Skip to contentSkip to conversation

bitbake virtual/kernel -c devshell doesn't build the sdk

DISCUSSION Adrian Dudau 2 participants 3 messages Jun 2, 2014 – Jun 3, 2014

lore
Share & tools
lore
#0 lore raw

Hi,

Starting from a fresh build folder, I run "bitbake -c devshell virtual/kernel" and expect to have the cross SDK sourced and be able to build the kernel in the devshell. The issue is that even though PATH is preppended correctly with the expected location of the SDK (in my case tmp/sysroots/x86_64-linux/usr/bin/ppce500v2-enea-linux-gnuspe), the cross SDK is not built. Am I wrong assuming that -c devshell virtual/kernel should depend on the crosssdk?

best regards,
--Adrian

#1 lore raw

Adrian did you run a -c compile before -c devshell?
I do not believe you should have a crosssdk with only calling -c devshell on a pachage/recipe.

Alex

On Monday, June 2, 2014 8:21 PM, Adrian Dudau <[email protected]> wrote:

Hi,

Starting from a fresh build folder, I run "bitbake -c devshell virtual/kernel" and expect to have the cross SDK sourced and be able to build the kernel in the devshell. The issue is that even though PATH is preppended correctly with the expected location of the SDK (in my case tmp/sysroots/x86_64-linux/usr/bin/ppce500v2-enea-linux-gnuspe), the cross SDK is not built.  Am I wrong assuming that  -c devshell virtual/kernel should depend on the crosssdk?

best regards,
--Adrian

Signature · 4 lines
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
#2 lore raw

hi,

Quoted 2 lines · Alexandru Vaduva

Adrian did you run a -c compile before -c devshell?

No I have not. And it was intentional. I know that if I compile anything I will get the crossdk.

Quoted 2 lines

I do not believe you should have a crosssdk with only calling -c devshell on a pachage/recipe.

My understanding was the opposite. But if this is normal behaviour than I am ok with it.

Quoted 3 lines

Alex

--Adrian

Quoted 28 lines

On Monday, June 2, 2014 8:21 PM, Adrian Dudau <[email protected]> wrote:

Hi,

Starting from a fresh build folder, I run "bitbake -c devshell virtual/kernel" and expect to have the cross SDK sourced and be able to
build the kernel in the devshell. The issue is that even though PATH is
preppended correctly with the expected location of the SDK (in my case tmp/sysroots/x86_64-linux/usr/bin/ppce500v2-enea-linux-gnuspe), the cross SDK is not built. Am I wrong assuming that -c devshell virtual/kernel should depend on the crosssdk?

best regards,
--Adrian

Signature · 4 lines
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto