rnndb: support for MDP5 v1.3 using dynamic offsets
cover rnndb: support for MDP5 v1.3 using dynamic offsets
This patchset is intended to be used on top of Rob's wip changes in the 'variable-bases' branch. Dynamic offsets are introduced for MDP5 register description in order to support multiple versions (v.1.3 added here).
Stephane Viau (2):
WIP: rnndb: move reg_.. bitset definitions to common MDP xml file
WIP: rnndb: add support for MDP5 v1.3 using dynamic offsets
rnndb/mdp/mdp4.xml | 10 ---------- rnndb/mdp/mdp5.xml | 30 ++++++++++++++++++++++-------- rnndb/mdp/mdp_common.xml | 10 ++++++++++ 3 files changed, 32 insertions(+), 18 deletions(-)
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation
PATCH 1/2 WIP: rnndb: move reg_.. bitset definitions to common MDP xml file
Since reg_wh and reg_xy are used in both mdp4.xml and mdp5.xml, let's define them in mdp_common.xml which is included by these two files.
--- rnndb/mdp/mdp4.xml | 10 ---------- rnndb/mdp/mdp_common.xml | 10 ++++++++++ 2 files changed, 10 insertions(+), 10 deletions(-)
rnndb/mdp/mdp4.xml +0 -10
@@ -71,16 +71,6 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <bitfield name="PIPE7_MIXER1" pos="31" type="boolean"/> </bitset> - <bitset name="reg_wh" inline="yes"> - <bitfield name="HEIGHT" low="16" high="31" type="uint"/> - <bitfield name="WIDTH" low="0" high="15" type="uint"/> - </bitset> - - <bitset name="reg_xy" inline="yes"> - <bitfield name="Y" low="16" high="31" type="uint"/> - <bitfield name="X" low="0" high="15" type="uint"/> - </bitset> - <bitset name="MDP4_IRQ"> <bitfield name="OVERLAY0_DONE" pos="0" type="boolean"/> <bitfield name="OVERLAY1_DONE" pos="1" type="boolean"/>
rnndb/mdp/mdp_common.xml +10 -0
@@ -38,6 +38,16 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <value name="BPC8A" value="3"/> <!-- 8 bits --> </enum> +<bitset name="reg_wh" inline="yes"> + <bitfield name="HEIGHT" low="16" high="31" type="uint"/> + <bitfield name="WIDTH" low="0" high="15" type="uint"/> +</bitset> + +<bitset name="reg_xy" inline="yes"> + <bitfield name="Y" low="16" high="31" type="uint"/> + <bitfield name="X" low="0" high="15" type="uint"/> +</bitset> + <bitset name="mdp_unpack_pattern" inline="yes"> <bitfield name="ELEM0" low="0" high="7"/> <bitfield name="ELEM1" low="8" high="15"/>
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation
PATCH 2/2 WIP: rnndb: add support for MDP5 v1.3 using dynamic offsets
In reply to Stephane ViauIn order to deal with offsets differences between MDP5 v1.3 and earlier versions, dynamic offsets are introduced.
At runtime, MDP version is read to find out which hardware configuration is embedded on the target. Once this is found out, these dynamic offsets are set through global variables initializations.
The number of instances for vig/rgb pipes, LM, DSPP is increased in v1.3.
This change reflects this hardware configuration and makes the corresponding registers accessible.
--- rnndb/mdp/mdp5.xml | 30 ++++++++++++++++++++++-------- 1 file changed, 22 insertions(+), 8 deletions(-)
rnndb/mdp/mdp5.xml +22 -8
@@ -35,6 +35,8 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <value name="SSPP_RGB2" value="5"/> <value name="SSPP_DMA0" value="6"/> <value name="SSPP_DMA1" value="7"/> + <value name="SSPP_VIG3" value="8"/> + <value name="SSPP_RGB3" value="9"/> </enum> <enum name="mdp5_format">
@@ -96,7 +98,11 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <value name="CID_RGB0" value="16"/> <value name="CID_RGB1" value="17"/> <value name="CID_RGB2" value="18"/> - <value name="CID_MAX" value="19"/> + <value name="CID_VIG3_Y" value="19"/> + <value name="CID_VIG3_CR" value="20"/> + <value name="CID_VIG3_CB" value="21"/> + <value name="CID_RGB3" value="22"/> + <value name="CID_MAX" value="23"/> </enum> <bitset name="MDP5_IRQ">
@@ -199,8 +205,8 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> </array> <!-- check length/index.. --> - <array offset="0x00600" name="CTL" length="4" stride="0x100"> - <array offset="0x000" name="LAYER" length="5" stride="4"> + <array doffsets="mdp5_cfg->ctl.base[0],mdp5_cfg->ctl.base[1],mdp5_cfg->ctl.base[2],mdp5_cfg->ctl.base[3],mdp5_cfg->ctl.base[4]" name="CTL" length="5" stride="0x400"> + <array offsets="0x000,0x004,0x008,0x00C,0x010,0x024" name="LAYER" length="6" stride="4"> <reg32 offset="0" name="REG"> <bitfield name="VIG0" low="0" high="2" type="mdp_mixer_stage_id"/> <bitfield name="VIG1" low="3" high="5" type="mdp_mixer_stage_id"/>
@@ -212,6 +218,8 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <bitfield name="DMA1" low="21" high="23" type="mdp_mixer_stage_id"/> <bitfield name="BORDER_COLOR" pos="24" type="boolean"/> <bitfield name="CURSOR_OUT" pos="25" type="boolean"/> + <bitfield name="VIG3" low="26" high="28" type="mdp_mixer_stage_id"/> + <bitfield name="RGB3" low="29" high="31" type="mdp_mixer_stage_id"/> </reg32> </array> <reg32 offset="0x014" name="OP">
@@ -231,18 +239,24 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <bitfield name="LM0" pos="6" type="boolean"/> <bitfield name="LM1" pos="7" type="boolean"/> <bitfield name="LM2" pos="8" type="boolean"/> + <bitfield name="LM3" pos="9" type="boolean"/> + <bitfield name="LM4" pos="10" type="boolean"/> <bitfield name="DMA0" pos="11" type="boolean"/> <bitfield name="DMA1" pos="12" type="boolean"/> <bitfield name="DSPP0" pos="13" type="boolean"/> <bitfield name="DSPP1" pos="14" type="boolean"/> <bitfield name="DSPP2" pos="15" type="boolean"/> <bitfield name="CTL" pos="17" type="boolean"/> + <bitfield name="VIG3" pos="18" type="boolean"/> + <bitfield name="RGB3" pos="19" type="boolean"/> + <bitfield name="LM5" pos="20" type="boolean"/> + <bitfield name="DSPP3" pos="21" type="boolean"/> </reg32> <reg32 offset="0x01C" name="START"/> <reg32 offset="0x020" name="PACK_3D"/> </array> - <array offset="0x01200" name="PIPE" length="8" stride="0x400" index="mdp5_pipe"> + <array doffsets="mdp5_cfg->pipe_vig.base[0],mdp5_cfg->pipe_vig.base[1],mdp5_cfg->pipe_vig.base[2],mdp5_cfg->pipe_rgb.base[0],mdp5_cfg->pipe_rgb.base[1],mdp5_cfg->pipe_rgb.base[2],mdp5_cfg->pipe_dma.base[0],mdp5_cfg->pipe_dma.base[1],mdp5_cfg->pipe_vig.base[3],mdp5_cfg->pipe_rgb.base[3]" name="PIPE" length="10" stride="0x400" index="mdp5_pipe"> <reg32 offset="0x2C4" name="HIST_CTL_BASE"/> <reg32 offset="0x2F0" name="HIST_LUT_BASE"/> <reg32 offset="0x300" name="HIST_LUT_SWAP"/>
@@ -325,7 +339,7 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <reg32 offset="0x224" name="SCALE_INIT_PHASE_Y"/> </array> - <array offset="0x03200" name="LM" length="3" stride="0x400"> + <array doffsets="mdp5_cfg->lm.base[0],mdp5_cfg->lm.base[1],mdp5_cfg->lm.base[2],mdp5_cfg->lm.base[3],mdp5_cfg->lm.base[4]" name="LM" length="5" stride="0x400"> <reg32 offset="0x000" name="BLEND_COLOR_OUT"> <bitfield name="STAGE0_FG_ALPHA" pos="1" type="boolean"/> <bitfield name="STAGE1_FG_ALPHA" pos="2" type="boolean"/>
@@ -375,7 +389,7 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <reg32 offset="0x110" name="GC_LUT_BASE"/> </array> - <array offset="0x04600" name="DSPP" length="3" stride="0x400"> + <array doffsets="mdp5_cfg->dspp.base[0],mdp5_cfg->dspp.base[1],mdp5_cfg->dspp.base[2],mdp5_cfg->dspp.base[3]" name="DSPP" length="4" stride="0x400"> <reg32 offset="0x000" name="OP_MODE"> <bitfield name="IGC_LUT_EN" pos="0" type="boolean"/> <bitfield name="IGC_TBL_IDX" low="1" high="3" type="uint"/>
@@ -398,7 +412,7 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <reg32 offset="0x2b0" name="GC_BASE"/> </array> - <array offset="0x12500" name="INTF" length="4" stride="0x200"> + <array doffsets="mdp5_cfg->intf.base[0],mdp5_cfg->intf.base[1],mdp5_cfg->intf.base[2],mdp5_cfg->intf.base[3],mdp5_cfg->intf.base[4]" name="INTF" length="5" stride="0x200"> <reg32 offset="0x000" name="TIMING_ENGINE_EN"/> <reg32 offset="0x004" name="CONFIG"/> <reg32 offset="0x008" name="HSYNC_CTL">
@@ -460,7 +474,7 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <reg32 offset="0x11c" name="TPG_RGB_MAPPING"/> </array> - <array offset="0x13100" name="AD" length="2" stride="0x200"> + <array doffsets="mdp5_cfg->ad.base[0],mdp5_cfg->ad.base[1]" name="AD" length="2" stride="0x200"> <reg32 offset="0x000" name="BYPASS"/> <reg32 offset="0x004" name="CTRL_0"/> <reg32 offset="0x008" name="CTRL_1"/>
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation
Rob Clark
AppliedQuoted 3 lines · Stephane Viau
This patchset is intended to be used on top of Rob's wip changes in the 'variable-bases' branch. Dynamic offsets are introduced for MDP5 register description in order to support multiple versions (v.1.3 added here).
oh, right, I guess I need to fix up the debug stuff broken by that branch and get things merged back to master
I've queued up your patches on the variable-bases branch for now. Thanks
BR,
-R
Quoted 13 lines
Stephane Viau (2):
WIP: rnndb: movereg_.. bitset definitions to common MDP xml file
WIP: rnndb: add support for MDP5 v1.3 using dynamic offsetsrnndb/mdp/mdp4.xml | 10 ---------- rnndb/mdp/mdp5.xml | 30 ++++++++++++++++++++++-------- rnndb/mdp/mdp_common.xml | 10 ++++++++++ 3 files changed, 32 insertions(+), 18 deletions(-)--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation