Skip to contentSkip to conversation

ARM: atmel: use pcr to control clock

PATCH New Bo Shen 2 participants 9 messages Aug 6, 2014 – Sep 19, 2014

Subsystems (5)
lore
Share & tools
lore

Bo Shen

author
#0 lore raw

cover ARM: atmel: use pcr to control clock

When the SoC has pcr (peripheral control register), then switch to use it to enable or disable clock.

Bo Shen (4):
ARM: atmel: use pcr to enable or disable peripheral clock
ARM: atmel: add pcr related definition
USB: ohci-at91: use pcr to enable or disable clock
USB: ehci-atmel: use pcr to enable or disable clock

 arch/arm/cpu/armv7/at91/clock.c           | 24 ++++++++++++++++++++----
 arch/arm/include/asm/arch-at91/at91_pmc.h |  6 +++++-
 arch/arm/include/asm/arch-at91/clk.h      |  1 +
 arch/arm/include/asm/arch-at91/sama5d3.h  |  1 +
 drivers/usb/host/ehci-atmel.c             |  8 ++++++++
 drivers/usb/host/ohci-at91.c              |  8 ++++----
 6 files changed, 39 insertions(+), 9 deletions(-)
Signature · 1 line
1.8.5.2
author
#1 lore raw

PATCH 1/4 ARM: atmel: use pcr to enable or disable peripheral clock

When use pcr (peripheral control register), then we won't need to care about the peripheral ID.

---

 arch/arm/cpu/armv7/at91/clock.c           | 24 ++++++++++++++++++++----
 arch/arm/include/asm/arch-at91/at91_pmc.h |  4 ++++
 arch/arm/include/asm/arch-at91/clk.h      |  1 +
 3 files changed, 25 insertions(+), 4 deletions(-)
arch/arm/cpu/armv7/at91/clock.c +20 -4
index 1588e0c..36ed4a6 100644
@@ -114,9 +114,25 @@ int at91_clock_init(unsigned long main_clock)
 void at91_periph_clk_enable(int id)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	u32 regval;
 
-	if (id > 31)
-		writel(1 << (id - 32), &pmc->pcer1);
-	else
-		writel(1 << id, &pmc->pcer);
+	if (id > AT91_PMC_PCR_PID_MASK)
+		return;
+
+	regval = AT91_PMC_PCR_EN | AT91_PMC_PCR_CMD_WRITE | id;
+
+	writel(regval, &pmc->pcr);
+}
+
+void at91_periph_clk_disable(int id)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	u32 regval;
+
+	if (id > AT91_PMC_PCR_PID_MASK)
+		return;
+
+	regval = AT91_PMC_PCR_CMD_WRITE | id;
+
+	writel(regval, &pmc->pcr);
 }
arch/arm/include/asm/arch-at91/at91_pmc.h +4 -0
index 04f6239..bef5793 100644
@@ -147,6 +147,10 @@ typedef struct at91_pmc {
 #define AT91_PMC_IXR_PCKRDY3		0x00000800
 #define AT91_PMC_IXR_MOSCSELS		0x00010000
 
+#define AT91_PMC_PCR_PID_MASK		(0x3f)
+#define AT91_PMC_PCR_CMD_WRITE		(0x1 << 12)
+#define AT91_PMC_PCR_EN			(0x1 << 28)
+
 #define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
 #define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
 #define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
arch/arm/include/asm/arch-at91/clk.h +1 -0
index ce9e28f..4076a78 100644
@@ -80,4 +80,5 @@ static inline unsigned long get_mci_clk_rate(void)
 
 int at91_clock_init(unsigned long main_clock);
 void at91_periph_clk_enable(int id);
+void at91_periph_clk_disable(int id);
 #endif /* __ASM_ARM_ARCH_CLK_H__ */
Signature · 1 line
1.8.5.2
#2 lore raw

PATCH 1/4 ARM: atmel: use pcr to enable or disable peripheral clock

Dear Bo Shen,

Quoted 10 lines · Bo Shen

When use pcr (peripheral control register), then we won't need to care about the peripheral ID.

---

arch/arm/cpu/armv7/at91/clock.c           | 24 ++++++++++++++++++++----
arch/arm/include/asm/arch-at91/at91_pmc.h |  4 ++++
arch/arm/include/asm/arch-at91/clk.h      |  1 +
3 files changed, 25 insertions(+), 4 deletions(-)

applied to u-boot-atmel/master, thanks!

Best regards,
Andreas Bie?mann

author
#3 lore raw

PATCH 2/4 ARM: atmel: add pcr related definition

In reply to Bo Shen

Using CPU_HAS_PCR micro to present the SoC has pcr (peripheral control register).

---

 arch/arm/include/asm/arch-at91/at91_pmc.h | 2 +-
 arch/arm/include/asm/arch-at91/sama5d3.h  | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)
arch/arm/include/asm/arch-at91/at91_pmc.h +1 -1
index bef5793..27331ff 100644
@@ -54,7 +54,7 @@ typedef struct at91_pmc {
 	u32	reserved5[21];
 	u32	wpmr;		/* 0xE4 Write Protect Mode Register (CAP0) */
 	u32	wpsr;		/* 0xE8 Write Protect Status Register (CAP0) */
-#ifdef CONFIG_SAMA5D3
+#ifdef CPU_HAS_PCR
 	u32	reserved6[8];
 	u32	pcer1;		/* 0x100 Periperial Clock Enable Register 1 */
 	u32	pcdr1;		/* 0x104 Periperial Clock Disable Register 1 */
arch/arm/include/asm/arch-at91/sama5d3.h +1 -0
index 6d936f4..f7bc4ad 100644
@@ -188,6 +188,7 @@
 #define ATMEL_PIO_PORTS		5
 #define CPU_HAS_PIO3
 #define PIO_SCDR_DIV		0x3fff
+#define CPU_HAS_PCR
 
 /*
  * PMECC table in ROM
Signature · 1 line
1.8.5.2
#4 lore raw

PATCH 2/4 ARM: atmel: add pcr related definition

Dear Bo Shen,

Quoted 9 lines · Bo Shen

Using CPU_HAS_PCR micro to present the SoC has pcr (peripheral control register).

---

arch/arm/include/asm/arch-at91/at91_pmc.h | 2 +-
arch/arm/include/asm/arch-at91/sama5d3.h | 1 +

2 files changed, 2 insertions(+), 1 deletion(-)

applied to u-boot-atmel/master, thanks!

Best regards,
Andreas Bie?mann

author
#5 lore raw

PATCH 3/4 USB: ohci-at91: use pcr to enable or disable clock

In reply to Bo Shen

If the SoC has pcr, we use pcr (peripheral control register) to enable or disable clock.

---

 drivers/usb/host/ohci-at91.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/usb/host/ohci-at91.c +4 -4
index c24505e..820e2e5 100644
@@ -38,8 +38,8 @@ int usb_cpu_init(void)
 #endif
 
 	/* Enable USB host clock. */
-#ifdef CONFIG_SAMA5D3
-	writel(1 << (ATMEL_ID_UHP - 32), &pmc->pcer1);
+#ifdef CPU_HAS_PCR
+	at91_periph_clk_enable(ATMEL_ID_UHP);
 #else
 	writel(1 << ATMEL_ID_UHP, &pmc->pcer);
 #endif
@@ -58,8 +58,8 @@ int usb_cpu_stop(void)
 	at91_pmc_t *pmc	= (at91_pmc_t *)ATMEL_BASE_PMC;
 
 	/* Disable USB host clock. */
-#ifdef CONFIG_SAMA5D3
-	writel(1 << (ATMEL_ID_UHP - 32), &pmc->pcdr1);
+#ifdef CPU_HAS_PCR
+	at91_periph_clk_disable(ATMEL_ID_UHP);
 #else
 	writel(1 << ATMEL_ID_UHP, &pmc->pcdr);
 #endif
Signature · 1 line
1.8.5.2
#6 lore raw

PATCH 3/4 USB: ohci-at91: use pcr to enable or disable clock

Dear Bo Shen,

Quoted 8 lines · Bo Shen

If the SoC has pcr, we use pcr (peripheral control register) to enable or disable clock.

---

drivers/usb/host/ohci-at91.c | 8 ++++----

1 file changed, 4 insertions(+), 4 deletions(-)

applied to u-boot-atmel/master, thanks!

Best regards,
Andreas Bie?mann

author
#7 lore raw

PATCH 4/4 USB: ehci-atmel: use pcr to enable or disable clock

In reply to Bo Shen

If the SoC has pcr, we use pcr (peripheral control register) to enable or disable clock.

---

 drivers/usb/host/ehci-atmel.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/usb/host/ehci-atmel.c +8 -0
index 9ffe501..9a8f004 100644
@@ -40,7 +40,11 @@ int ehci_hcd_init(int index, enum usb_init_type init,
 	}
 
 	/* Enable USB Host clock */
+#ifdef CPU_HAS_PCR
+	at91_periph_clk_enable(ATMEL_ID_UHPHS);
+#else
 	writel(1 << ATMEL_ID_UHPHS, &pmc->pcer);
+#endif
 
 	*hccr = (struct ehci_hccr *)ATMEL_BASE_EHCI;
 	*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
@@ -55,7 +59,11 @@ int ehci_hcd_stop(int index)
 	ulong start_time, tmp_time;
 
 	/* Disable USB Host Clock */
+#ifdef CPU_HAS_PCR
+	at91_periph_clk_disable(ATMEL_ID_UHPHS);
+#else
 	writel(1 << ATMEL_ID_UHPHS, &pmc->pcdr);
+#endif
 
 	start_time = get_timer(0);
 	/* Disable UTMI PLL */
Signature · 1 line
1.8.5.2
#8 lore raw

PATCH 4/4 USB: ehci-atmel: use pcr to enable or disable clock

Dear Bo Shen,

Quoted 8 lines · Bo Shen

If the SoC has pcr, we use pcr (peripheral control register) to enable or disable clock.

---

drivers/usb/host/ehci-atmel.c | 8 ++++++++

1 file changed, 8 insertions(+)

applied to u-boot-atmel/master, thanks!

Best regards,
Andreas Bie?mann