Skip to contentSkip to conversation

ASoC: s6000-i2s: Fix s6000_i2s_remove() return type

PATCH Applied Lars-Peter Clausen 2 participants 4 messages Jun 30, 2014 – Jul 4, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/3 ASoC: s6000-i2s: Fix s6000_i2s_remove() return type

The platform_driver remove callback return type is int not void.

Fixes the following warning:

	sound/soc/s6000/s6000-i2s.c:604:19: warning: incorrect type in initializer (different base types)
	sound/soc/s6000/s6000-i2s.c:604:19:    expected int ( *remove )( ... )
	sound/soc/s6000/s6000-i2s.c:604:19:    got void ( static [toplevel] *<noident>)( ... )
---
 sound/soc/s6000/s6000-i2s.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
sound/soc/s6000/s6000-i2s.c +3 -1
index 7eba797..1c8d011 100644
@@ -570,7 +570,7 @@ err_release_none:
 	return ret;
 }
 
-static void s6000_i2s_remove(struct platform_device *pdev)
+static int s6000_i2s_remove(struct platform_device *pdev)
 {
 	struct s6000_i2s_dev *dev = dev_get_drvdata(&pdev->dev);
 	struct resource *region;
@@ -597,6 +597,8 @@ static void s6000_i2s_remove(struct platform_device *pdev)
 	iounmap(mmio);
 	region = platform_get_resource(pdev, IORESOURCE_IO, 0);
 	release_mem_region(region->start, resource_size(region));
+
+	return 0;
 }
 
 static struct platform_driver s6000_i2s_driver = {
Signature · 1 line
1.8.0
#1 lore raw

PATCH 2/3 ASoC: s6000: Allow to build when COMPILE_TEST is enabled

Most of the ASoC s6000 code is architecture independent. This patch makes it possible to select the platform when COMPILE_TEST is enabled.

The only architecture dependent code is the PCM driver which will still only be selected if XTENSA_VARIANT_S6000 is enabled.

---
 sound/soc/s6000/Kconfig       | 10 ++++++++--
 sound/soc/s6000/Makefile      |  2 +-
 sound/soc/s6000/s6105-ipcam.c |  2 --
 3 files changed, 9 insertions(+), 5 deletions(-)
sound/soc/s6000/Kconfig +8 -2
index c74eb3d..4823e1e 100644
@@ -1,17 +1,23 @@
 config SND_S6000_SOC
 	tristate "SoC Audio for the Stretch s6000 family"
-	depends on XTENSA_VARIANT_S6000
+	depends on XTENSA_VARIANT_S6000 || COMPILE_TEST
+	depends on HAS_IOMEM
+	select SND_S6000_SOC_PCM if XTENSA_VARIANT_S6000
 	help
 	  Say Y or M if you want to add support for codecs attached to
 	  s6000 family chips. You will also need to select the platform
 	  to support below.
 
+config SND_S6000_SOC_PCM
+	tristate
+
 config SND_S6000_SOC_I2S
 	tristate
 
 config SND_S6000_SOC_S6IPCAM
 	tristate "SoC Audio support for Stretch 6105 IP Camera"
-	depends on SND_S6000_SOC && XTENSA_PLATFORM_S6105
+	depends on SND_S6000_SOC
+	depends on XTENSA_PLATFORM_S6105 || COMPILE_TEST
 	select SND_S6000_SOC_I2S
 	select SND_SOC_TLV320AIC3X
 	help
sound/soc/s6000/Makefile +1 -1
index 7a61361..0f0ae2a 100644
@@ -2,7 +2,7 @@
 snd-soc-s6000-objs := s6000-pcm.o
 snd-soc-s6000-i2s-objs := s6000-i2s.o
 
-obj-$(CONFIG_SND_S6000_SOC) += snd-soc-s6000.o
+obj-$(CONFIG_SND_S6000_SOC_PCM) += snd-soc-s6000.o
 obj-$(CONFIG_SND_S6000_SOC_I2S) += snd-soc-s6000-i2s.o
 
 # s6105 Machine Support
sound/soc/s6000/s6105-ipcam.c +0 -2
index 0b21d1d..50875e6 100644
@@ -19,8 +19,6 @@
 #include <sound/pcm.h>
 #include <sound/soc.h>
 
-#include <variant/dmac.h>
-
 #include "s6000-pcm.h"
 #include "s6000-i2s.h"
 
Signature · 1 line
1.8.0
#2 lore raw

PATCH 3/3 ASoC: s6105-ipcam: Automatically disconnect non-connected pins

In reply to Lars-Peter Clausen

All CODEC input and output widgets are either in the DAPM routing table or manually marked as non-connected. This means the card is fully routed and we can let the core take care of disconnecting non-connected pins.

---
 sound/soc/s6000/s6105-ipcam.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)
sound/soc/s6000/s6105-ipcam.c +1 -14
index 50875e6..3510c01 100644
@@ -133,22 +133,8 @@ static const struct snd_kcontrol_new audio_out_mux = {
 /* Logic for a aic3x as connected on the s6105 ip camera ref design */
 static int s6105_aic3x_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_codec *codec = rtd->codec;
-	struct snd_soc_dapm_context *dapm = &codec->dapm;
 	struct snd_soc_card *card = rtd->card;
 
-	/* not present */
-	snd_soc_dapm_nc_pin(dapm, "MONO_LOUT");
-	snd_soc_dapm_nc_pin(dapm, "LINE2L");
-	snd_soc_dapm_nc_pin(dapm, "LINE2R");
-
-	/* not connected */
-	snd_soc_dapm_nc_pin(dapm, "MIC3L"); /* LINE2L on this chip */
-	snd_soc_dapm_nc_pin(dapm, "MIC3R"); /* LINE2R on this chip */
-	snd_soc_dapm_nc_pin(dapm, "LLOUT");
-	snd_soc_dapm_nc_pin(dapm, "RLOUT");
-	snd_soc_dapm_nc_pin(dapm, "HPRCOM");
-
 	/* must correspond to audio_out_mux.private_value initializer */
 	snd_soc_dapm_disable_pin(&card->dapm, "Audio Out Differential");
 
@@ -180,6 +166,7 @@ static struct snd_soc_card snd_soc_card_s6105 = {
 	.num_dapm_widgets = ARRAY_SIZE(aic3x_dapm_widgets),
 	.dapm_routes = audio_map,
 	.num_dapm_routes = ARRAY_SIZE(audio_map),
+	.fully_routed = true,
 };
 
 static struct s6000_snd_platform_data s6105_snd_data __initdata = {
Signature · 1 line
1.8.0