iio: adc: Add TI ADC128S052
Subsystems (2)
PATCH v4 1/1 iio: adc: Add TI ADC128S052
This patch adds support for ADC128S052 from TI.
Signed-off-by Angelo Compagnucci <[email protected]>
---
* Fixed spi_set_drvdata(spi, indio_dev); in adc128_probe.
drivers/iio/adc/Kconfig | 10 +++ drivers/iio/adc/Makefile | 1 + drivers/iio/adc/ti-adc128s052.c | 179 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 190 insertions(+) create mode 100644 drivers/iio/adc/ti-adc128s052.c
drivers/iio/adc/Kconfig +10 -0
@@ -216,6 +216,16 @@ config TI_ADC081C This driver can also be built as a module. If so, the module will be called ti-adc081c. +config TI_ADC128S052 + tristate "Texas Instruments ADC128S052" + depends on SPI + help + If you say yes here you get support for Texas Instruments ADC128S052 + chip. + + This driver can also be built as a module. If so, the module will be + called ti-adc128s052. + config TI_AM335X_ADC tristate "TI's AM335X ADC driver" depends on MFD_TI_AM335X_TSCADC
drivers/iio/adc/Makefile +1 -0
@@ -23,6 +23,7 @@ obj-$(CONFIG_MCP3422) += mcp3422.o obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o obj-$(CONFIG_NAU7802) += nau7802.o obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o +obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o obj-$(CONFIG_TWL6030_GPADC) += twl6030-gpadc.o
drivers/iio/adc/ti-adc128s052.c new file +179 -0
179 lines not on this page · raw message
Signature · 1 line
2.0.3
Quoted 4 lines · Angelo Compagnucci
This patch adds support for ADC128S052 from TI.
Signed-off-by Angelo Compagnucci <[email protected]>---
Sorry, one more issue in adc128_read_raw() which I should have spotted already reviewing your V2.
Quoted 103 lines
* Fixed
spi_set_drvdata(spi, indio_dev); inadc128_probe.drivers/iio/adc/Kconfig | 10 +++ drivers/iio/adc/Makefile | 1 + drivers/iio/adc/ti-adc128s052.c | 179 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 190 insertions(+) create mode 100644 drivers/iio/adc/ti-adc128s052.cdrivers/iio/adc/Kconfig +10
-0@@ -216,6 +216,16 @@ config TI_ADC081C This driver can also be built as a module. If so, the module will be called ti-adc081c. +config TI_ADC128S052 + tristate "Texas Instruments ADC128S052" + depends on SPI + help + If you say yes here you get support for Texas Instruments ADC128S052 + chip. + + This driver can also be built as a module. If so, the module will be + called ti-adc128s052. + config TI_AM335X_ADC tristate "TI's AM335X ADC driver" depends on MFD_TI_AM335X_TSCADCdrivers/iio/adc/Makefile +1
-0@@ -23,6 +23,7 @@ obj-$(CONFIG_MCP3422) += mcp3422.o obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o obj-$(CONFIG_NAU7802) += nau7802.o obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o +obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o obj-$(CONFIG_TWL6030_GPADC) += twl6030-gpadc.odrivers/iio/adc/ti-adc128s052.c new file +55
-0@@ -0,0 +1,179 @@ +/* +* Copyright (C) 2014 Angelo Compagnucci <[email protected]> +* +* Driver for Texas Instruments' ADC128S052 ADC chip. +* Datasheet can be found here: +* http://www.ti.com/lit/ds/symlink/adc128s052.pdf +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/err.h> +#include <linux/spi/spi.h> +#include <linux/module.h> +#include <linux/iio/iio.h> +#include <linux/regulator/consumer.h> + +struct adc128 { +struct spi_device *spi; + +struct regulator *reg; +struct mutex lock; + +u8 buffer[2 ]____cacheline_aligned ; +}; + +static int adc128_adc_conversion (struct adc128 *adc,u8 channel) +{ +int ret; + +mutex_lock (&adc->lock); + + adc->buffer[0 ] = channel <<3 ; + adc->buffer[1 ] =0 ; + + ret =spi_write (adc->spi, &adc->buffer,2 ); +if (ret <0 ) { +mutex_unlock (&adc->lock); +return ret; + } + + ret =spi_read (adc->spi, &adc->buffer,2 ); + +mutex_unlock (&adc->lock); + +if (ret <0 ) +return ret; + +return ((adc->buffer[0 ] <<8 | adc->buffer[1 ]) &0xFFF ); +} + +static int adc128_read_raw (struct iio_dev *indio_dev, +struct iio_chan_spec const *channel,int *val, +int *val2,long mask)
drivers/iio/adc/ti-adc128s052.c line 65
Quoted 10 lines
drivers/iio/adc/ti-adc128s052.c new file +10
-0+{ +struct adc128 *adc =iio_priv (indio_dev); +int ret; + +switch (mask) { +case IIO_CHAN_INFO_RAW : + + ret =adc128_adc_conversion (adc, channel->channel); +if (ret <0 ) +return -EINVAL ;
return ret; to pass the error code up.
drivers/iio/adc/ti-adc128s052.c line 74
Quoted 9 lines
drivers/iio/adc/ti-adc128s052.c new file +9
-0+ + *val = ret; +return IIO_VAL_INT ; + +case IIO_CHAN_INFO_SCALE : + + ret =regulator_get_voltage (adc->reg); +if (ret <0 ) +return -EINVAL ;
Same here: return ret;
Quoted 105 lines
drivers/iio/adc/ti-adc128s052.c new file +105
-0+ + *val = ret /1000 ; + *val2 =12 ; +return IIO_VAL_FRACTIONAL_LOG2 ; + +default : +return -EINVAL ; + } + +} + +#define ADC128_VOLTAGE_CHANNEL (num) \ + { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = (num), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ + } + +static const struct iio_chan_spec adc128_channels[] = { +ADC128_VOLTAGE_CHANNEL (0 ), +ADC128_VOLTAGE_CHANNEL (1 ), +ADC128_VOLTAGE_CHANNEL (2 ), +ADC128_VOLTAGE_CHANNEL (3 ), +ADC128_VOLTAGE_CHANNEL (4 ), +ADC128_VOLTAGE_CHANNEL (5 ), +ADC128_VOLTAGE_CHANNEL (6 ), +ADC128_VOLTAGE_CHANNEL (7 ), +}; + +static const struct iio_info adc128_info = { + .read_raw = adc128_read_raw, + .driver_module =THIS_MODULE , +}; + +static int adc128_probe (struct spi_device *spi) +{ +struct iio_dev *indio_dev; +struct adc128 *adc; +int ret; + + indio_dev =devm_iio_device_alloc (&spi->dev,sizeof (*adc)); +if (!indio_dev) +return -ENOMEM ; + + adc =iio_priv (indio_dev); + adc->spi = spi; + +spi_set_drvdata (spi, indio_dev); + + indio_dev->dev.parent = &spi->dev; + indio_dev->name =spi_get_device_id (spi)->name; + indio_dev->modes =INDIO_DIRECT_MODE ; + indio_dev->info = &adc128_info; + + indio_dev->channels = adc128_channels; + indio_dev->num_channels =ARRAY_SIZE (adc128_channels); + + adc->reg =devm_regulator_get (&spi->dev,"vref" ); +if (IS_ERR (adc->reg)) +return PTR_ERR (adc->reg); + + ret =regulator_enable (adc->reg); +if (ret <0 ) +return ret; + +mutex_init (&adc->lock); + + ret =iio_device_register (indio_dev); + +return ret; +} + +static int adc128_remove (struct spi_device *spi) +{ +struct iio_dev *indio_dev =spi_get_drvdata (spi); +struct adc128 *adc =iio_priv (indio_dev); + +iio_device_unregister (indio_dev); +regulator_disable (adc->reg); + +return 0 ; +} + +static const struct spi_device_id adc128_id[] = { + {"adc128s052" ,0 }, + { } +}; +MODULE_DEVICE_TABLE (spi, adc128_id); + +static struct spi_driver adc128_driver = { + .driver = { + .name ="adc128s052" , + .owner =THIS_MODULE , + }, + .probe = adc128_probe, + .remove = adc128_remove, + .id_table = adc128_id, +}; +module_spi_driver (adc128_driver); + +MODULE_AUTHOR ("Angelo Compagnucci <[email protected]>" ); +MODULE_DESCRIPTION ("Texas Instruments ADC128S052" ); +MODULE_LICENSE ("GPL v2" );