defconfig on daisy
Hi
I have a linux-yocto_3.14.bbappend file in my local layer. Basically it just specifies the defconfig for the kernel.
The problem now is just that defconfig is not used for the specific kernel. It's copied into ${WORKDIR} but never used.
Have procedures on how to do this changed since dora - or is somthing broken?
Signature · 1 line
Søren Holm
Quoted 9 lines · Søren Holm
Hi
I have a linux-yocto_3.14.bbappend file in my local layer. Basically it just specifies the defconfig for the kernel.
The problem now is just that defconfig is not used for the specific kernel. It's copied into ${WORKDIR} but never used.
Have procedures on how to do this changed since dora - or is somthing broken?
Nothing has changed in this area, and it works here. Can you post your defconfig, and machine you are building somewhere so I can try it myself ?
Bruce
Quoted 2 lines
Sure
I guess this is what you need :
http://sgh.dk/~sgh/cb16_kernel.tar.bz2
It's just the machine-configuration and my append-file and defconfig.
Fredag den 11. april 2014 00:19:15 skrev Bruce Ashfield:
Quoted 5 lines
Nothing has changed in this area, and it works here. Can you post your defconfig, and machine you are building somewhere so I can try it myself ?
Bruce
Signature · 1 line
Søren Holm
Quoted 7 lines · Søren Holm
Sure
I guess this is what you need :
http://sgh.dk/~sgh/cb16_kernel.tar.bz2
It's just the machine-configuration and my append-file and defconfig.
replying again .. with the list this time.
Great. I did a build here and I see the defconfig being applied. How were you determining that it wasn't happening ? I want to make sure I'm checking the same config options.
Bruce
Quoted 8 lines
Fredag den 11. april 2014 00:19:15 skrev Bruce Ashfield:
Quoted 5 lines
Nothing has changed in this area, and it works here. Can you post your defconfig, and machine you are building somewhere so I can try it myself ?
Bruce
Hi Bruce
I just check if AUFS is enabled. It should be since that's in my defconfig.
Fredag den 11. april 2014 09:49:29 skrev Bruce Ashfield:
Quoted 15 lines · Søren Holm
Quoted 7 lines
Sure
I guess this is what you need :
http://sgh.dk/~sgh/cb16_kernel.tar.bz2
It's just the machine-configuration and my append-file and defconfig.
replying again .. with the list this time.
Great. I did a build here and I see the defconfig being applied. How were you determining that it wasn't happening ? I want to make sure I'm checking the same config options.
Signature · 1 line
Søren Holm
Quoted 3 lines · Søren Holm
Hi Bruce
I just check if AUFS is enabled. It should be since that's in my defconfig.
ok, here's my output:
yow-bashfiel-d3 [/home/bruc...957655f-r0]> grep AUFS linux-cb16-standard-build/.config CONFIG_AUFS_FS=yCONFIG_AUFS_BRANCH_MAX_127=y
# CONFIG_AUFS_BRANCH_MAX_511 is not set
# CONFIG_AUFS_BRANCH_MAX_1023 is not set
# CONFIG_AUFS_BRANCH_MAX_32767 is not setCONFIG_AUFS_SBILIST=y
# CONFIG_AUFS_HNOTIFY is not set
# CONFIG_AUFS_RDU is not set
# CONFIG_AUFS_PROC_MAP is not set
# CONFIG_AUFS_SP_IATTR is not set
# CONFIG_AUFS_SHWH is not set
# CONFIG_AUFS_BR_RAMFS is not setCONFIG_AUFS_BDEV_LOOP=y
# CONFIG_AUFS_DEBUG is not set
Cheers,
Bruce
Quoted 17 lines
Fredag den 11. april 2014 09:49:29 skrev Bruce Ashfield:
Quoted 15 lines · Søren Holm
Quoted 7 lines
Sure
I guess this is what you need :
http://sgh.dk/~sgh/cb16_kernel.tar.bz2
It's just the machine-configuration and my append-file and defconfig.
replying again .. with the list this time.
Great. I did a build here and I see the defconfig being applied. How were you determining that it wasn't happening ? I want to make sure I'm checking the same config options.
Hi Bruce
I just realized that I gave you the wrong files. I migrate to dora, so 3.14 is my kernel I'm building. I gave you the dora-files - doh!. I'll check if 3.10 works because it does for you on daisy and for me on dora.
Fredag den 11. april 2014 11:05:44 skrev Bruce Ashfield:
Quoted 6 lines · Søren Holm
Quoted 4 lines
Hi Bruce
I just check if AUFS is enabled. It should be since that's in my defconfig.
Signature · 1 line
Søren Holm
Quoted 5 lines · Søren Holm
Hi Bruce
I just realized that I gave you the wrong files. I migrate to dora, so 3.14 is my kernel I'm building. I gave you the dora-files - doh!. I'll check if 3.10 works because it does for you on daisy and for me on dora.
No worries. I just forced the kernel version to 3.10 to test. If you want to send the 3.14 ones, I can double check there as well.
Bruce
Quoted 9 lines
Fredag den 11. april 2014 11:05:44 skrev Bruce Ashfield:
Quoted 6 lines · Søren Holm
Quoted 4 lines
Hi Bruce
I just check if AUFS is enabled. It should be since that's in my defconfig.
Ok
Using the *exact* same bbappend file for both 3.10 and 3.14 gives me a correct -config for 3.10 but not for 3.14. Both 3.10/defconfig and 3.14/defconfig contains my original defconfig, so it is picked up and should be taken into account.
Fredag den 11. april 2014 11:24:10 skrev Bruce Ashfield:
Quoted 18 lines · Søren Holm
Quoted 5 lines
Hi Bruce
I just realized that I gave you the wrong files. I migrate to dora, so 3.14 is my kernel I'm building. I gave you the dora-files - doh!. I'll check if 3.10 works because it does for you on daisy and for me on dora.
No worries. I just forced the kernel version to 3.10 to test. If you want to send the 3.14 ones, I can double check there as well.
Bruce
Quoted 6 lines
Fredag den 11. april 2014 11:05:44 skrev Bruce Ashfield:
Quoted 5 lines · Søren Holm
Quoted 4 lines
Hi Bruce
I just check if AUFS is enabled. It should be since that's in my defconfig.
Signature · 1 line
Søren Holm
Quoted 6 lines · Søren Holm
Ok
Using the *exact* same bbappend file for both 3.10 and 3.14 gives me a correct -config for 3.10 but not for 3.14. Both 3.10/defconfig and 3.14/defconfig contains my original defconfig, so it is picked up and should be taken into account.
This is a slightly different problem .. I can see that I managed to drop a patch which links AUFS into the build. Hence why everything is dropped.
I'm fixing that right now in 3.14, and will send updates later.
Bruce
Quoted 21 lines
Fredag den 11. april 2014 11:24:10 skrev Bruce Ashfield:
Quoted 18 lines · Søren Holm
Quoted 5 lines
Hi Bruce
I just realized that I gave you the wrong files. I migrate to dora, so 3.14 is my kernel I'm building. I gave you the dora-files - doh!. I'll check if 3.10 works because it does for you on daisy and for me on dora.
No worries. I just forced the kernel version to 3.10 to test. If you want to send the 3.14 ones, I can double check there as well.
Bruce
Quoted 6 lines
Fredag den 11. april 2014 11:05:44 skrev Bruce Ashfield:
Quoted 5 lines · Søren Holm
Quoted 4 lines
Hi Bruce
I just check if AUFS is enabled. It should be since that's in my defconfig.
Hi Bruce
That sounds great. The situation is that I though that that was the case, so I also tried adding this to the bbappend.
KERNEL_FEATURES_append = " features/aufs"
But that does not seem to work either. So I guess you are talking about somthing else.
Fredag den 11. april 2014 12:51:01 skrev Bruce Ashfield:
Quoted 14 lines · Søren Holm
Quoted 6 lines
Ok
Using the *exact* same bbappend file for both 3.10 and 3.14 gives me a correct -config for 3.10 but not for 3.14. Both 3.10/defconfig and 3.14/defconfig contains my original defconfig, so it is picked up and should be taken into account.
This is a slightly different problem .. I can see that I managed to drop a patch which links AUFS into the build. Hence why everything is dropped.
I'm fixing that right now in 3.14, and will send updates later.
Signature · 1 line
Søren Holm
Quoted 9 lines · Søren Holm
Hi Bruce
That sounds great. The situation is that I though that that was the case, so I also tried adding this to the bbappend.
KERNEL_FEATURES_append= " features/aufs"But that does not seem to work either. So I guess you are talking about somthing else.
I am. There's a missing patch that I typically carry, it actually links the fs/aufs directory into the build. Without it, the Kconfig and code isn't processed .. hence why everything is dropped.
I have it merged now, but have to build aufs for all architectures to make sure nothing broke.
Bruce
Quoted 17 lines
Fredag den 11. april 2014 12:51:01 skrev Bruce Ashfield:
Quoted 14 lines · Søren Holm
Quoted 6 lines
Ok
Using the *exact* same bbappend file for both 3.10 and 3.14 gives me a correct -config for 3.10 but not for 3.14. Both 3.10/defconfig and 3.14/defconfig contains my original defconfig, so it is picked up and should be taken into account.
This is a slightly different problem .. I can see that I managed to drop a patch which links AUFS into the build. Hence why everything is dropped.
I'm fixing that right now in 3.14, and will send updates later.
Hi Bruce
I've search the meta-data repos and kernel repo for a change matching this. Is it fixes or did you miss it?
Fredag den 11. april 2014 15:05:56 skrev Bruce Ashfield:
Quoted 8 lines
I am. There's a missing patch that I typically carry, it actually links the fs/aufs directory into the build. Without it, the
Kconfigand code isn't processed .. hence why everything is dropped.I have it merged now, but have to build aufs for all architectures to make sure nothing broke.
Signature · 1 line
Søren Holm
Quoted 4 lines · Søren Holm
Hi Bruce
I've search the meta-data repos and kernel repo for a change matching this. Is it fixes or did you miss it?
The change is:
It didn't make it into the 1.6 release branch, it will go in for 1.6.1 and is queued for there and master.
Cheers,
Richard
Thanks Richard.
Tirsdag den 22. april 2014 09:46:04 skrev Richard Purdie:
Quoted 17 lines · Søren Holm
Quoted 4 lines
Hi Bruce
I've search the meta-data repos and kernel repo for a change matching this. Is it fixes or did you miss it?
The change is:
http://git.yoctoproject.org/cgit.cgi/poky-contrib/commit/?h=zedd/kernel&id=a
112c85c02f161dc03bf71cdb9d2b3557999bbfdIt didn't make it into the 1.6 release branch, it will go in for 1.6.1 and is queued for there and master.
Cheers,
Richard
Signature · 1 line
Søren Holm