Skip to contentSkip to conversation

Add 180 degree primary and sprite rotation

PATCH In review [email protected] 2 participants 10 messages Aug 6, 2014

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v2 cover Add 180 degree primary and sprite rotation

From: Sonika Jindal <[email protected]>

This patchset provides support for 0/180 degree hardare rotaion for primary and sprite planes. The rotation property is now made global and is part of drm_mode_config. It is attached to different planes.

v2: Moving the creation of property back to i915 (Ville) and resetting property after disabling plane (Ville)

v3: Adding reviewed-by tags and removing dri-devel list from cc for i915 code change

Sonika Jindal (3):
drm: Add rotation_property to mode_config drm/i915: Add 180 degree primary plane rotation support
drm: Resetting rotation property

Ville Syrjälä (3):
drm/i915: Add 180 degree sprite rotation support drm/i915: Make intel_plane_restore() return an error drm/i915: Add rotation property for sprites

 drivers/gpu/drm/drm_fb_helper.c      |    9 ++-
 drivers/gpu/drm/i915/i915_reg.h      |    4 ++
 drivers/gpu/drm/i915/intel_display.c |  109 ++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/intel_drv.h     |    3 +-
 drivers/gpu/drm/i915/intel_pm.c      |    6 ++
 drivers/gpu/drm/i915/intel_sprite.c  |   93 ++++++++++++++++++++++++++---
 include/drm/drm_crtc.h               |    1 +
 7 files changed, 211 insertions(+), 14 deletions(-)
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH v2 1/6 drm/i915: Add 180 degree sprite rotation support

From: Ville Syrjälä <[email protected]>

The sprite planes (in fact all display planes starting from gen4) support 180 degree rotation. Add the relevant low level bits to the sprite code to make use of that feature.

The upper layers are not yet plugged in.

v2: HSW handles the rotated buffer offset automagically

v3: BDW also handles the rotated buffer offset automagically

Testcase: igt/kms_rotation_crc

---
 drivers/gpu/drm/i915/i915_reg.h     |    3 +++
 drivers/gpu/drm/i915/intel_drv.h    |    1 +
 drivers/gpu/drm/i915/intel_sprite.c |   38 +++++++++++++++++++++++++++++++++++
 3 files changed, 42 insertions(+)
drivers/gpu/drm/i915/i915_reg.h +3 -0
index dc13961..1ece0c3 100644
@@ -4218,6 +4218,7 @@ enum punit_power_well {
 #define   DVS_YUV_ORDER_UYVY	(1<<16)
 #define   DVS_YUV_ORDER_YVYU	(2<<16)
 #define   DVS_YUV_ORDER_VYUY	(3<<16)
+#define   DVS_ROTATE_180	(1<<15)
 #define   DVS_DEST_KEY		(1<<2)
 #define   DVS_TRICKLE_FEED_DISABLE (1<<14)
 #define   DVS_TILED		(1<<10)
@@ -4288,6 +4289,7 @@ enum punit_power_well {
 #define   SPRITE_YUV_ORDER_UYVY		(1<<16)
 #define   SPRITE_YUV_ORDER_YVYU		(2<<16)
 #define   SPRITE_YUV_ORDER_VYUY		(3<<16)
+#define   SPRITE_ROTATE_180		(1<<15)
 #define   SPRITE_TRICKLE_FEED_DISABLE	(1<<14)
 #define   SPRITE_INT_GAMMA_ENABLE	(1<<13)
 #define   SPRITE_TILED			(1<<10)
@@ -4361,6 +4363,7 @@ enum punit_power_well {
 #define   SP_YUV_ORDER_UYVY		(1<<16)
 #define   SP_YUV_ORDER_YVYU		(2<<16)
 #define   SP_YUV_ORDER_VYUY		(3<<16)
+#define   SP_ROTATE_180			(1<<15)
 #define   SP_TILED			(1<<10)
 #define _SPALINOFF		(VLV_DISPLAY_BASE + 0x72184)
 #define _SPASTRIDE		(VLV_DISPLAY_BASE + 0x72188)
drivers/gpu/drm/i915/intel_drv.h +1 -0
index 28d185d..bd915f4 100644
@@ -447,6 +447,7 @@ struct intel_plane {
 	unsigned int crtc_w, crtc_h;
 	uint32_t src_x, src_y;
 	uint32_t src_w, src_h;
+	unsigned int rotation;
 
 	/* Since we need to change the watermarks before/after
 	 * enabling/disabling the planes, we need to store the parameters here
drivers/gpu/drm/i915/intel_sprite.c +38 -0
index d34a569..f4d10c4 100644
@@ -164,6 +164,7 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
 	sprctl &= ~SP_PIXFORMAT_MASK;
 	sprctl &= ~SP_YUV_BYTE_ORDER_MASK;
 	sprctl &= ~SP_TILED;
+	sprctl &= ~SP_ROTATE_180;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_YUYV:
@@ -236,6 +237,14 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
 							fb->pitches[0]);
 	linear_offset -= sprsurf_offset;
 
+	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+		sprctl |= SP_ROTATE_180;
+
+		x += src_w;
+		y += src_h;
+		linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+	}
+
 	atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
 
 	intel_update_primary_plane(intel_crtc);
@@ -365,6 +374,7 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	sprctl &= ~SPRITE_RGB_ORDER_RGBX;
 	sprctl &= ~SPRITE_YUV_BYTE_ORDER_MASK;
 	sprctl &= ~SPRITE_TILED;
+	sprctl &= ~SPRITE_ROTATE_180;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_XBGR8888:
@@ -427,6 +437,18 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 					       pixel_size, fb->pitches[0]);
 	linear_offset -= sprsurf_offset;
 
+	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+		sprctl |= SPRITE_ROTATE_180;
+
+		/* HSW and BDW does this automagically in hardware */
+		if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
+			x += src_w;
+			y += src_h;
+			linear_offset += src_h * fb->pitches[0] +
+				src_w * pixel_size;
+		}
+	}
+
 	atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
 
 	intel_update_primary_plane(intel_crtc);
@@ -572,6 +594,7 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	dvscntr &= ~DVS_RGB_ORDER_XBGR;
 	dvscntr &= ~DVS_YUV_BYTE_ORDER_MASK;
 	dvscntr &= ~DVS_TILED;
+	dvscntr &= ~DVS_ROTATE_180;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_XBGR8888:
@@ -629,6 +652,14 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 					       pixel_size, fb->pitches[0]);
 	linear_offset -= dvssurf_offset;
 
+	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+		dvscntr |= DVS_ROTATE_180;
+
+		x += src_w;
+		y += src_h;
+		linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+	}
+
 	atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
 
 	intel_update_primary_plane(intel_crtc);
@@ -896,6 +927,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	max_scale = intel_plane->max_downscale << 16;
 	min_scale = intel_plane->can_scale ? 1 : (1 << 16);
 
+	drm_rect_rotate(&src, fb->width << 16, fb->height << 16,
+			intel_plane->rotation);
+
 	hscale = drm_rect_calc_hscale_relaxed(&src, &dst, min_scale, max_scale);
 	BUG_ON(hscale < 0);
 
@@ -934,6 +968,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 				     drm_rect_width(&dst) * hscale - drm_rect_width(&src),
 				     drm_rect_height(&dst) * vscale - drm_rect_height(&src));
 
+		drm_rect_rotate_inv(&src, fb->width << 16, fb->height << 16,
+				    intel_plane->rotation);
+
 		/* sanity check to make sure the src viewport wasn't enlarged */
 		WARN_ON(src.x1 < (int) src_x ||
 			src.y1 < (int) src_y ||
@@ -1311,6 +1348,7 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 
 	intel_plane->pipe = pipe;
 	intel_plane->plane = plane;
+	intel_plane->rotation = BIT(DRM_ROTATE_0);
 	possible_crtcs = (1 << pipe);
 	ret = drm_plane_init(dev, &intel_plane->base, possible_crtcs,
 			     &intel_plane_funcs,
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

PATCH v2 2/6 drm/i915: Make intel_plane_restore() return an error

In reply to [email protected]

From: Ville Syrjälä <[email protected]>

Propagate the error from intel_update_plane() up through intel_plane_restore() to the caller. This will be used for rollback purposes when setting properties fails.

---
 drivers/gpu/drm/i915/intel_drv.h    |    2 +-
 drivers/gpu/drm/i915/intel_sprite.c |   14 +++++++-------
 2 files changed, 8 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/intel_drv.h +1 -1
index bd915f4..a2c369f 100644
@@ -1084,7 +1084,7 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob);
 int intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane);
 void intel_flush_primary_plane(struct drm_i915_private *dev_priv,
 			       enum plane plane);
-void intel_plane_restore(struct drm_plane *plane);
+int intel_plane_restore(struct drm_plane *plane);
 void intel_plane_disable(struct drm_plane *plane);
 int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
 			      struct drm_file *file_priv);
drivers/gpu/drm/i915/intel_sprite.c +7 -7
index f4d10c4..6118262 100644
@@ -1218,18 +1218,18 @@ out_unlock:
 	return ret;
 }
 
-void intel_plane_restore(struct drm_plane *plane)
+int intel_plane_restore(struct drm_plane *plane)
 {
 	struct intel_plane *intel_plane = to_intel_plane(plane);
 
 	if (!plane->crtc || !plane->fb)
-		return;
+		return 0;
 
-	intel_update_plane(plane, plane->crtc, plane->fb,
-			   intel_plane->crtc_x, intel_plane->crtc_y,
-			   intel_plane->crtc_w, intel_plane->crtc_h,
-			   intel_plane->src_x, intel_plane->src_y,
-			   intel_plane->src_w, intel_plane->src_h);
+	return intel_update_plane(plane, plane->crtc, plane->fb,
+				  intel_plane->crtc_x, intel_plane->crtc_y,
+				  intel_plane->crtc_w, intel_plane->crtc_h,
+				  intel_plane->src_x, intel_plane->src_y,
+				  intel_plane->src_w, intel_plane->src_h);
 }
 
 void intel_plane_disable(struct drm_plane *plane)
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

PATCH v2 3/6 drm: Add rotation_property to mode_config

In reply to [email protected]

From: Sonika Jindal <[email protected]>

---
 include/drm/drm_crtc.h |    1 +
 1 file changed, 1 insertion(+)
include/drm/drm_crtc.h +1 -0
index f1105d0..62f73bd 100644
@@ -821,6 +821,7 @@ struct drm_mode_config {
 	struct drm_property *dpms_property;
 	struct drm_property *path_property;
 	struct drm_property *plane_type_property;
+	struct drm_property *rotation_property;
 
 	/* DVI-I properties */
 	struct drm_property *dvi_i_subconnector_property;
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

PATCH v2 4/6 drm/i915: Add rotation property for sprites

In reply to [email protected]

From: Ville Syrjälä <[email protected]>

Sprite planes support 180 degree rotation. The lower layers are now in place, so hook in the standard rotation property to expose the feature to the users.

v2: Moving rotation_property to mode_config

---
 drivers/gpu/drm/i915/intel_sprite.c |   41 ++++++++++++++++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_sprite.c +40 -1
index 6118262..0bdb00b 100644
@@ -1218,6 +1218,30 @@ out_unlock:
 	return ret;
 }
 
+static int intel_plane_set_property(struct drm_plane *plane,
+				    struct drm_property *prop,
+				    uint64_t val)
+{
+	struct drm_device *dev = plane->dev;
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	uint64_t old_val;
+	int ret = -ENOENT;
+
+	if (prop == dev->mode_config.rotation_property) {
+		/* exactly one rotation angle please */
+		if (hweight32(val & 0xf) != 1)
+			return -EINVAL;
+
+		old_val = intel_plane->rotation;
+		intel_plane->rotation = val;
+		ret = intel_plane_restore(plane);
+		if (ret)
+			intel_plane->rotation = old_val;
+	}
+
+	return ret;
+}
+
 int intel_plane_restore(struct drm_plane *plane)
 {
 	struct intel_plane *intel_plane = to_intel_plane(plane);
@@ -1244,6 +1268,7 @@ static const struct drm_plane_funcs intel_plane_funcs = {
 	.update_plane = intel_update_plane,
 	.disable_plane = intel_disable_plane,
 	.destroy = intel_destroy_plane,
+	.set_property = intel_plane_set_property,
 };
 
 static uint32_t ilk_plane_formats[] = {
@@ -1354,8 +1379,22 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 			     &intel_plane_funcs,
 			     plane_formats, num_plane_formats,
 			     false);
-	if (ret)
+	if (ret) {
 		kfree(intel_plane);
+		goto out;
+	}
+
+	if (!dev->mode_config.rotation_property)
+		dev->mode_config.rotation_property =
+			drm_mode_create_rotation_property(dev,
+							  BIT(DRM_ROTATE_0) |
+							  BIT(DRM_ROTATE_180));
+
+	if (dev->mode_config.rotation_property)
+		drm_object_attach_property(&intel_plane->base.base,
+					   dev->mode_config.rotation_property,
+					   intel_plane->rotation);
 
+ out:
 	return ret;
 }
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

PATCH v2 5/6 drm/i915: Add 180 degree primary plane rotation support

In reply to [email protected]

From: Sonika Jindal <[email protected]>

Primary planes support 180 degree rotation. Expose the feature through rotation drm property.

v2: Calculating linear/tiled offsets based on pipe source width and height. Added 180 degree rotation support in ironlake_update_plane.

v3: Checking if CRTC is active before issueing update_plane. Added wait for vblank to make sure we dont overtake page flips. Disabling FBC since it does not work with rotated planes.

v4: Updated rotation checks for pending flips, fbc disable. Creating rotation property only for Gen4 onwards. Property resetting as part of lastclose.

v5: Resetting property in i915_driver_lastclose properly for planes and crtcs. Fixed linear offset calculation that was off by 1 w.r.t width in i9xx_update_plane and ironlake_update_plane. Removed tab based indentation and unnecessary braces in intel_crtc_set_property and intel_update_fbc. FBC and flip related checks should be done only for valid crtcs.

v6: Minor nits in FBC disable checks for comments in intel_crtc_set_property and positioning the disable code in intel_update_fbc.

v7: In case rotation property on inactive crtc is updated, we return successfully printing debug log as crtc is inactive and only property change is preserved.

v8: update_plane is changed to update_primary_plane, crtc->fb is changed to crtc->primary->fb and return value of update_primary_plane is ignored.

v9: added rotation property to primary plane instead of crtc. Removing reset of rotation property from lastclose. rotation_property is moved to drm_mode_config, so drm layer will take care of resetting. Adding updation of fbc when rotation is set to 0. Allowing rotation only if value is different than old one.

Testcase: igt/kms_rotation_crc

---
 drivers/gpu/drm/i915/i915_reg.h      |    1 +
 drivers/gpu/drm/i915/intel_display.c |  109 ++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/intel_pm.c      |    6 ++
 3 files changed, 112 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +1 -0
index 1ece0c3..b4527ab 100644
@@ -4134,6 +4134,7 @@ enum punit_power_well {
 #define   DISPPLANE_NO_LINE_DOUBLE		0
 #define   DISPPLANE_STEREO_POLARITY_FIRST	0
 #define   DISPPLANE_STEREO_POLARITY_SECOND	(1<<18)
+#define   DISPPLANE_ROTATE_180         (1<<15)
 #define   DISPPLANE_TRICKLE_FEED_DISABLE	(1<<14) /* Ironlake */
 #define   DISPPLANE_TILED			(1<<10)
 #define _DSPAADDR				0x70184
drivers/gpu/drm/i915/intel_display.c +105 -4

178 lines not on this page · raw message

drivers/gpu/drm/i915/intel_pm.c +6 -0
index 684dc5f..d789e5f 100644
@@ -581,6 +581,12 @@ void intel_update_fbc(struct drm_device *dev)
 			DRM_DEBUG_KMS("framebuffer not tiled or fenced, disabling compression\n");
 		goto out_disable;
 	}
+	if (INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) &&
+	    to_intel_plane(crtc->primary)->rotation != BIT(DRM_ROTATE_0)) {
+		if (set_no_fbc_reason(dev_priv, FBC_UNSUPPORTED_MODE))
+			DRM_DEBUG_KMS("Rotation unsupported, disabling\n");
+		goto out_disable;
+	}
 
 	/* If the kernel debugger is active, always disable compression */
 	if (in_dbg_master())
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw

PATCH v2 6/6 drm: Resetting rotation property

In reply to [email protected]

From: Sonika Jindal <[email protected]>

Reset rotation property to 0.

v2: Resetting after disabling the plane

---
 drivers/gpu/drm/drm_fb_helper.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/gpu/drm/drm_fb_helper.c +8 -1
index 3144db9..d139edd 100644
@@ -345,10 +345,17 @@ static bool restore_fbdev_mode(struct drm_fb_helper *fb_helper)
 
 	drm_warn_on_modeset_not_all_locked(dev);
 
-	list_for_each_entry(plane, &dev->mode_config.plane_list, head)
+	list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
 		if (plane->type != DRM_PLANE_TYPE_PRIMARY)
 			drm_plane_force_disable(plane);
 
+		if (dev->mode_config.rotation_property) {
+			drm_object_property_set_value(&plane->base,
+					dev->mode_config.rotation_property,
+					BIT(DRM_ROTATE_0));
+		}
+	}
+
 	for (i = 0; i < fb_helper->crtc_count; i++) {
 		struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
 		struct drm_crtc *crtc = mode_set->crtc;
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#7 lore raw

Re: [PATCH 6/6] drm: Resetting rotation property

Quoted 8 lines · On Wed, Aug 06, 2014 at 09:55:27AM +0530, [email protected] wrote:

From: Sonika Jindal <[email protected]>

Reset rotation property to 0.

v2: Resetting after disabling the plane

Still missing a cc: dri-devel here. And please don't resend the entire series again, just this patch to dri-devel. The patches are merged already, but we must follow proper procedures for getting core drm patches in.

Thanks, Daniel

Quoted 34 lines
---
 drivers/gpu/drm/drm_fb_helper.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/gpu/drm/drm_fb_helper.c +8 -1
index 3144db9..d139edd 100644
@@ -345,10 +345,17 @@ static bool restore_fbdev_mode(struct drm_fb_helper *fb_helper)
 
 	drm_warn_on_modeset_not_all_locked(dev);
 
-	list_for_each_entry(plane, &dev->mode_config.plane_list, head)
+	list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
 		if (plane->type != DRM_PLANE_TYPE_PRIMARY)
 			drm_plane_force_disable(plane);
 
+		if (dev->mode_config.rotation_property) {
+			drm_object_property_set_value(&plane->base,
+					dev->mode_config.rotation_property,
+					BIT(DRM_ROTATE_0));
+		}
+	}
+
 	for (i = 0; i < fb_helper->crtc_count; i++) {
 		struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
 		struct drm_crtc *crtc = mode_set->crtc;
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
#8 lore raw

PATCH v2 6/6 drm: Resetting rotation property

From: Sonika Jindal <[email protected]>

Reset rotation property to 0.

v2: Resetting after disabling the plane

---
 drivers/gpu/drm/drm_fb_helper.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/gpu/drm/drm_fb_helper.c +8 -1
index 3144db9..d139edd 100644
@@ -345,10 +345,17 @@ static bool restore_fbdev_mode(struct drm_fb_helper *fb_helper)
 
 	drm_warn_on_modeset_not_all_locked(dev);
 
-	list_for_each_entry(plane, &dev->mode_config.plane_list, head)
+	list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
 		if (plane->type != DRM_PLANE_TYPE_PRIMARY)
 			drm_plane_force_disable(plane);
 
+		if (dev->mode_config.rotation_property) {
+			drm_object_property_set_value(&plane->base,
+					dev->mode_config.rotation_property,
+					BIT(DRM_ROTATE_0));
+		}
+	}
+
 	for (i = 0; i < fb_helper->crtc_count; i++) {
 		struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
 		struct drm_crtc *crtc = mode_set->crtc;
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#9 lore raw

Re: [PATCH 6/6] drm: Resetting rotation property

Quoted 9 lines · On Wed, Aug 06, 2014 at 01:26:00PM +0530, [email protected] wrote:

From: Sonika Jindal <[email protected]>

Reset rotation property to 0.

v2: Resetting after disabling the plane

I've pulled in these 2 simple drm core rotation patches into dinq with Dave's ack for 3.18.
-Daniel

Quoted 34 lines
---
 drivers/gpu/drm/drm_fb_helper.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/gpu/drm/drm_fb_helper.c +8 -1
index 3144db9..d139edd 100644
@@ -345,10 +345,17 @@ static bool restore_fbdev_mode(struct drm_fb_helper *fb_helper)
 
 	drm_warn_on_modeset_not_all_locked(dev);
 
-	list_for_each_entry(plane, &dev->mode_config.plane_list, head)
+	list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
 		if (plane->type != DRM_PLANE_TYPE_PRIMARY)
 			drm_plane_force_disable(plane);
 
+		if (dev->mode_config.rotation_property) {
+			drm_object_property_set_value(&plane->base,
+					dev->mode_config.rotation_property,
+					BIT(DRM_ROTATE_0));
+		}
+	}
+
 	for (i = 0; i < fb_helper->crtc_count; i++) {
 		struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
 		struct drm_crtc *crtc = mode_set->crtc;
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch