Skip to contentSkip to conversation

vpmu intel: Use PMU defines instead of numerals and bit masks

PATCH In review Dietmar Hahn 2 participants 3 messages Mar 27, 2013 – Mar 28, 2013

lore
Share & tools
lore
#0 lore raw

PATCH 2/3 vpmu intel: Use PMU defines instead of numerals and bit masks

This patch uses the new defines in Intel vPMU to replace existing numerals and bit masks.
Thanks,
Dietmar.

xen/arch/x86/hvm/vmx/vpmu_core2.c +26 -20
Index: xen-unstable.hg/xen/arch/x86/hvm/vmx/vpmu_core2.c
===================================================================
@@ -39,6 +39,23 @@
 #include <asm/hvm/vmx/vpmu_core2.h>
 
 /*
+ * See Intel SDM Vol 2a Instruction Set Referenc for CPUID instruction.
+ * cpuid 0xa - Architectural Performance Monitoring Leaf
+ * Register eax
+ */
+#define X86_FEATURE_PMU_VER_OFF   0  /* Version ID */
+#define FEATURE_PMU_VER_BITS      8  /* 8 bits 0..7 */
+#define X86_FEATURE_NUM_GEN_OFF   8  /* Number of general pmu registers */
+#define FEATURE_NUM_GEN_BITS      8  /* 8 bits 8..15 */
+#define X86_FEATURE_GEN_WIDTH_OFF 16 /* Width of general pmu registers */
+#define FEATURE_GEN_WIDTH_BITS    8  /* 8 bits 16..23 */
+/* Register edx */
+#define X86_FEATURE_NUM_FIX_OFF   0  /* Number of fixed pmu registers */
+#define FEATURE_NUM_FIX_BITS      5  /* 5 bits 0..4 */
+#define X86_FEATURE_FIX_WIDTH_OFF 5  /* Width of fixed pmu registers */
+#define FEATURE_FIX_WIDTH_BITS    8  /* 8 bits 5..12 */
+
+/*
  * QUIRK to workaround an issue on Nehalem processors currently seen
  * on family 6 cpus E5520 (model 26) and X7542 (model 46).
  * The issue leads to endless PMC interrupt loops on the processor.
@@ -130,14 +147,18 @@ static const struct pmumsr core2_ctrls =
 };
 static int arch_pmc_cnt;
 
+/*
+ * Read the number of general counters via CPUID.EAX[0xa].EAX[8..15]
+ */
 static int core2_get_pmc_count(void)
 {
     u32 eax, ebx, ecx, edx;
 
     if ( arch_pmc_cnt == 0 )
     {
+        u32 mask = ((1 << FEATURE_NUM_GEN_BITS) - 1) << X86_FEATURE_NUM_GEN_OFF;
         cpuid(0xa, &eax, &ebx, &ecx, &edx);
-        arch_pmc_cnt = (eax & 0xff00) >> 8;
+        arch_pmc_cnt = (eax & mask) >> X86_FEATURE_NUM_GEN_OFF;
     }
 
     return arch_pmc_cnt;
@@ -153,9 +174,11 @@ static u64 core2_calc_intial_glb_ctrl_ms
 /* edx bits 5-12: Bit width of fixed-function performance counters  */
 static int core2_get_bitwidth_fix_count(void)
 {
-    u32 eax, ebx, ecx, edx;
+    u32 eax, ebx, ecx, edx, mask;
+
+    mask = ((1 << FEATURE_FIX_WIDTH_BITS) - 1) << X86_FEATURE_FIX_WIDTH_OFF;
     cpuid(0xa, &eax, &ebx, &ecx, &edx);
-    return ((edx & 0x1fe0) >> 5);
+    return ((edx & mask) >> X86_FEATURE_FIX_WIDTH_OFF);
 }
 
 static int is_core2_vpmu_msr(u32 msr_index, int *type, int *index)
@@ -731,23 +754,6 @@ struct arch_vpmu_ops core2_vpmu_ops = {
     .arch_vpmu_load = core2_vpmu_load
 };
 
-/*
- * See Intel SDM Vol 2a Instruction Set Referenc for CPUID instruction.
- * cpuid 0xa - Architectural Performance Monitoring Leaf
- * Register eax
- */
-#define X86_FEATURE_PMU_VER_OFF   0  /* Version ID */
-#define FEATURE_PMU_VER_BITS      8  /* 8 bits 0..7 */
-#define X86_FEATURE_NUM_GEN_OFF   8  /* Number of general pmu registers */
-#define FEATURE_NUM_GEN_BITS      8  /* 8 bits 8..15 */
-#define X86_FEATURE_GEN_WIDTH_OFF 16 /* Width of general pmu registers */
-#define FEATURE_GEN_WIDTH_BITS    8  /* 8 bits 16..23 */
-/* Register edx */
-#define X86_FEATURE_NUM_FIX_OFF   0  /* Number of fixed pmu registers */
-#define FEATURE_NUM_FIX_BITS      5  /* 5 bits 0..4 */
-#define X86_FEATURE_FIX_WIDTH_OFF 5  /* Width of fixed pmu registers */
-#define FEATURE_FIX_WIDTH_BITS    8  /* 8 bits 5..12 */
-
 static void core2_no_vpmu_do_cpuid(unsigned int input,
                                 unsigned int *eax, unsigned int *ebx,
                                 unsigned int *ecx, unsigned int *edx)
Signature · 1 line
Company details: http://ts.fujitsu.com/imprint.html
xen/arch/x86/hvm/vmx/vpmu_core2.c +26 -20

78 lines not on this page · raw message

_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xen.org/xen-devel

#1 lore raw
Quoted 13 lines · Dietmar Hahn

This patch uses the new defines in Intel vPMU to replace existing numerals and bit masks.
Thanks,
Dietmar.

Index: xen-unstable.hg/xen/arch/x86/hvm/vmx/vpmu_core2.c
===================================================================

xen/arch/x86/hvm/vmx/vpmu_core2.c line 43

Quoted 5 lines
xen/arch/x86/hvm/vmx/vpmu_core2.c +2 -0
@@ -39,6 +39,23 @@
 #include <asm/hvm/vmx/vpmu_core2.h>
 
 /*
+ * See Intel SDM Vol 2a Instruction Set Referenc for CPUID instruction.
+ * cpuid 0xa - Architectural Performance Monitoring Leaf

Chapter ?

xen/arch/x86/hvm/vmx/vpmu_core2.c line 56

Quoted 13 lines
xen/arch/x86/hvm/vmx/vpmu_core2.c +13 -0
+ * Register eax
+ */
+#define X86_FEATURE_PMU_VER_OFF   0  /* Version ID */
+#define FEATURE_PMU_VER_BITS      8  /* 8 bits 0..7 */
+#define X86_FEATURE_NUM_GEN_OFF   8  /* Number of general pmu registers */
+#define FEATURE_NUM_GEN_BITS      8  /* 8 bits 8..15 */
+#define X86_FEATURE_GEN_WIDTH_OFF 16 /* Width of general pmu registers */
+#define FEATURE_GEN_WIDTH_BITS    8  /* 8 bits 16..23 */
+/* Register edx */
+#define X86_FEATURE_NUM_FIX_OFF   0  /* Number of fixed pmu registers */
+#define FEATURE_NUM_FIX_BITS      5  /* 5 bits 0..4 */
+#define X86_FEATURE_FIX_WIDTH_OFF 5  /* Width of fixed pmu registers */
+#define FEATURE_FIX_WIDTH_BITS    8  /* 8 bits 5..12 */

I think the 'X86_FEATURE' and 'FEATURE' could be just chopped off? Then it is 'PMU_VER_BITS' or 'NUM_GEN_OFF'. Perhaps also have the mask in there?

That way you can could do:

PMU_VERSION_SHIFT
PMU_VERSION_MASK

And just use those in the logic below.

And for the other:

PMU_GENERAL_NR_SHIFT
PMU_GENERAL_NR_MASK
and
PMU_FIXED_NR_SHIFT
PMU_FIXED_NR_MASK?

PMU_FIXED_WIDTH_SHIFT
... and so on.

Quoted 158 lines
xen/arch/x86/hvm/vmx/vpmu_core2.c +11 -20
+
+/*
  * QUIRK to workaround an issue on Nehalem processors currently seen
  * on family 6 cpus E5520 (model 26) and X7542 (model 46).
  * The issue leads to endless PMC interrupt loops on the processor.
@@ -130,14 +147,18 @@ static const struct pmumsr core2_ctrls =
 };
 static int arch_pmc_cnt;
 
+/*
+ * Read the number of general counters via CPUID.EAX[0xa].EAX[8..15]
+ */
 static int core2_get_pmc_count(void)
 {
     u32 eax, ebx, ecx, edx;
 
     if ( arch_pmc_cnt == 0 )
     {
+        u32 mask = ((1 << FEATURE_NUM_GEN_BITS) - 1) << X86_FEATURE_NUM_GEN_OFF;
         cpuid(0xa, &eax, &ebx, &ecx, &edx);
-        arch_pmc_cnt = (eax & 0xff00) >> 8;
+        arch_pmc_cnt = (eax & mask) >> X86_FEATURE_NUM_GEN_OFF;
     }
 
     return arch_pmc_cnt;
@@ -153,9 +174,11 @@ static u64 core2_calc_intial_glb_ctrl_ms
 /* edx bits 5-12: Bit width of fixed-function performance counters  */
 static int core2_get_bitwidth_fix_count(void)
 {
-    u32 eax, ebx, ecx, edx;
+    u32 eax, ebx, ecx, edx, mask;
+
+    mask = ((1 << FEATURE_FIX_WIDTH_BITS) - 1) << X86_FEATURE_FIX_WIDTH_OFF;
     cpuid(0xa, &eax, &ebx, &ecx, &edx);
-    return ((edx & 0x1fe0) >> 5);
+    return ((edx & mask) >> X86_FEATURE_FIX_WIDTH_OFF);
 }
 
 static int is_core2_vpmu_msr(u32 msr_index, int *type, int *index)
@@ -731,23 +754,6 @@ struct arch_vpmu_ops core2_vpmu_ops = {
     .arch_vpmu_load = core2_vpmu_load
 };
 
-/*
- * See Intel SDM Vol 2a Instruction Set Referenc for CPUID instruction.
- * cpuid 0xa - Architectural Performance Monitoring Leaf
- * Register eax
- */
-#define X86_FEATURE_PMU_VER_OFF   0  /* Version ID */
-#define FEATURE_PMU_VER_BITS      8  /* 8 bits 0..7 */
-#define X86_FEATURE_NUM_GEN_OFF   8  /* Number of general pmu registers */
-#define FEATURE_NUM_GEN_BITS      8  /* 8 bits 8..15 */
-#define X86_FEATURE_GEN_WIDTH_OFF 16 /* Width of general pmu registers */
-#define FEATURE_GEN_WIDTH_BITS    8  /* 8 bits 16..23 */
-/* Register edx */
-#define X86_FEATURE_NUM_FIX_OFF   0  /* Number of fixed pmu registers */
-#define FEATURE_NUM_FIX_BITS      5  /* 5 bits 0..4 */
-#define X86_FEATURE_FIX_WIDTH_OFF 5  /* Width of fixed pmu registers */
-#define FEATURE_FIX_WIDTH_BITS    8  /* 8 bits 5..12 */
-
 static void core2_no_vpmu_do_cpuid(unsigned int input,
                                 unsigned int *eax, unsigned int *ebx,
                                 unsigned int *ecx, unsigned int *edx)
Signature · 5 lines
-- 
Company details: http://ts.fujitsu.com/imprint.html

Index: xen-unstable.hg/xen/arch/x86/hvm/vmx/vpmu_core2.c
===================================================================
xen/arch/x86/hvm/vmx/vpmu_core2.c +26 -20
@@ -39,6 +39,23 @@
 #include <asm/hvm/vmx/vpmu_core2.h>
 
 /*
+ * See Intel SDM Vol 2a Instruction Set Referenc for CPUID instruction.
+ * cpuid 0xa - Architectural Performance Monitoring Leaf
+ * Register eax
+ */
+#define X86_FEATURE_PMU_VER_OFF   0  /* Version ID */
+#define FEATURE_PMU_VER_BITS      8  /* 8 bits 0..7 */
+#define X86_FEATURE_NUM_GEN_OFF   8  /* Number of general pmu registers */
+#define FEATURE_NUM_GEN_BITS      8  /* 8 bits 8..15 */
+#define X86_FEATURE_GEN_WIDTH_OFF 16 /* Width of general pmu registers */
+#define FEATURE_GEN_WIDTH_BITS    8  /* 8 bits 16..23 */
+/* Register edx */
+#define X86_FEATURE_NUM_FIX_OFF   0  /* Number of fixed pmu registers */
+#define FEATURE_NUM_FIX_BITS      5  /* 5 bits 0..4 */
+#define X86_FEATURE_FIX_WIDTH_OFF 5  /* Width of fixed pmu registers */
+#define FEATURE_FIX_WIDTH_BITS    8  /* 8 bits 5..12 */
+
+/*
  * QUIRK to workaround an issue on Nehalem processors currently seen
  * on family 6 cpus E5520 (model 26) and X7542 (model 46).
  * The issue leads to endless PMC interrupt loops on the processor.
@@ -130,14 +147,18 @@ static const struct pmumsr core2_ctrls =
 };
 static int arch_pmc_cnt;
 
+/*
+ * Read the number of general counters via CPUID.EAX[0xa].EAX[8..15]
+ */
 static int core2_get_pmc_count(void)
 {
     u32 eax, ebx, ecx, edx;
 
     if ( arch_pmc_cnt == 0 )
     {
+        u32 mask = ((1 << FEATURE_NUM_GEN_BITS) - 1) << X86_FEATURE_NUM_GEN_OFF;
         cpuid(0xa, &eax, &ebx, &ecx, &edx);
-        arch_pmc_cnt = (eax & 0xff00) >> 8;
+        arch_pmc_cnt = (eax & mask) >> X86_FEATURE_NUM_GEN_OFF;
     }
 
     return arch_pmc_cnt;
@@ -153,9 +174,11 @@ static u64 core2_calc_intial_glb_ctrl_ms
 /* edx bits 5-12: Bit width of fixed-function performance counters  */
 static int core2_get_bitwidth_fix_count(void)
 {
-    u32 eax, ebx, ecx, edx;
+    u32 eax, ebx, ecx, edx, mask;
+
+    mask = ((1 << FEATURE_FIX_WIDTH_BITS) - 1) << X86_FEATURE_FIX_WIDTH_OFF;
     cpuid(0xa, &eax, &ebx, &ecx, &edx);
-    return ((edx & 0x1fe0) >> 5);
+    return ((edx & mask) >> X86_FEATURE_FIX_WIDTH_OFF);
 }
 
 static int is_core2_vpmu_msr(u32 msr_index, int *type, int *index)
@@ -731,23 +754,6 @@ struct arch_vpmu_ops core2_vpmu_ops = {
     .arch_vpmu_load = core2_vpmu_load
 };
 
-/*
- * See Intel SDM Vol 2a Instruction Set Referenc for CPUID instruction.
- * cpuid 0xa - Architectural Performance Monitoring Leaf
- * Register eax
- */
-#define X86_FEATURE_PMU_VER_OFF   0  /* Version ID */
-#define FEATURE_PMU_VER_BITS      8  /* 8 bits 0..7 */
-#define X86_FEATURE_NUM_GEN_OFF   8  /* Number of general pmu registers */
-#define FEATURE_NUM_GEN_BITS      8  /* 8 bits 8..15 */
-#define X86_FEATURE_GEN_WIDTH_OFF 16 /* Width of general pmu registers */
-#define FEATURE_GEN_WIDTH_BITS    8  /* 8 bits 16..23 */
-/* Register edx */
-#define X86_FEATURE_NUM_FIX_OFF   0  /* Number of fixed pmu registers */
-#define FEATURE_NUM_FIX_BITS      5  /* 5 bits 0..4 */
-#define X86_FEATURE_FIX_WIDTH_OFF 5  /* Width of fixed pmu registers */
-#define FEATURE_FIX_WIDTH_BITS    8  /* 8 bits 5..12 */
-
 static void core2_no_vpmu_do_cpuid(unsigned int input,
                                 unsigned int *eax, unsigned int *ebx,
                                 unsigned int *ecx, unsigned int *edx)

_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xen.org/xen-devel

#2 lore raw

Am Mittwoch 27 März 2013, 11:25:41 schrieb Konrad Rzeszutek Wilk:

Quoted 8 lines · Dietmar Hahn
Quoted 5 lines

/*
+ * See Intel SDM Vol 2a Instruction Set Referenc for CPUID instruction.
+ * cpuid 0xa - Architectural Performance Monitoring Leaf

Chapter ?

OK.

Quoted 28 lines
Quoted 4 lines

+ * Register eax
+ */

xen/arch/x86/hvm/vmx/vpmu_core2.c +1 -0
+#define X86_FEATURE_PMU_VER_OFF   0  /* Version ID */

xen/arch/x86/hvm/vmx/vpmu_core2.c line 56

Quoted 10 lines
xen/arch/x86/hvm/vmx/vpmu_core2.c +10 -0
+#define FEATURE_PMU_VER_BITS      8  /* 8 bits 0..7 */
+#define X86_FEATURE_NUM_GEN_OFF   8  /* Number of general pmu registers */
+#define FEATURE_NUM_GEN_BITS      8  /* 8 bits 8..15 */
+#define X86_FEATURE_GEN_WIDTH_OFF 16 /* Width of general pmu registers */
+#define FEATURE_GEN_WIDTH_BITS    8  /* 8 bits 16..23 */
+/* Register edx */
+#define X86_FEATURE_NUM_FIX_OFF   0  /* Number of fixed pmu registers */
+#define FEATURE_NUM_FIX_BITS      5  /* 5 bits 0..4 */
+#define X86_FEATURE_FIX_WIDTH_OFF 5  /* Width of fixed pmu registers */
+#define FEATURE_FIX_WIDTH_BITS    8  /* 8 bits 5..12 */

I think the 'X86_FEATURE' and 'FEATURE' could be just chopped off? Then it is 'PMU_VER_BITS' or 'NUM_GEN_OFF'. Perhaps also have the mask in there?

That way you can could do:

PMU_VERSION_SHIFT
PMU_VERSION_MASK

And just use those in the logic below.

And for the other:

Quoted 8 lines

PMU_GENERAL_NR_SHIFT
PMU_GENERAL_NR_MASK
and
PMU_FIXED_NR_SHIFT
PMU_FIXED_NR_MASK?

PMU_FIXED_WIDTH_SHIFT
... and so on.

Yes, this is much better. Will send another version. Thanks.

Dietmar

Signature · 6 lines
Company details: http://ts.fujitsu.com/imprint.html

_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xen.org/xen-devel