Skip to contentSkip to conversation

drm: Check CRTC compatibility in setplane

PATCH In review Matt Roper 3 participants 7 messages Apr 23, 2014

Subsystems (3)
lore
Share & tools
lore

Matt Roper

author
#0 lore raw

PATCH 1/3 drm: Check CRTC compatibility in setplane

The DRM core setplane code should check that the plane is usable on the specified CRTC before calling into the driver.

Prior to this patch, a plane's possible_crtcs field was purely informational for userspace and was never actually verified at the kernel level (aside from the primary plane helper).

---
 drivers/gpu/drm/drm_crtc.c         | 7 +++++++
 drivers/gpu/drm/drm_plane_helper.c | 6 ------
 2 files changed, 7 insertions(+), 6 deletions(-)
drivers/gpu/drm/drm_crtc.c +7 -0
index 461d19b..b6d6c04 100644
@@ -2140,6 +2140,13 @@ int drm_mode_setplane(struct drm_device *dev, void *data,
 	}
 	crtc = obj_to_crtc(obj);
 
+	/* Check whether this plane is usable on this CRTC */
+	if (!(plane->possible_crtcs & drm_crtc_mask(crtc))) {
+		DRM_DEBUG_KMS("Invalid crtc for plane\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
 	fb = drm_framebuffer_lookup(dev, plane_req->fb_id);
 	if (!fb) {
 		DRM_DEBUG_KMS("Unknown framebuffer ID %d\n",
drivers/gpu/drm/drm_plane_helper.c +0 -6
index b72736d..65c4a00 100644
@@ -137,12 +137,6 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
 		return -EINVAL;
 	}
 
-	/* Primary planes are locked to their owning CRTC */
-	if (plane->possible_crtcs != drm_crtc_mask(crtc)) {
-		DRM_DEBUG_KMS("Cannot change primary plane CRTC\n");
-		return -EINVAL;
-	}
-
 	/* Disallow scaling */
 	src_w >>= 16;
 	src_h >>= 16;
Signature · 1 line
1.8.5.1
author
#1 lore raw

PATCH 2/3 drm/plane-helper: Add drm_primary_helper_check_update()

Pull the parameter checking from drm_primary_helper_update() out into its own function; drivers that provide their own setplane() implementations rather than using the helper may still want to share this parameter checking logic.

A few of the checks here were also updated based on suggestions by Ville Syrjälä.

---
 drivers/gpu/drm/drm_plane_helper.c | 148 +++++++++++++++++++++++++++++--------
 include/drm/drm_plane_helper.h     |   9 +++
 2 files changed, 128 insertions(+), 29 deletions(-)
drivers/gpu/drm/drm_plane_helper.c +119 -29
index 65c4a00..9bbbdf2 100644
@@ -66,6 +66,102 @@ static int get_connectors_for_crtc(struct drm_crtc *crtc,
 }
 
 /**
+ * drm_primary_helper_check_update() - Check primary plane update for validity
+ * @plane: plane object to update
+ * @crtc: owning CRTC of owning plane
+ * @fb: framebuffer to flip onto plane
+ * @crtc_x: x offset of primary plane on crtc
+ * @crtc_y: y offset of primary plane on crtc
+ * @crtc_w: width of primary plane rectangle on crtc
+ * @crtc_h: height of primary plane rectangle on crtc
+ * @src_x: x offset of @fb for panning
+ * @src_y: y offset of @fb for panning
+ * @src_w: width of source rectangle in @fb
+ * @src_h: height of source rectangle in @fb
+ * @can_scale: is primary plane scaling legal?
+ * @can_position: is it legal to position the primary plane such that it
+ *                doesn't cover the entire crtc?
+ *
+ * Checks that a desired primary plane update is valid.  Drivers that provide
+ * their own primary plane handling may still wish to call this function to
+ * avoid duplication of error checking code.
+ *
+ * RETURNS:
+ * Zero if update appears valid, error code on failure
+ */
+int drm_primary_helper_check_update(struct drm_plane *plane,
+				    struct drm_crtc *crtc,
+				    struct drm_framebuffer *fb,
+				    int crtc_x, int crtc_y,
+				    unsigned int crtc_w, unsigned int crtc_h,
+				    uint32_t src_x, uint32_t src_y,
+				    uint32_t src_w, uint32_t src_h,
+				    bool can_scale,
+				    bool can_position)
+{
+	struct drm_rect dest = {
+		.x1 = crtc_x,
+		.y1 = crtc_y,
+		.x2 = crtc_x + crtc_w,
+		.y2 = crtc_y + crtc_h,
+	};
+	struct drm_rect src = {
+		.x1 = src_x >> 16,
+		.y1 = src_y >> 16,
+		.x2 = (src_x + src_w) >> 16,
+		.y2 = (src_y + src_h) >> 16,
+	};
+	const struct drm_rect clip = {
+		.x2 = crtc->mode.hdisplay,
+		.y2 = crtc->mode.vdisplay,
+	};
+	int hscale, vscale;
+	int visible;
+
+	if (!crtc->enabled) {
+		DRM_DEBUG_KMS("Cannot update primary plane of a disabled CRTC.\n");
+		return -EINVAL;
+	}
+
+	/* setplane API takes shifted source rectangle values; unshift them */
+	src_x >>= 16;
+	src_y >>= 16;
+	src_w >>= 16;
+	src_h >>= 16;
+
+	/* check scaling */
+	if (!can_scale && (crtc_w != src_w || crtc_h != src_h)) {
+		DRM_DEBUG_KMS("Can't scale primary plane\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Drivers that can scale should perform their own min/max scale
+	 * factor checks.
+	 */
+	hscale = drm_rect_calc_hscale(&src, &dest, 0, INT_MAX);
+	vscale = drm_rect_calc_vscale(&src, &dest, 0, INT_MAX);
+	visible = drm_rect_clip_scaled(&src, &dest, &clip, hscale, vscale);
+	if (!visible)
+		/*
+		 * Primary plane isn't visible; some drivers can handle this
+		 * so we just return success here.  Drivers that can't
+		 * (including those that use the primary plane helper's
+		 * update function) will return an error from their
+		 * update_plane handler.
+		 */
+		return 0;
+
+	if (!can_position && !drm_rect_equals(&dest, &clip)) {
+		DRM_DEBUG_KMS("Primary plane must cover entire CRTC\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_primary_helper_check_update);
+
+/**
  * drm_primary_helper_update() - Helper for primary plane update
  * @plane: plane object to update
  * @crtc: owning CRTC of owning plane
@@ -113,6 +209,12 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
 		.x = src_x >> 16,
 		.y = src_y >> 16,
 	};
+	struct drm_rect src = {
+		.x1 = src_x >> 16,
+		.y1 = src_y >> 16,
+		.x2 = (src_x + src_w) >> 16,
+		.y2 = (src_y + src_h) >> 16,
+	};
 	struct drm_rect dest = {
 		.x1 = crtc_x,
 		.y1 = crtc_y,
@@ -124,40 +226,28 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
 		.y2 = crtc->mode.vdisplay,
 	};
 	struct drm_connector **connector_list;
+	int visible;
+	int hscale, vscale;
 	int num_connectors, ret;
 
-	if (!crtc->enabled) {
-		DRM_DEBUG_KMS("Cannot update primary plane of a disabled CRTC.\n");
-		return -EINVAL;
-	}
-
-	/* Disallow subpixel positioning */
-	if ((src_x | src_y | src_w | src_h) & SUBPIXEL_MASK) {
-		DRM_DEBUG_KMS("Primary plane does not support subpixel positioning\n");
-		return -EINVAL;
-	}
-
-	/* Disallow scaling */
-	src_w >>= 16;
-	src_h >>= 16;
-	if (crtc_w != src_w || crtc_h != src_h) {
-		DRM_DEBUG_KMS("Can't scale primary plane\n");
-		return -EINVAL;
-	}
-
-	/* Make sure primary plane covers entire CRTC */
-	drm_rect_intersect(&dest, &clip);
-	if (dest.x1 != 0 || dest.y1 != 0 ||
-	    dest.x2 != crtc->mode.hdisplay || dest.y2 != crtc->mode.vdisplay) {
-		DRM_DEBUG_KMS("Primary plane must cover entire CRTC\n");
-		return -EINVAL;
-	}
-
-	/* Framebuffer must be big enough to cover entire plane */
-	ret = drm_crtc_check_viewport(crtc, crtc_x, crtc_y, &crtc->mode, fb);
+	ret = drm_primary_helper_check_update(plane, crtc, fb,
+					      crtc_x, crtc_y, crtc_w, crtc_h,
+					      src_x, src_y, src_w, src_h,
+					      false, false);
 	if (ret)
 		return ret;
 
+	hscale = drm_rect_calc_hscale(&src, &dest, 0, INT_MAX);
+	vscale = drm_rect_calc_vscale(&src, &dest, 0, INT_MAX);
+	visible = drm_rect_clip_scaled(&src, &dest, &clip, hscale, vscale);
+	if (!visible)
+		/*
+		 * Primary plane isn't visible.  Note that unless a driver
+		 * provides their own disable function, this will just
+		 * wind up returning -EINVAL to userspace.
+		 */
+		return plane->funcs->disable_plane(plane);
+
 	/* Find current connectors for CRTC */
 	num_connectors = get_connectors_for_crtc(crtc, NULL, 0);
 	BUG_ON(num_connectors == 0);
include/drm/drm_plane_helper.h +9 -0
index 09824be..373201a 100644
@@ -31,6 +31,15 @@
  * planes.
  */
 
+extern int drm_primary_helper_check_update(struct drm_plane *plane,
+					   struct drm_crtc *crtc,
+					   struct drm_framebuffer *fb,
+					   int crtc_x, int crtc_y,
+					   unsigned int crtc_w, unsigned int crtc_h,
+					   uint32_t src_x, uint32_t src_y,
+					   uint32_t src_w, uint32_t src_h,
+					   bool can_scale,
+					   bool can_position);
 extern int drm_primary_helper_update(struct drm_plane *plane,
 				     struct drm_crtc *crtc,
 				     struct drm_framebuffer *fb,
Signature · 6 lines
1.8.5.1

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
#2 lore raw

Re: [PATCH 2/3] drm/plane-helper: Add drm_primary_helper_check_update()

Quoted 58 lines · Matt Roper

Pull the parameter checking from drm_primary_helper_update() out into its own function; drivers that provide their own setplane() implementations rather than using the helper may still want to share this parameter checking logic.

A few of the checks here were also updated based on suggestions by Ville Syrjälä.

---
 drivers/gpu/drm/drm_plane_helper.c | 148 +++++++++++++++++++++++++++++--------
 include/drm/drm_plane_helper.h     |   9 +++
 2 files changed, 128 insertions(+), 29 deletions(-)
drivers/gpu/drm/drm_plane_helper.c +34 -0
index 65c4a00..9bbbdf2 100644
@@ -66,6 +66,102 @@ static int get_connectors_for_crtc(struct drm_crtc *crtc,
 }
 
 /**
+ * drm_primary_helper_check_update() - Check primary plane update for validity
+ * @plane: plane object to update
+ * @crtc: owning CRTC of owning plane
+ * @fb: framebuffer to flip onto plane
+ * @crtc_x: x offset of primary plane on crtc
+ * @crtc_y: y offset of primary plane on crtc
+ * @crtc_w: width of primary plane rectangle on crtc
+ * @crtc_h: height of primary plane rectangle on crtc
+ * @src_x: x offset of @fb for panning
+ * @src_y: y offset of @fb for panning
+ * @src_w: width of source rectangle in @fb
+ * @src_h: height of source rectangle in @fb
+ * @can_scale: is primary plane scaling legal?
+ * @can_position: is it legal to position the primary plane such that it
+ *                doesn't cover the entire crtc?
+ *
+ * Checks that a desired primary plane update is valid.  Drivers that provide
+ * their own primary plane handling may still wish to call this function to
+ * avoid duplication of error checking code.
+ *
+ * RETURNS:
+ * Zero if update appears valid, error code on failure
+ */
+int drm_primary_helper_check_update(struct drm_plane *plane,
+				    struct drm_crtc *crtc,
+				    struct drm_framebuffer *fb,
+				    int crtc_x, int crtc_y,
+				    unsigned int crtc_w, unsigned int crtc_h,
+				    uint32_t src_x, uint32_t src_y,
+				    uint32_t src_w, uint32_t src_h,
+				    bool can_scale,
+				    bool can_position)
+{
+	struct drm_rect dest = {

drivers/gpu/drm/drm_plane_helper.c static int get_connectors_for_crtc(struct drm_crtc *crtc, · line 112

Quoted 10 lines
drivers/gpu/drm/drm_plane_helper.c +10 -0
+		.x1 = crtc_x,
+		.y1 = crtc_y,
+		.x2 = crtc_x + crtc_w,
+		.y2 = crtc_y + crtc_h,
+	};
+	struct drm_rect src = {
+		.x1 = src_x >> 16,
+		.y1 = src_y >> 16,
+		.x2 = (src_x + src_w) >> 16,
+		.y2 = (src_y + src_h) >> 16,

I think you want '(x>>16) + (y>>16)' instead. Otherwise you may end up increasing the source width/height.

drivers/gpu/drm/drm_plane_helper.c static int get_connectors_for_crtc(struct drm_crtc *crtc, · line 124

Quoted 12 lines
drivers/gpu/drm/drm_plane_helper.c +12 -0
+	};
+	const struct drm_rect clip = {
+		.x2 = crtc->mode.hdisplay,
+		.y2 = crtc->mode.vdisplay,
+	};
+	int hscale, vscale;
+	int visible;
+
+	if (!crtc->enabled) {
+		DRM_DEBUG_KMS("Cannot update primary plane of a disabled CRTC.\n");
+		return -EINVAL;
+	}

We allow this for sprites, so I'd allow it for everything. I'd be fine with leaving this restriction in drm_primary_helper_update() simply because I have no interst in auditing every other driver.

Although I think we still overwrite the primary plane configure during setcrtc. We should really change that so that the user can pre-configure all the planes and then watch them pop into view during a modeset as previously configured.

Quoted 10 lines
drivers/gpu/drm/drm_plane_helper.c +10 -0
+
+	/* setplane API takes shifted source rectangle values; unshift them */
+	src_x >>= 16;
+	src_y >>= 16;
+	src_w >>= 16;
+	src_h >>= 16;
+
+	/* check scaling */
+	if (!can_scale && (crtc_w != src_w || crtc_h != src_h)) {
+		DRM_DEBUG_KMS("Can't scale primary plane\n");

drivers/gpu/drm/drm_plane_helper.c static int get_connectors_for_crtc(struct drm_crtc *crtc, · line 144

Quoted 10 lines
drivers/gpu/drm/drm_plane_helper.c +10 -0
+		return -EINVAL;
+	}
+
+	/*
+	 * Drivers that can scale should perform their own min/max scale
+	 * factor checks.
+	 */
+	hscale = drm_rect_calc_hscale(&src, &dest, 0, INT_MAX);
+	vscale = drm_rect_calc_vscale(&src, &dest, 0, INT_MAX);
+	visible = drm_rect_clip_scaled(&src, &dest, &clip, hscale, vscale);

w/o sub-pixel coordinates the scaling factors will be truncated to integers, which makes the clipping rather bogus if the plane can actually scale. I think I'd just make this code assume that scaling isn't supported, and if the driver supports scaling it can just implent the appropriate code itself. We can try to refactor some of the scaling aware code from intel_sprite later if warranted.

But I'm starting to question the usefulness of this function. We anyway have to reclip in i915 code due to stereo/doublewide/etc, and actually you also reclip in the plane helper since the clipped coordinates aren't passed back to the caller. In order to avoid the extra work, I'd just have the caller pass in all the drm_rects. That would actually make this function useful even for i915 since you could then pass the correct clip rect rather than assume that it comes from crtc->mode.

Quoted 116 lines
drivers/gpu/drm/drm_plane_helper.c +43 -29
+	if (!visible)
+		/*
+		 * Primary plane isn't visible; some drivers can handle this
+		 * so we just return success here.  Drivers that can't
+		 * (including those that use the primary plane helper's
+		 * update function) will return an error from their
+		 * update_plane handler.
+		 */
+		return 0;
+
+	if (!can_position && !drm_rect_equals(&dest, &clip)) {
+		DRM_DEBUG_KMS("Primary plane must cover entire CRTC\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_primary_helper_check_update);
+
+/**
  * drm_primary_helper_update() - Helper for primary plane update
  * @plane: plane object to update
  * @crtc: owning CRTC of owning plane
@@ -113,6 +209,12 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
 		.x = src_x >> 16,
 		.y = src_y >> 16,
 	};
+	struct drm_rect src = {
+		.x1 = src_x >> 16,
+		.y1 = src_y >> 16,
+		.x2 = (src_x + src_w) >> 16,
+		.y2 = (src_y + src_h) >> 16,
+	};
 	struct drm_rect dest = {
 		.x1 = crtc_x,
 		.y1 = crtc_y,
@@ -124,40 +226,28 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
 		.y2 = crtc->mode.vdisplay,
 	};
 	struct drm_connector **connector_list;
+	int visible;
+	int hscale, vscale;
 	int num_connectors, ret;
 
-	if (!crtc->enabled) {
-		DRM_DEBUG_KMS("Cannot update primary plane of a disabled CRTC.\n");
-		return -EINVAL;
-	}
-
-	/* Disallow subpixel positioning */
-	if ((src_x | src_y | src_w | src_h) & SUBPIXEL_MASK) {
-		DRM_DEBUG_KMS("Primary plane does not support subpixel positioning\n");
-		return -EINVAL;
-	}
-
-	/* Disallow scaling */
-	src_w >>= 16;
-	src_h >>= 16;
-	if (crtc_w != src_w || crtc_h != src_h) {
-		DRM_DEBUG_KMS("Can't scale primary plane\n");
-		return -EINVAL;
-	}
-
-	/* Make sure primary plane covers entire CRTC */
-	drm_rect_intersect(&dest, &clip);
-	if (dest.x1 != 0 || dest.y1 != 0 ||
-	    dest.x2 != crtc->mode.hdisplay || dest.y2 != crtc->mode.vdisplay) {
-		DRM_DEBUG_KMS("Primary plane must cover entire CRTC\n");
-		return -EINVAL;
-	}
-
-	/* Framebuffer must be big enough to cover entire plane */
-	ret = drm_crtc_check_viewport(crtc, crtc_x, crtc_y, &crtc->mode, fb);
+	ret = drm_primary_helper_check_update(plane, crtc, fb,
+					      crtc_x, crtc_y, crtc_w, crtc_h,
+					      src_x, src_y, src_w, src_h,
+					      false, false);
 	if (ret)
 		return ret;
 
+	hscale = drm_rect_calc_hscale(&src, &dest, 0, INT_MAX);
+	vscale = drm_rect_calc_vscale(&src, &dest, 0, INT_MAX);
+	visible = drm_rect_clip_scaled(&src, &dest, &clip, hscale, vscale);
+	if (!visible)
+		/*
+		 * Primary plane isn't visible.  Note that unless a driver
+		 * provides their own disable function, this will just
+		 * wind up returning -EINVAL to userspace.
+		 */
+		return plane->funcs->disable_plane(plane);
+
 	/* Find current connectors for CRTC */
 	num_connectors = get_connectors_for_crtc(crtc, NULL, 0);
 	BUG_ON(num_connectors == 0);
include/drm/drm_plane_helper.h +9 -0
index 09824be..373201a 100644
@@ -31,6 +31,15 @@
  * planes.
  */
 
+extern int drm_primary_helper_check_update(struct drm_plane *plane,
+					   struct drm_crtc *crtc,
+					   struct drm_framebuffer *fb,
+					   int crtc_x, int crtc_y,
+					   unsigned int crtc_w, unsigned int crtc_h,
+					   uint32_t src_x, uint32_t src_y,
+					   uint32_t src_w, uint32_t src_h,
+					   bool can_scale,
+					   bool can_position);
 extern int drm_primary_helper_update(struct drm_plane *plane,
 				     struct drm_crtc *crtc,
 				     struct drm_framebuffer *fb,
Signature · 1 line
1.8.5.1
Signature · 2 lines
Ville Syrjälä
Intel OTC
author
#3 lore raw

PATCH 3/3 drm/i915: Intel-specific primary plane handling (v5)

In reply to Matt Roper

Intel hardware allows the primary plane to be disabled independently of the CRTC. Provide custom primary plane handling to allow this.

v5:
- Use new drm_primary_helper_check_update() helper function to check setplane parameter validity.
- Swap primary plane's pipe for pre-gen4 FBC (caught by Ville Syrjälä)
- Cleanup primary plane properly on crtc init failure
v4:
- Don't add a primary_plane field to intel_crtc; that was left over from a much earlier iteration of this patch series, but is no longer needed/used now that the DRM core primary plane support has been merged.
v3:
- Provide gen-specific primary plane format lists (suggested by Daniel Vetter).
- If the primary plane is already enabled, go ahead and just call the primary plane helper to do the update (suggested by Daniel Vetter).
- Don't try to disable the primary plane on destruction; the DRM layer should have already taken care of this for us.
v2:
- Unpin fb properly on primary plane disable
- Provide an Intel-specific set of primary plane formats
- Additional sanity checks on setplane (in line with the checks currently being done by the DRM core primary plane helper)

---
 drivers/gpu/drm/i915/intel_display.c | 161 ++++++++++++++++++++++++++++++++++-
 1 file changed, 159 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_display.c +159 -2
index b57210c..ca83970 100644
@@ -39,8 +39,35 @@
 #include "i915_trace.h"
 #include <drm/drm_dp_helper.h>
 #include <drm/drm_crtc_helper.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drm_rect.h>
 #include <linux/dma_remapping.h>
 
+/* Primary plane formats supported by all gen */
+#define COMMON_PRIMARY_FORMATS \
+	DRM_FORMAT_C8, \
+	DRM_FORMAT_RGB565, \
+	DRM_FORMAT_XRGB8888, \
+	DRM_FORMAT_ARGB8888
+
+/* Primary plane formats for gen <= 3 */
+static const uint32_t intel_primary_formats_gen3[] = {
+	COMMON_PRIMARY_FORMATS,
+	DRM_FORMAT_XRGB1555,
+	DRM_FORMAT_ARGB1555,
+};
+
+/* Primary plane formats for gen >= 4 */
+static const uint32_t intel_primary_formats_gen4[] = {
+	COMMON_PRIMARY_FORMATS, \
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_XRGB2101010,
+	DRM_FORMAT_ARGB2101010,
+	DRM_FORMAT_XBGR2101010,
+	DRM_FORMAT_ABGR2101010,
+};
+
 static void intel_increase_pllclock(struct drm_crtc *crtc);
 static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
 
@@ -10543,17 +10570,147 @@ static void intel_shared_dpll_init(struct drm_device *dev)
 	BUG_ON(dev_priv->num_shared_dpll > I915_NUM_PLLS);
 }
 
+static int
+intel_primary_plane_disable(struct drm_plane *plane)
+{
+	struct drm_device *dev = plane->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	struct intel_crtc *intel_crtc;
+
+	if (WARN_ON(!plane->crtc))
+		return -EINVAL;
+
+	intel_crtc = to_intel_crtc(plane->crtc);
+	if (!intel_crtc->primary_enabled)
+		return 0;
+
+	intel_disable_primary_hw_plane(dev_priv, intel_plane->plane,
+				       intel_plane->pipe);
+
+	/*
+	 * N.B. The DRM setplane code will update the plane->fb pointer after
+	 * we finish here.
+	 */
+	intel_unpin_fb_obj(to_intel_framebuffer(plane->fb)->obj);
+
+	return 0;
+}
+
+static int
+intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc,
+			     struct drm_framebuffer *fb, int crtc_x, int crtc_y,
+			     unsigned int crtc_w, unsigned int crtc_h,
+			     uint32_t src_x, uint32_t src_y,
+			     uint32_t src_w, uint32_t src_h)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_rect dest = {
+		.x1 = crtc_x,
+		.y1 = crtc_y,
+		.x2 = crtc_x + crtc_w,
+		.y2 = crtc_y + crtc_h,
+	};
+	struct drm_rect src = {
+		.x1 = src_x >> 16,
+		.y1 = src_y >> 16,
+		.x2 = (src_x + src_w) >> 16,
+		.y2 = (src_y + src_h) >> 16,
+	};
+	const struct drm_rect clip = {
+		.x2 = intel_crtc->config.pipe_src_w,
+		.y2 = intel_crtc->config.pipe_src_h,
+	};
+	int visible;
+	int ret;
+
+	ret = drm_primary_helper_check_update(plane, crtc, fb,
+					      crtc_x, crtc_y, crtc_w, crtc_h,
+					      src_x, src_y, src_w, src_h,
+					      false, false);
+	if (ret)
+		return ret;
+
+	visible = drm_rect_clip_scaled(&src, &dest, &clip, 1, 1);
+	if (!visible)
+		return intel_primary_plane_disable(plane);
+
+	ret = intel_pipe_set_base(crtc, src.x1, src.y1, fb);
+	if (ret)
+		return ret;
+
+	if (!intel_crtc->primary_enabled)
+		intel_enable_primary_hw_plane(dev_priv, intel_crtc->plane,
+					      intel_crtc->pipe);
+
+	return 0;
+}
+
+static void intel_primary_plane_destroy(struct drm_plane *plane)
+{
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	drm_plane_cleanup(plane);
+	kfree(intel_plane);
+}
+
+static const struct drm_plane_funcs intel_primary_plane_funcs = {
+	.update_plane = intel_primary_plane_setplane,
+	.disable_plane = intel_primary_plane_disable,
+	.destroy = intel_primary_plane_destroy,
+};
+
+static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
+						    int pipe)
+{
+	struct intel_plane *primary;
+	const uint32_t *intel_primary_formats;
+	int num_formats;
+
+	primary = kzalloc(sizeof(*primary), GFP_KERNEL);
+	if (primary == NULL)
+		return NULL;
+
+	primary->can_scale = false;
+	primary->pipe = pipe;
+	primary->plane = pipe;
+	if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4)
+		primary->plane = !pipe;
+
+	if (INTEL_INFO(dev)->gen <= 3) {
+		intel_primary_formats = intel_primary_formats_gen3;
+		num_formats = ARRAY_SIZE(intel_primary_formats_gen3);
+	} else {
+		intel_primary_formats = intel_primary_formats_gen4;
+		num_formats = ARRAY_SIZE(intel_primary_formats_gen4);
+	}
+
+	drm_plane_init(dev, &primary->base, 0,
+		       &intel_primary_plane_funcs, intel_primary_formats,
+		       num_formats, DRM_PLANE_TYPE_PRIMARY);
+	return &primary->base;
+}
+
 static void intel_crtc_init(struct drm_device *dev, int pipe)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc;
-	int i;
+	struct drm_plane *primary;
+	int i, ret;
 
 	intel_crtc = kzalloc(sizeof(*intel_crtc), GFP_KERNEL);
 	if (intel_crtc == NULL)
 		return;
 
-	drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
+	primary = intel_primary_plane_create(dev, pipe);
+	ret = drm_crtc_init_with_planes(dev, &intel_crtc->base, primary,
+					NULL, &intel_crtc_funcs);
+	if (ret) {
+		drm_plane_cleanup(primary);
+		kfree(intel_crtc);
+		return;
+	}
 
 	drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
 	for (i = 0; i < 256; i++) {
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw
In reply to Matt Roper
Quoted 9 lines · Matt Roper

The DRM core setplane code should check that the plane is usable on the specified CRTC before calling into the driver.

Prior to this patch, a plane's possible_crtcs field was purely informational for userspace and was never actually verified at the kernel level (aside from the primary plane helper).

Do you have a nasty igt somewhere which tries to use a plane on the wrong crtc? Especially useful since our i915 code and hw relies on this. -Daniel

Quoted 47 lines
---
 drivers/gpu/drm/drm_crtc.c         | 7 +++++++
 drivers/gpu/drm/drm_plane_helper.c | 6 ------
 2 files changed, 7 insertions(+), 6 deletions(-)
drivers/gpu/drm/drm_crtc.c +7 -0
index 461d19b..b6d6c04 100644
@@ -2140,6 +2140,13 @@ int drm_mode_setplane(struct drm_device *dev, void *data,
 	}
 	crtc = obj_to_crtc(obj);
 
+	/* Check whether this plane is usable on this CRTC */
+	if (!(plane->possible_crtcs & drm_crtc_mask(crtc))) {
+		DRM_DEBUG_KMS("Invalid crtc for plane\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
 	fb = drm_framebuffer_lookup(dev, plane_req->fb_id);
 	if (!fb) {
 		DRM_DEBUG_KMS("Unknown framebuffer ID %d\n",
drivers/gpu/drm/drm_plane_helper.c +0 -6
index b72736d..65c4a00 100644
@@ -137,12 +137,6 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
 		return -EINVAL;
 	}
 
-	/* Primary planes are locked to their owning CRTC */
-	if (plane->possible_crtcs != drm_crtc_mask(crtc)) {
-		DRM_DEBUG_KMS("Cannot change primary plane CRTC\n");
-		return -EINVAL;
-	}
-
 	/* Disallow scaling */
 	src_w >>= 16;
 	src_h >>= 16;
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
author
#5 lore raw
Quoted 8 lines · Daniel Vetter
Quoted 7 lines · Matt Roper

The DRM core setplane code should check that the plane is usable on the specified CRTC before calling into the driver.

Prior to this patch, a plane's possible_crtcs field was purely informational for userspace and was never actually verified at the kernel level (aside from the primary plane helper).

Quoted 6 lines
Quoted 2 lines

Do you have a nasty igt somewhere which tries to use a plane on the wrong crtc? Especially useful since our i915 code and hw relies on this. -Daniel

Not yet; I'll add/modify a test to include that. I'm still working on some other i-g-t test updates for the primary plane stuff based on your previous feedback.

Speaking of i-g-t testing, what is the expected behavior if someone issues a pageflip ioctl while the primary plane is disabled? I'd expect it to return an error, but the -EBUSY currently returned by the DRM core seems a bit confusing/misleading in my opinion. The comments indicate that the existing assumption is that crtc->primary->fb == NULL indicates a hotplug event that userspace hasn't noticed yet, although now we clearly have other ways to hit that error, so I'm not sure EBUSY is really the right response.

Matt

Quoted 53 lines
Quoted 48 lines
---
 drivers/gpu/drm/drm_crtc.c         | 7 +++++++
 drivers/gpu/drm/drm_plane_helper.c | 6 ------
 2 files changed, 7 insertions(+), 6 deletions(-)
drivers/gpu/drm/drm_crtc.c +7 -0
index 461d19b..b6d6c04 100644
@@ -2140,6 +2140,13 @@ int drm_mode_setplane(struct drm_device *dev, void *data,
 	}
 	crtc = obj_to_crtc(obj);
 
+	/* Check whether this plane is usable on this CRTC */
+	if (!(plane->possible_crtcs & drm_crtc_mask(crtc))) {
+		DRM_DEBUG_KMS("Invalid crtc for plane\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
 	fb = drm_framebuffer_lookup(dev, plane_req->fb_id);
 	if (!fb) {
 		DRM_DEBUG_KMS("Unknown framebuffer ID %d\n",
drivers/gpu/drm/drm_plane_helper.c +0 -6
index b72736d..65c4a00 100644
@@ -137,12 +137,6 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
 		return -EINVAL;
 	}
 
-	/* Primary planes are locked to their owning CRTC */
-	if (plane->possible_crtcs != drm_crtc_mask(crtc)) {
-		DRM_DEBUG_KMS("Cannot change primary plane CRTC\n");
-		return -EINVAL;
-	}
-
 	/* Disallow scaling */
 	src_w >>= 16;
 	src_h >>= 16;
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
Signature · 5 lines
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
#6 lore raw
Quoted 20 lines · Matt Roper
Quoted 8 lines · Daniel Vetter
Quoted 7 lines · Matt Roper

The DRM core setplane code should check that the plane is usable on the specified CRTC before calling into the driver.

Prior to this patch, a plane's possible_crtcs field was purely informational for userspace and was never actually verified at the kernel level (aside from the primary plane helper).

Quoted 6 lines
Quoted 2 lines

Do you have a nasty igt somewhere which tries to use a plane on the wrong crtc? Especially useful since our i915 code and hw relies on this. -Daniel

Not yet; I'll add/modify a test to include that. I'm still working on some other i-g-t test updates for the primary plane stuff based on your previous feedback.

Quoted 8 lines

Speaking of i-g-t testing, what is the expected behavior if someone issues a pageflip ioctl while the primary plane is disabled? I'd expect it to return an error, but the -EBUSY currently returned by the DRM core seems a bit confusing/misleading in my opinion. The comments indicate that the existing assumption is that crtc->primary->fb == NULL indicates a hotplug event that userspace hasn't noticed yet, although now we clearly have other ways to hit that error, so I'm not sure EBUSY is really the right response.

That comment is outdated since nowadays the kernel doesn't randomly kill a crtc if its outputs gets unplugged. I think a simple -EINVAL should be good. We'd need to update kms_flip with that new value though.

A quick grep through the intel ddx shows that we don't really depend on this either way. -EBUSY for a disabled primary plane (whether the crtc is on or not doesn't matter imo) really makes no sense.
-Daniel

Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch