Skip to contentSkip to conversation

arcmsr: fix abort command function

PATCH In review ching 2 participants 2 messages Apr 30, 2014 – May 2, 2014 SCSI

lore
Share & tools
lore

ching

author
#0 lore raw

PATCH 5/16 arcmsr: fix abort command function

From: Ching<[email protected]>

Fix abort command and its relate function.

---

drivers/scsi/arcmsr/arcmsr_hba.c +10 -4
diff -uprN a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -2523,7 +2523,7 @@ static int arcmsr_polling_hba_ccbdone(st
 		}
 		arcmsr_cdb = (struct ARCMSR_CDB *)(acb->vir2phy_offset + (flag_ccb << 5));
 		ccb = container_of(arcmsr_cdb, struct CommandControlBlock, arcmsr_cdb);
-		poll_ccb_done = (ccb == poll_ccb) ? 1:0;
+		poll_ccb_done |= (ccb == poll_ccb) ? 1 : 0;
 		if ((ccb->acb != acb) || (ccb->startdone != ARCMSR_CCB_START)) {
 			if ((ccb->startdone == ARCMSR_CCB_ABORTED) || (ccb == poll_ccb)) {
 				printk(KERN_NOTICE "arcmsr%d: scsi id = %d lun = %d ccb = '0x%p'"
@@ -2587,7 +2587,7 @@ static int arcmsr_polling_hbb_ccbdone(st
 		/* check if command done with no error*/
 		arcmsr_cdb = (struct ARCMSR_CDB *)(acb->vir2phy_offset + (flag_ccb << 5));
 		ccb = container_of(arcmsr_cdb, struct CommandControlBlock, arcmsr_cdb);
-		poll_ccb_done = (ccb == poll_ccb) ? 1:0;
+		poll_ccb_done |= (ccb == poll_ccb) ? 1 : 0;
 		if ((ccb->acb != acb) || (ccb->startdone != ARCMSR_CCB_START)) {
 			if ((ccb->startdone == ARCMSR_CCB_ABORTED) || (ccb == poll_ccb)) {
 				printk(KERN_NOTICE "arcmsr%d: scsi id = %d lun = %d ccb = '0x%p'"
@@ -2643,7 +2643,7 @@ polling_hbc_ccb_retry:
 		ccb_cdb_phy = (flag_ccb & 0xFFFFFFF0);
 		arcmsr_cdb = (struct ARCMSR_CDB *)(acb->vir2phy_offset + ccb_cdb_phy);/*frame must be 32 bytes aligned*/
 		pCCB = container_of(arcmsr_cdb, struct CommandControlBlock, arcmsr_cdb);
-		poll_ccb_done = (pCCB == poll_ccb) ? 1 : 0;
+		poll_ccb_done |= (pCCB == poll_ccb) ? 1 : 0;
 		/* check ifcommand done with no error*/
 		if ((pCCB->acb != acb) || (pCCB->startdone != ARCMSR_CCB_START)) {
 			if (pCCB->startdone == ARCMSR_CCB_ABORTED) {
@@ -3245,6 +3245,8 @@ static int arcmsr_abort(struct scsi_cmnd
 		(struct AdapterControlBlock *)cmd->device->host->hostdata;
 	int i = 0;
 	int rtn = FAILED;
+	uint32_t intmask_org;
+
 	printk(KERN_NOTICE
 		"arcmsr%d: abort device command of scsi id = %d lun = %d \n",
 		acb->host->host_no, cmd->device->id, cmd->device->lun);
@@ -3256,9 +3258,12 @@ static int arcmsr_abort(struct scsi_cmnd
 	** we need to handle it as soon as possible and exit
 	************************************************
 	*/
-	if (!atomic_read(&acb->ccboutstandingcount))
+	if (!atomic_read(&acb->ccboutstandingcount)) {
+		acb->acb_flags &= ~ACB_F_ABORT;
 		return rtn;
+	}
 
+	intmask_org = arcmsr_disable_outbound_ints(acb);
 	for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) {
 		struct CommandControlBlock *ccb = acb->pccb_pool[i];
 		if (ccb->startdone == ARCMSR_CCB_START && ccb->pcmd == cmd) {
@@ -3268,6 +3273,7 @@ static int arcmsr_abort(struct scsi_cmnd
 		}
 	}
 	acb->acb_flags &= ~ACB_F_ABORT;
+	arcmsr_enable_outbound_ints(acb, intmask_org);
 	return rtn;
 }
 
#1 lore raw
Quoted 3 lines · ching

From: Ching<[email protected]>

Fix abort command and its relate function.

The changelog should really say something about what the user visible effects are for this bug.

regards,
dan carpenter