Skip to contentSkip to conversation

mfd: Intel SoC Power Management IC

PATCH Applied Zhu, Lejun 4 participants 14 messages Jun 3, 2014 – Jul 7, 2014

Subsystems (4)
lore
Share & tools
lore

Zhu, Lejun

author
#0 lore raw

v5 cover mfd: Intel SoC Power Management IC

Devices based on Intel SoC products such as Baytrail have a Power Management IC. In the PMIC there are subsystems for voltage regulation, A/D conversion, GPIO and PWMs. The PMIC in Baytrail-T platform is called Crystal Cove.

This series contains common code for these PMICs, and device specific support for Crystal Cove.

v2:
- Use regmap instead of creating our own I2C read/write callbacks.
- Add one missing EXPORT_SYMBOL.
- Remove some duplicate code and put them into pmic_regmap_load_from_hw. v3:
- Use regmap-irq and remove lots of duplicate code.
- Remove 2 unused APIs.
- Some other cleanup.
v4:
- Remove all exported APIs which are wrappers of regmap API, export the regmap in data structure instead.
- Combine intel_soc_pmic_core.c and intel_soc_pmic_i2c.c
- Clean up include files.
- Remove useless members of struct intel_soc_pmic_config.
- Fix various coding style issues.
v5:
- Add comment to describe what is done in _find_gpio_irq().
- Remove i2c id. Only keep ACPI id and match it in _probe().
- Further fix of coding style issues.
- Add the GPIO patch, to merge it along with the MFD changes.

Zhu, Lejun (3):
mfd: intel_soc_pmic: Core driver
mfd: intel_soc_pmic: Crystal Cove support
gpio: Add support for Intel Crystal Cove PMIC

 drivers/gpio/Kconfig               |  13 ++
 drivers/gpio/Makefile              |   1 +
 drivers/gpio/gpio-crystalcove.c    | 379 +++++++++++++++++++++++++++++++++++++
 drivers/mfd/Kconfig                |  12 ++
 drivers/mfd/Makefile               |   3 +
 drivers/mfd/intel_soc_pmic_core.c  | 168 ++++++++++++++++
 drivers/mfd/intel_soc_pmic_core.h  |  32 ++++
 drivers/mfd/intel_soc_pmic_crc.c   | 158 ++++++++++++++++
 include/linux/mfd/intel_soc_pmic.h |  30 +++
 9 files changed, 796 insertions(+)
 create mode 100644 drivers/gpio/gpio-crystalcove.c
 create mode 100644 drivers/mfd/intel_soc_pmic_core.c
 create mode 100644 drivers/mfd/intel_soc_pmic_core.h
 create mode 100644 drivers/mfd/intel_soc_pmic_crc.c
 create mode 100644 include/linux/mfd/intel_soc_pmic.h
Signature · 1 line
1.8.3.2
author
#1 lore raw

PATCH v5 1/3 mfd: intel_soc_pmic: Core driver

This patch provides the common I2C driver code for Intel SoC PMICs.

---
v2:
- Use regmap instead of creating our own I2C read/write callbacks.
- Add one missing EXPORT_SYMBOL.
- Remove duplicate code and put them into pmic_regmap_load_from_hw. v3:
- Use regmap-irq. Remove our own pmic_regmap_* and IRQ handling code.
- Remove intel_soc_pmic_dev() and intel_soc_pmic_set_pdata().
- Use EXPORT_SYMBOL_GPL for exposed APIs.
- Use gpiod interface instead of gpio numbers.
- Remove redundant I2C IDs.
- Use managed allocations.
v4:
- Remove all exported APIs which are wrappers of regmap API, export the regmap in data structure instead.
- Combine I2C and core .c files.
- Clean up include files.
- Use intel_soc_pmic_ prefix to replace pmic_ and intel_pmic_.
- Fix various coding style issues.
v5:
- Add comment to describe what is done in _find_gpio_irq().
- Remove i2c id. Only keep ACPI id and match it in _probe().
- Further fix of coding style issues.

---
 drivers/mfd/intel_soc_pmic_core.c  | 168 +++++++++++++++++++++++++++++++++++++
 drivers/mfd/intel_soc_pmic_core.h  |  32 +++++++
 include/linux/mfd/intel_soc_pmic.h |  30 +++++++
 3 files changed, 230 insertions(+)
 create mode 100644 drivers/mfd/intel_soc_pmic_core.c
 create mode 100644 drivers/mfd/intel_soc_pmic_core.h
 create mode 100644 include/linux/mfd/intel_soc_pmic.h
drivers/mfd/intel_soc_pmic_core.c new file +168 -0
new file mode 100644
index 0000000..7638b34
@@ -0,0 +1,168 @@
+/*
+ * intel_soc_pmic_core.c - Intel SoC PMIC MFD Driver
+ *
+ * Copyright (C) 2013, 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Author: Yang, Bin <[email protected]>
+ * Author: Zhu, Lejun <[email protected]>
+ */
+
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/gpio/consumer.h>
+#include <linux/acpi.h>
+#include <linux/regmap.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include "intel_soc_pmic_core.h"
+
+/*
+ * On some boards the PMIC interrupt may come from a GPIO line.
+ * Try to lookup the ACPI table and see if such connection exists. If not,
+ * return -ENOENT and use the IRQ provided by I2C.
+ */
+static int intel_soc_pmic_find_gpio_irq(struct device *dev)
+{
+	struct gpio_desc *desc;
+	int irq;
+
+	desc = devm_gpiod_get_index(dev, "intel_soc_pmic", 0);
+	if (IS_ERR(desc))
+		return -ENOENT;
+
+	irq = gpiod_to_irq(desc);
+	if (irq < 0)
+		dev_warn(dev, "Can't get irq: %d\n", irq);
+
+	return irq;
+}
+
+static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
+				    const struct i2c_device_id *i2c_id)
+{
+	struct device *dev = &i2c->dev;
+	const struct acpi_device_id *id;
+	struct intel_soc_pmic_config *config;
+	struct intel_soc_pmic *pmic;
+	int ret;
+	int irq;
+
+	id = acpi_match_device(dev->driver->acpi_match_table, dev);
+	if (!id || !id->driver_data)
+		return -ENODEV;
+
+	config = (struct intel_soc_pmic_config *)id->driver_data;
+
+	pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
+	dev_set_drvdata(dev, pmic);
+
+	pmic->regmap = devm_regmap_init_i2c(i2c, config->regmap_config);
+
+	irq = intel_soc_pmic_find_gpio_irq(dev);
+	pmic->irq = (irq < 0) ? i2c->irq : irq;
+
+	ret = regmap_add_irq_chip(pmic->regmap, pmic->irq,
+				  config->irq_flags | IRQF_ONESHOT,
+				  0, config->irq_chip,
+				  &pmic->irq_chip_data);
+	if (ret)
+		return ret;
+
+	ret = enable_irq_wake(pmic->irq);
+	if (ret)
+		dev_warn(dev, "Can't enable IRQ as wake source: %d\n", ret);
+
+	ret = mfd_add_devices(dev, -1, config->cell_dev,
+			      config->n_cell_devs, NULL, 0,
+			      regmap_irq_get_domain(pmic->irq_chip_data));
+	if (ret)
+		goto err_del_irq_chip;
+
+	return 0;
+
+err_del_irq_chip:
+	regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data);
+	return ret;
+}
+
+static int intel_soc_pmic_i2c_remove(struct i2c_client *i2c)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(&i2c->dev);
+
+	regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data);
+
+	mfd_remove_devices(&i2c->dev);
+
+	return 0;
+}
+
+static void intel_soc_pmic_shutdown(struct i2c_client *i2c)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(&i2c->dev);
+
+	disable_irq(pmic->irq);
+
+	return;
+}
+
+static int intel_soc_pmic_suspend(struct device *dev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
+
+	disable_irq(pmic->irq);
+
+	return 0;
+}
+
+static int intel_soc_pmic_resume(struct device *dev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
+
+	enable_irq(pmic->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(intel_soc_pmic_pm_ops, intel_soc_pmic_suspend,
+			 intel_soc_pmic_resume);
+
+static const struct i2c_device_id intel_soc_pmic_i2c_id[] = {
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, intel_soc_pmic_i2c_id);
+
+static struct acpi_device_id intel_soc_pmic_acpi_match[] = {
+	{"INT33FD", (kernel_ulong_t)&intel_soc_pmic_config_crc},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, intel_soc_pmic_acpi_match);
+
+static struct i2c_driver intel_soc_pmic_i2c_driver = {
+	.driver = {
+		.name = "intel_soc_pmic_i2c",
+		.owner = THIS_MODULE,
+		.pm = &intel_soc_pmic_pm_ops,
+		.acpi_match_table = ACPI_PTR(intel_soc_pmic_acpi_match),
+	},
+	.probe = intel_soc_pmic_i2c_probe,
+	.remove = intel_soc_pmic_i2c_remove,
+	.id_table = intel_soc_pmic_i2c_id,
+	.shutdown = intel_soc_pmic_shutdown,
+};
+
+module_i2c_driver(intel_soc_pmic_i2c_driver);
+
+MODULE_DESCRIPTION("I2C driver for Intel SoC PMIC");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Yang, Bin <[email protected]>");
+MODULE_AUTHOR("Zhu, Lejun <[email protected]>");
drivers/mfd/intel_soc_pmic_core.h new file +32 -0
new file mode 100644
index 0000000..33aacd9
@@ -0,0 +1,32 @@
+/*
+ * intel_soc_pmic_core.h - Intel SoC PMIC MFD Driver
+ *
+ * Copyright (C) 2012-2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Author: Yang, Bin <[email protected]>
+ * Author: Zhu, Lejun <[email protected]>
+ */
+
+#ifndef __INTEL_SOC_PMIC_CORE_H__
+#define __INTEL_SOC_PMIC_CORE_H__
+
+struct intel_soc_pmic_config {
+	unsigned long irq_flags;
+	struct mfd_cell *cell_dev;
+	int n_cell_devs;
+	struct regmap_config *regmap_config;
+	struct regmap_irq_chip *irq_chip;
+};
+
+extern struct intel_soc_pmic_config intel_soc_pmic_config_crc;
+
+#endif	/* __INTEL_SOC_PMIC_CORE_H__ */
include/linux/mfd/intel_soc_pmic.h new file +30 -0
new file mode 100644
index 0000000..abcbfcf
@@ -0,0 +1,30 @@
+/*
+ * intel_soc_pmic.h - Intel SoC PMIC Driver
+ *
+ * Copyright (C) 2012-2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Author: Yang, Bin <[email protected]>
+ * Author: Zhu, Lejun <[email protected]>
+ */
+
+#ifndef __INTEL_SOC_PMIC_H__
+#define __INTEL_SOC_PMIC_H__
+
+#include <linux/regmap.h>
+
+struct intel_soc_pmic {
+	int irq;
+	struct regmap *regmap;
+	struct regmap_irq_chip_data *irq_chip_data;
+};
+
+#endif	/* __INTEL_SOC_PMIC_H__ */
Signature · 1 line
1.8.3.2
Acked-by on v5 1/3
#2 lore raw

Re: [PATCH v5 1/3] mfd: intel_soc_pmic: Core driver

Quoted 27 lines

This patch provides the common I2C driver code for Intel SoC PMICs.

---
v2:
- Use regmap instead of creating our own I2C read/write callbacks.
- Add one missing EXPORT_SYMBOL.
- Remove duplicate code and put them into pmic_regmap_load_from_hw. v3:
- Use regmap-irq. Remove our own pmic_regmap_* and IRQ handling code.
- Remove intel_soc_pmic_dev() and intel_soc_pmic_set_pdata().
- Use EXPORT_SYMBOL_GPL for exposed APIs.
- Use gpiod interface instead of gpio numbers.
- Remove redundant I2C IDs.
- Use managed allocations.
v4:
- Remove all exported APIs which are wrappers of regmap API, export the regmap in data structure instead.
- Combine I2C and core .c files.
- Clean up include files.
- Use intel_soc_pmic_ prefix to replace pmic_ and intel_pmic_.
- Fix various coding style issues.
v5:
- Add comment to describe what is done in _find_gpio_irq().
- Remove i2c id. Only keep ACPI id and match it in _probe().
- Further fix of coding style issues.

Quoted 8 lines
---
 drivers/mfd/intel_soc_pmic_core.c  | 168 +++++++++++++++++++++++++++++++++++++
 drivers/mfd/intel_soc_pmic_core.h  |  32 +++++++
 include/linux/mfd/intel_soc_pmic.h |  30 +++++++
 3 files changed, 230 insertions(+)
 create mode 100644 drivers/mfd/intel_soc_pmic_core.c
 create mode 100644 drivers/mfd/intel_soc_pmic_core.h
 create mode 100644 include/linux/mfd/intel_soc_pmic.h

Looks good to me now, but the merge window is immenent. If there are no more comments in 2 weeks time I will apply for v3.17.

Signature · 4 lines
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Applied
#4 lore raw

Re: [PATCH v5 1/3] mfd: intel_soc_pmic: Core driver

In reply to Zhu, Lejun
Quoted 27 lines

This patch provides the common I2C driver code for Intel SoC PMICs.

---
v2:
- Use regmap instead of creating our own I2C read/write callbacks.
- Add one missing EXPORT_SYMBOL.
- Remove duplicate code and put them into pmic_regmap_load_from_hw. v3:
- Use regmap-irq. Remove our own pmic_regmap_* and IRQ handling code.
- Remove intel_soc_pmic_dev() and intel_soc_pmic_set_pdata().
- Use EXPORT_SYMBOL_GPL for exposed APIs.
- Use gpiod interface instead of gpio numbers.
- Remove redundant I2C IDs.
- Use managed allocations.
v4:
- Remove all exported APIs which are wrappers of regmap API, export the regmap in data structure instead.
- Combine I2C and core .c files.
- Clean up include files.
- Use intel_soc_pmic_ prefix to replace pmic_ and intel_pmic_.
- Fix various coding style issues.
v5:
- Add comment to describe what is done in _find_gpio_irq().
- Remove i2c id. Only keep ACPI id and match it in _probe().
- Further fix of coding style issues.

Quoted 8 lines
---
 drivers/mfd/intel_soc_pmic_core.c  | 168 +++++++++++++++++++++++++++++++++++++
 drivers/mfd/intel_soc_pmic_core.h  |  32 +++++++
 include/linux/mfd/intel_soc_pmic.h |  30 +++++++
 3 files changed, 230 insertions(+)
 create mode 100644 drivers/mfd/intel_soc_pmic_core.c
 create mode 100644 drivers/mfd/intel_soc_pmic_core.h
 create mode 100644 include/linux/mfd/intel_soc_pmic.h

Applied, thanks.

Quoted 248 lines
drivers/mfd/intel_soc_pmic_core.c new file +168 -0
new file mode 100644
index 0000000..7638b34
@@ -0,0 +1,168 @@
+/*
+ * intel_soc_pmic_core.c - Intel SoC PMIC MFD Driver
+ *
+ * Copyright (C) 2013, 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Author: Yang, Bin <[email protected]>
+ * Author: Zhu, Lejun <[email protected]>
+ */
+
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/gpio/consumer.h>
+#include <linux/acpi.h>
+#include <linux/regmap.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include "intel_soc_pmic_core.h"
+
+/*
+ * On some boards the PMIC interrupt may come from a GPIO line.
+ * Try to lookup the ACPI table and see if such connection exists. If not,
+ * return -ENOENT and use the IRQ provided by I2C.
+ */
+static int intel_soc_pmic_find_gpio_irq(struct device *dev)
+{
+	struct gpio_desc *desc;
+	int irq;
+
+	desc = devm_gpiod_get_index(dev, "intel_soc_pmic", 0);
+	if (IS_ERR(desc))
+		return -ENOENT;
+
+	irq = gpiod_to_irq(desc);
+	if (irq < 0)
+		dev_warn(dev, "Can't get irq: %d\n", irq);
+
+	return irq;
+}
+
+static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
+				    const struct i2c_device_id *i2c_id)
+{
+	struct device *dev = &i2c->dev;
+	const struct acpi_device_id *id;
+	struct intel_soc_pmic_config *config;
+	struct intel_soc_pmic *pmic;
+	int ret;
+	int irq;
+
+	id = acpi_match_device(dev->driver->acpi_match_table, dev);
+	if (!id || !id->driver_data)
+		return -ENODEV;
+
+	config = (struct intel_soc_pmic_config *)id->driver_data;
+
+	pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
+	dev_set_drvdata(dev, pmic);
+
+	pmic->regmap = devm_regmap_init_i2c(i2c, config->regmap_config);
+
+	irq = intel_soc_pmic_find_gpio_irq(dev);
+	pmic->irq = (irq < 0) ? i2c->irq : irq;
+
+	ret = regmap_add_irq_chip(pmic->regmap, pmic->irq,
+				  config->irq_flags | IRQF_ONESHOT,
+				  0, config->irq_chip,
+				  &pmic->irq_chip_data);
+	if (ret)
+		return ret;
+
+	ret = enable_irq_wake(pmic->irq);
+	if (ret)
+		dev_warn(dev, "Can't enable IRQ as wake source: %d\n", ret);
+
+	ret = mfd_add_devices(dev, -1, config->cell_dev,
+			      config->n_cell_devs, NULL, 0,
+			      regmap_irq_get_domain(pmic->irq_chip_data));
+	if (ret)
+		goto err_del_irq_chip;
+
+	return 0;
+
+err_del_irq_chip:
+	regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data);
+	return ret;
+}
+
+static int intel_soc_pmic_i2c_remove(struct i2c_client *i2c)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(&i2c->dev);
+
+	regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data);
+
+	mfd_remove_devices(&i2c->dev);
+
+	return 0;
+}
+
+static void intel_soc_pmic_shutdown(struct i2c_client *i2c)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(&i2c->dev);
+
+	disable_irq(pmic->irq);
+
+	return;
+}
+
+static int intel_soc_pmic_suspend(struct device *dev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
+
+	disable_irq(pmic->irq);
+
+	return 0;
+}
+
+static int intel_soc_pmic_resume(struct device *dev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
+
+	enable_irq(pmic->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(intel_soc_pmic_pm_ops, intel_soc_pmic_suspend,
+			 intel_soc_pmic_resume);
+
+static const struct i2c_device_id intel_soc_pmic_i2c_id[] = {
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, intel_soc_pmic_i2c_id);
+
+static struct acpi_device_id intel_soc_pmic_acpi_match[] = {
+	{"INT33FD", (kernel_ulong_t)&intel_soc_pmic_config_crc},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, intel_soc_pmic_acpi_match);
+
+static struct i2c_driver intel_soc_pmic_i2c_driver = {
+	.driver = {
+		.name = "intel_soc_pmic_i2c",
+		.owner = THIS_MODULE,
+		.pm = &intel_soc_pmic_pm_ops,
+		.acpi_match_table = ACPI_PTR(intel_soc_pmic_acpi_match),
+	},
+	.probe = intel_soc_pmic_i2c_probe,
+	.remove = intel_soc_pmic_i2c_remove,
+	.id_table = intel_soc_pmic_i2c_id,
+	.shutdown = intel_soc_pmic_shutdown,
+};
+
+module_i2c_driver(intel_soc_pmic_i2c_driver);
+
+MODULE_DESCRIPTION("I2C driver for Intel SoC PMIC");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Yang, Bin <[email protected]>");
+MODULE_AUTHOR("Zhu, Lejun <[email protected]>");
drivers/mfd/intel_soc_pmic_core.h new file +32 -0
new file mode 100644
index 0000000..33aacd9
@@ -0,0 +1,32 @@
+/*
+ * intel_soc_pmic_core.h - Intel SoC PMIC MFD Driver
+ *
+ * Copyright (C) 2012-2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Author: Yang, Bin <[email protected]>
+ * Author: Zhu, Lejun <[email protected]>
+ */
+
+#ifndef __INTEL_SOC_PMIC_CORE_H__
+#define __INTEL_SOC_PMIC_CORE_H__
+
+struct intel_soc_pmic_config {
+	unsigned long irq_flags;
+	struct mfd_cell *cell_dev;
+	int n_cell_devs;
+	struct regmap_config *regmap_config;
+	struct regmap_irq_chip *irq_chip;
+};
+
+extern struct intel_soc_pmic_config intel_soc_pmic_config_crc;
+
+#endif	/* __INTEL_SOC_PMIC_CORE_H__ */
include/linux/mfd/intel_soc_pmic.h new file +30 -0
new file mode 100644
index 0000000..abcbfcf
@@ -0,0 +1,30 @@
+/*
+ * intel_soc_pmic.h - Intel SoC PMIC Driver
+ *
+ * Copyright (C) 2012-2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Author: Yang, Bin <[email protected]>
+ * Author: Zhu, Lejun <[email protected]>
+ */
+
+#ifndef __INTEL_SOC_PMIC_H__
+#define __INTEL_SOC_PMIC_H__
+
+#include <linux/regmap.h>
+
+struct intel_soc_pmic {
+	int irq;
+	struct regmap *regmap;
+	struct regmap_irq_chip_data *irq_chip_data;
+};
+
+#endif	/* __INTEL_SOC_PMIC_H__ */
Signature · 4 lines
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
author
#5 lore raw

PATCH v5 2/3 mfd: intel_soc_pmic: Crystal Cove support

In reply to Zhu, Lejun

This patch provides chip-specific support for Crystal Cove. Crystal Cove is the PMIC in Baytrail-T platform.

Also adds Intel SoC PMIC support to the build files.

---
v2:
- Add regmap_config for Crystal Cove.
v3:
- Convert IRQ config to regmap_irq_chip.
v4:
- Cleanup include files.
- Remove useless init() function.
- Remove useless .label and .init from struct intel_soc_pmic_config.
- Fix various coding style issues.
v5:
- Use CRYSTAL_COVE_IRQ_ prefix for IRQ bits definition.
- Merge build files patch to here.

---
 drivers/mfd/Kconfig              |  12 +++
 drivers/mfd/Makefile             |   3 +
 drivers/mfd/intel_soc_pmic_crc.c | 158 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 173 insertions(+)
 create mode 100644 drivers/mfd/intel_soc_pmic_crc.c
drivers/mfd/Kconfig +12 -0
index 3383412..d987b71 100644
@@ -241,6 +241,18 @@ config LPC_SCH
 	  LPC bridge function of the Intel SCH provides support for
 	  System Management Bus and General Purpose I/O.
 
+config INTEL_SOC_PMIC
+	bool "Support for Intel Atom SoC PMIC"
+	depends on I2C=y
+	select MFD_CORE
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	help
+	  Select this option to enable support for the PMIC device
+	  on some Intel SoC systems. The PMIC provides ADC, GPIO,
+	  thermal, charger and related power management functions
+	  on these systems.
+
 config MFD_INTEL_MSIC
 	bool "Intel MSIC"
 	depends on INTEL_SCU_IPC
drivers/mfd/Makefile +3 -0
index 2851275..36dda4c 100644
@@ -166,3 +166,6 @@ obj-$(CONFIG_MFD_RETU)		+= retu-mfd.o
 obj-$(CONFIG_MFD_AS3711)	+= as3711.o
 obj-$(CONFIG_MFD_AS3722)	+= as3722.o
 obj-$(CONFIG_MFD_STW481X)	+= stw481x.o
+
+intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
+obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
drivers/mfd/intel_soc_pmic_crc.c new file +158 -0

158 lines not on this page · raw message

Signature · 1 line
1.8.3.2
Acked-by on v5 2/3
#6 lore raw

Re: [PATCH v5 2/3] mfd: intel_soc_pmic: Crystal Cove support

Quoted 20 lines · Lejun

This patch provides chip-specific support for Crystal Cove. Crystal Cove is the PMIC in Baytrail-T platform.

Also adds Intel SoC PMIC support to the build files.

---
v2:
- Add regmap_config for Crystal Cove.
v3:
- Convert IRQ config to regmap_irq_chip.
v4:
- Cleanup include files.
- Remove useless init() function.
- Remove useless .label and .init from struct intel_soc_pmic_config.
- Fix various coding style issues.
v5:
- Use CRYSTAL_COVE_IRQ_ prefix for IRQ bits definition.
- Merge build files patch to here.

Quoted 6 lines
---
 drivers/mfd/Kconfig              |  12 +++
 drivers/mfd/Makefile             |   3 +
 drivers/mfd/intel_soc_pmic_crc.c | 158 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 173 insertions(+)
 create mode 100644 drivers/mfd/intel_soc_pmic_crc.c

Looks good to me now, but the merge-window is imminent. I'll apply this for v3.17 if there are no more comments.

Signature · 4 lines
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Applied
#8 lore raw

Re: [PATCH v5 2/3] mfd: intel_soc_pmic: Crystal Cove support

In reply to Zhu, Lejun
Quoted 20 lines · Lejun

This patch provides chip-specific support for Crystal Cove. Crystal Cove is the PMIC in Baytrail-T platform.

Also adds Intel SoC PMIC support to the build files.

---
v2:
- Add regmap_config for Crystal Cove.
v3:
- Convert IRQ config to regmap_irq_chip.
v4:
- Cleanup include files.
- Remove useless init() function.
- Remove useless .label and .init from struct intel_soc_pmic_config.
- Fix various coding style issues.
v5:
- Use CRYSTAL_COVE_IRQ_ prefix for IRQ bits definition.
- Merge build files patch to here.

Quoted 6 lines
---
 drivers/mfd/Kconfig              |  12 +++
 drivers/mfd/Makefile             |   3 +
 drivers/mfd/intel_soc_pmic_crc.c | 158 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 173 insertions(+)
 create mode 100644 drivers/mfd/intel_soc_pmic_crc.c

Applied, thanks.

Quoted 198 lines
drivers/mfd/Kconfig +12 -0
index 3383412..d987b71 100644
@@ -241,6 +241,18 @@ config LPC_SCH
 	  LPC bridge function of the Intel SCH provides support for
 	  System Management Bus and General Purpose I/O.
 
+config INTEL_SOC_PMIC
+	bool "Support for Intel Atom SoC PMIC"
+	depends on I2C=y
+	select MFD_CORE
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	help
+	  Select this option to enable support for the PMIC device
+	  on some Intel SoC systems. The PMIC provides ADC, GPIO,
+	  thermal, charger and related power management functions
+	  on these systems.
+
 config MFD_INTEL_MSIC
 	bool "Intel MSIC"
 	depends on INTEL_SCU_IPC
drivers/mfd/Makefile +3 -0
index 2851275..36dda4c 100644
@@ -166,3 +166,6 @@ obj-$(CONFIG_MFD_RETU)		+= retu-mfd.o
 obj-$(CONFIG_MFD_AS3711)	+= as3711.o
 obj-$(CONFIG_MFD_AS3722)	+= as3722.o
 obj-$(CONFIG_MFD_STW481X)	+= stw481x.o
+
+intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
+obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
drivers/mfd/intel_soc_pmic_crc.c new file +158 -0
new file mode 100644
index 0000000..7107cab
@@ -0,0 +1,158 @@
+/*
+ * intel_soc_pmic_crc.c - Device access for Crystal Cove PMIC
+ *
+ * Copyright (C) 2013, 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Author: Yang, Bin <[email protected]>
+ * Author: Zhu, Lejun <[email protected]>
+ */
+
+#include <linux/mfd/core.h>
+#include <linux/interrupt.h>
+#include <linux/regmap.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include "intel_soc_pmic_core.h"
+
+#define CRYSTAL_COVE_MAX_REGISTER	0xC6
+
+#define CRYSTAL_COVE_REG_IRQLVL1	0x02
+#define CRYSTAL_COVE_REG_MIRQLVL1	0x0E
+
+#define CRYSTAL_COVE_IRQ_PWRSRC		0
+#define CRYSTAL_COVE_IRQ_THRM		1
+#define CRYSTAL_COVE_IRQ_BCU		2
+#define CRYSTAL_COVE_IRQ_ADC		3
+#define CRYSTAL_COVE_IRQ_CHGR		4
+#define CRYSTAL_COVE_IRQ_GPIO		5
+#define CRYSTAL_COVE_IRQ_VHDMIOCP	6
+
+static struct resource gpio_resources[] = {
+	{
+		.name	= "GPIO",
+		.start	= CRYSTAL_COVE_IRQ_GPIO,
+		.end	= CRYSTAL_COVE_IRQ_GPIO,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource pwrsrc_resources[] = {
+	{
+		.name  = "PWRSRC",
+		.start = CRYSTAL_COVE_IRQ_PWRSRC,
+		.end   = CRYSTAL_COVE_IRQ_PWRSRC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource adc_resources[] = {
+	{
+		.name  = "ADC",
+		.start = CRYSTAL_COVE_IRQ_ADC,
+		.end   = CRYSTAL_COVE_IRQ_ADC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource thermal_resources[] = {
+	{
+		.name  = "THERMAL",
+		.start = CRYSTAL_COVE_IRQ_THRM,
+		.end   = CRYSTAL_COVE_IRQ_THRM,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource bcu_resources[] = {
+	{
+		.name  = "BCU",
+		.start = CRYSTAL_COVE_IRQ_BCU,
+		.end   = CRYSTAL_COVE_IRQ_BCU,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell crystal_cove_dev[] = {
+	{
+		.name = "crystal_cove_pwrsrc",
+		.num_resources = ARRAY_SIZE(pwrsrc_resources),
+		.resources = pwrsrc_resources,
+	},
+	{
+		.name = "crystal_cove_adc",
+		.num_resources = ARRAY_SIZE(adc_resources),
+		.resources = adc_resources,
+	},
+	{
+		.name = "crystal_cove_thermal",
+		.num_resources = ARRAY_SIZE(thermal_resources),
+		.resources = thermal_resources,
+	},
+	{
+		.name = "crystal_cove_bcu",
+		.num_resources = ARRAY_SIZE(bcu_resources),
+		.resources = bcu_resources,
+	},
+	{
+		.name = "crystal_cove_gpio",
+		.num_resources = ARRAY_SIZE(gpio_resources),
+		.resources = gpio_resources,
+	},
+};
+
+static struct regmap_config crystal_cove_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = CRYSTAL_COVE_MAX_REGISTER,
+	.cache_type = REGCACHE_NONE,
+};
+
+static const struct regmap_irq crystal_cove_irqs[] = {
+	[CRYSTAL_COVE_IRQ_PWRSRC] = {
+		.mask = BIT(CRYSTAL_COVE_IRQ_PWRSRC),
+	},
+	[CRYSTAL_COVE_IRQ_THRM] = {
+		.mask = BIT(CRYSTAL_COVE_IRQ_THRM),
+	},
+	[CRYSTAL_COVE_IRQ_BCU] = {
+		.mask = BIT(CRYSTAL_COVE_IRQ_BCU),
+	},
+	[CRYSTAL_COVE_IRQ_ADC] = {
+		.mask = BIT(CRYSTAL_COVE_IRQ_ADC),
+	},
+	[CRYSTAL_COVE_IRQ_CHGR] = {
+		.mask = BIT(CRYSTAL_COVE_IRQ_CHGR),
+	},
+	[CRYSTAL_COVE_IRQ_GPIO] = {
+		.mask = BIT(CRYSTAL_COVE_IRQ_GPIO),
+	},
+	[CRYSTAL_COVE_IRQ_VHDMIOCP] = {
+		.mask = BIT(CRYSTAL_COVE_IRQ_VHDMIOCP),
+	},
+};
+
+static struct regmap_irq_chip crystal_cove_irq_chip = {
+	.name = "Crystal Cove",
+	.irqs = crystal_cove_irqs,
+	.num_irqs = ARRAY_SIZE(crystal_cove_irqs),
+	.num_regs = 1,
+	.status_base = CRYSTAL_COVE_REG_IRQLVL1,
+	.mask_base = CRYSTAL_COVE_REG_MIRQLVL1,
+};
+
+struct intel_soc_pmic_config intel_soc_pmic_config_crc = {
+	.irq_flags = IRQF_TRIGGER_RISING,
+	.cell_dev = crystal_cove_dev,
+	.n_cell_devs = ARRAY_SIZE(crystal_cove_dev),
+	.regmap_config = &crystal_cove_regmap_config,
+	.irq_chip = &crystal_cove_irq_chip,
+};
Signature · 4 lines
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
author
#9 lore raw

PATCH v5 3/3 gpio: Add support for Intel Crystal Cove PMIC

In reply to Zhu, Lejun

Devices based on Intel SoC products such as Baytrail have a Power Management IC. In the PMIC there are subsystems for voltage regulation, A/D conversion, GPIO and PWMs. The PMIC in Baytrail-T platform is called Crystal Cove.

This patch adds support for the GPIO function in Crystal Cove.

---
v5:
- Fix the order of doing gpiochip_add() and gpiochip_irqchip_add().
- Add it to this patch set, to merge it along with the MFD changes.

---
 drivers/gpio/Kconfig            |  13 ++
 drivers/gpio/Makefile           |   1 +
 drivers/gpio/gpio-crystalcove.c | 379 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 393 insertions(+)
 create mode 100644 drivers/gpio/gpio-crystalcove.c
drivers/gpio/Kconfig +13 -0
index a86c49a..fed08d9d 100644
@@ -440,6 +440,19 @@ config GPIO_ARIZONA
 	help
 	  Support for GPIOs on Wolfson Arizona class devices.
 
+config GPIO_CRYSTAL_COVE
+	tristate "GPIO support for Crystal Cove PMIC"
+	depends on INTEL_SOC_PMIC
+	select GPIOLIB_IRQCHIP
+	help
+	  Support for GPIO pins on Crystal Cove PMIC.
+
+	  Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC
+	  inside.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called gpio-crystalcove.
+
 config GPIO_LP3943
 	tristate "TI/National Semiconductor LP3943 GPIO expander"
 	depends on MFD_LP3943
drivers/gpio/Makefile +1 -0
index 6309aff..e6cd935 100644
@@ -20,6 +20,7 @@ obj-$(CONFIG_GPIO_BCM_KONA)	+= gpio-bcm-kona.o
 obj-$(CONFIG_GPIO_BT8XX)	+= gpio-bt8xx.o
 obj-$(CONFIG_GPIO_CLPS711X)	+= gpio-clps711x.o
 obj-$(CONFIG_GPIO_CS5535)	+= gpio-cs5535.o
+obj-$(CONFIG_GPIO_CRYSTAL_COVE)	+= gpio-crystalcove.o
 obj-$(CONFIG_GPIO_DA9052)	+= gpio-da9052.o
 obj-$(CONFIG_GPIO_DA9055)	+= gpio-da9055.o
 obj-$(CONFIG_GPIO_DAVINCI)	+= gpio-davinci.o
drivers/gpio/gpio-crystalcove.c new file +379 -0

379 lines not on this page · raw message

Signature · 1 line
1.8.3.2
Applied
#10 lore raw

Re: [PATCH v5 3/3] gpio: Add support for Intel Crystal Cove PMIC

Quoted 16 lines · Lejun

Devices based on Intel SoC products such as Baytrail have a Power Management IC. In the PMIC there are subsystems for voltage regulation, A/D conversion, GPIO and PWMs. The PMIC in Baytrail-T platform is called Crystal Cove.

This patch adds support for the GPIO function in Crystal Cove.

---
v5:
- Fix the order of doing gpiochip_add() and gpiochip_irqchip_add().
- Add it to this patch set, to merge it along with the MFD changes.

Quoted 6 lines
---
 drivers/gpio/Kconfig            |  13 ++
 drivers/gpio/Makefile           |   1 +
 drivers/gpio/gpio-crystalcove.c | 379 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 393 insertions(+)
 create mode 100644 drivers/gpio/gpio-crystalcove.c

Applied, thanks.

I will send a pull-request out to GPIO momentarily.

Quoted 421 lines
drivers/gpio/Kconfig +13 -0
index a86c49a..fed08d9d 100644
@@ -440,6 +440,19 @@ config GPIO_ARIZONA
 	help
 	  Support for GPIOs on Wolfson Arizona class devices.
 
+config GPIO_CRYSTAL_COVE
+	tristate "GPIO support for Crystal Cove PMIC"
+	depends on INTEL_SOC_PMIC
+	select GPIOLIB_IRQCHIP
+	help
+	  Support for GPIO pins on Crystal Cove PMIC.
+
+	  Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC
+	  inside.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called gpio-crystalcove.
+
 config GPIO_LP3943
 	tristate "TI/National Semiconductor LP3943 GPIO expander"
 	depends on MFD_LP3943
drivers/gpio/Makefile +1 -0
index 6309aff..e6cd935 100644
@@ -20,6 +20,7 @@ obj-$(CONFIG_GPIO_BCM_KONA)	+= gpio-bcm-kona.o
 obj-$(CONFIG_GPIO_BT8XX)	+= gpio-bt8xx.o
 obj-$(CONFIG_GPIO_CLPS711X)	+= gpio-clps711x.o
 obj-$(CONFIG_GPIO_CS5535)	+= gpio-cs5535.o
+obj-$(CONFIG_GPIO_CRYSTAL_COVE)	+= gpio-crystalcove.o
 obj-$(CONFIG_GPIO_DA9052)	+= gpio-da9052.o
 obj-$(CONFIG_GPIO_DA9055)	+= gpio-da9055.o
 obj-$(CONFIG_GPIO_DAVINCI)	+= gpio-davinci.o
drivers/gpio/gpio-crystalcove.c new file +379 -0
new file mode 100644
index 0000000..5a98499
@@ -0,0 +1,379 @@
+/*
+ * gpio-crystalcove.c - Intel Crystal Cove GPIO Driver
+ *
+ * Copyright (C) 2012, 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Author: Yang, Bin <[email protected]>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include <linux/mfd/intel_soc_pmic.h>
+
+#define CRYSTALCOVE_GPIO_NUM	16
+
+#define UPDATE_IRQ_TYPE		BIT(0)
+#define UPDATE_IRQ_MASK		BIT(1)
+
+#define GPIO0IRQ		0x0b
+#define GPIO1IRQ		0x0c
+#define MGPIO0IRQS0		0x19
+#define MGPIO1IRQS0		0x1a
+#define MGPIO0IRQSX		0x1b
+#define MGPIO1IRQSX		0x1c
+#define GPIO0P0CTLO		0x2b
+#define GPIO0P0CTLI		0x33
+#define GPIO1P0CTLO		0x3b
+#define GPIO1P0CTLI		0x43
+
+#define CTLI_INTCNT_DIS		(0)
+#define CTLI_INTCNT_NE		(1 << 1)
+#define CTLI_INTCNT_PE		(2 << 1)
+#define CTLI_INTCNT_BE		(3 << 1)
+
+#define CTLO_DIR_IN		(0)
+#define CTLO_DIR_OUT		(1 << 5)
+
+#define CTLO_DRV_CMOS		(0)
+#define CTLO_DRV_OD		(1 << 4)
+
+#define CTLO_DRV_REN		(1 << 3)
+
+#define CTLO_RVAL_2KDW		(0)
+#define CTLO_RVAL_2KUP		(1 << 1)
+#define CTLO_RVAL_50KDW		(2 << 1)
+#define CTLO_RVAL_50KUP		(3 << 1)
+
+#define CTLO_INPUT_SET	(CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP)
+#define CTLO_OUTPUT_SET	(CTLO_DIR_OUT | CTLO_INPUT_SET)
+
+enum ctrl_register {
+	CTRL_IN,
+	CTRL_OUT,
+};
+
+/**
+ * struct crystalcove_gpio - Crystal Cove GPIO controller
+ * @buslock: for bus lock/sync and unlock.
+ * @chip: the abstract gpio_chip structure.
+ * @regmap: the regmap from the parent device.
+ * @update: pending IRQ setting update, to be written to the chip upon unlock.
+ * @intcnt_value: the Interrupt Detect value to be written.
+ * @set_irq_mask: true if the IRQ mask needs to be set, false to clear.
+ */
+struct crystalcove_gpio {
+	struct mutex buslock; /* irq_bus_lock */
+	struct gpio_chip chip;
+	struct regmap *regmap;
+	int update;
+	int intcnt_value;
+	bool set_irq_mask;
+};
+
+static inline struct crystalcove_gpio *to_cg(struct gpio_chip *gc)
+{
+	return container_of(gc, struct crystalcove_gpio, chip);
+}
+
+static inline int to_reg(int gpio, enum ctrl_register reg_type)
+{
+	int reg;
+
+	if (reg_type == CTRL_IN) {
+		if (gpio < 8)
+			reg = GPIO0P0CTLI;
+		else
+			reg = GPIO1P0CTLI;
+	} else {
+		if (gpio < 8)
+			reg = GPIO0P0CTLO;
+		else
+			reg = GPIO1P0CTLO;
+	}
+
+	return reg + gpio % 8;
+}
+
+static void crystalcove_update_irq_mask(struct crystalcove_gpio *cg,
+					int gpio)
+{
+	u8 mirqs0 = gpio < 8 ? MGPIO0IRQS0 : MGPIO1IRQS0;
+	int mask = BIT(gpio % 8);
+
+	if (cg->set_irq_mask)
+		regmap_update_bits(cg->regmap, mirqs0, mask, mask);
+	else
+		regmap_update_bits(cg->regmap, mirqs0, mask, 0);
+}
+
+static void crystalcove_update_irq_ctrl(struct crystalcove_gpio *cg, int gpio)
+{
+	int reg = to_reg(gpio, CTRL_IN);
+
+	regmap_update_bits(cg->regmap, reg, CTLI_INTCNT_BE, cg->intcnt_value);
+}
+
+static int crystalcove_gpio_dir_in(struct gpio_chip *chip, unsigned gpio)
+{
+	struct crystalcove_gpio *cg = to_cg(chip);
+
+	return regmap_write(cg->regmap, to_reg(gpio, CTRL_OUT),
+			    CTLO_INPUT_SET);
+}
+
+static int crystalcove_gpio_dir_out(struct gpio_chip *chip, unsigned gpio,
+				    int value)
+{
+	struct crystalcove_gpio *cg = to_cg(chip);
+
+	return regmap_write(cg->regmap, to_reg(gpio, CTRL_OUT),
+			    CTLO_OUTPUT_SET | value);
+}
+
+static int crystalcove_gpio_get(struct gpio_chip *chip, unsigned gpio)
+{
+	struct crystalcove_gpio *cg = to_cg(chip);
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(cg->regmap, to_reg(gpio, CTRL_IN), &val);
+	if (ret)
+		return ret;
+
+	return val & 0x1;
+}
+
+static void crystalcove_gpio_set(struct gpio_chip *chip,
+				 unsigned gpio, int value)
+{
+	struct crystalcove_gpio *cg = to_cg(chip);
+
+	if (value)
+		regmap_update_bits(cg->regmap, to_reg(gpio, CTRL_OUT), 1, 1);
+	else
+		regmap_update_bits(cg->regmap, to_reg(gpio, CTRL_OUT), 1, 0);
+}
+
+static int crystalcove_irq_type(struct irq_data *data, unsigned type)
+{
+	struct crystalcove_gpio *cg = to_cg(irq_data_get_irq_chip_data(data));
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		cg->intcnt_value = CTLI_INTCNT_DIS;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		cg->intcnt_value = CTLI_INTCNT_BE;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		cg->intcnt_value = CTLI_INTCNT_PE;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		cg->intcnt_value = CTLI_INTCNT_NE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	cg->update |= UPDATE_IRQ_TYPE;
+
+	return 0;
+}
+
+static void crystalcove_bus_lock(struct irq_data *data)
+{
+	struct crystalcove_gpio *cg = to_cg(irq_data_get_irq_chip_data(data));
+
+	mutex_lock(&cg->buslock);
+}
+
+static void crystalcove_bus_sync_unlock(struct irq_data *data)
+{
+	struct crystalcove_gpio *cg = to_cg(irq_data_get_irq_chip_data(data));
+	int gpio = data->hwirq;
+
+	if (cg->update & UPDATE_IRQ_TYPE)
+		crystalcove_update_irq_ctrl(cg, gpio);
+	if (cg->update & UPDATE_IRQ_MASK)
+		crystalcove_update_irq_mask(cg, gpio);
+	cg->update = 0;
+
+	mutex_unlock(&cg->buslock);
+}
+
+static void crystalcove_irq_unmask(struct irq_data *data)
+{
+	struct crystalcove_gpio *cg = to_cg(irq_data_get_irq_chip_data(data));
+
+	cg->set_irq_mask = false;
+	cg->update |= UPDATE_IRQ_MASK;
+}
+
+static void crystalcove_irq_mask(struct irq_data *data)
+{
+	struct crystalcove_gpio *cg = to_cg(irq_data_get_irq_chip_data(data));
+
+	cg->set_irq_mask = true;
+	cg->update |= UPDATE_IRQ_MASK;
+}
+
+static struct irq_chip crystalcove_irqchip = {
+	.name			= "Crystal Cove",
+	.irq_mask		= crystalcove_irq_mask,
+	.irq_unmask		= crystalcove_irq_unmask,
+	.irq_set_type		= crystalcove_irq_type,
+	.irq_bus_lock		= crystalcove_bus_lock,
+	.irq_bus_sync_unlock	= crystalcove_bus_sync_unlock,
+};
+
+static irqreturn_t crystalcove_gpio_irq_handler(int irq, void *data)
+{
+	struct crystalcove_gpio *cg = data;
+	unsigned int p0, p1;
+	int pending;
+	int gpio;
+	unsigned int virq;
+
+	if (regmap_read(cg->regmap, GPIO0IRQ, &p0) ||
+	    regmap_read(cg->regmap, GPIO1IRQ, &p1))
+		return IRQ_NONE;
+
+	regmap_write(cg->regmap, GPIO0IRQ, p0);
+	regmap_write(cg->regmap, GPIO1IRQ, p1);
+
+	pending = p0 | p1 << 8;
+
+	for (gpio = 0; gpio < cg->chip.ngpio; gpio++) {
+		if (pending & BIT(gpio)) {
+			virq = irq_find_mapping(cg->chip.irqdomain, gpio);
+			generic_handle_irq(virq);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void crystalcove_gpio_dbg_show(struct seq_file *s,
+				      struct gpio_chip *chip)
+{
+	struct crystalcove_gpio *cg = to_cg(chip);
+	int gpio, offset;
+	unsigned int ctlo, ctli, mirqs0, mirqsx, irq;
+
+	for (gpio = 0; gpio < cg->chip.ngpio; gpio++) {
+		regmap_read(cg->regmap, to_reg(gpio, CTRL_OUT), &ctlo);
+		regmap_read(cg->regmap, to_reg(gpio, CTRL_IN), &ctli);
+		regmap_read(cg->regmap, gpio < 8 ? MGPIO0IRQS0 : MGPIO1IRQS0,
+			    &mirqs0);
+		regmap_read(cg->regmap, gpio < 8 ? MGPIO0IRQSX : MGPIO1IRQSX,
+			    &mirqsx);
+		regmap_read(cg->regmap, gpio < 8 ? GPIO0IRQ : GPIO1IRQ,
+			    &irq);
+
+		offset = gpio % 8;
+		seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s %s\n",
+			   gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ",
+			   ctli & 0x1 ? "hi" : "lo",
+			   ctli & CTLI_INTCNT_NE ? "fall" : "    ",
+			   ctli & CTLI_INTCNT_PE ? "rise" : "    ",
+			   ctlo,
+			   mirqs0 & BIT(offset) ? "s0 mask  " : "s0 unmask",
+			   mirqsx & BIT(offset) ? "sx mask  " : "sx unmask",
+			   irq & BIT(offset) ? "pending" : "       ");
+	}
+}
+
+static int crystalcove_gpio_probe(struct platform_device *pdev)
+{
+	int irq = platform_get_irq(pdev, 0);
+	struct crystalcove_gpio *cg;
+	int retval;
+	struct device *dev = pdev->dev.parent;
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
+
+	if (irq < 0)
+		return irq;
+
+	cg = devm_kzalloc(&pdev->dev, sizeof(*cg), GFP_KERNEL);
+	if (!cg)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, cg);
+
+	mutex_init(&cg->buslock);
+	cg->chip.label = KBUILD_MODNAME;
+	cg->chip.direction_input = crystalcove_gpio_dir_in;
+	cg->chip.direction_output = crystalcove_gpio_dir_out;
+	cg->chip.get = crystalcove_gpio_get;
+	cg->chip.set = crystalcove_gpio_set;
+	cg->chip.base = -1;
+	cg->chip.ngpio = CRYSTALCOVE_GPIO_NUM;
+	cg->chip.can_sleep = true;
+	cg->chip.dev = dev;
+	cg->chip.dbg_show = crystalcove_gpio_dbg_show;
+	cg->regmap = pmic->regmap;
+
+	retval = gpiochip_add(&cg->chip);
+	if (retval) {
+		dev_warn(&pdev->dev, "add gpio chip error: %d\n", retval);
+		return retval;
+	}
+
+	gpiochip_irqchip_add(&cg->chip, &crystalcove_irqchip, 0,
+			     handle_simple_irq, IRQ_TYPE_NONE);
+
+	retval = request_threaded_irq(irq, NULL, crystalcove_gpio_irq_handler,
+				      IRQF_ONESHOT, KBUILD_MODNAME, cg);
+
+	if (retval) {
+		dev_warn(&pdev->dev, "request irq failed: %d\n", retval);
+		goto out_remove_gpio;
+	}
+
+	return 0;
+
+out_remove_gpio:
+	WARN_ON(gpiochip_remove(&cg->chip));
+	return retval;
+}
+
+static int crystalcove_gpio_remove(struct platform_device *pdev)
+{
+	struct crystalcove_gpio *cg = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+	int err;
+
+	err = gpiochip_remove(&cg->chip);
+
+	if (irq >= 0)
+		free_irq(irq, cg);
+
+	return err;
+}
+
+static struct platform_driver crystalcove_gpio_driver = {
+	.probe = crystalcove_gpio_probe,
+	.remove = crystalcove_gpio_remove,
+	.driver = {
+		.name = "crystal_cove_gpio",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(crystalcove_gpio_driver);
+
+MODULE_AUTHOR("Yang, Bin <[email protected]>");
+MODULE_DESCRIPTION("Intel Crystal Cove GPIO Driver");
+MODULE_LICENSE("GPL v2");
Signature · 4 lines
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
#11 lore raw

[GIT PULL] LinusW - Immutable branch between MFD and GPIO

In reply to Zhu, Lejun

The following changes since commit 7171511eaec5bf23fb06078f59784a3a0626b38f:

Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/mfd-gpio-v3.17

for you to fetch changes up to 104fb1d5153c563f453cb9c048fa0a17318a2348:

gpio: Add support for Intel Crystal Cove PMIC (2014-06-17 15:59:52 +0100)

----------------------------------------------------------------
Immutable branch between MFD and GPIO for v3.17

----------------------------------------------------------------
Zhu, Lejun (3):
mfd: intel_soc_pmic: Core driver
mfd: intel_soc_pmic: Crystal Cove support
gpio: Add support for Intel Crystal Cove PMIC

 drivers/gpio/Kconfig               |  13 ++
 drivers/gpio/Makefile              |   1 +
 drivers/gpio/gpio-crystalcove.c    | 379 +++++++++++++++++++++++++++++++++++++
 drivers/mfd/Kconfig                |  12 ++
 drivers/mfd/Makefile               |   3 +
 drivers/mfd/intel_soc_pmic_core.c  | 168 ++++++++++++++++
 drivers/mfd/intel_soc_pmic_core.h  |  32 ++++
 drivers/mfd/intel_soc_pmic_crc.c   | 158 ++++++++++++++++
 include/linux/mfd/intel_soc_pmic.h |  30 +++
 9 files changed, 796 insertions(+)
 create mode 100644 drivers/gpio/gpio-crystalcove.c
 create mode 100644 drivers/mfd/intel_soc_pmic_core.c
 create mode 100644 drivers/mfd/intel_soc_pmic_core.h
 create mode 100644 drivers/mfd/intel_soc_pmic_crc.c
 create mode 100644 include/linux/mfd/intel_soc_pmic.h
Signature · 4 lines
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
#12 lore raw

[GIT PULL v2] LinusW - Immutable branch between MFD and GPIO

Linus,

Slight amendment. I've applied a fix, as this branch broke PPC.

The following changes since commit 7171511eaec5bf23fb06078f59784a3a0626b38f:

Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/mfd-gpio-v3.17

for you to fetch changes up to 8dbf2aa3c308ade864261e8047b0dce1f4ed9a7e:

gpio: crystalcove: Fix implicit declaration of function 'seq_printf' error (2014-06-19 16:56:28 +0100)

----------------------------------------------------------------
Immutable branch between MFD and GPIO for v3.17.

----------------------------------------------------------------
Lee Jones (1):
gpio: crystalcove: Fix implicit declaration of function 'seq_printf' error

Zhu, Lejun (3):
mfd: intel_soc_pmic: Core driver
mfd: intel_soc_pmic: Crystal Cove support
gpio: Add support for Intel Crystal Cove PMIC

 drivers/gpio/Kconfig               |  13 ++
 drivers/gpio/Makefile              |   1 +
 drivers/gpio/gpio-crystalcove.c    | 380 +++++++++++++++++++++++++++++++++++++
 drivers/mfd/Kconfig                |  12 ++
 drivers/mfd/Makefile               |   3 +
 drivers/mfd/intel_soc_pmic_core.c  | 168 ++++++++++++++++
 drivers/mfd/intel_soc_pmic_core.h  |  32 ++++
 drivers/mfd/intel_soc_pmic_crc.c   | 158 +++++++++++++++
 include/linux/mfd/intel_soc_pmic.h |  30 +++
 9 files changed, 797 insertions(+)
 create mode 100644 drivers/gpio/gpio-crystalcove.c
 create mode 100644 drivers/mfd/intel_soc_pmic_core.c
 create mode 100644 drivers/mfd/intel_soc_pmic_core.h
 create mode 100644 drivers/mfd/intel_soc_pmic_crc.c
 create mode 100644 include/linux/mfd/intel_soc_pmic.h
Signature · 4 lines
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
#13 lore raw

Re: [GIT PULL] LinusW - Immutable branch between MFD and GPIO

In reply to Lee Jones
Quoted 11 lines · Lee Jones

The following changes since commit 7171511eaec5bf23fb06078f59784a3a0626b38f:

Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/mfd-gpio-v3.17

for you to fetch changes up to 104fb1d5153c563f453cb9c048fa0a17318a2348:

gpio: Add support for Intel Crystal Cove PMIC (2014-06-17 15:59:52 +0100)

I think I'll just optimistically assume this will merge nicely for v3.17. Less trouble, and does not require MFD to be merged before the GPIO tree in the merge window :-)

Yours,
Linus Walleij