ARM: remove the sub-node and deprecated supports-highspeed property for dwmmc.
Subsystems (4)
Jaehoon Chung
maintainerv5 cover ARM: remove the sub-node and deprecated supports-highspeed property for dwmmc.
Since used the mmc_of_parse(), didn't parse the sub-node.
So we can remove the sub-node, because almost SoC used the only one card per a host. And supports-highspeed can be replaced to "cap-mmc/sd-highspeed" property.
Changelog V5:
- Rebased on v3.16-rc4.
- Add Acked-by.
Changelog V4:
- Fix the checkpatch error.
Changelog V3:
- Fix the wrong bus-width value.
- Use the slot->host->quirks instead of brq->quirks.
- Add tested-by and reviewd-by.
Changelog V2:
- Add the "mmc: dw_mmc: replace "disable-wp" from slot's quirks to host's quirk"
Jaehoon Chung (5):
mmc: dw_mmc: modify the dt-binding for removing slot-node and
supports-highspeed
ARM: dts: exynos: unuse the slot-node and deprecated the
supports-highspeed for dw-mmc
ARM: dts: socfpga: unuse the slot-node and deprecated the
supports-highspeed for dw-mmc
ARM: dts: rockchip: unuse the slot-node and deprecated the
supports-highspeed for dw-mmc
mmc: dw_mmc: replace "disable-wp" from slot's quirk to host's quirk
.../devicetree/bindings/mmc/exynos-dw-mshc.txt | 17 ++++--------- .../devicetree/bindings/mmc/k3-dw-mshc.txt | 12 ++++----- .../devicetree/bindings/mmc/synopsys-dw-mshc.txt | 12 ++++----- arch/arm/boot/dts/exynos4412-odroidx.dts | 8 ++---- arch/arm/boot/dts/exynos4412-origen.dts | 8 ++---- arch/arm/boot/dts/exynos4412-trats2.dts | 8 ++---- arch/arm/boot/dts/exynos5250-arndale.dts | 18 ++++---------- arch/arm/boot/dts/exynos5250-cros-common.dtsi | 26 ++++++-------------- arch/arm/boot/dts/exynos5250-smdk5250.dts | 18 ++++---------- arch/arm/boot/dts/exynos5250-snow.dts | 6 ++--- arch/arm/boot/dts/exynos5260-xyref5260.dts | 18 ++++---------- arch/arm/boot/dts/exynos5410-smdk5410.dts | 18 ++++---------- arch/arm/boot/dts/exynos5420-arndale-octa.dts | 16 +++--------- arch/arm/boot/dts/exynos5420-peach-pit.dts | 16 +++--------- arch/arm/boot/dts/exynos5420-smdk5420.dts | 16 +++--------- arch/arm/boot/dts/exynos5800-peach-pi.dts | 16 +++--------- arch/arm/boot/dts/rk3066a-bqcurie2.dts | 16 +++--------- arch/arm/boot/dts/socfpga_arria5.dtsi | 9 +++---- arch/arm/boot/dts/socfpga_cyclone5.dtsi | 9 +++---- arch/arm/boot/dts/socfpga_vt.dts | 9 +++---- drivers/mmc/host/dw_mmc.c | 12 ++++----- 21 files changed, 84 insertions(+), 204 deletions(-)
Signature · 1 line
1.7.9.5
Jaehoon Chung
maintainerPATCH v5 1/5 mmc: dw_mmc: modify the dt-binding for removing slot-node and supports-highspeed
Almost Soc is used the slot per a host.
Don't use the slot-node and deprecated the "supports-highsped" property. Instead, use the cap-mmc/sd-highspeed.
Signed-off-by Jaehoon Chung <[email protected]>
Reviewed-by Tushar Behera <[email protected]>
Reviewed-by Ulf Hansson <[email protected]>
Tested-by Sachin Kamat <[email protected]>
Acked-by Seungwon Jeon <[email protected]>
--- .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 17 +++++------------ .../devicetree/bindings/mmc/k3-dw-mshc.txt | 12 +++++------- .../devicetree/bindings/mmc/synopsys-dw-mshc.txt | 12 +++++------- 3 files changed, 15 insertions(+), 26 deletions(-)
Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +5 -12
@@ -46,13 +46,14 @@ Required Properties: - if CIU clock divider value is 0 (that is divide by 1), both tx and rx phase shift clocks should be 0. -Required properties for a slot: +Required properties for a slot (Deprecated - Recommend to use one slot per a host): * gpios: specifies a list of gpios used for command, clock and data bus. The first gpio is the command line and the second gpio is the clock line. The rest of the gpios (depending on the bus-width property) are the data lines in no particular order. The format of the gpio specifier depends on the gpio controller. + (Deprecated - Refer to Documentaion/devicetree/binding/pinctrl/samsung-pinctrl.txt) Example:
@@ -69,21 +70,13 @@ Example: dwmmc0 at 12200000 { num-slots = <1>; - supports-highspeed; + cap-mmc-highspeed; + cap-sd-highspeed; broken-cd; fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; - - slot at 0 { - reg = <0>; - bus-width = <8>; - gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, - <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, - <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>, - <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, - <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>; - }; + bus-width = <8>; };
Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt +5 -7
@@ -34,13 +34,11 @@ Example: num-slots = <1>; vmmc-supply = <&ldo12>; fifo-depth = <0x100>; - supports-highspeed; pinctrl-names = "default"; pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>; - slot at 0 { - reg = <0>; - bus-width = <4>; - disable-wp; - cd-gpios = <&gpio10 3 0>; - }; + bus-width = <4>; + disable-wp; + cd-gpios = <&gpio10 3 0>; + cap-mmc-highspeed; + cap-sd-highspeed; };
Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +5 -7
@@ -67,7 +67,8 @@ Optional properties: * card-detect-delay: Delay in milli-seconds before detecting card after card insert event. The default value is 0. -* supports-highspeed: Enables support for high speed cards (up to 50MHz) +* supports-highspeed (DEPRECATED): Enables support for high speed cards (up to 50MHz) + (use "cap-mmc-highspeed" or "cap-sd-highspeed" instead) * broken-cd: as documented in mmc core bindings.
@@ -98,14 +99,11 @@ board specific portions as listed below. clock-frequency = <400000000>; clock-freq-min-max = <400000 200000000>; num-slots = <1>; - supports-highspeed; broken-cd; fifo-depth = <0x80>; card-detect-delay = <200>; vmmc-supply = <&buck8>; - - slot at 0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; + cap-sd-highspeed; };
Signature · 1 line
1.7.9.5
Jaehoon Chung
maintainerPATCH v5 2/5 ARM: dts: exynos: unuse the slot-node and deprecated the supports-highspeed for dw-mmc
In reply to Jaehoon Chungdw-mmc controller can support multiple slots.
But, there are no use-cases anywhere. So we don't need to support the slot-node for dw-mmc controller.
And "supports-highspeed" property in dw-mmc is deprecated. "supports-highspeed" property can be replaced to "cap-sd/mmc-highspeed".
Signed-off-by Jaehoon Chung <[email protected]>
Reviewed-by Tushar Behera <[email protected]>
Reviewed-by Ulf Hansson <[email protected]>
Tested-by Sachin Kamat <[email protected]>
Acked-by Seungwon Jeon <[email protected]>
Acked-by Kukjin Kim <[email protected]>
--- arch/arm/boot/dts/exynos4412-odroidx.dts | 8 ++------ arch/arm/boot/dts/exynos4412-origen.dts | 8 ++------ arch/arm/boot/dts/exynos4412-trats2.dts | 8 ++------ arch/arm/boot/dts/exynos5250-arndale.dts | 18 +++++------------ arch/arm/boot/dts/exynos5250-cros-common.dtsi | 26 +++++++------------------ arch/arm/boot/dts/exynos5250-smdk5250.dts | 18 +++++------------ arch/arm/boot/dts/exynos5250-snow.dts | 6 ++---- arch/arm/boot/dts/exynos5260-xyref5260.dts | 18 +++++------------ arch/arm/boot/dts/exynos5410-smdk5410.dts | 18 +++++------------ arch/arm/boot/dts/exynos5420-arndale-octa.dts | 16 ++++----------- arch/arm/boot/dts/exynos5420-peach-pit.dts | 16 ++++----------- arch/arm/boot/dts/exynos5420-smdk5420.dts | 16 ++++----------- arch/arm/boot/dts/exynos5800-peach-pi.dts | 16 ++++----------- 13 files changed, 51 insertions(+), 141 deletions(-)
arch/arm/boot/dts/exynos4412-odroidx.dts +2 -6
@@ -45,17 +45,13 @@ status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; - - slot at 0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; regulator_p3v3 {
arch/arm/boot/dts/exynos4412-origen.dts +2 -6
@@ -137,17 +137,13 @@ status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; - - slot at 0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; codec at 13400000 {
arch/arm/boot/dts/exynos4412-trats2.dts +2 -6
@@ -520,7 +520,6 @@ mmc at 12550000 { num-slots = <1>; - supports-highspeed; broken-cd; non-removable; card-detect-delay = <200>;
@@ -532,11 +531,8 @@ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; status = "okay"; - - slot at 0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; serial at 13800000 {
arch/arm/boot/dts/exynos5250-arndale.dts +5 -13
@@ -401,7 +401,6 @@ mmc_0: mmc at 12200000 { status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>;
@@ -410,17 +409,13 @@ vmmc-supply = <&mmc_reg>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot at 0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; mmc_2: mmc at 12220000 { status = "okay"; num-slots = <1>; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>;
@@ -428,12 +423,9 @@ vmmc-supply = <&mmc_reg>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot at 0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; }; i2s0: i2s at 03830000 {
arch/arm/boot/dts/exynos5250-cros-common.dtsi +7 -19
@@ -248,7 +248,6 @@ mmc at 12200000 { num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>;
@@ -256,44 +255,33 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; - - slot at 0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; mmc at 12220000 { num-slots = <1>; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot at 0 { - reg = <0>; - bus-width = <4>; - wp-gpios = <&gpc2 1 0>; - }; + bus-width = <4>; + wp-gpios = <&gpc2 1 0>; + cap-sd-highspeed; }; mmc at 12230000 { num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; /* See board-specific dts files for pin setup */ - - slot at 0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-sd-highspeed; }; spi_1: spi at 12d30000 {
arch/arm/boot/dts/exynos5250-smdk5250.dts +5 -13
@@ -282,7 +282,6 @@ mmc at 12200000 { status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>;
@@ -290,29 +289,22 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot at 0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; mmc at 12220000 { status = "okay"; num-slots = <1>; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot at 0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; }; spi_1: spi at 12d30000 {
arch/arm/boot/dts/exynos5250-snow.dts +2 -4
@@ -329,10 +329,8 @@ */ mmc at 12230000 { status = "okay"; - slot at 0 { - pinctrl-names = "default"; - pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; - }; + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; }; i2c at 12CD0000 {
arch/arm/boot/dts/exynos5260-xyref5260.dts +5 -13
@@ -69,7 +69,7 @@ num-slots = <1>; broken-cd; bypass-smu; - supports-highspeed; + cap-mmc-highspeed; supports-hs200-mode; /* 200 Mhz */ card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>;
@@ -77,27 +77,19 @@ samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; - - slot at 0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; }; &mmc_2 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-sd-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; - - slot at 0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; };
arch/arm/boot/dts/exynos5410-smdk5410.dts +5 -13
@@ -40,33 +40,25 @@ &mmc_0 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-mmc-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; - - slot at 0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; }; &mmc_2 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-sd-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; - - slot at 0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; &uart0 {
arch/arm/boot/dts/exynos5420-arndale-octa.dts +4 -12
@@ -50,7 +50,6 @@ mmc at 12200000 { status = "okay"; broken-cd; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>;
@@ -58,16 +57,12 @@ pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; vmmc-supply = <&ldo10_reg>; - - slot at 0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; mmc at 12220000 { status = "okay"; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>;
@@ -75,11 +70,8 @@ pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; vmmc-supply = <&ldo10_reg>; - - slot at 0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-mmc-highspeed; }; hsi2c_4: i2c at 12CA0000 {
arch/arm/boot/dts/exynos5420-peach-pit.dts +4 -12
@@ -155,7 +155,7 @@ num-slots = <1>; broken-cd; caps2-mmc-hs200-1_8v; - supports-highspeed; + cap-mmc-highspeed; non-removable; card-detect-delay = <200>; clock-frequency = <400000000>;
@@ -164,17 +164,13 @@ samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot at 0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; }; &mmc_2 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-sd-highspeed; card-detect-delay = <200>; clock-frequency = <400000000>; samsung,dw-mshc-ciu-div = <3>;
@@ -182,11 +178,7 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot at 0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; }; &hsi2c_7 {
arch/arm/boot/dts/exynos5420-smdk5420.dts +4 -12
@@ -76,34 +76,26 @@ mmc at 12200000 { status = "okay"; broken-cd; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot at 0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; mmc at 12220000 { status = "okay"; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot at 0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-sd-highspeed; }; dp-controller at 145B0000 {
arch/arm/boot/dts/exynos5800-peach-pi.dts +4 -12
@@ -139,7 +139,7 @@ num-slots = <1>; broken-cd; caps2-mmc-hs200-1_8v; - supports-highspeed; + cap-mmc-highspeed; non-removable; card-detect-delay = <200>; clock-frequency = <400000000>;
@@ -148,17 +148,13 @@ samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot at 0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; }; &mmc_2 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-sd-highspeed; card-detect-delay = <200>; clock-frequency = <400000000>; samsung,dw-mshc-ciu-div = <3>;
@@ -166,11 +162,7 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot at 0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; }; &dp {
Signature · 1 line
1.7.9.5
Jaehoon Chung
maintainerPATCH v5 3/5 ARM: dts: socfpga: unuse the slot-node and deprecated the supports-highspeed for dw-mmc
In reply to Jaehoon Chungdw-mmc controller can support multiple slots.
But, there are no use-cases anywhere. So we don't need to support the slot-node for dw-mmc controller.
And "supports-highspeed" property in dw-mmc is deprecated. "supports-highspeed" property can be replaced to "cap-sd/mmc-highspeed".
Signed-off-by Jaehoon Chung <[email protected]>
Reviewed-by Tushar Behera <[email protected]>
Reviewed-by Ulf Hansson <[email protected]>
Acked-by Seungwon Jeon <[email protected]>
--- arch/arm/boot/dts/socfpga_arria5.dtsi | 9 +++------ arch/arm/boot/dts/socfpga_cyclone5.dtsi | 9 +++------ arch/arm/boot/dts/socfpga_vt.dts | 9 +++------ 3 files changed, 9 insertions(+), 18 deletions(-)
arch/arm/boot/dts/socfpga_arria5.dtsi +3 -6
@@ -29,13 +29,10 @@ dwmmc0 at ff704000 { num-slots = <1>; - supports-highspeed; broken-cd; - - slot at 0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; }; sysmgr at ffd08000 {
arch/arm/boot/dts/socfpga_cyclone5.dtsi +3 -6
@@ -30,13 +30,10 @@ dwmmc0 at ff704000 { num-slots = <1>; - supports-highspeed; broken-cd; - - slot at 0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; }; ethernet at ff702000 {
arch/arm/boot/dts/socfpga_vt.dts +3 -6
@@ -43,13 +43,10 @@ dwmmc0 at ff704000 { num-slots = <1>; - supports-highspeed; broken-cd; - - slot at 0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; }; ethernet at ff700000 {
Signature · 1 line
1.7.9.5
PATCH v5 3/5 ARM: dts: socfpga: unuse the slot-node and deprecated the supports-highspeed for dw-mmc
Quoted 69 lines · Jaehoon Chung
dw-mmc controller can support multiple slots.
But, there are no use-cases anywhere. So we don't need to support the slot-node for dw-mmc controller.
And "supports-highspeed" property in dw-mmc is deprecated. "supports-highspeed" property can be replaced to "cap-sd/mmc-highspeed".Signed-off-by Jaehoon Chung <[email protected]>Reviewed-by Tushar Behera <[email protected]>Reviewed-by Ulf Hansson <[email protected]>Acked-by Seungwon Jeon <[email protected]>--- arch/arm/boot/dts/socfpga_arria5.dtsi | 9 +++------ arch/arm/boot/dts/socfpga_cyclone5.dtsi | 9 +++------ arch/arm/boot/dts/socfpga_vt.dts | 9 +++------ 3 files changed, 9 insertions(+), 18 deletions(-)arch/arm/boot/dts/socfpga_arria5.dtsi +3
-6@@ -29,13 +29,10 @@ dwmmc0 at ff704000 { num-slots = <1>; - supports-highspeed; broken-cd; - - slot at 0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; }; sysmgr at ffd08000 {arch/arm/boot/dts/socfpga_cyclone5.dtsi +3
-6@@ -30,13 +30,10 @@ dwmmc0 at ff704000 { num-slots = <1>; - supports-highspeed; broken-cd; - - slot at 0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; }; ethernet at ff702000 {arch/arm/boot/dts/socfpga_vt.dts +0
-2@@ -43,13 +43,10 @@ dwmmc0 at ff704000 { num-slots = <1>; - supports-highspeed; broken-cd; -
arch/arm/boot/dts/socfpga_vt.dts line 52
Quoted 10 lines
arch/arm/boot/dts/socfpga_vt.dts +3
-4- slot at 0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; }; ethernet at ff700000 {
Acked-by Dinh Nguyen <[email protected]>
Thanks,
Dinh
Jaehoon Chung
maintainerPATCH v5 4/5 ARM: dts: rockchip: unuse the slot-node and deprecated the supports-highspeed for dw-mmc
In reply to Jaehoon Chungdw-mmc controller can support multiple slots.
But, there are no use-cases anywhere. So we don't need to support the slot-node for dw-mmc controller.
And "supports-highspeed" property in dw-mmc is deprecated. "supports-highspeed" property can be replaced to "cap-sd/mmc-highspeed".
Signed-off-by Jaehoon Chung <[email protected]>
Reviewed-by Tushar Behera <[email protected]>
Reviewed-by Ulf Hansson <[email protected]>
Reviewed-by Heiko Stuebner <[email protected]>
Acked-by Seungwon Jeon <[email protected]>
--- arch/arm/boot/dts/rk3066a-bqcurie2.dts | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-)
arch/arm/boot/dts/rk3066a-bqcurie2.dts +4 -12
@@ -59,12 +59,8 @@ pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>; vmmc-supply = <&vcc_sd0>; - - slot at 0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; dwmmc at 10218000 { /* wifi */
@@ -74,12 +70,8 @@ pinctrl-names = "default"; pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; - - slot at 0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; gpio-keys {
Signature · 1 line
1.7.9.5
Jaehoon Chung
maintainerPATCH v5 5/5 mmc: dw_mmc: replace "disable-wp" from slot's quirk to host's quirk
In reply to Jaehoon ChungReplaced the "disable-wp" into host's quirks. (Because the slot-node is removed at dt-file.)
Signed-off-by Jaehoon Chung <[email protected]>
Tested-by Sachin Kamat <[email protected]>
Acked-by Seungwon Jeon <[email protected]>
--- drivers/mmc/host/dw_mmc.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)
drivers/mmc/host/dw_mmc.c +5 -7
@@ -997,7 +997,7 @@ static int dw_mci_get_ro(struct mmc_host *mmc)int gpio_ro =mmc_gpio_get_ro (mmc);/* Use platform get_ro function, else try on board write protect */ -if (slot->quirks &DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT ) +if (slot->host->quirks &DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT ) read_only =0 ;else if (!IS_ERR_VALUE (gpio_ro)) read_only = gpio_ro;
@@ -2006,12 +2006,7 @@ static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)static struct dw_mci_of_slot_quirks {char *quirk;int id; -} of_slot_quirks[] = { - { - .quirk ="disable-wp" , - .id =DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT , - }, -}; +} of_slot_quirks[] = {};static int dw_mci_of_get_slot_quirks (struct device *dev,u8 slot) {
@@ -2238,6 +2233,9 @@ static struct dw_mci_of_quirks { { .quirk = "broken-cd", .id = DW_MCI_QUIRK_BROKEN_CARD_DETECTION, + }, { + .quirk = "disable-wp", + .id = DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT, }, };
Signature · 1 line
1.7.9.5