STATUS_USER_SESSION_DELETED: auth problems when downgrading from vers=3.0 to vers=2.0/2.1
Subsystems (2)
I just finished installing a copy of Windows 2012 and was testing version 3 when I came across this particular problem.
To reproduce
1) First mount a share using vers=3.0
# mount -t cifs -o username=user1,password=pass1,vers=3.0 //vm140-54/exports /mnt This is successful. 2) Now unmount this share and attempt to mount with vers=2.0 to 2.1 # mount -t cifs -o username=user1,password=pass1,vers=2.1 //vm140-54/exports /mnt mount error(5): Input/output error Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
/var/log/messages shows
kernel: [ 2730.843939] Status code returned 0xc0000203 STATUS_USER_SESSION_DELETED
kernel: [ 2730.846883] CIFS VFS: Send error in SessSetup = -5
kernel: [ 2730.849247] CIFS VFS: cifs_mount failed w/return code = -5
I can then mount using vers=3.0 and vers=1.0 but not 2.0 or 2.1.
I am attempting to debug this but was wondering if anyone had encountered this before.
Sachin Prabhu
PATCH 1/1 cifs: Set client guid on per connection basis
When mounting from a Windows 2012R2 server, we hit the following problem:
1) Mount with any of the following versions - 2.0, 2.1 or 3.0
2) unmount
3) Attempt a mount again using a different SMB version >= 2.0.
You end up with the following failure:
Status code returned 0xc0000203 STATUS_USER_SESSION_DELETED CIFS VFS: Send error in SessSetup = -5
CIFS VFS: cifs_mount failed w/return code = -5
I cannot reproduce this issue using a Windows 2008 R2 server.
This appears to be caused because we use the same client guid for the connection on first mount which we then disconnect and attempt to mount again using a different protocol version. By generating a new guid each time a new connection is Negotiated, we avoid hitting this problem.
--- fs/cifs/cifsfs.c | 8 -------- fs/cifs/cifsglob.h | 1 + fs/cifs/connect.c | 3 +++ fs/cifs/smb2pdu.c | 5 +++-- fs/cifs/smb2pdu.h | 2 -- 5 files changed, 7 insertions(+), 12 deletions(-)
fs/cifs/cifsfs.c +0 -8
@@ -87,10 +87,6 @@ extern mempool_t *cifs_mid_poolp;struct workqueue_struct *cifsiod_wq; -#ifdef CONFIG_CIFS_SMB2 -__u8 cifs_client_guid[SMB2_CLIENT_GUID_SIZE ]; -#endif -/* * Bumps refcount for cifs super block. * Note that it should be only called if a referece to VFS super block is
@@ -1192,10 +1188,6 @@ init_cifs(void)spin_lock_init (&cifs_file_list_lock);spin_lock_init (&GlobalMid_Lock); -#ifdef CONFIG_CIFS_SMB2 -get_random_bytes (cifs_client_guid,SMB2_CLIENT_GUID_SIZE ); -#endif -if (cifs_max_pending <2 ) { cifs_max_pending =2 ;cifs_dbg (FYI ,"cifs_max_pending set to min of 2\n" );
fs/cifs/cifsglob.h +1 -0
@@ -559,6 +559,7 @@ struct TCP_Server_Info {int echo_credits;/* echo reserved slots */ int oplock_credits;/* oplock break reserved slots */ bool echoes:1; /* enable echoes */ +__u8 client_guid[SMB2_CLIENT_GUID_SIZE ];/* Client GUID */ #endif u16 dialect;/* dialect index that server chose */ bool oplocks:1; /* enable oplocks */
fs/cifs/connect.c +3 -0
@@ -2144,6 +2144,9 @@ cifs_get_tcp_session(struct smb_vol *volume_info) sizeof(tcp_ses->srcaddr));memcpy (&tcp_ses->dstaddr, &volume_info->dstaddr,sizeof (tcp_ses->dstaddr)); +#ifdef CONFIG_CIFS_SMB2 +get_random_bytes (tcp_ses->client_guid,SMB2_CLIENT_GUID_SIZE ); +#endif /* * at this point we are the only ones with the pointer * to the struct since the kernel thread not created yet
fs/cifs/smb2pdu.c +3 -2
@@ -375,7 +375,7 @@ SMB2_negotiate(const unsigned int xid, struct cifs_ses *ses) req->Capabilities =cpu_to_le32 (ses->server->vals->req_capabilities); -memcpy (req->ClientGUID, cifs_client_guid,SMB2_CLIENT_GUID_SIZE ); +memcpy (req->ClientGUID, server->client_guid,SMB2_CLIENT_GUID_SIZE ); iov[0 ].iov_base = (char *)req;/* 4 for rfc1002 length field */
@@ -478,7 +478,8 @@ int smb3_validate_negotiate(const unsigned int xid, struct cifs_tcon *tcon) vneg_inbuf.Capabilities =cpu_to_le32 (tcon->ses->server->vals->req_capabilities); -memcpy (vneg_inbuf.Guid, cifs_client_guid,SMB2_CLIENT_GUID_SIZE ); +memcpy (vneg_inbuf.Guid, tcon->ses->server->client_guid, +SMB2_CLIENT_GUID_SIZE );if (tcon->ses->sign) vneg_inbuf.SecurityMode =
fs/cifs/smb2pdu.h +0 -2
@@ -183,8 +183,6 @@ struct smb2_symlink_err_rsp {#define SMB2_CLIENT_GUID_SIZE 16 -extern __u8 cifs_client_guid[SMB2_CLIENT_GUID_SIZE ]; -struct smb2_negotiate_req {struct smb2_hdr hdr;__le16 StructureSize;/* Must be 36 */
Signature · 1 line
1.8.4.2
A message that is not in the archive (sent off-list or not yet received): 1399938492-20577-1-git-send-email-sprabhu-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Steve French
AppliedRe: [PATCH] cifs: Set client guid on per connection basis
merged into cifs-2.6.git for-next
but added an additional patch to fix the problem where we are sending a non-zero ClientGUID for SMB2.02 dialect (where it MUST be zero according to MS-SMB2, it is non-zero starting in SMB2.1)
Quoted 122 lines · Sachin Prabhu
When mounting from a Windows 2012R2 server, we hit the following problem:
1) Mount with any of the following versions - 2.0, 2.1 or 3.0
2) unmount
3) Attempt a mount again using a different SMB version >= 2.0.You end up with the following failure:
Status code returned0xc0000203STATUS_USER_SESSION_DELETEDCIFS VFS: Send error in SessSetup = -5
CIFS VFS:cifs_mountfailed w/return code = -5I cannot reproduce this issue using a Windows 2008 R2 server.
This appears to be caused because we use the same client guid for the connection on first mount which we then disconnect and attempt to mount again using a different protocol version. By generating a new guid each time a new connection is Negotiated, we avoid hitting this problem.
Signed-off-by Sachin Prabhu <[email protected]>--- fs/cifs/cifsfs.c | 8 -------- fs/cifs/cifsglob.h | 1 + fs/cifs/connect.c | 3 +++ fs/cifs/smb2pdu.c | 5 +++-- fs/cifs/smb2pdu.h | 2 -- 5 files changed, 7 insertions(+), 12 deletions(-)fs/cifs/cifsfs.c +0
-8@@ -87,10 +87,6 @@ extern mempool_t *cifs_mid_poolp;struct workqueue_struct *cifsiod_wq; -#ifdef CONFIG_CIFS_SMB2 -__u8 cifs_client_guid[SMB2_CLIENT_GUID_SIZE ]; -#endif -/* * Bumps refcount for cifs super block. * Note that it should be only called if a referece to VFS super block is @@ -1192,10 +1188,6 @@ init_cifs(void)spin_lock_init (&cifs_file_list_lock);spin_lock_init (&GlobalMid_Lock); -#ifdef CONFIG_CIFS_SMB2 -get_random_bytes (cifs_client_guid,SMB2_CLIENT_GUID_SIZE ); -#endif -if (cifs_max_pending <2 ) { cifs_max_pending =2 ;cifs_dbg (FYI ,"cifs_max_pending set to min of 2\n" );fs/cifs/cifsglob.h +1
-0@@ -559,6 +559,7 @@ struct TCP_Server_Info {int echo_credits;/* echo reserved slots */ int oplock_credits;/* oplock break reserved slots */ bool echoes:1; /* enable echoes */ +__u8 client_guid[SMB2_CLIENT_GUID_SIZE ];/* Client GUID */ #endif u16 dialect;/* dialect index that server chose */ bool oplocks:1; /* enable oplocks */fs/cifs/connect.c +3
-0@@ -2144,6 +2144,9 @@ cifs_get_tcp_session(struct smb_vol *volume_info) sizeof(tcp_ses->srcaddr));memcpy (&tcp_ses->dstaddr, &volume_info->dstaddr,sizeof (tcp_ses->dstaddr)); +#ifdef CONFIG_CIFS_SMB2 +get_random_bytes (tcp_ses->client_guid,SMB2_CLIENT_GUID_SIZE ); +#endif /* * at this point we are the only ones with the pointer * to the struct since the kernel thread not created yet fs/cifs/smb2pdu.c +3
-2@@ -375,7 +375,7 @@ SMB2_negotiate(const unsigned int xid, struct cifs_ses *ses) req->Capabilities =cpu_to_le32 (ses->server->vals->req_capabilities); -memcpy (req->ClientGUID, cifs_client_guid,SMB2_CLIENT_GUID_SIZE ); +memcpy (req->ClientGUID, server->client_guid,SMB2_CLIENT_GUID_SIZE ); iov[0 ].iov_base = (char *)req;/* 4 for rfc1002 length field */ @@ -478,7 +478,8 @@ int smb3_validate_negotiate(const unsigned int xid, struct cifs_tcon *tcon) vneg_inbuf.Capabilities =cpu_to_le32 (tcon->ses->server->vals->req_capabilities); -memcpy (vneg_inbuf.Guid, cifs_client_guid,SMB2_CLIENT_GUID_SIZE ); +memcpy (vneg_inbuf.Guid, tcon->ses->server->client_guid, +SMB2_CLIENT_GUID_SIZE );if (tcon->ses->sign) vneg_inbuf.SecurityMode =fs/cifs/smb2pdu.h +0
-3@@ -183,8 +183,6 @@ struct smb2_symlink_err_rsp {#define SMB2_CLIENT_GUID_SIZE 16 -extern __u8 cifs_client_guid[SMB2_CLIENT_GUID_SIZE ]; -struct smb2_negotiate_req {struct smb2_hdr hdr;__le16 StructureSize;/* Must be 36 */ --1.8.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-cifs" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
Thanks, Steve
A message that is not in the archive (sent off-list or not yet received): CAH2r5mvVoa-ns7CnpMuscYyF=EQxzB2E3TDh+xbAZeZFqfBZdw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
RE: [PATCH] cifs: Set client guid on per connection basis
Won't this need to be undone for multichannel support? The client GUID needs to be the same when connecting multiple channels, a different one will break cross-channel replay detection.
It's definitely true that if you intend to negotiate a different dialect, then the client GUID should not be reused.
Quoted 157 lines
-----Original Message-----
From: [email protected] [mailto:linux-cifs- [email protected]] On Behalf Of Steve French
Sent: Tuesday, May 13, 2014 10:49 PM
To: Sachin Prabhu
Cc: linux-cifs
Subject: Re: [PATCH] cifs: Set client guid on per connection basismerged into cifs-2.6.git for-next
but added an additional patch to fix the problem where we are sending a non-zero ClientGUID for SMB2.02 dialect (where it MUST be zero according to MS-SMB2, it is non-zero starting in SMB2.1)
Quoted 8 lines · Sachin Prabhu
When mounting from a Windows 2012R2 server, we hit the following problem:
1) Mount with any of the following versions - 2.0, 2.1 or 3.0
2) unmount
3) Attempt a mount again using a different SMB version >= 2.0.You end up with the following failure:
Status code returned0xc0000203STATUS_USER_SESSION_DELETEDCIFSVFS:
Quoted 9 lines
Send error in SessSetup = -5 CIFS VFS:
cifs_mountfailed w/return code = -5I cannot reproduce this issue using a Windows 2008 R2 server.
This appears to be caused because we use the same client guid for the connection on first mount which we then disconnect and attempt to mount again using a different protocol version. By generating a new guid each time a new connection is Negotiated, we avoid hitting this
problem.
fs/cifs/connect.c cifs_get_tcp_session(struct smb_vol
Quoted 52 lines
Signed-off-by Sachin Prabhu <[email protected]>--- fs/cifs/cifsfs.c | 8 -------- fs/cifs/cifsglob.h | 1 + fs/cifs/connect.c | 3 +++ fs/cifs/smb2pdu.c | 5 +++-- fs/cifs/smb2pdu.h | 2 -- 5 files changed, 7 insertions(+), 12 deletions(-)fs/cifs/cifsfs.c index renamed from fs/cifs/cifsfs.c +0
-05be1f99..c80aa5a 100644
fs/cifs/cifsfs.c +0
-4@@ -87,10 +87,6 @@ extern mempool_t *cifs_mid_poolp;struct workqueue_struct *cifsiod_wq; -#ifdef CONFIG_CIFS_SMB2 -__u8 cifs_client_guid[SMB2_CLIENT_GUID_SIZE ]; -#endif -/* * Bumps refcount for cifs super block. * Note that it should be only called if a referece to VFS super block is @@ -1192,10 +1188,6 @@
init_cifs(void)spin_lock_init(&cifs_file_list_lock); spin_lock_init(&GlobalMid_Lock);fs/cifs/cifsfs.c +0
-4-#ifdef CONFIG_CIFS_SMB2 -get_random_bytes (cifs_client_guid,SMB2_CLIENT_GUID_SIZE ); -#endif -if (cifs_max_pending <2 ) { cifs_max_pending =2 ;cifs_dbg (FYI ,"cifs_max_pending set to min of 2\n" );fs/cifs/cifsglob.h index renamed from fs/cifs/cifsglob.h +0
-030f6e92..f74edd2 100644
fs/cifs/cifsglob.h +1
-0@@ -559,6 +559,7 @@ struct TCP_Server_Info {int echo_credits;/* echo reserved slots */ int oplock_credits;/* oplock break reserved slots */ bool echoes:1; /* enable echoes */ +__u8 client_guid[SMB2_CLIENT_GUID_SIZE ];/* Client GUID */ #endif u16 dialect;/* dialect index that server chose */ bool oplocks:1; /* enable oplocks */ diff --git
a/fs/cifs/connect.cb/fs/cifs/connect.cindex 8813ff7..8b8fe9b 100644fs/cifs/connect.c +0
-0@@ -2144,6 +2144,9 @@ cifs_get_tcp_session(struct smb_vol
*volume_info)Quoted 14 lines
fs/cifs/connect.c +3
-1sizeof(tcp_ses->srcaddr));memcpy (&tcp_ses->dstaddr, &volume_info->dstaddr,sizeof (tcp_ses->dstaddr)); +#ifdef CONFIG_CIFS_SMB2 +get_random_bytes (tcp_ses->client_guid,SMB2_CLIENT_GUID_SIZE ); +#endif /* * at this point we are the only ones with the pointer * to the struct since the kernel thread not created yet diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index 3802f8c..dc44610 100644
fs/cifs/smb2pdu.c SMB2_negotiate(const unsigned int xid, struct · line 380
Quoted 6 lines
fs/cifs/smb2pdu.c +0
-1@@ -375,7 +375,7 @@ SMB2_negotiate(const unsigned int xid, struct cifs_ses *ses) req->Capabilities =cpu_to_le32 (ses->server->vals->req_capabilities); - memcpy(req->ClientGUID, cifs_client_guid,
SMB2_CLIENT_GUID_SIZE);Quoted 11 lines
fs/cifs/smb2pdu.c +2
-0+memcpy (req->ClientGUID, server->client_guid, +SMB2_CLIENT_GUID_SIZE ); iov[0 ].iov_base = (char *)req; /* 4 for rfc1002 length field */ @@ -478,7 +478,8 @@ int
smb3_validate_negotiate(const unsigned int xid, struct cifs_tcon *tcon)vneg_inbuf.Capabilities = cpu_to_le32(tcon->ses->server->vals->req_capabilities);- memcpy(vneg_inbuf.Guid,
cifs_client_guid,
SMB2_CLIENT_GUID_SIZE);Quoted 20 lines
fs/cifs/smb2pdu.c +2
-0+memcpy (vneg_inbuf.Guid, tcon->ses->server->client_guid, +SMB2_CLIENT_GUID_SIZE );if (tcon->ses->sign) vneg_inbuf.SecurityMode = diff --git
a/fs/cifs/smb2pdu.hb/fs/cifs/smb2pdu.hindex 2022c54..743e11e 100644fs/cifs/smb2pdu.h +0
-3@@ -183,8 +183,6 @@ struct smb2_symlink_err_rsp {#define SMB2_CLIENT_GUID_SIZE 16 -extern __u8 cifs_client_guid[SMB2_CLIENT_GUID_SIZE ]; -struct smb2_negotiate_req {struct smb2_hdr hdr;__le16 StructureSize;/* Must be 36 */ --1.8.4.2
Quoted 3 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-cifs" in the body of a message to [email protected] Moremajordomo
Quoted 1 line
--
Thanks,Steve
--
To unsubscribe from this list: send the line "unsubscribe linux-cifs" in the body of a message to [email protected] More majordomo info at
http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 38fc6261ec74445bb234134fc82d9cc9-GeMU99GfrruUGfbpEvpFbeO6mTEJWrR4XA4E9RH9d+qIuWR1G4zioA@public.gmane.org
Re: [PATCH] cifs: Set client guid on per connection basis
Would multichannel require a new negotiate protocol? We are only generating it in get_tcp_session - and would probably not go through that path when connecting another socket to the original parent
struct. Currently the model where tcons hang off smb sessions which
hang off tcp sessions looks strange when you consider multiple tcp connections but have to distinguish the code which connects the first tcp session for a machine and sets up the parent structure that all the others (tcons and smb sessions) hang off, from the code which connects subsequent tcp sessions for multichannel
Quoted 161 lines · Tom Talpey
Won't this need to be undone for multichannel support? The client GUID needs to be the same when connecting multiple channels, a different one will break cross-channel replay detection.
It's definitely true that if you intend to negotiate a different dialect, then the client GUID should not be reused.
Quoted 157 lines
-----Original Message-----
From: [email protected] [mailto:linux-cifs- [email protected]] On Behalf Of Steve French
Sent: Tuesday, May 13, 2014 10:49 PM
To: Sachin Prabhu
Cc: linux-cifs
Subject: Re: [PATCH] cifs: Set client guid on per connection basismerged into cifs-2.6.git for-next
but added an additional patch to fix the problem where we are sending a non-zero ClientGUID for SMB2.02 dialect (where it MUST be zero according to MS-SMB2, it is non-zero starting in SMB2.1)
Quoted 8 lines · Sachin Prabhu
When mounting from a Windows 2012R2 server, we hit the following problem:
1) Mount with any of the following versions - 2.0, 2.1 or 3.0
2) unmount
3) Attempt a mount again using a different SMB version >= 2.0.You end up with the following failure:
Status code returned0xc0000203STATUS_USER_SESSION_DELETEDCIFSVFS:
Quoted 9 lines
Send error in SessSetup = -5 CIFS VFS:
cifs_mountfailed w/return code = -5I cannot reproduce this issue using a Windows 2008 R2 server.
This appears to be caused because we use the same client guid for the connection on first mount which we then disconnect and attempt to mount again using a different protocol version. By generating a new guid each time a new connection is Negotiated, we avoid hitting this
problem.
fs/cifs/connect.c cifs_get_tcp_session(struct smb_vol
Quoted 52 lines
Signed-off-by Sachin Prabhu <[email protected]>--- fs/cifs/cifsfs.c | 8 -------- fs/cifs/cifsglob.h | 1 + fs/cifs/connect.c | 3 +++ fs/cifs/smb2pdu.c | 5 +++-- fs/cifs/smb2pdu.h | 2 -- 5 files changed, 7 insertions(+), 12 deletions(-)fs/cifs/cifsfs.c index renamed from fs/cifs/cifsfs.c +0
-05be1f99..c80aa5a 100644
fs/cifs/cifsfs.c +0
-4@@ -87,10 +87,6 @@ extern mempool_t *cifs_mid_poolp;struct workqueue_struct *cifsiod_wq; -#ifdef CONFIG_CIFS_SMB2 -__u8 cifs_client_guid[SMB2_CLIENT_GUID_SIZE ]; -#endif -/* * Bumps refcount for cifs super block. * Note that it should be only called if a referece to VFS super block is @@ -1192,10 +1188,6 @@
init_cifs(void)spin_lock_init(&cifs_file_list_lock); spin_lock_init(&GlobalMid_Lock);fs/cifs/cifsfs.c +0
-4-#ifdef CONFIG_CIFS_SMB2 -get_random_bytes (cifs_client_guid,SMB2_CLIENT_GUID_SIZE ); -#endif -if (cifs_max_pending <2 ) { cifs_max_pending =2 ;cifs_dbg (FYI ,"cifs_max_pending set to min of 2\n" );fs/cifs/cifsglob.h index renamed from fs/cifs/cifsglob.h +0
-030f6e92..f74edd2 100644
fs/cifs/cifsglob.h +1
-0@@ -559,6 +559,7 @@ struct TCP_Server_Info {int echo_credits;/* echo reserved slots */ int oplock_credits;/* oplock break reserved slots */ bool echoes:1; /* enable echoes */ +__u8 client_guid[SMB2_CLIENT_GUID_SIZE ];/* Client GUID */ #endif u16 dialect;/* dialect index that server chose */ bool oplocks:1; /* enable oplocks */ diff --git
a/fs/cifs/connect.cb/fs/cifs/connect.cindex 8813ff7..8b8fe9b 100644fs/cifs/connect.c +0
-0@@ -2144,6 +2144,9 @@ cifs_get_tcp_session(struct smb_vol
*volume_info)Quoted 14 lines
fs/cifs/connect.c +3
-1sizeof(tcp_ses->srcaddr));memcpy (&tcp_ses->dstaddr, &volume_info->dstaddr,sizeof (tcp_ses->dstaddr)); +#ifdef CONFIG_CIFS_SMB2 +get_random_bytes (tcp_ses->client_guid,SMB2_CLIENT_GUID_SIZE ); +#endif /* * at this point we are the only ones with the pointer * to the struct since the kernel thread not created yet diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index 3802f8c..dc44610 100644
fs/cifs/smb2pdu.c SMB2_negotiate(const unsigned int xid, struct · line 380
Quoted 6 lines
fs/cifs/smb2pdu.c +0
-1@@ -375,7 +375,7 @@ SMB2_negotiate(const unsigned int xid, struct cifs_ses *ses) req->Capabilities =cpu_to_le32 (ses->server->vals->req_capabilities); - memcpy(req->ClientGUID, cifs_client_guid,
SMB2_CLIENT_GUID_SIZE);Quoted 11 lines
fs/cifs/smb2pdu.c +2
-0+memcpy (req->ClientGUID, server->client_guid, +SMB2_CLIENT_GUID_SIZE ); iov[0 ].iov_base = (char *)req; /* 4 for rfc1002 length field */ @@ -478,7 +478,8 @@ int
smb3_validate_negotiate(const unsigned int xid, struct cifs_tcon *tcon)vneg_inbuf.Capabilities = cpu_to_le32(tcon->ses->server->vals->req_capabilities);- memcpy(vneg_inbuf.Guid,
cifs_client_guid,
SMB2_CLIENT_GUID_SIZE);Quoted 20 lines
fs/cifs/smb2pdu.c +2
-0+memcpy (vneg_inbuf.Guid, tcon->ses->server->client_guid, +SMB2_CLIENT_GUID_SIZE );if (tcon->ses->sign) vneg_inbuf.SecurityMode = diff --git
a/fs/cifs/smb2pdu.hb/fs/cifs/smb2pdu.hindex 2022c54..743e11e 100644fs/cifs/smb2pdu.h +0
-3@@ -183,8 +183,6 @@ struct smb2_symlink_err_rsp {#define SMB2_CLIENT_GUID_SIZE 16 -extern __u8 cifs_client_guid[SMB2_CLIENT_GUID_SIZE ]; -struct smb2_negotiate_req {struct smb2_hdr hdr;__le16 StructureSize;/* Must be 36 */ --1.8.4.2
Quoted 3 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-cifs" in the body of a message to [email protected] Moremajordomo
Quoted 1 line
--
Thanks,Steve
--
To unsubscribe from this list: send the line "unsubscribe linux-cifs" in the body of a message to [email protected] More majordomo info at
http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
Thanks, Steve
A message that is not in the archive (sent off-list or not yet received): CAH2r5mvWu18oiVzzwC+jYozLiAtKSJusRsky9P_Ew+c01KcS6g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
RE: [PATCH] cifs: Set client guid on per connection basis
Quoted 1 line
Would multichannel require a new negotiate protocol?
A new connection always requires a negotiate, multichannel is no exception. What's different is that to make a multichannel association, the client should provide the original ClientGUID, and establish the same dialect and capabilities as the original connection. The session bind needs these in order join appropriately on the new multichannel.
The ClientGUID is mostly for supporting leases, and if you swizzle it per-connection then clients will start breaking their own leases when using multichannel. There is also some enforcement at session setup/bind time, as documented in MS-SMB2 3.3.5.3.3:
"The server MUST look up all existing connections from the client in the global ConnectionList where Connection.ClientGuid matches Session.Connection.ClientGuid. For any matching Connection, if Connection.Dialect is not the same as Session.Connection.Dialect, the server SHOULD<228> close the newly created Session, as specified in section 3.3.4.12, by providing Session.SessionGlobalId as the input parameter, and fail the session setup request with STATUS_USER_SESSION_DELETED."
I guess if you only call get_tcp_session once, then you might be ok (that's your call). I was just pointing out that a new ClientGUID per-*connection* will get in the way for you later, because multichannel reuses sessions on many connections. Normally the protocol specifies a single ClientGUID which is used for all connections from a given client.
Quoted 195 lines
-----Original Message-----
From: Steve French [mailto:[email protected]]
Sent: Thursday, May 15, 2014 10:12 AM
To: Tom Talpey
Cc: Sachin Prabhu; linux-cifs
Subject: Re: [PATCH] cifs: Set client guid on per connection basisWould multichannel require a new negotiate protocol? We are only generating it in
get_tcp_session- and would probably not go through that path when connecting another socket to the original parent
struct. Currently the model where tcons hang off smb sessions which
hang off tcp sessions looks strange when you consider multiple tcp connections but have to distinguish the code which connects the first tcp session for a machine and sets up the parent structure that all the others (tcons and smb sessions) hang off, from the code which connects subsequent tcp sessions for multichannelQuoted 1 line · Tom Talpey
Won't this need to be undone for multichannel support? The client GUID
needs to be the same when connecting multiple channels, a different one will break cross-channel replay detection.
Quoted 2 lines
It's definitely true that if you intend to negotiate a different dialect, then
the client GUID should not be reused.
Quoted 154 lines
Quoted 154 lines
-----Original Message-----
From: [email protected] [mailto:linux-cifs- [email protected]] On Behalf Of Steve French
Sent: Tuesday, May 13, 2014 10:49 PM
To: Sachin Prabhu
Cc: linux-cifs
Subject: Re: [PATCH] cifs: Set client guid on per connection basismerged into cifs-2.6.git for-next
but added an additional patch to fix the problem where we are sending a non-zero ClientGUID for SMB2.02 dialect (where it MUST be zero according to MS-SMB2, it is non-zero starting in SMB2.1)
Quoted 8 lines · Sachin Prabhu
When mounting from a Windows 2012R2 server, we hit the following problem:
1) Mount with any of the following versions - 2.0, 2.1 or 3.0
2) unmount
3) Attempt a mount again using a different SMB version >= 2.0.You end up with the following failure:
Status code returned0xc0000203STATUS_USER_SESSION_DELETEDCIFSVFS:
Quoted 10 lines
Send error in SessSetup = -5 CIFS VFS:
cifs_mountfailed w/return code = -5I cannot reproduce this issue using a Windows 2008 R2 server.
This appears to be caused because we use the same client guid for the connection on first mount which we then disconnect and attempt to mount again using a different protocol version. By generating a new guid each time a new connection is Negotiated, we avoid hitting this
problem.
fs/cifs/connect.c cifs_get_tcp_session(struct smb_vol
Quoted 53 lines
Signed-off-by Sachin Prabhu <[email protected]>--- fs/cifs/cifsfs.c | 8 -------- fs/cifs/cifsglob.h | 1 + fs/cifs/connect.c | 3 +++ fs/cifs/smb2pdu.c | 5 +++-- fs/cifs/smb2pdu.h | 2 -- 5 files changed, 7 insertions(+), 12 deletions(-)fs/cifs/cifsfs.c index renamed from fs/cifs/cifsfs.c +0
-05be1f99..c80aa5a 100644
fs/cifs/cifsfs.c +0
-4@@ -87,10 +87,6 @@ extern mempool_t *cifs_mid_poolp;struct workqueue_struct *cifsiod_wq; -#ifdef CONFIG_CIFS_SMB2 -__u8 cifs_client_guid[SMB2_CLIENT_GUID_SIZE ]; -#endif -/* * Bumps refcount for cifs super block. * Note that it should be only called if a referece to VFS super block is @@ -1192,10 +1188,6 @@
init_cifs(void)spin_lock_init(&cifs_file_list_lock); spin_lock_init(&GlobalMid_Lock);fs/cifs/cifsfs.c +0
-4-#ifdef CONFIG_CIFS_SMB2 -get_random_bytes (cifs_client_guid,SMB2_CLIENT_GUID_SIZE ); -#endif -if (cifs_max_pending <2 ) { cifs_max_pending =2 ; cifs_dbg(FYI, "cifs_max_pending set to min of2\n"); diff --git
a/fs/cifs/cifsglob.hb/fs/cifs/cifsglob.hindex 30f6e92..f74edd2 100644fs/cifs/cifsglob.h +1
-0@@ -559,6 +559,7 @@ struct TCP_Server_Info {int echo_credits;/* echo reserved slots */ int oplock_credits;/* oplock break reserved slots */ bool echoes:1; /* enable echoes */ +__u8 client_guid[SMB2_CLIENT_GUID_SIZE ];/* Client GUID */ #endif u16 dialect;/* dialect index that server chose */ bool oplocks:1; /* enable oplocks */ diff --git
a/fs/cifs/connect.cb/fs/cifs/connect.cindex 8813ff7..8b8fe9b 100644fs/cifs/connect.c +0
-0@@ -2144,6 +2144,9 @@ cifs_get_tcp_session(struct smb_vol
*volume_info)Quoted 15 lines
fs/cifs/connect.c +3
-0sizeof(tcp_ses->srcaddr));memcpy (&tcp_ses->dstaddr, &volume_info->dstaddr,sizeof (tcp_ses->dstaddr)); +#ifdef CONFIG_CIFS_SMB2 +get_random_bytes (tcp_ses->client_guid, +SMB2_CLIENT_GUID_SIZE );#endif /* * at this point we are the only ones with the pointer * to the struct since the kernel thread not created yet fs/cifs/smb2pdu.c index renamed from fs/cifs/smb2pdu.c +0
-03802f8c..dc44610
100644fs/cifs/smb2pdu.c SMB2_negotiate(const unsigned int xid, struct · line 380
Quoted 6 lines
fs/cifs/smb2pdu.c +0
-1@@ -375,7 +375,7 @@ SMB2_negotiate(const unsigned int xid, struct cifs_ses *ses) req->Capabilities =cpu_to_le32 (ses->server->vals->req_capabilities); - memcpy(req->ClientGUID, cifs_client_guid,
SMB2_CLIENT_GUID_SIZE);Quoted 11 lines
fs/cifs/smb2pdu.c +2
-0+memcpy (req->ClientGUID, server->client_guid, +SMB2_CLIENT_GUID_SIZE ); iov[0 ].iov_base = (char *)req; /* 4 for rfc1002 length field */ @@ -478,7 +478,8 @@ int
smb3_validate_negotiate(const unsigned int xid, struct cifs_tcon *tcon)vneg_inbuf.Capabilities = cpu_to_le32(tcon->ses->server->vals->req_capabilities);- memcpy(vneg_inbuf.Guid,
cifs_client_guid,
SMB2_CLIENT_GUID_SIZE);Quoted 21 lines
fs/cifs/smb2pdu.c +2
-0+memcpy (vneg_inbuf.Guid, tcon->ses->server->client_guid, +SMB2_CLIENT_GUID_SIZE );if (tcon->ses->sign) vneg_inbuf.SecurityMode = diff --git
a/fs/cifs/smb2pdu.hb/fs/cifs/smb2pdu.hindex 2022c54..743e11e 100644fs/cifs/smb2pdu.h +0
-3@@ -183,8 +183,6 @@ struct smb2_symlink_err_rsp {#define SMB2_CLIENT_GUID_SIZE 16 -extern __u8 cifs_client_guid[SMB2_CLIENT_GUID_SIZE ]; -struct smb2_negotiate_req {struct smb2_hdr hdr;__le16 StructureSize;/* Must be 36 */ --1.8.4.2
Quoted 3 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-cifs" in the body of a message to [email protected] Moremajordomo
Quoted 1 line
Quoted 7 lines
Quoted 7 lines
--
Thanks,Steve
--
To unsubscribe from this list: send the line "unsubscribe linux-cifs" in the body of a message to [email protected] Moremajordomo
Quoted 1 line
Quoted 1 line
--
Thanks,Steve
A message that is not in the archive (sent off-list or not yet received): ae4e482c25c44648a631e8f78ae5bc5a-GeMU99GfrruUGfbpEvpFbeO6mTEJWrR4XA4E9RH9d+qIuWR1G4zioA@public.gmane.org
RE: [PATCH] cifs: Set client guid on per connection basis
Thinking about this a bit more, it seems to me that if you do want to support an explicit dialect selection at mount time, then you may want to check whether you have an existing mount over a different dialect from the client before allowing it. The alternative may be to select a new ClientGUID for the new mount, to avoid the session create failure - but that will mean leasing won't work very well. Might be a tough choice, if you do want this dialect option.
Quoted 239 lines
-----Original Message-----
From: [email protected] [mailto:linux-cifs- [email protected]] On Behalf Of Tom Talpey
Sent: Thursday, May 15, 2014 10:35 AM
To: Steve French
Cc: Sachin Prabhu; linux-cifs
Subject: RE: [PATCH] cifs: Set client guid on per connection basisQuoted 1 line
Would multichannel require a new negotiate protocol?
A new connection always requires a negotiate, multichannel is no exception. What's different is that to make a multichannel association, the client should provide the original ClientGUID, and establish the same dialect and capabilities as the original connection. The session bind needs these in order join appropriately on the new multichannel.
The ClientGUID is mostly for supporting leases, and if you swizzle it per- connection then clients will start breaking their own leases when using multichannel. There is also some enforcement at session setup/bind time, as documented in MS-SMB2 3.3.5.3.3:
"The server MUST look up all existing connections from the client in the global ConnectionList where Connection.ClientGuid matches Session.Connection.ClientGuid. For any matching Connection, if Connection.Dialect is not the same as Session.Connection.Dialect, the server SHOULD<228> close the newly created Session, as specified in section 3.3.4.12, by providing Session.SessionGlobalId as the input parameter, and fail the session setup request with
STATUS_USER_SESSION_DELETED."I guess if you only call
get_tcp_sessiononce, then you might be ok (that's your call). I was just pointing out that a new ClientGUID per-*connection* will get in the way for you later, because multichannel reuses sessions on many connections. Normally the protocol specifies a single ClientGUID which is used for all connections from a given client.Quoted 19 lines
-----Original Message-----
From: Steve French [mailto:[email protected]]
Sent: Thursday, May 15, 2014 10:12 AM
To: Tom Talpey
Cc: Sachin Prabhu; linux-cifs
Subject: Re: [PATCH] cifs: Set client guid on per connection basisWould multichannel require a new negotiate protocol? We are only generating it in
get_tcp_session- and would probably not go through that path when connecting another socket to the original parent
struct. Currently the model where tcons hang off smb sessions which
hang off tcp sessions looks strange when you consider multiple tcp connections but have to distinguish the code which connects the first tcp session for a machine and sets up the parent structure that all the others (tcons and smb sessions) hang off, from the code which connects subsequent tcp sessions for multichannelOn Thu, May 15, 2014 at 8:36 AM, Tom Talpey <[email protected]> wrote:
Quoted 24 lines
Quoted 2 lines
Won't this need to be undone for multichannel support? The client GUID
needs to be the same when connecting multiple channels, a different one will break cross-channel replay detection.
Quoted 3 lines
It's definitely true that if you intend to negotiate a different dialect, then
the client GUID should not be reused.
Quoted 16 lines
Quoted 16 lines
-----Original Message-----
From: [email protected] [mailto:linux-cifs- [email protected]] On Behalf Of Steve French
Sent: Tuesday, May 13, 2014 10:49 PM
To: Sachin Prabhu
Cc: linux-cifs
Subject: Re: [PATCH] cifs: Set client guid on per connection basismerged into cifs-2.6.git for-next
but added an additional patch to fix the problem where we are sending a non-zero ClientGUID for SMB2.02 dialect (where it MUST be zero according to MS-SMB2, it is non-zero starting in SMB2.1)
On Tue, May 13, 2014 at 1:48 AM, Sachin Prabhu
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 8 lines · wrote:
When mounting from a Windows 2012R2 server, we hit the following problem:
1) Mount with any of the following versions - 2.0, 2.1 or 3.0
2) unmount
3) Attempt a mount again using a different SMB version >= 2.0.You end up with the following failure:
Status code returned0xc0000203STATUS_USER_SESSION_DELETEDCIFS
Quoted 138 lines
Quoted 130 lines
Quoted 130 lines
VFS:
Quoted 10 lines
Send error in SessSetup = -5 CIFS VFS:
cifs_mountfailed w/return code = -5I cannot reproduce this issue using a Windows 2008 R2 server.
This appears to be caused because we use the same client guid for the connection on first mount which we then disconnect and attempt to mount again using a different protocol version. By generating a new guid each time a new connection is Negotiated, we avoid hitting this
problem.
fs/cifs/connect.c cifs_get_tcp_session(struct smb_vol
Quoted 54 lines
Signed-off-by Sachin Prabhu <[email protected]>--- fs/cifs/cifsfs.c | 8 -------- fs/cifs/cifsglob.h | 1 + fs/cifs/connect.c | 3 +++ fs/cifs/smb2pdu.c | 5 +++-- fs/cifs/smb2pdu.h | 2 -- 5 files changed, 7 insertions(+), 12 deletions(-)fs/cifs/cifsfs.c index renamed from fs/cifs/cifsfs.c +0
-05be1f99..c80aa5a 100644
fs/cifs/cifsfs.c +0
-4@@ -87,10 +87,6 @@ extern mempool_t *cifs_mid_poolp;struct workqueue_struct *cifsiod_wq; -#ifdef CONFIG_CIFS_SMB2 -__u8 cifs_client_guid[SMB2_CLIENT_GUID_SIZE ]; -#endif -/* * Bumps refcount for cifs super block. * Note that it should be only called if a referece to VFS super block is @@ -1192,10 +1188,6 @@
init_cifs(void)spin_lock_init(&cifs_file_list_lock); spin_lock_init(&GlobalMid_Lock);fs/cifs/cifsfs.c +0
-4-#ifdef CONFIG_CIFS_SMB2 -get_random_bytes (cifs_client_guid,SMB2_CLIENT_GUID_SIZE ); -#endif -if (cifs_max_pending <2 ) { cifs_max_pending =2 ; cifs_dbg(FYI, "cifs_max_pending set to min of2\n"); diff --git
a/fs/cifs/cifsglob.hb/fs/cifs/cifsglob.hindex 30f6e92..f74edd2 100644fs/cifs/cifsglob.h +2
-0@@ -559,6 +559,7 @@ struct TCP_Server_Info {int echo_credits;/* echo reserved slots */ int oplock_credits;/* oplock break reserved slots */ bool echoes:1; /* enable echoes */ +__u8 client_guid[SMB2_CLIENT_GUID_SIZE ];/* Client GUID +*/ #endif u16 dialect;/* dialect index that server chose */ bool oplocks:1; /* enable oplocks */ diff --git
a/fs/cifs/connect.cb/fs/cifs/connect.cindex 8813ff7..8b8fe9b 100644fs/cifs/connect.c +0
-0@@ -2144,6 +2144,9 @@ cifs_get_tcp_session(struct smb_vol
*volume_info)Quoted 15 lines
fs/cifs/connect.c +3
-0sizeof(tcp_ses->srcaddr));memcpy (&tcp_ses->dstaddr, &volume_info->dstaddr,sizeof (tcp_ses->dstaddr)); +#ifdef CONFIG_CIFS_SMB2 +get_random_bytes (tcp_ses->client_guid, +SMB2_CLIENT_GUID_SIZE );#endif /* * at this point we are the only ones with the pointer * to the struct since the kernel thread not created yet fs/cifs/smb2pdu.c index renamed from fs/cifs/smb2pdu.c +0
-03802f8c..dc44610
100644fs/cifs/smb2pdu.c SMB2_negotiate(const unsigned int xid, struct · line 380
Quoted 6 lines
fs/cifs/smb2pdu.c +0
-1@@ -375,7 +375,7 @@ SMB2_negotiate(const unsigned int xid, struct cifs_ses *ses) req->Capabilities =cpu_to_le32 (ses->server->vals->req_capabilities); - memcpy(req->ClientGUID, cifs_client_guid,
SMB2_CLIENT_GUID_SIZE);Quoted 11 lines
fs/cifs/smb2pdu.c +2
-0+memcpy (req->ClientGUID, server->client_guid, +SMB2_CLIENT_GUID_SIZE ); iov[0 ].iov_base = (char *)req; /* 4 for rfc1002 length field */ @@ -478,7 +478,8 @@ int
smb3_validate_negotiate(const unsigned int xid, struct cifs_tcon *tcon)vneg_inbuf.Capabilities = cpu_to_le32(tcon->ses->server->vals->req_capabilities);- memcpy(vneg_inbuf.Guid,
cifs_client_guid,
SMB2_CLIENT_GUID_SIZE);Quoted 21 lines
fs/cifs/smb2pdu.c +2
-0+memcpy (vneg_inbuf.Guid, tcon->ses->server->client_guid, +SMB2_CLIENT_GUID_SIZE );if (tcon->ses->sign) vneg_inbuf.SecurityMode = diff --git
a/fs/cifs/smb2pdu.hb/fs/cifs/smb2pdu.hindex 2022c54..743e11e 100644fs/cifs/smb2pdu.h +0
-3@@ -183,8 +183,6 @@ struct smb2_symlink_err_rsp {#define SMB2_CLIENT_GUID_SIZE 16 -extern __u8 cifs_client_guid[SMB2_CLIENT_GUID_SIZE ]; -struct smb2_negotiate_req {struct smb2_hdr hdr;__le16 StructureSize;/* Must be 36 */ --1.8.4.2
Quoted 3 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-cifs" in the body of a message to [email protected] Moremajordomo
Quoted 1 line
Quoted 7 lines
Quoted 7 lines
--
Thanks,Steve
--
To unsubscribe from this list: send the line "unsubscribe linux-cifs" in the body of a message to [email protected] Moremajordomo
Quoted 8 lines
Quoted 1 line
Quoted 1 line
--
Thanks,Steve
N r y b X ǧv ^ ){.n + { r' {ay ʇڙ ,j f h z w j:+v w j m zZ+ ݢj"
! i