasut
Quoted 11 lines · On Tuesday, April 08, 2014 at 06:12:50 PM, [email protected] wrote:
From: Graham Moore <[email protected]>
Some new Micron flash chips require reading the flag status register to determine when operations have completed.
Furthermore, chips with multi-die stacks of the 65nm 256Mb QSPI also require reading the status register before reading the flag status register.
This patch adds support for the flag status register in the n25q512a1 and n25q00 Micron QSPI flash chips.
[...]
Quoted 13 lines
drivers/mtd/devices/m25p80.c static int read_sr(struct m25p *flash) · line 167
Quoted 11 lines
drivers/mtd/devices/m25p80.c +11
-0+static int read_fsr (struct m25p *flash) +{ +ssize_t retval; +u8 code =OPCODE_RDFSR ; +u8 val; + + retval =spi_write_then_read (flash->spi, &code,1 , &val,1 ); + +if (retval <0 ) { +dev_err (&flash->spi->dev,"error %d reading FSR\n" , + (int ) retval);Is the type-cast really needed here? Why ?
The type-cast looks clumsy.
The type of 'retval' is retval; thus, '%zd' can be used, instead of '%d', as below.
+ dev_err(&flash->spi->dev, "error %zd reading FSR\n",
+ retval);
Quoted 10 lines
Quoted 10 lines
drivers/mtd/devices/m25p80.c +6
-0+return retval; + } + +return val; +} +/* * Read configuration register, returning its value in the * location. Return the configuration register value. * Returns negative if error occured.
Quoted 8 lines
drivers/mtd/devices/m25p80.c static inline int set_4byte(struct m25p *flash, u32 jedec_id, int enable) · line 262
Quoted 6 lines
(quoted diff) +0
-0@@ -233,7 +259,7 @@ static inline int set_4byte(struct m25p *flash, u32
jedec_id, int enable) * Service routine to read status register until ready, or timeout occurs. * Returns non-zero if error.
*/drivers/mtd/devices/m25p80.c +1
-1-static int wait_till_ready (struct m25p *flash) +static int _wait_till_ready (struct m25p *flash)Please avoid using function names that start with underscore .
+1
I agree with Marek Vasut's opinion.
If there is no reason, please don't use it.
Best regards,
Jingoo Han
Quoted 6 lines
[...]
Thanks!
Best regards,
Marek Vasut
Re: [PATCH] Add support for flag status register on Micron chips.
Quoted 30 lines · Jingoo Han
Quoted 15 lines · Marek Vasut
Quoted 11 lines · On Tuesday, April 08, 2014 at 06:12:50 PM, [email protected] wrote:
From: Graham Moore <[email protected]>
Some new Micron flash chips require reading the flag status register to determine when operations have completed.
Furthermore, chips with multi-die stacks of the 65nm 256Mb QSPI also require reading the status register before reading the flag status register.
This patch adds support for the flag status register in the n25q512a1 and n25q00 Micron QSPI flash chips.
[...]
Quoted 13 lines
drivers/mtd/devices/m25p80.c static int read_sr(struct m25p *flash) · line 167
Quoted 11 lines
drivers/mtd/devices/m25p80.c +11
-0+static int read_fsr (struct m25p *flash) +{ +ssize_t retval; +u8 code =OPCODE_RDFSR ; +u8 val; + + retval =spi_write_then_read (flash->spi, &code,1 , &val,1 ); + +if (retval <0 ) { +dev_err (&flash->spi->dev,"error %d reading FSR\n" , + (int ) retval);Is the type-cast really needed here? Why ?
Quoted 2 lines
The type-cast looks clumsy.
The type of 'retval' is retval; thus, '%zd' can be used,
Sorry, there is a typo!
s/retval/ssize_t
The type of 'retval' is "ssize_t"; thus, '%zd' can be used, instead of '%d', as below.
+ dev_err(&flash->spi->dev, "error %zd reading FSR\n",
+ retval);
Best regards,
Jingoo Han
Quoted 12 lines · On Tuesday, April 08, 2014 at 06:12:49 PM, [email protected] wrote:
From: Graham Moore <[email protected]>
This is a slightly different version of the patch that Insop Song submitted
(http://marc.info/?i=201403012022.10111.marex%20()%20denx%20!%20de).I talked to Insop, and he agreed I should submit this patch as a follow-on to his.
This patch uses a flag in the m25p_ids[] array to determine which chips need to use the FSR (Flag Status Register).
Quoted 6 lines
Rationale for using the FSR:
The Micron data sheets say we have to do this, at least for the multi-die 512M and 1G parts (n25q512 and n25q00). In practice, if we don't check the FSR for program/erase status, and we rely solely on the status register (SR), then we get corrupted data in the flash.
I talked to Gerhard yesterday and he told me there is something like that on ONFI NAND. I think I now understand why that new register is in-place. Apparently, in the ONFI NAND case, there is a READY and TRUE-READY signal and one of those reflects that _all_ the dies have finished their operation. This is in my opinion seriously misdesigned as it breaks any kind of backward compatibility.
Quoted 4 lines
Micron told us (Altera) that for multi-die chips based on the 65nm 256MB die, we need to check the SR first, then check the FSR, which is why the
wait_for_fsr_readyfunction does that. Future chips based on 45 nm 512MB die will use the FSR only.
Can these SPI flash makers screw the design even more? OT: Why don't we have a single standard for all the SF chips which won't need all these crappy quirks :-(
Best regards,
Marek Vasut
Quoted 21 lines · Marek Vasut
Quoted 12 lines · On Tuesday, April 08, 2014 at 06:12:49 PM, [email protected] wrote:
From: Graham Moore <[email protected]>
This is a slightly different version of the patch that Insop Song submitted
(http://marc.info/?i=201403012022.10111.marex%20()%20denx%20!%20de).I talked to Insop, and he agreed I should submit this patch as a follow-on to his.
This patch uses a flag in the m25p_ids[] array to determine which chips need to use the FSR (Flag Status Register).
Quoted 6 lines
Rationale for using the FSR:
The Micron data sheets say we have to do this, at least for the multi-die 512M and 1G parts (n25q512 and n25q00). In practice, if we don't check the FSR for program/erase status, and we rely solely on the status register (SR), then we get corrupted data in the flash.
Quoted 6 lines
I talked to Gerhard yesterday and he told me there is something like that on ONFI NAND. I think I now understand why that new register is in-place. Apparently, in the ONFI NAND case, there is a READY and TRUE-READY signal and one of those reflects that _all_ the dies have finished their operation. This is in my opinion seriously misdesigned as it breaks any kind of backward compatibility.
There's a little more to it, I think.
The "ready" and "true ready" are terms from Linux header files. In Micron datasheets, both of the bits 5 and 6 in the READ_STATUS response are referred to as "ready/busy", with a few footnotes to them depending on the mode of operation or the command that is being executed.
The other thing is that there is the READ_STATUS command, which _might_ yield responses from different dies upon subsequent repeated reads. So you may have to determine how many dies are in the package, to repeat the STATUS query as many times, and logically combine these results in the chip's overall status. Or use the extended status query where you can address an individual die, but which is not supported by every chip. Pick your poison.
The hardware R/B pins are wired-OR, such that any busy die will pull the summary pin level low. But this only tells you whether the operation is still pending, after it's complete you have to get the status and will face the situation described above.
Can't tell how this NAND approach maps to the NOR subject described here. They might have a similar motivation, yet implement different approaches to the issue.
Quoted 4 lines
Quoted 4 lines
Micron told us (Altera) that for multi-die chips based on the 65nm 256MB die, we need to check the SR first, then check the FSR, which is why the
wait_for_fsr_readyfunction does that. Future chips based on 45 nm 512MB die will use the FSR only.
This sounds to me similar to polling the NAND's R/B pin until the operation has completed, to then fetch the STATUS byte to determine the execution's result. Does this sound plausible? For NOR, do you poll for the "busy" condition to deassert, and check for success then?
virtually yours
Gerhard Sittig
Signature · 3 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr. 5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [email protected]
Quoted 21 lines · Gerhard Sittig
Quoted 20 lines · Marek Vasut
Quoted 18 lines · On Tuesday, April 08, 2014 at 06:12:49 PM, [email protected] wrote:
From: Graham Moore <[email protected]>
This is a slightly different version of the patch that Insop Song submitted
(http://marc.info/?i=201403012022.10111.marex%20()%20denx%20!%20de).I talked to Insop, and he agreed I should submit this patch as a follow-on to his.
This patch uses a flag in the m25p_ids[] array to determine which chips need to use the FSR (Flag Status Register).
Rationale for using the FSR:
The Micron data sheets say we have to do this, at least for the multi-die 512M and 1G parts (n25q512 and n25q00). In practice, if we don't check the FSR for program/erase status, and we rely solely on the status register (SR), then we get corrupted data in the flash.
[...]
Quoted 10 lines
Quoted 4 lines
Quoted 4 lines
Micron told us (Altera) that for multi-die chips based on the 65nm 256MB die, we need to check the SR first, then check the FSR, which is why the
wait_for_fsr_readyfunction does that. Future chips based on 45 nm 512MB die will use the FSR only.This sounds to me similar to polling the NAND's R/B pin until the operation has completed, to then fetch the STATUS byte to determine the execution's result. Does this sound plausible? For NOR, do you poll for the "busy" condition to deassert, and check for success then?
Sounds plausible to me. We poll the SR until not busy, then poll the FSR until it's not busy. Success is when FSR busy is deasserted within the timeout.
Micron said we have to read the FSR "at least once", so we don't read it once for every die or anything like that. I ran a quick test, and for both the 2-die and 4-die parts, the FSR shows not busy on the first read after SR not busy.
-Graham
Quoted 35 lines · Graham Moore
Quoted 20 lines · Gerhard Sittig
Quoted 19 lines · Marek Vasut
Quoted 18 lines · On Tuesday, April 08, 2014 at 06:12:49 PM, [email protected] wrote:
From: Graham Moore <[email protected]>
This is a slightly different version of the patch that Insop Song submitted
(http://marc.info/?i=201403012022.10111.marex%20()%20denx%20!%20de).I talked to Insop, and he agreed I should submit this patch as a follow-on to his.
This patch uses a flag in the m25p_ids[] array to determine which chips need to use the FSR (Flag Status Register).
Rationale for using the FSR:
The Micron data sheets say we have to do this, at least for the multi-die 512M and 1G parts (n25q512 and n25q00). In practice, if we don't check the FSR for program/erase status, and we rely solely on the status register (SR), then we get corrupted data in the flash.
[...]
Quoted 10 lines
Quoted 4 lines
Quoted 4 lines
Micron told us (Altera) that for multi-die chips based on the 65nm 256MB die, we need to check the SR first, then check the FSR, which is why the
wait_for_fsr_readyfunction does that. Future chips based on 45 nm 512MB die will use the FSR only.This sounds to me similar to polling the NAND's R/B pin until the operation has completed, to then fetch the STATUS byte to determine the execution's result. Does this sound plausible? For NOR, do you poll for the "busy" condition to deassert, and check for success then?
Quoted 8 lines
Sounds plausible to me. We poll the SR until not busy, then poll the FSR until it's not busy. Success is when FSR busy is deasserted within the timeout.
Micron said we have to read the FSR "at least once", so we don't read it once for every die or anything like that. I ran a quick test, and for both the 2-die and 4-die parts, the FSR shows not busy on the first read after SR not busy.
I'd love to know how this FSR-not-busy is exactly related to SR-not-busy, but I guess only Micron can tell :-/
Best regards,
Marek Vasut