Skip to contentSkip to conversation

Staging: rtl8192u: r8192U_wx.c removed some dead code

PATCH In review Chaitanya Hazarey 4 participants 10 messages Jun 2, 2014 – Jun 19, 2014 Staging

lore
Share & tools
lore
#0 lore raw

PATCH 1/4 Staging: rtl8192u: r8192U_wx.c removed some dead code

Removed dead code, commented out printks and DMESG.

---
 drivers/staging/rtl8192u/r8192U_wx.c | 10 ----------
 1 file changed, 10 deletions(-)
drivers/staging/rtl8192u/r8192U_wx.c +0 -10
index 675a12d..7dc2a96 100644
@@ -341,10 +341,8 @@ static int r8192_wx_set_scan(struct net_device *dev, struct iw_request_info *a,
 	if (wrqu->data.flags & IW_SCAN_THIS_ESSID) {
 		struct iw_scan_req *req = (struct iw_scan_req *)b;
 		if (req->essid_len) {
-			//printk("==**&*&*&**===>scan set ssid:%s\n", req->essid);
 			ieee->current_network.ssid_len = req->essid_len;
 			memcpy(ieee->current_network.ssid, req->essid, req->essid_len);
-			//printk("=====>network ssid:%s\n", ieee->current_network.ssid);
 		}
 	}
 
@@ -703,7 +701,6 @@ static int r8192_wx_get_retry(struct net_device *dev,
 		wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MIN;
 		wrqu->retry.value = priv->retry_data;
 	}
-	//printk("returning %d",wrqu->retry.value);
 
 
 	return 0;
@@ -730,7 +727,6 @@ static int r8192_wx_set_sens(struct net_device *dev,
 
 	short err = 0;
 	down(&priv->wx_sem);
-	//DMESG("attempt to set sensivity to %ddb",wrqu->sens.value);
 	if (priv->rf_set_sens == NULL) {
 		err = -1; /* we have not this support for this radio */
 		goto exit;
@@ -754,7 +750,6 @@ static int r8192_wx_set_enc_ext(struct net_device *dev,
 	int ret = 0;
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	struct ieee80211_device *ieee = priv->ieee80211;
-	//printk("===>%s()\n", __func__);
 
 
 	down(&priv->wx_sem);
@@ -828,7 +823,6 @@ static int r8192_wx_set_auth(struct net_device *dev,
 					union iwreq_data *data, char *extra)
 {
 	int ret = 0;
-	//printk("====>%s()\n", __func__);
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	down(&priv->wx_sem);
 	ret = ieee80211_wx_set_auth(priv->ieee80211, info, &(data->param), extra);
@@ -840,7 +834,6 @@ static int r8192_wx_set_mlme(struct net_device *dev,
 					struct iw_request_info *info,
 					union iwreq_data *wrqu, char *extra)
 {
-	//printk("====>%s()\n", __func__);
 
 	int ret = 0;
 	struct r8192_priv *priv = ieee80211_priv(dev);
@@ -855,13 +848,11 @@ static int r8192_wx_set_gen_ie(struct net_device *dev,
 					struct iw_request_info *info,
 					union iwreq_data *data, char *extra)
 {
-	   //printk("====>%s(), len:%d\n", __func__, data->length);
 	int ret = 0;
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	down(&priv->wx_sem);
 	ret = ieee80211_wx_set_gen_ie(priv->ieee80211, extra, data->data.length);
 	up(&priv->wx_sem);
-	//printk("<======%s(), ret:%d\n", __func__, ret);
 	return ret;
 
 
@@ -992,7 +983,6 @@ struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev)
 	tmp_level = (&ieee->current_network)->stats.rssi;
 	tmp_qual = (&ieee->current_network)->stats.signal;
 	tmp_noise = (&ieee->current_network)->stats.noise;
-	//printk("level:%d, qual:%d, noise:%d\n", tmp_level, tmp_qual, tmp_noise);
 
 	wstats->qual.level = tmp_level;
 	wstats->qual.qual = tmp_qual;
Signature · 1 line
1.9.1
#1 lore raw

PATCH 2/4 Staging: rtl8192u: r8192U_wx.c Removed all C99 comments

To address the error -

ERROR: do not use C99 // comments

Removed all C99 comments.

---
 drivers/staging/rtl8192u/r8192U_wx.c | 130 +++++++++++++++++------------------
 1 file changed, 65 insertions(+), 65 deletions(-)
drivers/staging/rtl8192u/r8192U_wx.c +65 -65
index 7dc2a96..b533784 100644
@@ -180,8 +180,8 @@ static int r8192_wx_set_crcmon(struct net_device *dev,
 	      priv->crcmon ? "accepted" : "rejected");
 
 	if (prev != priv->crcmon && priv->up) {
-		//rtl8180_down(dev);
-		//rtl8180_up(dev);
+		/* rtl8180_down(dev); */
+		/* rtl8180_up(dev); */
 	}
 
 	up(&priv->wx_sem);
@@ -249,15 +249,15 @@ static int rtl8180_wx_get_range(struct net_device *dev,
 	/* ~5 Mb/s real (802.11b) */
 	range->throughput = 5 * 1000 * 1000;
 
-	// TODO: Not used in 802.11b?
-//	range->min_nwid;	/* Minimal NWID we are able to set */
-	// TODO: Not used in 802.11b?
-//	range->max_nwid;	/* Maximal NWID we are able to set */
+	/* TODO: Not used in 802.11b? */
+	/* range->min_nwid; */	/* Minimal NWID we are able to set */
+	/* TODO: Not used in 802.11b? */
+	/* range->max_nwid; */	/* Maximal NWID we are able to set */
 
 	/* Old Frequency (backward compat - moved lower ) */
-//	range->old_num_channels;
-//	range->old_num_frequency;
-//	range->old_freq[6]; /* Filler to keep "version" at the same offset */
+	/* range->old_num_channels; */
+	/* range->old_num_frequency; */
+	/* range->old_freq[6]; */ /* Filler to keep "version" at the same offset */
 	if (priv->rf_set_sens != NULL)
 		range->sensitivity = priv->max_sens;	/* signal level threshold range */
 
@@ -292,26 +292,26 @@ static int rtl8180_wx_get_range(struct net_device *dev,
 	range->we_version_compiled = WIRELESS_EXT;
 	range->we_version_source = 16;
 
-//	range->retry_capa;	/* What retry options are supported */
-//	range->retry_flags;	/* How to decode max/min retry limit */
-//	range->r_time_flags;	/* How to decode max/min retry life */
-//	range->min_retry;	/* Minimal number of retries */
-//	range->max_retry;	/* Maximal number of retries */
-//	range->min_r_time;	/* Minimal retry lifetime */
-//	range->max_r_time;	/* Maximal retry lifetime */
+	/* range->retry_capa; */	/* What retry options are supported */
+	/* range->retry_flags; */	/* How to decode max/min retry limit */
+	/* range->r_time_flags; */	/* How to decode max/min retry life */
+	/* range->min_retry; */ 	/* Minimal number of retries */
+	/* range->max_retry; */		/* Maximal number of retries */
+	/* range->min_r_time; */	/* Minimal retry lifetime */
+	/* range->max_r_time; */	/* Maximal retry lifetime */
 
 
 	for (i = 0, val = 0; i < 14; i++) {
 
-		// Include only legal frequencies for some countries
+		/* Include only legal frequencies for some countries */
 		if ((GET_DOT11D_INFO(priv->ieee80211)->channel_map)[i+1]) {
 			range->freq[val].i = i + 1;
 			range->freq[val].m = ieee80211_wlan_frequencies[i] * 100000;
 			range->freq[val].e = 1;
 			val++;
 		} else {
-			// FIXME: do we need to set anything for channels
-			// we don't use ?
+			/* FIXME: do we need to set anything for channels */
+			/* we don't use ? */
 		}
 
 		if (val == IW_MAX_FREQUENCIES)
@@ -478,7 +478,7 @@ static int r8192_wx_set_wap(struct net_device *dev,
 
 	int ret;
 	struct r8192_priv *priv = ieee80211_priv(dev);
-//        struct sockaddr *temp = (struct sockaddr *)awrq;
+	/* struct sockaddr *temp = (struct sockaddr *)awrq; */
 	down(&priv->wx_sem);
 
 	ret = ieee80211_wx_set_wap(priv->ieee80211, info, awrq, extra);
@@ -517,11 +517,11 @@ static int r8192_wx_set_enc(struct net_device *dev,
 	struct ieee80211_device *ieee = priv->ieee80211;
 	int ret;
 
-	//u32 TargetContent;
+	/* u32 TargetContent; */
 	u32 hwkey[4] = {0, 0, 0, 0};
 	u8 mask = 0xff;
 	u32 key_idx = 0;
-	//u8 broadcast_addr[6] ={	0xff,0xff,0xff,0xff,0xff,0xff};
+	/* u8 broadcast_addr[6] ={	0xff,0xff,0xff,0xff,0xff,0xff}; */
 	u8 zero_addr[4][6] = {	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
 				{0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
 				{0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
@@ -540,7 +540,7 @@ static int r8192_wx_set_enc(struct net_device *dev,
 
 
 
-	//sometimes, the length is zero while we do not type key value
+	/* sometimes, the length is zero while we do not type key value */
 	if (wrqu->encoding.length != 0) {
 
 		for (i = 0; i < 4; i++) {
@@ -582,12 +582,12 @@ static int r8192_wx_set_enc(struct net_device *dev,
 			EnableHWSecurityConfig8192(dev);
 
 			setKey(dev,
-				key_idx,                //EntryNo
-				key_idx,                //KeyIndex
-				KEY_TYPE_WEP40,         //KeyType
+				key_idx,                /* EntryNo */
+				key_idx,                /* KeyIndex */
+				KEY_TYPE_WEP40,         /* KeyType */
 				zero_addr[key_idx],
-				0,                      //DefaultKey
-				hwkey);                 //KeyContent
+				0,                      /* DefaultKey */
+				hwkey);                 /* KeyContent */
 
 		}
 
@@ -596,12 +596,12 @@ static int r8192_wx_set_enc(struct net_device *dev,
 				EnableHWSecurityConfig8192(dev);
 
 			setKey(dev,
-				key_idx,                //EntryNo
-				key_idx,                //KeyIndex
-				KEY_TYPE_WEP104,        //KeyType
+				key_idx,                /* EntryNo */
+				key_idx,                /* KeyIndex */
+				KEY_TYPE_WEP104,        /* KeyType */
 				zero_addr[key_idx],
-				0,                      //DefaultKey
-				hwkey);                 //KeyContent
+				0,                      /* DefaultKey */
+				hwkey);                 /* KeyContent */
 
 		} else {
 			printk("wrong type in WEP, not WEP40 and WEP104\n");
@@ -742,7 +742,7 @@ exit:
 	return err;
 }
 
-//hw security need to reorganized.
+/* hw security need to reorganized. */
 static int r8192_wx_set_enc_ext(struct net_device *dev,
 					struct iw_request_info *info,
 					union iwreq_data *wrqu, char *extra)
@@ -763,10 +763,10 @@ static int r8192_wx_set_enc_ext(struct net_device *dev,
 		struct iw_point *encoding = &wrqu->encoding;
 		u8 idx = 0, alg = 0, group = 0;
 		if ((encoding->flags & IW_ENCODE_DISABLED) || ext->alg == IW_ENCODE_ALG_NONE)
-			//none is not allowed to use hwsec WB 2008.07.01
+			/* none is not allowed to use hwsec WB 2008.07.01 */
 			goto end_hw_sec;
 
-		// as IW_ENCODE_ALG_CCMP is defined to be 3 and KEY_TYPE_CCMP is defined to 4;
+		/* as IW_ENCODE_ALG_CCMP is defined to be 3 and KEY_TYPE_CCMP is defined to 4; */
 		alg =  (ext->alg == IW_ENCODE_ALG_CCMP)?KEY_TYPE_CCMP:ext->alg;
 		idx = encoding->flags & IW_ENCODE_INDEX;
 		if (idx)
@@ -779,34 +779,34 @@ static int r8192_wx_set_enc_ext(struct net_device *dev,
 			ieee->pairwise_key_type = alg;
 			EnableHWSecurityConfig8192(dev);
 		}
-		memcpy((u8 *)key, ext->key, 16); //we only get 16 bytes key.why? WB 2008.7.1
+		memcpy((u8 *)key, ext->key, 16); /* we only get 16 bytes key.why? WB 2008.7.1 */
 
 		if ((alg & KEY_TYPE_WEP40) && (ieee->auth_mode != 2)) {
 
 			setKey(dev,
-					idx,//EntryNo
-					idx, //KeyIndex
-					alg,  //KeyType
-					zero, //MacAddr
-					0,              //DefaultKey
-					key);           //KeyContent
+					idx,	/* EntryNao */
+					idx,	/* KeyIndex */
+					alg,	/* KeyType */
+					zero,	/* MacAddr */
+					0,	/* DefaultKey */
+					key);	/* KeyContent */
 		} else if (group) {
 			ieee->group_key_type = alg;
 			setKey(dev,
-					idx,//EntryNo
-					idx, //KeyIndex
-					alg,  //KeyType
-					broadcast_addr, //MacAddr
-					0,              //DefaultKey
-					key);           //KeyContent
-		} else {//pairwise key
+					idx,	/* EntryNo */
+					idx,	/* KeyIndex */
+					alg,	/* KeyType */
+					broadcast_addr,	/* MacAddr */
+					0,		/* DefaultKey */
+					key);		/* KeyContent */
+		} else {	/* pairwise key */
 			setKey(dev,
-					4,//EntryNo
-					idx, //KeyIndex
-					alg,  //KeyType
-					(u8 *)ieee->ap_mac_addr, //MacAddr
-					0,              //DefaultKey
-					key);           //KeyContent
+					4,	/* EntryNo */
+					idx,	/* KeyIndex */
+					alg,	/* KeyType */
+					(u8 *)ieee->ap_mac_addr,/* MacAddr */
+					0,			/* DefaultKey */
+					key);           	/* KeyContent */
 		}
 
 
@@ -914,13 +914,13 @@ static iw_handler r8192_wx_handlers[] = {
 	r8192_wx_get_power,                    /* SIOCGIWPOWER */
 	NULL,			/*---hole---*/
 	NULL,			/*---hole---*/
-	r8192_wx_set_gen_ie,//NULL,			/* SIOCSIWGENIE */
+	r8192_wx_set_gen_ie, /* NULL, */		/* SIOCSIWGENIE */
 	NULL,			/* SIOCSIWGENIE */
 
-	r8192_wx_set_auth,//NULL,			/* SIOCSIWAUTH */
-	NULL,//r8192_wx_get_auth,//NULL,			/* SIOCSIWAUTH */
+	r8192_wx_set_auth,/* NULL, */			/* SIOCSIWAUTH */
+	NULL,/* r8192_wx_get_auth, */ /* NULL, */	/* SIOCSIWAUTH */
 	r8192_wx_set_enc_ext,			/* SIOCSIWENCODEEXT */
-	NULL,//r8192_wx_get_enc_ext,//NULL,			/* SIOCSIWENCODEEXT */
+	NULL,/* r8192_wx_get_enc_ext, *//* NULL, */			/* SIOCSIWENCODEEXT */
 	NULL,			/* SIOCSIWPMKSA */
 	NULL,			 /*---hole---*/
 
@@ -953,14 +953,14 @@ static const struct iw_priv_args r8192_private_args[] = {
 
 
 static iw_handler r8192_private_handler[] = {
-//	r8192_wx_set_monitor,  /* SIOCIWFIRSTPRIV */
+	/* r8192_wx_set_monitor, */ /* SIOCIWFIRSTPRIV */
 	r8192_wx_set_crcmon,   /*SIOCIWSECONDPRIV*/
-//	r8192_wx_set_forceassociate,
-//	r8192_wx_set_beaconinterval,
-//	r8192_wx_set_monitor_type,
+	/* r8192_wx_set_forceassociate, */
+	/* r8192_wx_set_beaconinterval, */
+	/* r8192_wx_set_monitor_type, */
 	r8192_wx_set_scan_type,
 	r8192_wx_set_rawtx,
-	//r8192_wx_null,
+	/* r8192_wx_null, */
 	r8192_wx_force_reset,
 };
 
Signature · 1 line
1.9.1
#2 lore raw

Re: [PATCH 2/4] Staging: rtl8192u: r8192U_wx.c Removed all C99 comments

Hi Chaitanya,

Quoted 5 lines · Chaitanya Hazarey

To address the error -

ERROR: do not use C99 // comments

Removed all C99 comments.

IMHO, blindly converting C99 comments is a good idea...

drivers/staging/rtl8192u/r8192U_wx.c static int r8192_wx_set_crcmon(struct net_device *dev, · line 184

Quoted 10 lines
drivers/staging/rtl8192u/r8192U_wx.c +2 -2
@@ -180,8 +180,8 @@ static int r8192_wx_set_crcmon(struct net_device *dev,
              priv->crcmon ? "accepted" : "rejected");
 
        if (prev != priv->crcmon && priv->up) {
-               //rtl8180_down(dev);
-               //rtl8180_up(dev);
+               /* rtl8180_down(dev); */
+               /* rtl8180_up(dev); */

These calls were probably commented out for a reason. Keeping the "//" makes them stand out, so hopefully one day someone will look into them.

Quoted 5 lines
drivers/staging/rtl8192u/r8192U_wx.c +0 -0
        }
 
        up(&priv->wx_sem);
@@ -249,15 +249,15 @@ static int rtl8180_wx_get_range(struct net_device *dev,
        /* ~5 Mb/s real (802.11b) */

drivers/staging/rtl8192u/r8192U_wx.c static int rtl8180_wx_get_range(struct net_device *dev, · line 255

Quoted 10 lines
drivers/staging/rtl8192u/r8192U_wx.c +4 -4
        range->throughput = 5 * 1000 * 1000;
 
-       // TODO: Not used in 802.11b?
-//     range->min_nwid;        /* Minimal NWID we are able to set */
-       // TODO: Not used in 802.11b?
-//     range->max_nwid;        /* Maximal NWID we are able to set */
+       /* TODO: Not used in 802.11b? */
+       /* range->min_nwid; */  /* Minimal NWID we are able to set */
+       /* TODO: Not used in 802.11b? */
+       /* range->max_nwid; */  /* Maximal NWID we are able to set */

These are OK, the "TODO" is a good indicator.

drivers/staging/rtl8192u/r8192U_wx.c static int rtl8180_wx_get_range(struct net_device *dev, · line 260

Quoted 7 lines
drivers/staging/rtl8192u/r8192U_wx.c +3 -3
        /* Old Frequency (backward compat - moved lower ) */
-//     range->old_num_channels;
-//     range->old_num_frequency;
-//     range->old_freq[6]; /* Filler to keep "version" at the same offset */
+       /* range->old_num_channels; */
+       /* range->old_num_frequency; */
+       /* range->old_freq[6]; */ /* Filler to keep "version" at the same offset */

Please keep the "//" as an indicator.

Quoted 11 lines
drivers/staging/rtl8192u/r8192U_wx.c +0 -4
        if (priv->rf_set_sens != NULL)
                range->sensitivity = priv->max_sens;    /* signal level threshold range */
 
@@ -292,26 +292,26 @@ static int rtl8180_wx_get_range(struct net_device *dev,
        range->we_version_compiled = WIRELESS_EXT;
        range->we_version_source = 16;
 
-//     range->retry_capa;      /* What retry options are supported */
-//     range->retry_flags;     /* How to decode max/min retry limit */
-//     range->r_time_flags;    /* How to decode max/min retry life */
-//     range->min_retry;       /* Minimal number of retries */

drivers/staging/rtl8192u/r8192U_wx.c static int rtl8180_wx_get_range(struct net_device *dev, · line 301

Quoted 10 lines
drivers/staging/rtl8192u/r8192U_wx.c +7 -3
-//     range->max_retry;       /* Maximal number of retries */
-//     range->min_r_time;      /* Minimal retry lifetime */
-//     range->max_r_time;      /* Maximal retry lifetime */
+       /* range->retry_capa; */        /* What retry options are supported */
+       /* range->retry_flags; */       /* How to decode max/min retry limit */
+       /* range->r_time_flags; */      /* How to decode max/min retry life */
+       /* range->min_retry; */         /* Minimal number of retries */
+       /* range->max_retry; */         /* Maximal number of retries */
+       /* range->min_r_time; */        /* Minimal retry lifetime */
+       /* range->max_r_time; */        /* Maximal retry lifetime */

Same here.

drivers/staging/rtl8192u/r8192U_wx.c static int rtl8180_wx_get_range(struct net_device *dev, · line 306

Quoted 4 lines
drivers/staging/rtl8192u/r8192U_wx.c +1 -1
        for (i = 0, val = 0; i < 14; i++) {
 
-               // Include only legal frequencies for some countries
+               /* Include only legal frequencies for some countries */

Converting normal comments is OK.

drivers/staging/rtl8192u/r8192U_wx.c static int rtl8180_wx_get_range(struct net_device *dev,

Quoted 3 lines
drivers/staging/rtl8192u/r8192U_wx.c +0 -0
                if ((GET_DOT11D_INFO(priv->ieee80211)->channel_map)[i+1]) {
                        range->freq[val].i = i + 1;
                        range->freq[val].m = ieee80211_wlan_frequencies[i] * 100

What do other people think?

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

#3 lore raw

Re: [PATCH 2/4] Staging: rtl8192u: r8192U_wx.c Removed all C99 comments

Quoted 1 line · Geert Uytterhoeven

What do other people think?

In staging we just automatically delete commented code. It's in the git log if you need it. It always feels much better after the dead code is gone.

regards,
dan carpenter

#4 lore raw

Re: [PATCH 2/4] Staging: rtl8192u: r8192U_wx.c Removed all C99 comments

Quoted 1 line · Dan Carpenter

It always feels much better after the dead code is gone.

So patches are still good ? No change required for my side, right ? I just need to wait for Greg's needle to come to this point and pick them up.

Best,

Chaitanya

maintainer
#5 lore raw

Re: [PATCH 2/4] Staging: rtl8192u: r8192U_wx.c Removed all C99 comments

Quoted 6 lines · Chaitanya Hazarey
Quoted 1 line · Dan Carpenter

It always feels much better after the dead code is gone.

So patches are still good ? No change required for my side, right ? I just need to wait for Greg's needle to come to this point and pick them up.

That will be a few weeks, as the merge window is open so I can't take anything in my tree until 3.16-rc1 is out. So keep working on things, these aren't lost, I'll get to them in a few weeks.

thanks,

greg k-h

#6 lore raw

Re: [PATCH 2/4] Staging: rtl8192u: r8192U_wx.c Removed all C99 comments

Quoted 3 lines · Greg KH

So keep working on things,
these aren't lost, I'll get to them in a few weeks.

Ok will do,

Chaitanya

#7 lore raw

PATCH 3/4 Staging: rtl8192u: r8192U_wx.c Added a single space for code-style issue

In reply to Chaitanya Hazarey

Added a space around '|' to address:

ERROR: need consistent spacing around '|' (ctx:VxW)

---
 drivers/staging/rtl8192u/r8192U_wx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/rtl8192u/r8192U_wx.c +1 -1
index b533784..09b1e81 100644
@@ -987,7 +987,7 @@ struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev)
 	wstats->qual.level = tmp_level;
 	wstats->qual.qual = tmp_qual;
 	wstats->qual.noise = tmp_noise;
-	wstats->qual.updated = IW_QUAL_ALL_UPDATED| IW_QUAL_DBM;
+	wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
 	return wstats;
 }
 
Signature · 1 line
1.9.1
#8 lore raw

PATCH 4/4 Staging: rtl8192u: r8192U_wx.c Removed some more commented out dead code

In reply to Chaitanya Hazarey

Removed dead code from the file.

---
 drivers/staging/rtl8192u/r8192U_wx.c | 18 +-----------------
 1 file changed, 1 insertion(+), 17 deletions(-)
drivers/staging/rtl8192u/r8192U_wx.c +1 -17
index 09b1e81..ceb06d8 100644
@@ -516,12 +516,9 @@ static int r8192_wx_set_enc(struct net_device *dev,
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	struct ieee80211_device *ieee = priv->ieee80211;
 	int ret;
-
-	/* u32 TargetContent; */
 	u32 hwkey[4] = {0, 0, 0, 0};
 	u8 mask = 0xff;
 	u32 key_idx = 0;
-	/* u8 broadcast_addr[6] ={	0xff,0xff,0xff,0xff,0xff,0xff}; */
 	u8 zero_addr[4][6] = {	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
 				{0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
 				{0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
@@ -667,14 +664,6 @@ static int r8192_wx_set_retry(struct net_device *dev,
 	 */
 
 	rtl8192_commit(dev);
-	/*
-	if(priv->up){
-		rtl8180_rtx_disable(dev);
-		rtl8180_rx_enable(dev);
-		rtl8180_tx_enable(dev);
-
-	}
-	*/
 exit:
 	up(&priv->wx_sem);
 
@@ -953,14 +942,9 @@ static const struct iw_priv_args r8192_private_args[] = {
 
 
 static iw_handler r8192_private_handler[] = {
-	/* r8192_wx_set_monitor, */ /* SIOCIWFIRSTPRIV */
-	r8192_wx_set_crcmon,   /*SIOCIWSECONDPRIV*/
-	/* r8192_wx_set_forceassociate, */
-	/* r8192_wx_set_beaconinterval, */
-	/* r8192_wx_set_monitor_type, */
+	r8192_wx_set_crcmon, 
 	r8192_wx_set_scan_type,
 	r8192_wx_set_rawtx,
-	/* r8192_wx_null, */
 	r8192_wx_force_reset,
 };
 
Signature · 1 line
1.9.1