Skip to contentSkip to conversation

Problems with rtl8192cu driver (disassociated from ... (Reason: 2))

DISCUSSION Manuel Reimer 2 participants 4 messages Aug 2, 2014 – Aug 3, 2014

lore
Share & tools
lore
#0 lore raw

Hello,

I'm trying to get access to a WLAN access point using the following adapter:

<http://www.edimax.com/edimax/merchandise/merchandise_detail/data/edimax/global/wireless_adapters_n150/ew-7811un>

I've used "NetworkManager" to connect to the access point and everything seemed to work well at first.

But after a few minutes the connection is lost with the following message in dmesg:

wlan0: disassociated from XX:XX:XX:XX:XX:XX (Reason: 2)

If I restart NetworkManager, then the connection works again, but only for a few minutes before I get another disconnect.

I even tried to do a permanent ping to a server on the Internet (to have permanent traffic) but this doesn't change anything. I still get disconnected with "Reason 2".

Are there known problems with the rtl8192cu driver?

Can someone here recommend a small USB WLAN adapter which is known to work without problems?

Thank you very much in advance.

Greetings

Manuel

#1 lore raw
Quoted 23 lines · Manuel Reimer

Hello,

I'm trying to get access to a WLAN access point using the following adapter:

<http://www.edimax.com/edimax/merchandise/merchandise_detail/data/edimax/global/wireless_adapters_n150/ew-7811un>

I've used "NetworkManager" to connect to the access point and everything seemed to work well at first.

But after a few minutes the connection is lost with the following message in dmesg:

wlan0: disassociated from XX:XX:XX:XX:XX:XX (Reason: 2)

If I restart NetworkManager, then the connection works again, but only for a few minutes before I get another disconnect.

I even tried to do a permanent ping to a server on the Internet (to have permanent traffic) but this doesn't change anything. I still get disconnected with "Reason 2".

Are there known problems with the rtl8192cu driver?

Quoted 9 lines

Can someone here recommend a small USB WLAN adapter which is known to work without problems?

Thank you very much in advance.

Greetings

Manuel

I had a similar problem with this driver. After a while, the aggregation session seems to hang. If I connect as b/g, no problem. If I disable aggregation by patching the driver, again the problem goes away.

That's as far as I got.

Steve

#2 lore raw
Quoted 1 line · Steve Brown

I had a similar problem with this driver.

Thank you very much for this feedback.

Searching for 'rtl8192cu "Reason 2"' on the net reveals more cases for such problems. For example:

https://dev.openwrt.org/ticket/15342
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1220007
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=661860

So in other words: Seems like rtl8192cu driver is broken.

And as I am unable to fix it, I'll have to try to find a WLAN interface with better Linux support.

Quoted 3 lines

After a while, the aggregation
session seems to hang. If I connect as b/g, no problem. If I disable aggregation by patching the driver, again the problem goes away.

What exactly is "b/g"?

Greetings,

Manuel

#3 lore raw
Quoted 8 lines · Manuel Reimer
Quoted 1 line · Steve Brown

I had a similar problem with this driver.

Thank you very much for this feedback.

Searching for 'rtl8192cu "Reason 2"' on the net reveals more cases for such problems. For example:

Quoted 7 lines

https://dev.openwrt.org/ticket/15342
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1220007
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=661860

What exactly is "b/g"?

I was referring to the 802.11b and 802.11g IEEE lan standards.

Quoted 4 lines

Greetings,

Manuel