Skip to contentSkip to conversation

regulator: s2mps11: Update module description and Kconfig to add S2MPU02 support

PATCH Applied Axel Lin 2 participants 2 messages Jul 23, 2014 – Jul 25, 2014

Subsystems (2)
Voltage and current regulator framework Samsung multifunction PMIC device drivers
lore
Share & tools
lore

Axel Lin

author
#0 lore raw

PATCH 1/1 regulator: s2mps11: Update module description and Kconfig to add S2MPU02 support

This driver also supports S2MPU02 now, thus update module description and Kconfig accordingly.

Signed-off-by Axel Lin <[email protected]>
---
 drivers/regulator/Kconfig   | 4 ++--
 drivers/regulator/s2mps11.c | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)
drivers/regulator/Kconfig +2 -2
index f5040fc..2dc8289 100644
@@ -467,10 +467,10 @@ config REGULATOR_S2MPA01
 	 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
 
 config REGULATOR_S2MPS11
-	tristate "Samsung S2MPS11/S2MPS14 voltage regulator"
+	tristate "Samsung S2MPS11/S2MPS14/S2MPU02 voltage regulator"
 	depends on MFD_SEC_CORE
 	help
-	 This driver supports a Samsung S2MPS11/S2MPS14 voltage output
+	 This driver supports a Samsung S2MPS11/S2MPS14/S2MPU02 voltage output
 	 regulator via I2C bus. The chip is comprised of high efficient Buck
 	 converters including Dual-Phase Buck converter, Buck-Boost converter,
 	 various LDOs.
drivers/regulator/s2mps11.c +1 -1
index 2daacc6..b16c53a 100644
@@ -1045,5 +1045,5 @@ module_exit(s2mps11_pmic_exit);
 
 /* Module information */
 MODULE_AUTHOR("Sangbeom Kim <[email protected]>");
-MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14 Regulator Driver");
+MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14/S2MPU02 Regulator Driver");
 MODULE_LICENSE("GPL");
Signature · 1 line
1.9.1
maintainer Applied
#1 lore raw
Quoted 2 lines · Axel Lin

This driver also supports S2MPU02 now, thus update module description and Kconfig accordingly.

Applied, thanks.