ARM: sa1100: remove unused header
Subsystems (2)
PATCH 1/1 ARM: sa1100: remove unused header
SA-1101.h was included in the tree shortly before v2.4.0. The #include preprocessor directive that includes it has always depended on a preprocessor check for CONFIG_SA1101. But the related (Kconfig) symbol has never been part of the tree. Remove that preprocessor check and this unused header.
Signed-off-by Paul Bolle <[email protected]>
---
Tested only with git grep (on roughly 14 years of Linux history).
arch/arm/mach-sa1100/include/mach/SA-1101.h | 925 --------------------------- arch/arm/mach-sa1100/include/mach/hardware.h | 4 - 2 files changed, 929 deletions(-) delete mode 100644 arch/arm/mach-sa1100/include/mach/SA-1101.h
arch/arm/mach-sa1100/include/mach/SA-1101.h deleted +0 -925
@@ -1,925 +0,0 @@ -/* -* SA-1101.h -* -* Copyright (c) Peter Danielsson 1999 -* -* Definition of constants related to the sa1101 -* support chip for the sa1100 -* -*/ - - -/* Be sure that virtual mapping is defined right */ -#ifndef __ASM_ARCH_HARDWARE_H -#error You must include hardware.h not SA-1101.h -#endif - -#ifndef SA1101_BASE -#error You must define SA-1101 physical base address -#endif - -#ifndef LANGUAGE -# ifdef __ASSEMBLY__ -# define LANGUAGE Assembly -# else -# define LANGUAGE C -# endif -#endif - -/* -* We have mapped the sa1101 depending on the value of SA1101_BASE. -* It then appears from 0xf4000000. -*/ - -#define SA1101_p2v ( x ) ((x) - SA1101_BASE + 0xf4000000) -#define SA1101_v2p ( x ) ((x) - 0xf4000000 + SA1101_BASE) - -#ifndef SA1101_p2v -#define SA1101_p2v (PhAdd) (PhAdd) -#endif - -#include <mach/bitfield.h> - -#define C 0 -#define Assembly 1 - - -/* -* Memory map -*/ - -#define __SHMEM_CONTROL0 0x00000000 -#define __SYSTEM_CONTROL1 0x00000400 -#define __ARBITER 0x00020000 -#define __SYSTEM_CONTROL2 0x00040000 -#define __SYSTEM_CONTROL3 0x00060000 -#define __PARALLEL_PORT 0x00080000 -#define __VIDMEM_CONTROL 0x00100000 -#define __UPDATE_FIFO 0x00120000 -#define __SHMEM_CONTROL1 0x00140000 -#define __INTERRUPT_CONTROL 0x00160000 -#define __USB_CONTROL 0x00180000 -#define __TRACK_INTERFACE 0x001a0000 -#define __MOUSE_INTERFACE 0x001b0000 -#define __KEYPAD_INTERFACE 0x001c0000 -#define __PCMCIA_INTERFACE 0x001e0000 -#define __VGA_CONTROL 0x00200000 -#define __GPIO_INTERFACE 0x00300000 - -/* -* Macro that calculates real address for registers in the SA-1101 -*/ - -#define _SA1101 ( x ) ((x) + SA1101_BASE) - -/* -* Interface and shared memory controller registers -* -* Registers -* SKCR SA-1101 control register (read/write) -* SMCR Shared Memory Controller Register -* SNPR Snoop Register -*/ - -#define _SKCR _SA1101( 0x00000000 )/* SA-1101 Control Reg. */ -#define _SMCR _SA1101( 0x00140000 )/* Shared Mem. Control Reg. */ -#define _SNPR _SA1101( 0x00140400 )/* Snoop Reg. */ - -#if LANGUAGE ==C -#define SKCR (*((volatile Word *) SA1101_p2v (_SKCR))) -#define SMCR (*((volatile Word *) SA1101_p2v (_SMCR))) -#define SNPR (*((volatile Word *) SA1101_p2v (_SNPR))) - -#define SKCR_PLLEn 0x0001/* Enable On-Chip PLL */ -#define SKCR_BCLKEn 0x0002/* Enables BCLK */ -#define SKCR_Sleep 0x0004/* Sleep Mode */ -#define SKCR_IRefEn 0x0008/* DAC Iref input enable */ -#define SKCR_VCOON 0x0010/* VCO bias */ -#define SKCR_ScanTestEn 0x0020/* Enables scan test */ -#define SKCR_ClockTestEn 0x0040/* Enables clock test */ - -#define SMCR_DCAC Fld(2,0)/* Number of column address bits */ -#define SMCR_DRAC Fld(2,2)/* Number of row address bits */ -#define SMCR_ArbiterBias 0x0008/* favor video or USB */ -#define SMCR_TopVidMem Fld(4,5)/* Top 4 bits of vidmem addr. */ - -#define SMCR_ColAdrBits ( x )/* col. addr bits 8..11 */ \ - (( (x) - 8 ) << FShft (SMCR_DCAC)) -#define SMCR_RowAdrBits ( x )/* row addr bits 9..12 */ \ - (( (x) - 9 ) << FShft (SMCR_DRAC)) - -#define SNPR_VFBstart Fld(12,0)/* Video frame buffer addr */ -#define SNPR_VFBsize Fld(11,12)/* Video frame buffer size */ -#define SNPR_WholeBank (1 << 23)/* Whole bank bit */ -#define SNPR_BankSelect Fld(2,27)/* Bank select */ -#define SNPR_SnoopEn (1 << 31)/* Enable snoop operation */ - -#define SNPR_Set_VFBsize ( x )/* set frame buffer size (in kb) */ \ - ( (x) << FShft (SNPR_VFBsize)) -#define SNPR_Select_Bank (x)/* select bank 0 or 1 */ \ - (( (x) + 1 ) << FShft (SNPR_BankSelect )) - -#endif /* LANGUAGE == C */ - -/* -* Video Memory Controller -* -* Registers -* VMCCR Configuration register -* VMCAR VMC address register -* VMCDR VMC data register -* -*/ - -#define _VMCCR _SA1101( 0x00100000 )/* Configuration register */ -#define _VMCAR _SA1101( 0x00101000 )/* VMC address register */ -#define _VMCDR _SA1101( 0x00101400 )/* VMC data register */ - -#if LANGUAGE ==C -#define VMCCR (*((volatile Word *) SA1101_p2v (_VMCCR))) -#define VMCAR (*((volatile Word *) SA1101_p2v (_VMCAR))) -#define VMCDR (*((volatile Word *) SA1101_p2v (_VMCDR))) - -#define VMCCR_RefreshEn 0x0000/* Enable memory refresh */ -#define VMCCR_Config 0x0001/* DRAM size */ -#define VMCCR_RefPeriod Fld(2,3)/* Refresh period */ -#define VMCCR_StaleDataWait Fld(4,5)/* Stale FIFO data timeout counter */ -#define VMCCR_SleepState (1<<9)/* State of interface pins in sleep*/ -#define VMCCR_RefTest (1<<10)/* refresh test */ -#define VMCCR_RefLow Fld(6,11)/* refresh low counter */ -#define VMCCR_RefHigh Fld(7,17)/* refresh high counter */ -#define VMCCR_SDTCTest Fld(7,24)/* stale data timeout counter */ -#define VMCCR_ForceSelfRef (1<<31)/* Force self refresh */ - -#endif LANGUAGE ==C - - -/* Update FIFO -* -* Registers -* UFCR Update FIFO Control Register -* UFSR Update FIFO Status Register -* UFLVLR update FIFO level register -* UFDR update FIFO data register - */ - -#define _UFCR _SA1101(0x00120000)/* Update FIFO Control Reg. */ -#define _UFSR _SA1101(0x00120400)/* Update FIFO Status Reg. */ -#define _UFLVLR _SA1101(0x00120800)/* Update FIFO level reg. */ -#define _UFDR _SA1101(0x00120c00)/* Update FIFO data reg. */ - -#if LANGUAGE ==C - -#define UFCR (*((volatile Word *) SA1101_p2v (_UFCR))) -#define UFSR (*((volatile Word *) SA1101_p2v (_UFSR))) -#define UFLVLR (*((volatile Word *) SA1101_p2v (_UFLVLR))) -#define UFDR (*((volatile Word *) SA1101_p2v (_UFDR))) - - -#define UFCR_FifoThreshhold Fld(7,0)/* Level for FifoGTn flag */ - -#define UFSR_FifoGTnFlag 0x01/* FifoGTn flag */ #define UFSR_FifoEmpty 0x80/* FIFO is empty */ - -#endif /* LANGUAGE == C */ - -/* System Controller -* -* Registers -* SKPCR Power Control Register -* SKCDR Clock Divider Register -* DACDR1 DAC1 Data register -* DACDR2 DAC2 Data register -*/ - -#define _SKPCR _SA1101(0x00000400) -#define _SKCDR _SA1101(0x00040000) -#define _DACDR1 _SA1101(0x00060000) -#define _DACDR2 _SA1101(0x00060400) - -#if LANGUAGE ==C -#define SKPCR (*((volatile Word *) SA1101_p2v (_SKPCR))) -#define SKCDR (*((volatile Word *) SA1101_p2v (_SKCDR))) -#define DACDR1 (*((volatile Word *) SA1101_p2v (_DACDR1))) -#define DACDR2 (*((volatile Word *) SA1101_p2v (_DACDR2))) - -#define SKPCR_UCLKEn 0x01/* USB Enable */ -#define SKPCR_PCLKEn 0x02/* PS/2 Enable */ -#define SKPCR_ICLKEn 0x04/* Interrupt Controller Enable */ -#define SKPCR_VCLKEn 0x08/* Video Controller Enable */ -#define SKPCR_PICLKEn 0x10/* parallel port Enable */ -#define SKPCR_DCLKEn 0x20/* DACs Enable */ -#define SKPCR_nKPADEn 0x40/* Multiplexer */ - -#define SKCDR_PLLMul Fld(7,0)/* PLL Multiplier */ -#define SKCDR_VCLKEn Fld(2,7)/* Video controller clock divider */ -#define SKDCR_BCLKEn (1<<9)/* BCLK Divider */ -#define SKDCR_UTESTCLKEn (1<<10)/* Route USB clock during test mode */ -#define SKDCR_DivRValue Fld(6,11)/* Input clock divider for PLL */ -#define SKDCR_DivNValue Fld(5,17)/* Output clock divider for PLL */ -#define SKDCR_PLLRSH Fld(3,22)/* PLL bandwidth control */ -#define SKDCR_ChargePump (1<<25)/* Charge pump control */ -#define SKDCR_ClkTestMode (1<<26)/* Clock output test mode */ -#define SKDCR_ClkTestEn (1<<27)/* Test clock generator */ -#define SKDCR_ClkJitterCntl Fld(3,28)/* video clock jitter compensation */ - -#define DACDR_DACCount Fld(8,0)/* Count value */ -#define DACDR1_DACCount DACDR_DACCount -#define DACDR2_DACCount DACDR_DACCount - -#endif /* LANGUAGE == C */ - -/* -* Parallel Port Interface -* -* Registers -* IEEE_Config IEEE mode selection and programmable attributes -* IEEE_Control Controls the states of IEEE port control outputs -* IEEE_Data Forward transfer data register -* IEEE_Addr Forward transfer address register -* IEEE_Status Port IO signal status register -* IEEE_IntStatus Port interrupts status register -* IEEE_FifoLevels Rx and Tx FIFO interrupt generation levels -* IEEE_InitTime Forward timeout counter initial value -* IEEE_TimerStatus Forward timeout counter current value -* IEEE_FifoReset Reset forward transfer FIFO -* IEEE_ReloadValue Counter reload value -* IEEE_TestControl Control testmode -* IEEE_TestDataIn Test data register -* IEEE_TestDataInEn Enable test data -* IEEE_TestCtrlIn Test control signals -* IEEE_TestCtrlInEn Enable test control signals -* IEEE_TestDataStat Current data bus value -* -*/ - -/* -* The control registers are defined as offsets from a base address -*/ - -#define _IEEE ( x ) _SA1101( (x) + __PARALLEL_PORT ) - -#define _IEEE_Config _IEEE( 0x0000 ) -#define _IEEE_Control _IEEE( 0x0400 ) -#define _IEEE_Data _IEEE( 0x4000 ) -#define _IEEE_Addr _IEEE( 0x0800 ) -#define _IEEE_Status _IEEE( 0x0c00 ) -#define _IEEE_IntStatus _IEEE( 0x1000 ) -#define _IEEE_FifoLevels _IEEE( 0x1400 ) -#define _IEEE_InitTime _IEEE( 0x1800 ) -#define _IEEE_TimerStatus _IEEE( 0x1c00 ) -#define _IEEE_FifoReset _IEEE( 0x2000 ) -#define _IEEE_ReloadValue _IEEE( 0x3c00 ) -#define _IEEE_TestControl _IEEE( 0x2400 ) -#define _IEEE_TestDataIn _IEEE( 0x2800 ) -#define _IEEE_TestDataInEn _IEEE( 0x2c00 ) -#define _IEEE_TestCtrlIn _IEEE( 0x3000 ) -#define _IEEE_TestCtrlInEn _IEEE( 0x3400 ) -#define _IEEE_TestDataStat _IEEE( 0x3800 ) - - -#if LANGUAGE ==C -#define IEEE_Config (*((volatile Word *) SA1101_p2v (_IEEE_Config))) -#define IEEE_Control (*((volatile Word *) SA1101_p2v (_IEEE_Control))) -#define IEEE_Data (*((volatile Word *) SA1101_p2v (_IEEE_Data))) -#define IEEE_Addr (*((volatile Word *) SA1101_p2v (_IEEE_Addr))) -#define IEEE_Status (*((volatile Word *) SA1101_p2v (_IEEE_Status))) -#define IEEE_IntStatus (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus))) -#define IEEE_FifoLevels (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels))) -#define IEEE_InitTime (*((volatile Word *) SA1101_p2v (_IEEE_InitTime))) -#define IEEE_TimerStatus (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus))) -#define IEEE_FifoReset (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset))) -#define IEEE_ReloadValue (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue))) -#define IEEE_TestControl (*((volatile Word *) SA1101_p2v (_IEEE_TestControl))) -#define IEEE_TestDataIn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn))) -#define IEEE_TestDataInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn))) -#define IEEE_TestCtrlIn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn))) -#define IEEE_TestCtrlInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn))) -#define IEEE_TestDataStat (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat))) - - -#define IEEE_Config_M Fld(3,0)/* Mode select */ -#define IEEE_Config_D 0x04/* FIFO access enable */ -#define IEEE_Config_B 0x08/* 9-bit word enable */ -#define IEEE_Config_T 0x10/* Data transfer enable */ -#define IEEE_Config_A 0x20/* Data transfer direction */ -#define IEEE_Config_E 0x40/* Timer enable */ -#define IEEE_Control_A 0x08/* AutoFd output */ -#define IEEE_Control_E 0x04/* Selectin output */ -#define IEEE_Control_T 0x02/* Strobe output */ -#define IEEE_Control_I 0x01/* Port init output */ -#define IEEE_Data_C (1<<31)/* Byte count */ -#define IEEE_Data_Db Fld(9,16)/* Data byte 2 */ -#define IEEE_Data_Da Fld(9,0)/* Data byte 1 */ -#define IEEE_Addr_A Fld(8,0)/* forward address transfer byte */ -#define IEEE_Status_A 0x0100/* nAutoFd port output status */ -#define IEEE_Status_E 0x0080/* nSelectIn port output status */ -#define IEEE_Status_T 0x0040/* nStrobe port output status */ -#define IEEE_Status_I 0x0020/* nInit port output status */ -#define IEEE_Status_B 0x0010/* Busy port inout status */ -#define IEEE_Status_S 0x0008/* Select port input status */ -#define IEEE_Status_K 0x0004/* nAck port input status */ -#define IEEE_Status_F 0x0002/* nFault port input status */ -#define IEEE_Status_R 0x0001/* pError port input status */ - -#define IEEE_IntStatus_IntReqDat 0x0100 -#define IEEE_IntStatus_IntReqEmp 0x0080 -#define IEEE_IntStatus_IntReqInt 0x0040 -#define IEEE_IntStatus_IntReqRav 0x0020 -#define IEEE_IntStatus_IntReqTim 0x0010 -#define IEEE_IntStatus_RevAddrComp 0x0008 -#define IEEE_IntStatus_RevDataComp 0x0004 -#define IEEE_IntStatus_FwdAddrComp 0x0002 -#define IEEE_IntStatus_FwdDataComp 0x0001 -#define IEEE_FifoLevels_RevFifoLevel 2 -#define IEEE_FifoLevels_FwdFifoLevel 1 -#define IEEE_InitTime_TimValInit Fld(22,0) -#define IEEE_TimerStatus_TimValStat Fld(22,0) -#define IEEE_ReloadValue_Reload Fld(4,0) - -#define IEEE_TestControl_RegClk 0x04 -#define IEEE_TestControl_ClockSelect Fld(2,1) -#define IEEE_TestControl_TimerTestModeEn 0x01 -#define IEEE_TestCtrlIn_PError 0x10 -#define IEEE_TestCtrlIn_nFault 0x08 -#define IEEE_TestCtrlIn_nAck 0x04 -#define IEEE_TestCtrlIn_PSel 0x02 -#define IEEE_TestCtrlIn_Busy 0x01 - -#endif /* LANGUAGE == C */ - -/* -* VGA Controller -* -* Registers -* VideoControl Video Control Register -* VgaTiming0 VGA Timing Register 0 -* VgaTiming1 VGA Timing Register 1 -* VgaTiming2 VGA Timing Register 2 -* VgaTiming3 VGA Timing Register 3 -* VgaBorder VGA Border Color Register -* VgaDBAR VGADMA Base Address Register -* VgaDCAR VGADMA Channel Current Address Register -* VgaStatus VGA Status Register -* VgaInterruptMask VGA Interrupt Mask Register -* VgaPalette VGA Palette Registers -* DacControl DAC Control Register -* VgaTest VGA Controller Test Register -*/ - -#define _VGA ( x ) _SA1101( ( x ) + __VGA_CONTROL ) - -#define _VideoControl _VGA( 0x0000 ) -#define _VgaTiming0 _VGA( 0x0400 ) -#define _VgaTiming1 _VGA( 0x0800 ) -#define _VgaTiming2 _VGA( 0x0c00 ) -#define _VgaTiming3 _VGA( 0x1000 ) -#define _VgaBorder _VGA( 0x1400 ) -#define _VgaDBAR _VGA( 0x1800 ) -#define _VgaDCAR _VGA( 0x1c00 ) -#define _VgaStatus _VGA( 0x2000 ) -#define _VgaInterruptMask _VGA( 0x2400 ) -#define _VgaPalette _VGA( 0x40000 ) -#define _DacControl _VGA( 0x3000 ) -#define _VgaTest _VGA( 0x2c00 ) - -#if (LANGUAGE ==C ) -#define VideoControl (*((volatile Word *) SA1101_p2v (_VideoControl))) -#define VgaTiming0 (*((volatile Word *) SA1101_p2v (_VgaTiming0))) -#define VgaTiming1 (*((volatile Word *) SA1101_p2v (_VgaTiming1))) -#define VgaTiming2 (*((volatile Word *) SA1101_p2v (_VgaTiming2))) -#define VgaTiming3 (*((volatile Word *) SA1101_p2v (_VgaTiming3))) -#define VgaBorder (*((volatile Word *) SA1101_p2v (_VgaBorder))) -#define VgaDBAR (*((volatile Word *) SA1101_p2v (_VgaDBAR))) -#define VgaDCAR (*((volatile Word *) SA1101_p2v (_VgaDCAR))) -#define VgaStatus (*((volatile Word *) SA1101_p2v (_VgaStatus))) -#define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask))) -#define VgaPalette (*((volatile Word *) SA1101_p2v (_VgaPalette))) -#define DacControl (*((volatile Word *) SA1101_p2v (_DacControl))) -#define VgaTest (*((volatile Word *) SA1101_p2v (_VgaTest))) - -#define VideoControl_VgaEn 0x00000000 -#define VideoControl_BGR 0x00000001 -#define VideoControl_VCompVal Fld(2,2) -#define VideoControl_VgaReq Fld(4,4) -#define VideoControl_VBurstL Fld(4,8) -#define VideoControl_VMode (1<<12) -#define VideoControl_PalRead (1<<13) - -#define VgaTiming0_PPL Fld(6,2) -#define VgaTiming0_HSW Fld(8,8) -#define VgaTiming0_HFP Fld(8,16) -#define VgaTiming0_HBP Fld(8,24) - -#define VgaTiming1_LPS Fld(10,0) -#define VgaTiming1_VSW Fld(6,10) -#define VgaTiming1_VFP Fld(8,16) -#define VgaTiming1_VBP Fld(8,24) - -#define VgaTiming2_IVS 0x01 -#define VgaTiming2_IHS 0x02 -#define VgaTiming2_CVS 0x04 -#define VgaTiming2_CHS 0x08 - -#define VgaTiming3_HBS Fld(8,0) -#define VgaTiming3_HBE Fld(8,8) -#define VgaTiming3_VBS Fld(8,16) -#define VgaTiming3_VBE Fld(8,24) - -#define VgaBorder_BCOL Fld(24,0) - -#define VgaStatus_VFUF 0x01 -#define VgaStatus_VNext 0x02 -#define VgaStatus_VComp 0x04 - -#define VgaInterruptMask_VFUFMask 0x00 -#define VgaInterruptMask_VNextMask 0x01 -#define VgaInterruptMask_VCompMask 0x02 - -#define VgaPalette_R Fld(8,0) -#define VgaPalette_G Fld(8,8) -#define VgaPalette_B Fld(8,16) - -#define DacControl_DACON 0x0001 -#define DacControl_COMPON 0x0002 -#define DacControl_PEDON 0x0004 -#define DacControl_RTrim Fld(5,4) -#define DacControl_GTrim Fld(5,9) -#define DacControl_BTrim Fld(5,14) - -#define VgaTest_TDAC 0x00 -#define VgaTest_Datatest Fld(4,1) -#define VgaTest_DACTESTDAC 0x10 -#define VgaTest_DACTESTOUT Fld(3,5) - -#endif /* LANGUAGE == C */ - -/* -* USB Host Interface Controller -* -* Registers -* Revision -* Control -* CommandStatus -* InterruptStatus -* InterruptEnable -* HCCA -* PeriodCurrentED -* ControlHeadED -* BulkHeadED -* BulkCurrentED -* DoneHead -* FmInterval -* FmRemaining -* FmNumber -* PeriodicStart -* LSThreshold -* RhDescriptorA -* RhDescriptorB -* RhStatus -* RhPortStatus -* USBStatus -* USBReset -* USTAR -* USWER -* USRFR -* USNFR -* USTCSR -* USSR -* -*/ - -#define _USB ( x ) _SA1101( ( x ) + __USB_CONTROL ) - - -#define _Revision _USB( 0x0000 ) -#define _Control _USB( 0x0888 ) -#define _CommandStatus _USB( 0x0c00 ) -#define _InterruptStatus _USB( 0x1000 ) -#define _InterruptEnable _USB( 0x1400 ) -#define _HCCA _USB( 0x1800 ) -#define _PeriodCurrentED _USB( 0x1c00 ) -#define _ControlHeadED _USB( 0x2000 ) -#define _BulkHeadED _USB( 0x2800 ) -#define _BulkCurrentED _USB( 0x2c00 ) -#define _DoneHead _USB( 0x3000 ) -#define _FmInterval _USB( 0x3400 ) -#define _FmRemaining _USB( 0x3800 ) -#define _FmNumber _USB( 0x3c00 ) -#define _PeriodicStart _USB( 0x4000 ) -#define _LSThreshold _USB( 0x4400 ) -#define _RhDescriptorA _USB( 0x4800 ) -#define _RhDescriptorB _USB( 0x4c00 ) -#define _RhStatus _USB( 0x5000 ) -#define _RhPortStatus _USB( 0x5400 ) -#define _USBStatus _USB( 0x11800 ) -#define _USBReset _USB( 0x11c00 ) - -#define _USTAR _USB( 0x10400 ) -#define _USWER _USB( 0x10800 ) -#define _USRFR _USB( 0x10c00 ) -#define _USNFR _USB( 0x11000 ) -#define _USTCSR _USB( 0x11400 ) -#define _USSR _USB( 0x11800 ) - - -#if (LANGUAGE ==C ) - -#define Revision (*((volatile Word *) SA1101_p2v (_Revision))) -#define Control (*((volatile Word *) SA1101_p2v (_Control))) -#define CommandStatus (*((volatile Word *) SA1101_p2v (_CommandStatus))) -#define InterruptStatus (*((volatile Word *) SA1101_p2v (_InterruptStatus))) -#define InterruptEnable (*((volatile Word *) SA1101_p2v (_InterruptEnable))) -#define HCCA (*((volatile Word *) SA1101_p2v (_HCCA))) -#define PeriodCurrentED (*((volatile Word *) SA1101_p2v (_PeriodCurrentED))) -#define ControlHeadED (*((volatile Word *) SA1101_p2v (_ControlHeadED))) -#define BulkHeadED (*((volatile Word *) SA1101_p2v (_BulkHeadED))) -#define BulkCurrentED (*((volatile Word *) SA1101_p2v (_BulkCurrentED))) -#define DoneHead (*((volatile Word *) SA1101_p2v (_DoneHead))) -#define FmInterval (*((volatile Word *) SA1101_p2v (_FmInterval))) -#define FmRemaining (*((volatile Word *) SA1101_p2v (_FmRemaining))) -#define FmNumber (*((volatile Word *) SA1101_p2v (_FmNumber))) -#define PeriodicStart (*((volatile Word *) SA1101_p2v (_PeriodicStart))) -#define LSThreshold (*((volatile Word *) SA1101_p2v (_LSThreshold))) -#define RhDescriptorA (*((volatile Word *) SA1101_p2v (_RhDescriptorA))) -#define RhDescriptorB (*((volatile Word *) SA1101_p2v (_RhDescriptorB))) -#define RhStatus (*((volatile Word *) SA1101_p2v (_RhStatus))) -#define RhPortStatus (*((volatile Word *) SA1101_p2v (_RhPortStatus))) -#define USBStatus (*((volatile Word *) SA1101_p2v (_USBStatus))) -#define USBReset (*((volatile Word *) SA1101_p2v (_USBReset))) -#define USTAR (*((volatile Word *) SA1101_p2v (_USTAR))) -#define USWER (*((volatile Word *) SA1101_p2v (_USWER))) -#define USRFR (*((volatile Word *) SA1101_p2v (_USRFR))) -#define USNFR (*((volatile Word *) SA1101_p2v (_USNFR))) -#define USTCSR (*((volatile Word *) SA1101_p2v (_USTCSR))) -#define USSR (*((volatile Word *) SA1101_p2v (_USSR))) - - -#define USBStatus_IrqHciRmtWkp (1<<7) -#define USBStatus_IrqHciBuffAcc (1<<8) -#define USBStatus_nIrqHciM (1<<9) -#define USBStatus_nHciMFClr (1<<10) - -#define USBReset_ForceIfReset 0x01 -#define USBReset_ForceHcReset 0x02 -#define USBReset_ClkGenReset 0x04 - -#define USTCR_RdBstCntrl Fld(3,0) -#define USTCR_ByteEnable Fld(4,3) -#define USTCR_WriteEn (1<<7) -#define USTCR_FifoCir (1<<8) -#define USTCR_TestXferSel (1<<9) -#define USTCR_FifoCirAtEnd (1<<10) -#define USTCR_nSimScaleDownClk (1<<11) - -#define USSR_nAppMDEmpty 0x01 -#define USSR_nAppMDFirst 0x02 -#define USSR_nAppMDLast 0x04 -#define USSR_nAppMDFull 0x08 -#define USSR_nAppMAFull 0x10 -#define USSR_XferReq 0x20 -#define USSR_XferEnd 0x40 - -#endif /* LANGUAGE == C */ - - -/* -* Interrupt Controller -* -* Registers -* INTTEST0 Test register 0 -* INTTEST1 Test register 1 -* INTENABLE0 Interrupt Enable register 0 -* INTENABLE1 Interrupt Enable register 1 -* INTPOL0 Interrupt Polarity selection 0 -* INTPOL1 Interrupt Polarity selection 1 -* INTTSTSEL Interrupt source selection -* INTSTATCLR0 Interrupt Status 0 -* INTSTATCLR1 Interrupt Status 1 -* INTSET0 Interrupt Set 0 -* INTSET1 Interrupt Set 1 -*/ - -#define _INT ( x ) _SA1101( ( x ) + __INTERRUPT_CONTROL) - -#define _INTTEST0 _INT( 0x1000 ) -#define _INTTEST1 _INT( 0x1400 ) -#define _INTENABLE0 _INT( 0x2000 ) -#define _INTENABLE1 _INT( 0x2400 ) -#define _INTPOL0 _INT( 0x3000 ) -#define _INTPOL1 _INT( 0x3400 ) -#define _INTTSTSEL _INT( 0x5000 ) -#define _INTSTATCLR0 _INT( 0x6000 ) -#define _INTSTATCLR1 _INT( 0x6400 ) -#define _INTSET0 _INT( 0x7000 ) -#define _INTSET1 _INT( 0x7400 ) - -#if (LANGUAGE ==C ) -#define INTTEST0 (*((volatile Word *) SA1101_p2v (_INTTEST0))) -#define INTTEST1 (*((volatile Word *) SA1101_p2v (_INTTEST1))) -#define INTENABLE0 (*((volatile Word *) SA1101_p2v (_INTENABLE0))) -#define INTENABLE1 (*((volatile Word *) SA1101_p2v (_INTENABLE1))) -#define INTPOL0 (*((volatile Word *) SA1101_p2v (_INTPOL0))) -#define INTPOL1 (*((volatile Word *) SA1101_p2v (_INTPOL1))) -#define INTTSTSEL (*((volatile Word *) SA1101_p2v (_INTTSTSEL))) -#define INTSTATCLR0 (*((volatile Word *) SA1101_p2v (_INTSTATCLR0))) -#define INTSTATCLR1 (*((volatile Word *) SA1101_p2v (_INTSTATCLR1))) -#define INTSET0 (*((volatile Word *) SA1101_p2v (_INTSET0))) -#define INTSET1 (*((volatile Word *) SA1101_p2v (_INTSET1))) - -#endif /* LANGUAGE == C */ - -/* -* PS/2 Trackpad and Mouse Interfaces -* -* Registers (prefix kbd applies to trackpad interface, mse to mouse) -* KBDCR Control Register -* KBDSTAT Status Register -* KBDDATA Transmit/Receive Data register -* KBDCLKDIV Clock Division Register -* KBDPRECNT Clock Precount Register -* KBDTEST1 Test register 1 -* KBDTEST2 Test register 2 -* KBDTEST3 Test register 3 -* KBDTEST4 Test register 4 -* MSECR -* MSESTAT -* MSEDATA -* MSECLKDIV -* MSEPRECNT -* MSETEST1 -* MSETEST2 -* MSETEST3 -* MSETEST4 -* -*/ - -#define _KBD ( x ) _SA1101( ( x ) + __TRACK_INTERFACE ) -#define _MSE ( x ) _SA1101( ( x ) + __MOUSE_INTERFACE ) - -#define _KBDCR _KBD( 0x0000 ) -#define _KBDSTAT _KBD( 0x0400 ) -#define _KBDDATA _KBD( 0x0800 ) -#define _KBDCLKDIV _KBD( 0x0c00 ) -#define _KBDPRECNT _KBD( 0x1000 ) -#define _KBDTEST1 _KBD( 0x2000 ) -#define _KBDTEST2 _KBD( 0x2400 ) -#define _KBDTEST3 _KBD( 0x2800 ) -#define _KBDTEST4 _KBD( 0x2c00 ) -#define _MSECR _MSE( 0x0000 ) -#define _MSESTAT _MSE( 0x0400 ) -#define _MSEDATA _MSE( 0x0800 ) -#define _MSECLKDIV _MSE( 0x0c00 ) -#define _MSEPRECNT _MSE( 0x1000 ) -#define _MSETEST1 _MSE( 0x2000 ) -#define _MSETEST2 _MSE( 0x2400 ) -#define _MSETEST3 _MSE( 0x2800 ) -#define _MSETEST4 _MSE( 0x2c00 ) - -#if (LANGUAGE ==C ) - -#define KBDCR (*((volatile Word *) SA1101_p2v (_KBDCR))) -#define KBDSTAT (*((volatile Word *) SA1101_p2v (_KBDSTAT))) -#define KBDDATA (*((volatile Word *) SA1101_p2v (_KBDDATA))) -#define KBDCLKDIV (*((volatile Word *) SA1101_p2v (_KBDCLKDIV))) -#define KBDPRECNT (*((volatile Word *) SA1101_p2v (_KBDPRECNT))) -#define KBDTEST1 (*((volatile Word *) SA1101_p2v (_KBDTEST1))) -#define KBDTEST2 (*((volatile Word *) SA1101_p2v (_KBDTEST2))) -#define KBDTEST3 (*((volatile Word *) SA1101_p2v (_KBDTEST3))) -#define KBDTEST4 (*((volatile Word *) SA1101_p2v (_KBDTEST4))) -#define MSECR (*((volatile Word *) SA1101_p2v (_MSECR))) -#define MSESTAT (*((volatile Word *) SA1101_p2v (_MSESTAT))) -#define MSEDATA (*((volatile Word *) SA1101_p2v (_MSEDATA))) -#define MSECLKDIV (*((volatile Word *) SA1101_p2v (_MSECLKDIV))) -#define MSEPRECNT (*((volatile Word *) SA1101_p2v (_MSEPRECNT))) -#define MSETEST1 (*((volatile Word *) SA1101_p2v (_MSETEST1))) -#define MSETEST2 (*((volatile Word *) SA1101_p2v (_MSETEST2))) -#define MSETEST3 (*((volatile Word *) SA1101_p2v (_MSETEST3))) -#define MSETEST4 (*((volatile Word *) SA1101_p2v (_MSETEST4))) - - -#define KBDCR_ENA 0x08 -#define KBDCR_FKD 0x02 -#define KBDCR_FKC 0x01 - -#define KBDSTAT_TXE 0x80 -#define KBDSTAT_TXB 0x40 -#define KBDSTAT_RXF 0x20 -#define KBDSTAT_RXB 0x10 -#define KBDSTAT_ENA 0x08 -#define KBDSTAT_RXP 0x04 -#define KBDSTAT_KBD 0x02 -#define KBDSTAT_KBC 0x01 - -#define KBDCLKDIV_DivVal Fld(4,0) - -#define MSECR_ENA 0x08 -#define MSECR_FKD 0x02 -#define MSECR_FKC 0x01 - -#define MSESTAT_TXE 0x80 -#define MSESTAT_TXB 0x40 -#define MSESTAT_RXF 0x20 -#define MSESTAT_RXB 0x10 -#define MSESTAT_ENA 0x08 -#define MSESTAT_RXP 0x04 -#define MSESTAT_MSD 0x02 -#define MSESTAT_MSC 0x01 - -#define MSECLKDIV_DivVal Fld(4,0) - -#define KBDTEST1_CD 0x80 -#define KBDTEST1_RC1 0x40 -#define KBDTEST1_MC 0x20 -#define KBDTEST1_C Fld(2,3) -#define KBDTEST1_T2 0x40 -#define KBDTEST1_T1 0x20 -#define KBDTEST1_T0 0x10 -#define KBDTEST2_TICBnRES 0x08 -#define KBDTEST2_RKC 0x04 -#define KBDTEST2_RKD 0x02 -#define KBDTEST2_SEL 0x01 -#define KBDTEST3_ms_16 0x80 -#define KBDTEST3_us_64 0x40 -#define KBDTEST3_us_16 0x20 -#define KBDTEST3_DIV8 0x10 -#define KBDTEST3_DIn 0x08 -#define KBDTEST3_CIn 0x04 -#define KBDTEST3_KD 0x02 -#define KBDTEST3_KC 0x01 -#define KBDTEST4_BC12 0x80 -#define KBDTEST4_BC11 0x40 -#define KBDTEST4_TRES 0x20 -#define KBDTEST4_CLKOE 0x10 -#define KBDTEST4_CRES 0x08 -#define KBDTEST4_RXB 0x04 -#define KBDTEST4_TXB 0x02 -#define KBDTEST4_SRX 0x01 - -#define MSETEST1_CD 0x80 -#define MSETEST1_RC1 0x40 -#define MSETEST1_MC 0x20 -#define MSETEST1_C Fld(2,3) -#define MSETEST1_T2 0x40 -#define MSETEST1_T1 0x20 -#define MSETEST1_T0 0x10 -#define MSETEST2_TICBnRES 0x08 -#define MSETEST2_RKC 0x04 -#define MSETEST2_RKD 0x02 -#define MSETEST2_SEL 0x01 -#define MSETEST3_ms_16 0x80 -#define MSETEST3_us_64 0x40 -#define MSETEST3_us_16 0x20 -#define MSETEST3_DIV8 0x10 -#define MSETEST3_DIn 0x08 -#define MSETEST3_CIn 0x04 -#define MSETEST3_KD 0x02 -#define MSETEST3_KC 0x01 -#define MSETEST4_BC12 0x80 -#define MSETEST4_BC11 0x40 -#define MSETEST4_TRES 0x20 -#define MSETEST4_CLKOE 0x10 -#define MSETEST4_CRES 0x08 -#define MSETEST4_RXB 0x04 -#define MSETEST4_TXB 0x02 -#define MSETEST4_SRX 0x01 - -#endif /* LANGUAGE == C */ - - -/* -* General-Purpose I/O Interface -* -* Registers -* PADWR Port A Data Write Register -* PBDWR Port B Data Write Register -* PADRR Port A Data Read Register -* PBDRR Port B Data Read Register -* PADDR Port A Data Direction Register -* PBDDR Port B Data Direction Register -* PASSR Port A Sleep State Register -* PBSSR Port B Sleep State Register -* -*/ - -#define _PIO ( x ) _SA1101( ( x ) + __GPIO_INTERFACE ) - -#define _PADWR _PIO( 0x0000 ) -#define _PBDWR _PIO( 0x0400 ) -#define _PADRR _PIO( 0x0000 ) -#define _PBDRR _PIO( 0x0400 ) -#define _PADDR _PIO( 0x0800 ) -#define _PBDDR _PIO( 0x0c00 ) -#define _PASSR _PIO( 0x1000 ) -#define _PBSSR _PIO( 0x1400 ) - - -#if (LANGUAGE ==C ) - - -#define PADWR (*((volatile Word *) SA1101_p2v (_PADWR))) -#define PBDWR (*((volatile Word *) SA1101_p2v (_PBDWR))) -#define PADRR (*((volatile Word *) SA1101_p2v (_PADRR))) -#define PBDRR (*((volatile Word *) SA1101_p2v (_PBDRR))) -#define PADDR (*((volatile Word *) SA1101_p2v (_PADDR))) -#define PBDDR (*((volatile Word *) SA1101_p2v (_PBDDR))) -#define PASSR (*((volatile Word *) SA1101_p2v (_PASSR))) -#define PBSSR (*((volatile Word *) SA1101_p2v (_PBSSR))) - -#endif - - - -/* -* Keypad Interface -* -* Registers -* PXDWR -* PXDRR -* PYDWR -* PYDRR -* -*/ - -#define _KEYPAD ( x ) _SA1101( ( x ) + __KEYPAD_INTERFACE ) - -#define _PXDWR _KEYPAD( 0x0000 ) -#define _PXDRR _KEYPAD( 0x0000 ) -#define _PYDWR _KEYPAD( 0x0400 ) -#define _PYDRR _KEYPAD( 0x0400 ) - -#if (LANGUAGE ==C ) - - -#define PXDWR (*((volatile Word *) SA1101_p2v (_PXDWR))) -#define PXDRR (*((volatile Word *) SA1101_p2v (_PXDRR))) -#define PYDWR (*((volatile Word *) SA1101_p2v (_PYDWR))) -#define PYDRR (*((volatile Word *) SA1101_p2v (_PYDRR))) - -#endif - - - -/* -* PCMCIA Interface -* -* Registers -* PCSR Status Register -* PCCR Control Register -* PCSSR Sleep State Register -* -*/ - -#define _CARD ( x ) _SA1101( ( x ) + __PCMCIA_INTERFACE ) - -#define _PCSR _CARD( 0x0000 ) -#define _PCCR _CARD( 0x0400 ) -#define _PCSSR _CARD( 0x0800 ) - -#if (LANGUAGE ==C ) -#define PCSR (*((volatile Word *) SA1101_p2v (_PCSR))) -#define PCCR (*((volatile Word *) SA1101_p2v (_PCCR))) -#define PCSSR (*((volatile Word *) SA1101_p2v (_PCSSR))) - -#define PCSR_S0_ready 0x0001 -#define PCSR_S1_ready 0x0002 -#define PCSR_S0_detected 0x0004 -#define PCSR_S1_detected 0x0008 -#define PCSR_S0_VS1 0x0010 -#define PCSR_S0_VS2 0x0020 -#define PCSR_S1_VS1 0x0040 -#define PCSR_S1_VS2 0x0080 -#define PCSR_S0_WP 0x0100 -#define PCSR_S1_WP 0x0200 -#define PCSR_S0_BVD1_nSTSCHG 0x0400 -#define PCSR_S0_BVD2_nSPKR 0x0800 -#define PCSR_S1_BVD1_nSTSCHG 0x1000 -#define PCSR_S1_BVD2_nSPKR 0x2000 - -#define PCCR_S0_VPP0 0x0001 -#define PCCR_S0_VPP1 0x0002 -#define PCCR_S0_VCC0 0x0004 -#define PCCR_S0_VCC1 0x0008 -#define PCCR_S1_VPP0 0x0010 -#define PCCR_S1_VPP1 0x0020 -#define PCCR_S1_VCC0 0x0040 -#define PCCR_S1_VCC1 0x0080 -#define PCCR_S0_reset 0x0100 -#define PCCR_S1_reset 0x0200 -#define PCCR_S0_float 0x0400 -#define PCCR_S1_float 0x0800 - -#define PCSSR_S0_VCC0 0x0001 -#define PCSSR_S0_VCC1 0x0002 -#define PCSSR_S0_VPP0 0x0004 -#define PCSSR_S0_VPP1 0x0008 -#define PCSSR_S0_control 0x0010 -#define PCSSR_S1_VCC0 0x0020 -#define PCSSR_S1_VCC1 0x0040 -#define PCSSR_S1_VPP0 0x0080 -#define PCSSR_S1_VPP1 0x0100 -#define PCSSR_S1_control 0x0200 - -#endif - -#undef C -#undef Assembly
arch/arm/mach-sa1100/include/mach/hardware.h +0 -4
@@ -74,8 +74,4 @@ static inline unsigned long get_clock_tick_rate(void)#include "SA-1100.h" -#ifdef CONFIG_SA1101 -#include "SA-1101.h" -#endif -#endif /* _ASM_ARCH_HARDWARE_H */
Signature · 1 line
1.9.0