dmaengine: s3c24xx-dma: Process whole SG chain
Subsystems (2)
PATCH v2 1/2 dmaengine: s3c24xx-dma: Process whole SG chain
Due to redundant 'break' in loop driver processed only first chunk.
---
v2: No changes
drivers/dma/s3c24xx-dma.c | 1 - 1 file changed, 1 deletion(-)
drivers/dma/s3c24xx-dma.c +0 -1
@@ -961,7 +961,6 @@ static struct dma_async_tx_descriptor *s3c24xx_dma_prep_slave_sg( dsg->src_addr = slave_addr; dsg->dst_addr =sg_dma_address (sg); } -break ; }return vchan_tx_prep (&s3cchan->vc, &txd->vd, flags);
Signature · 1 line
1.9.3
PATCH v2 2/2 dmaengine: s3c24xx-dma: Add cyclic transfer support
Many audio interface drivers require support of cyclic transfers to work correctly, for example Samsung ASoC DMA driver. This patch adds support for cyclic transfers to the s3c24xx-dma driver
---
v2: make a code a bit shorter by using is_slave_direction()
drivers/dma/s3c24xx-dma.c | 112 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 111 insertions(+), 1 deletion(-)
drivers/dma/s3c24xx-dma.c +111 -1
@@ -164,6 +164,7 @@ struct s3c24xx_sg {* @disrcc: value for source control register * @didstc: value for destination control register * @dcon: base value for dcon register +* @cyclic: indicate cyclic transfer */ struct s3c24xx_txd {struct virt_dma_desc vd;
@@ -173,6 +174,7 @@ struct s3c24xx_txd {u32 disrcc;u32 didstc;u32 dcon; +bool cyclic; };struct s3c24xx_dma_chan ;
@@ -669,8 +671,10 @@ static irqreturn_t s3c24xx_dma_irq(int irq, void *data)/* when more sg's are in this txd, start the next one */ if (!list_is_last (txd->at, &txd->dsg_list)) { txd->at = txd->at->next; +if (txd->cyclic) +vchan_cyclic_callback (&txd->vd);s3c24xx_dma_start_next_sg (s3cchan, txd); - }else { + }else if (!txd->cyclic) { s3cchan->at =NULL ;vchan_cookie_complete (&txd->vd);
@@ -682,6 +686,12 @@ static irqreturn_t s3c24xx_dma_irq(int irq, void *data)s3c24xx_dma_start_next_txd (s3cchan); elses3c24xx_dma_phy_free (s3cchan ); + }else { +vchan_cyclic_callback (&txd->vd); + +/* Cyclic: reset at beginning */ + txd->at = txd->dsg_list.next; +s3c24xx_dma_start_next_sg (s3cchan, txd); } }spin_unlock (&s3cchan->vc.lock);
@@ -877,6 +887,104 @@ static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy(return vchan_tx_prep (&s3cchan->vc, &txd->vd, flags); } +static struct dma_async_tx_descriptor *s3c24xx_dma_prep_dma_cyclic ( +struct dma_chan *chan,dma_addr_t addr,size_t size,size_t period, +enum dma_transfer_direction direction,unsigned long flags, +void *context) +{ +struct s3c24xx_dma_chan *s3cchan =to_s3c24xx_dma_chan (chan); +struct s3c24xx_dma_engine *s3cdma = s3cchan->host; +const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata; +struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id]; +struct s3c24xx_txd *txd; +struct s3c24xx_sg *dsg; +unsigned sg_len; +dma_addr_t slave_addr; +u32 hwcfg =0 ; +int i; + +dev_dbg (&s3cdma->pdev->dev, +"prepare cyclic transaction of %d bytes with period %d from %s\n" , + size, period, s3cchan->name); + +if (!is_slave_direction (direction)) { +dev_err (&s3cdma->pdev->dev, +"direction %d unsupported\n" , direction); +return NULL ; + } + + txd =s3c24xx_dma_get_txd (); +if (!txd) +return NULL ; + + txd->cyclic =1 ; + +if (cdata->handshake) + txd->dcon |=S3C24XX_DCON_HANDSHAKE ; + +switch (cdata->bus) { +case S3C24XX_DMA_APB : + txd->dcon |=S3C24XX_DCON_SYNC_PCLK ; + hwcfg |=S3C24XX_DISRCC_LOC_APB ; +break ; +case S3C24XX_DMA_AHB : + txd->dcon |=S3C24XX_DCON_SYNC_HCLK ; + hwcfg |=S3C24XX_DISRCC_LOC_AHB ; +break ; + } + +/* +* Always assume our peripheral desintation is a fixed +* address in memory. +*/ + hwcfg |=S3C24XX_DISRCC_INC_FIXED ; + +/* +* Individual dma operations are requested by the slave, +* so serve only single atomic operations (S3C24XX_DCON_SERV_SINGLE). +*/ + txd->dcon |=S3C24XX_DCON_SERV_SINGLE ; + +if (direction ==DMA_MEM_TO_DEV ) { + txd->disrcc =S3C24XX_DISRCC_LOC_AHB | +S3C24XX_DISRCC_INC_INCREMENT ; + txd->didstc = hwcfg; + slave_addr = s3cchan->cfg.dst_addr; + txd->width = s3cchan->cfg.dst_addr_width; + }else { + txd->disrcc = hwcfg; + txd->didstc =S3C24XX_DIDSTC_LOC_AHB | +S3C24XX_DIDSTC_INC_INCREMENT ; + slave_addr = s3cchan->cfg.src_addr; + txd->width = s3cchan->cfg.src_addr_width; + } + + sg_len = size / period; + +for (i =0 ; i < sg_len; i++) { + dsg =kzalloc (sizeof (*dsg),GFP_NOWAIT ); +if (!dsg) { +s3c24xx_dma_free_txd (txd); +return NULL ; + } +list_add_tail (&dsg->node, &txd->dsg_list); + + dsg->len = period; +/* Check last period length */ +if (i == (sg_len -1 )) + dsg->len = size - (period * i); +if (direction ==DMA_MEM_TO_DEV ) { + dsg->src_addr = addr + (period * i); + dsg->dst_addr = slave_addr; + }else {/* DMA_DEV_TO_MEM */ + dsg->src_addr = slave_addr; + dsg->dst_addr = addr + (period * i); + } + } + +return vchan_tx_prep (&s3cchan->vc, &txd->vd, flags); +} + static struct dma_async_tx_descriptor *s3c24xx_dma_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction,
@@ -1197,6 +1305,7 @@ static int s3c24xx_dma_probe(struct platform_device *pdev)/* Initialize slave engine for SoC internal dedicated peripherals */ dma_cap_set (DMA_SLAVE , s3cdma->slave.cap_mask); +dma_cap_set (DMA_CYCLIC , s3cdma->slave.cap_mask);dma_cap_set (DMA_PRIVATE , s3cdma->slave.cap_mask); s3cdma->slave.dev = &pdev->dev; s3cdma->slave.device_alloc_chan_resources =
@@ -1206,6 +1315,7 @@ static int s3c24xx_dma_probe(struct platform_device *pdev) s3cdma->slave.device_tx_status = s3c24xx_dma_tx_status; s3cdma->slave.device_issue_pending = s3c24xx_dma_issue_pending; s3cdma->slave.device_prep_slave_sg = s3c24xx_dma_prep_slave_sg; + s3cdma->slave.device_prep_dma_cyclic = s3c24xx_dma_prep_dma_cyclic; s3cdma->slave.device_control = s3c24xx_dma_control;/* Register as many memcpy channels as there are physical channels */
Signature · 1 line
1.9.3
PATCH v2 2/2 dmaengine: s3c24xx-dma: Add cyclic transfer support
Quoted 3 lines · Vasily Khoruzhick
Many audio interface drivers require support of cyclic transfers to work correctly, for example Samsung ASoC DMA driver. This patch adds support for cyclic transfers to the s3c24xx-dma driver
Sorry, not mentioned earlier, but couple of nitpicks below. (I think you may wait for more comments and then decide what to do with mine)
Quoted 9 lines
drivers/dma/s3c24xx-dma.c +9
-0+static struct dma_async_tx_descriptor *s3c24xx_dma_prep_dma_cyclic ( +struct dma_chan *chan,dma_addr_t addr,size_t size,size_t period, +enum dma_transfer_direction direction,unsigned long flags, +void *context) +{ +struct s3c24xx_dma_chan *s3cchan =to_s3c24xx_dma_chan (chan); +struct s3c24xx_dma_engine *s3cdma = s3cchan->host; +const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata; +struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id];
drivers/dma/s3c24xx-dma.c static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy( · line 908
Quoted 10 lines
drivers/dma/s3c24xx-dma.c +10
-0+struct s3c24xx_txd *txd; +struct s3c24xx_sg *dsg; +unsigned sg_len; +dma_addr_t slave_addr; +u32 hwcfg =0 ; +int i; + +dev_dbg (&s3cdma->pdev->dev, +"prepare cyclic transaction of %d bytes with period %d from %s\n" , + size, period, s3cchan->name);
size and period are size_t, thus %zu.
...
drivers/dma/s3c24xx-dma.c static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy( · line 974
Quoted 11 lines
drivers/dma/s3c24xx-dma.c +11
-0+for (i =0 ; i < sg_len; i++) { + dsg =kzalloc (sizeof (*dsg),GFP_NOWAIT ); +if (!dsg) { +s3c24xx_dma_free_txd (txd); +return NULL ; + } +list_add_tail (&dsg->node, &txd->dsg_list); + + dsg->len = period; +/* Check last period length */ +if (i == (sg_len -1 ))
Redundant parenthesis.
drivers/dma/s3c24xx-dma.c static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy( · line 977
Quoted 3 lines
drivers/dma/s3c24xx-dma.c +3
-0+ dsg->len = size - (period * i); +if (direction ==DMA_MEM_TO_DEV ) { + dsg->src_addr = addr + (period * i);
Ditto.
drivers/dma/s3c24xx-dma.c static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy( · line 981
Quoted 4 lines
drivers/dma/s3c24xx-dma.c +4
-0+ dsg->dst_addr = slave_addr; + }else {/* DMA_DEV_TO_MEM */ + dsg->src_addr = slave_addr; + dsg->dst_addr = addr + (period * i);
Ditto.
Quoted 5 lines
drivers/dma/s3c24xx-dma.c +5
-0+ } + } + +return vchan_tx_prep (&s3cchan->vc, &txd->vd, flags); +}
Signature · 2 lines
Andy Shevchenko <[email protected]> Intel Finland Oy
PATCH v2 2/2 dmaengine: s3c24xx-dma: Add cyclic transfer support
Quoted 5 lines · Andy Shevchenko
Quoted 3 lines · Vasily Khoruzhick
Many audio interface drivers require support of cyclic transfers to work correctly, for example Samsung ASoC DMA driver. This patch adds support for cyclic transfers to the s3c24xx-dma driver
Quoted 8 lines
Sorry, not mentioned earlier, but couple of nitpicks below. (I think you may wait for more comments and then decide what to do with mine)
drivers/dma/s3c24xx-dma.c static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy( · line 908
Quoted 3 lines
drivers/dma/s3c24xx-dma.c +3
-0+dev_dbg (&s3cdma->pdev->dev, +"prepare cyclic transaction of %d bytes with period %d from %s\n" , + size, period, s3cchan->name);size and period are
size_t, thus %zu.
Ok.
Quoted 4 lines
drivers/dma/s3c24xx-dma.c static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy( · line 974
Quoted 2 lines
drivers/dma/s3c24xx-dma.c +2
-0+/* Check last period length */ +if (i == (sg_len -1 ))Redundant parenthesis.
Ok
Quoted 5 lines
drivers/dma/s3c24xx-dma.c static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy( · line 977
Quoted 3 lines
drivers/dma/s3c24xx-dma.c +3
-0+ dsg->len = size - (period * i); +if (direction ==DMA_MEM_TO_DEV ) { + dsg->src_addr = addr + (period * i);Ditto.
Ok
Quoted 6 lines
drivers/dma/s3c24xx-dma.c static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy( · line 981
Quoted 4 lines
drivers/dma/s3c24xx-dma.c +4
-0+ dsg->dst_addr = slave_addr; + }else {/* DMA_DEV_TO_MEM */ + dsg->src_addr = slave_addr; + dsg->dst_addr = addr + (period * i);Ditto.
Ok