Skip to contentSkip to conversation

ARM: dts: imx6sx: Fix usbmisc compatible string

PATCH New Fabio Estevam 2 participants 4 messages Jun 23, 2014 – Jun 25, 2014

Subsystems (2)
Device tree bindings Arm i.MX and Layerscape
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/3 ARM: dts: imx6sx: Fix usbmisc compatible string

From: Fabio Estevam <[email protected]>

Fix usbmisc compatible string so that usbmisc node can be found and USB functionality can be functional.

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/boot/dts/imx6sx.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/imx6sx.dtsi +1 -1
index 78ccf61..d3ed62c 100644
@@ -753,7 +753,7 @@
 
 			usbmisc: usbmisc at 02184800 {
 				#index-cells = <1>;
-				compatible = "fsl,imx6sx-usbmisc";
+				compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc";
 				reg = <0x02184800 0x200>;
 				clocks = <&clks IMX6SX_CLK_USBOH3>;
 			};
Signature · 1 line
1.8.3.2
author reviewer
#1 lore raw

PATCH 2/3 ARM: dts: imx6sx-sdb: Add USB support

From: Fabio Estevam <[email protected]>

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/boot/dts/imx6sx-sdb.dts | 55 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)
arch/arm/boot/dts/imx6sx-sdb.dts +55 -0
index da40f13..18c228e 100644
@@ -58,6 +58,30 @@
 			gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
+
+		reg_usb_otg1_vbus: regulator at 1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_otg1>;
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg2_vbus: regulator at 2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_otg2>;
+			regulator-name = "usb_otg2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
 	};
 };
 

@@ -81,6 +105,19 @@
 	status = "okay";
 };
 
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;

@@ -163,6 +200,24 @@
 			>;
 		};
 
+		pinctrl_usb_otg1: usbotg1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0
+			>;
+		};
+
+		pinctrl_usb_otg1_id: usbotg1idgrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059
+			>;
+		};
+
+		pinctrl_usb_otg2: usbot2ggrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12	0x10b0
+			>;
+		};
+
 		pinctrl_usdhc2: usdhc2grp {
 			fsl,pins = <
 				MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
Signature · 1 line
1.8.3.2
author reviewer
#2 lore raw

PATCH 3/3 ARM: dts: imx6sx-sdb: Add PMIC support

In reply to Fabio Estevam

From: Fabio Estevam <[email protected]>

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/boot/dts/imx6sx-sdb.dts | 115 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 115 insertions(+)
arch/arm/boot/dts/imx6sx-sdb.dts +115 -0
index 18c228e..2571261 100644
@@ -92,6 +92,114 @@
 	status = "okay";
 };
 
+&i2c1 {
+        clock-frequency = <100000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2c1>;
+        status = "okay";
+
+	pmic: pfuze100 at 08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;

@@ -178,6 +286,13 @@
 			>;
 		};
 
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
+				MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
 		pinctrl_vcc_sd3: vccsd3grp {
 			fsl,pins = <
 				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
Signature · 1 line
1.8.3.2