Skip to contentSkip to conversation

meta-yocto-bsp: enable the jffs2 for mpc8315e-rdb board

PATCH In review Kevin Hao 2 participants 5 messages Jun 14, 2014 – Jun 16, 2014

lore
Share & tools
lore

Kevin Hao

author
#0 lore raw

v2 cover meta-yocto-bsp: enable the jffs2 for mpc8315e-rdb board

Hi,

v2:
Add the example about booting from jffs2 root in README.hardware

v1:
This tries to enable the jffs2 support for the mpc8315e-rdb board. I have tested the jffs2 with the following steps and it worked perfectly.

1. root@mpc8315e-rdb:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00800000 00010000 "fe000000.flash"
mtd1: 00100000 00004000 "u-boot"
mtd2: 00300000 00004000 "kernel"
mtd3: 01c00000 00004000 "fs"

2. root@mpc8315e-rdb:~# flash_eraseall /dev/mtd3
flash_eraseall has been replaced by flash_erase <mtddev> 0 0; please use it Erasing 16 Kibyte @ 1bec000 -- 99 % complete flash_erase: Skipping bad block at 01bf0000
flash_erase: Skipping bad block at 01bf4000
flash_erase: Skipping bad block at 01bf8000
flash_erase: Skipping bad block at 01bfc000
Erasing 16 Kibyte @ 1bfc000 -- 100 % complete

3. root@mpc8315e-rdb:~# flashcp core-image-minimal-mpc8315e-rdb.jffs2 /dev/mtd3

4. Then boot with a jffs2 rootfs

5. root@mpc8315e-rdb:~# cat /proc/cmdline root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,115200 root@mpc8315e-rdb:~#

root@mpc8315e-rdb:~# mount
rootfs on / type rootfs (rw)
/dev/root on / type jffs2 (rw,relatime)
devtmpfs on /dev type devtmpfs (rw,relatime,size=59136k,nr_inodes=14784,mode=755)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
tmpfs on /var/volatile type tmpfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)

The following changes since commit 8e0c54cd0e82ffe120f84f495101cd29e6fd06bf:

bitbake: bb/utils: fix contains_any() (2014-06-12 17:47:59 +0100)

are available in the git repository at:

git://git.yoctoproject.org/poky-contrib hao/master

for you to fetch changes up to 05ef8967ff189b16485e1a462c8de1ed74a08a32:

mpc8315e-rdb: add the example about booting from jffs2 root (2014-06-14 09:24:26 +0800)

----------------------------------------------------------------
Kevin Hao (3):
mpc8315e-rdb: bump to linux-yocto 3.14
mpc8315e-rdb: add the jffs2 image support
mpc8315e-rdb: add the example about booting from jffs2 root

 README.hardware                                          | 16 ++++++++++++++++
 meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf            |  5 ++++-
 .../recipes-kernel/linux/linux-yocto_3.14.bbappend       |  3 +++
 3 files changed, 23 insertions(+), 1 deletion(-)
author
#1 lore raw

PATCH v2 1/3 mpc8315e-rdb: bump to linux-yocto 3.14

---
v2: No change.

 meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf                 | 2 +-
 meta-yocto-bsp/recipes-kernel/linux/linux-yocto_3.14.bbappend | 3 +++
 2 files changed, 4 insertions(+), 1 deletion(-)
meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf +1 -1
index ab1eaa910143..ef76f2a755c0 100644
@@ -14,7 +14,7 @@ SERIAL_CONSOLE = "115200 ttyS0"
 
 MACHINE_FEATURES = "keyboard pci ext2 ext3 serial"
 
-PREFERRED_VERSION_linux-yocto ?= "3.10%"
+PREFERRED_VERSION_linux-yocto ?= "3.14%"
 PREFERRED_PROVIDER_virtual/kernel = "linux-yocto"
 
 PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg"
meta-yocto-bsp/recipes-kernel/linux/linux-yocto_3.14.bbappend +3 -0
index e0964eb40a47..f218bb15276d 100644
@@ -2,6 +2,7 @@ KBRANCH_genericx86  = "standard/common-pc/base"
 KBRANCH_genericx86-64  = "standard/common-pc-64/base"
 KBRANCH_edgerouter = "standard/edgerouter"
 KBRANCH_beaglebone = "standard/beaglebone"
+KBRANCH_mpc8315e-rdb = "standard/fsl-mpc8315e-rdb"
 
 KMACHINE_genericx86 ?= "common-pc"
 KMACHINE_genericx86-64 ?= "common-pc-64"
@@ -10,8 +11,10 @@ SRCREV_machine_genericx86 ?= "0143c6ebb4a2d63b241df5f608b19f483f7eb9e0"
 SRCREV_machine_genericx86-64 ?= "0143c6ebb4a2d63b241df5f608b19f483f7eb9e0"
 SRCREV_machine_edgerouter ?= "0143c6ebb4a2d63b241df5f608b19f483f7eb9e0"
 SRCREV_machine_beaglebone ?= "0143c6ebb4a2d63b241df5f608b19f483f7eb9e0"
+SRCREV_machine_mpc8315e-rdb ?= "0143c6ebb4a2d63b241df5f608b19f483f7eb9e0"
 
 COMPATIBLE_MACHINE_genericx86 = "genericx86"
 COMPATIBLE_MACHINE_genericx86-64 = "genericx86-64"
 COMPATIBLE_MACHINE_edgerouter = "edgerouter"
 COMPATIBLE_MACHINE_beaglebone = "beaglebone"
+COMPATIBLE_MACHINE_mpc8315e-rdb = "mpc8315e-rdb"
Signature · 1 line
1.9.3
author
#2 lore raw

PATCH v2 2/3 mpc8315e-rdb: add the jffs2 image support

In reply to Kevin Hao

There is a 32M NAND flash on this board, so it would be convenient that a jffs2 image is created by default. Also change the default image type from "tar.gz" to "tar.bz2" in order to be compatible with the beaglebone black and edgerouter BSP.

---
v2: No change.

 meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf | 3 +++
 1 file changed, 3 insertions(+)
meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf +3 -0
index ef76f2a755c0..43bdce4b1c5b 100644
@@ -28,3 +28,6 @@ UBOOT_ENTRYPOINT = "0x00000000"
 KERNEL_DEVICETREE = "${S}/arch/powerpc/boot/dts/mpc8315erdb.dts"
 
 MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
+
+IMAGE_FSTYPES ?= "jffs2 tar.bz2"
+JFFS2_ERASEBLOCK = "0x4000"
Signature · 1 line
1.9.3
author
#3 lore raw

PATCH v2 3/3 mpc8315e-rdb: add the example about booting from jffs2 root

In reply to Kevin Hao

---
v2: A new patch introduced in v2.

 README.hardware | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
README.hardware +16 -0
index f11fdd7794ae..d8faaa3bdb9d 100644
@@ -324,6 +324,22 @@ Load the kernel and dtb (device tree blob), and boot the system as follows:
  => tftp 2000000 uImage-mpc8315e-rdb.dtb
  => bootm 1000000 - 2000000
 
+--- Booting from JFFS2 root ---
+
+ 1. First boot the board with NFS root.
+
+ 2. Erase the MTD partition which will be used as root:
+
+    $ flash_eraseall  /dev/mtd3
+
+ 3. Copy the JFFS2 image to the MTD partition:
+
+    $ flashcp core-image-minimal-mpc8315e-rdb.jffs2 /dev/mtd3
+
+ 4. Then reboot the board and set up the environment in U-Boot:
+
+    => setenv bootargs root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,115200
+
 
 Ubiquiti Networks EdgeRouter Lite (edgerouter)
 ==============================================
Signature · 1 line
1.9.3
#4 lore raw
In reply to Kevin Hao
Quoted 5 lines · Kevin Hao

Hi,

v2:
Add the example about booting from jffs2 root in README.hardware

Looks good to me.

As promised, I stacked these on top of my kernel update for NAND support on the board.

If all goes well, I'll send the merge pull request tomorrow.

Bruce

Quoted 60 lines

v1:
This tries to enable the jffs2 support for the mpc8315e-rdb board. I have tested the jffs2 with the following steps and it worked perfectly.

1. root@mpc8315e-rdb:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00800000 00010000 "fe000000.flash"
mtd1: 00100000 00004000 "u-boot"
mtd2: 00300000 00004000 "kernel"
mtd3: 01c00000 00004000 "fs"

2. root@mpc8315e-rdb:~# flash_eraseall /dev/mtd3
flash_eraseall has been replaced by flash_erase <mtddev> 0 0; please use it Erasing 16 Kibyte @ 1bec000 -- 99 % complete flash_erase: Skipping bad block at 01bf0000
flash_erase: Skipping bad block at 01bf4000
flash_erase: Skipping bad block at 01bf8000
flash_erase: Skipping bad block at 01bfc000
Erasing 16 Kibyte @ 1bfc000 -- 100 % complete

3. root@mpc8315e-rdb:~# flashcp core-image-minimal-mpc8315e-rdb.jffs2 /dev/mtd3

4. Then boot with a jffs2 rootfs

5. root@mpc8315e-rdb:~# cat /proc/cmdline root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,115200 root@mpc8315e-rdb:~#

root@mpc8315e-rdb:~# mount
rootfs on / type rootfs (rw)
/dev/root on / type jffs2 (rw,relatime)
devtmpfs on /dev type devtmpfs (rw,relatime,size=59136k,nr_inodes=14784,mode=755)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
tmpfs on /var/volatile type tmpfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)

The following changes since commit 8e0c54cd0e82ffe120f84f495101cd29e6fd06bf:

   bitbake: bb/utils: fix contains_any() (2014-06-12 17:47:59 +0100)

are available in the git repository at:

git://git.yoctoproject.org/poky-contrib hao/master

for you to fetch changes up to 05ef8967ff189b16485e1a462c8de1ed74a08a32:

   mpc8315e-rdb: add the example about booting from jffs2 root (2014-06-14 09:24:26 +0800)

----------------------------------------------------------------
Kevin Hao (3):
mpc8315e-rdb: bump to linux-yocto 3.14
mpc8315e-rdb: add the jffs2 image support
mpc8315e-rdb: add the example about booting from jffs2 root

  README.hardware                                          | 16 ++++++++++++++++
  meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf            |  5 ++++-
  .../recipes-kernel/linux/linux-yocto_3.14.bbappend       |  3 +++
  3 files changed, 23 insertions(+), 1 deletion(-)