Add BDW workarounds to golden render state
Subsystems (2)
From: Arun Siluvery <[email protected]>
In this patch workarounds for BDW are applied to golden render state. Only those registers that are part of register state are added to this batch. Remaining workarounds are still in its current place init_clock_gating() which are not affected by a gpu reset. I can send another patch where they can be moved to render ring init function but during testing I found their state doesn't change after reset, please give your comments on this.
Arun Siluvery (1):
drm/i915/bdw: Apply workarounds to the golden render state
drivers/gpu/drm/i915/intel_pm.c | 50 --------------------- drivers/gpu/drm/i915/intel_renderstate_gen8.c | 62 +++++++++++++++++---------- 2 files changed, 39 insertions(+), 73 deletions(-)
Signature · 1 line
2.0.4
RFC 1/1 drm/i915/bdw: Apply workarounds to the golden render state
From: Arun Siluvery <[email protected]>
Workarounds for bdw are currently applied in init_clock_gating() but they are lost following a gpu reset. Some of the registers are part of register state context and they are restored with every context switch so initializing WAs in golden render state ensures that they are applied even when we start with an uninitialized context or during hw initialization followed by a reset.
--- drivers/gpu/drm/i915/intel_pm.c | 50 --------------------- drivers/gpu/drm/i915/intel_renderstate_gen8.c | 62 +++++++++++++++++---------- 2 files changed, 39 insertions(+), 73 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +0 -50
@@ -5402,38 +5402,11 @@ static void gen8_init_clock_gating(struct drm_device *dev)/* FIXME(BDW): Check all the w/a, some might only apply to * pre-production hw. */ -/* WaDisablePartialInstShootdown:bdw */ -I915_WRITE (GEN8_ROW_CHICKEN , -_MASKED_BIT_ENABLE (PARTIAL_INSTRUCTION_SHOOTDOWN_DISABLE )); - -/* WaDisableThreadStallDopClockGating:bdw */ -/* FIXME: Unclear whether we really need this on production bdw. */ -I915_WRITE (GEN8_ROW_CHICKEN , -_MASKED_BIT_ENABLE (STALL_DOP_GATING_DISABLE )); - -/* -* This GEN8_CENTROID_PIXEL_OPT_DIS W/A is only needed for -* pre-production hardware -*/ -I915_WRITE (HALF_SLICE_CHICKEN3 , -_MASKED_BIT_ENABLE (GEN8_CENTROID_PIXEL_OPT_DIS )); -I915_WRITE (HALF_SLICE_CHICKEN3 , -_MASKED_BIT_ENABLE (GEN8_SAMPLER_POWER_BYPASS_DIS ));I915_WRITE (GAMTARBMODE ,_MASKED_BIT_ENABLE (ARB_MODE_BWGTLB_DISABLE ));I915_WRITE (_3D_CHICKEN3,_MASKED_BIT_ENABLE (_3D_CHICKEN_SDE_LIMIT_FIFO_POLY_DEPTH (2 ))); -I915_WRITE (COMMON_SLICE_CHICKEN2 , -_MASKED_BIT_ENABLE (GEN8_CSC2_SBE_VUE_CACHE_CONSERVATIVE )); - -I915_WRITE (GEN7_HALF_SLICE_CHICKEN1 , -_MASKED_BIT_ENABLE (GEN7_SINGLE_SUBSCAN_DISPATCH_ENABLE )); - -/* WaDisableDopClockGating:bdw May not be needed for production */ -I915_WRITE (GEN7_ROW_CHICKEN2 , -_MASKED_BIT_ENABLE (DOP_CLOCK_GATING_DISABLE )); -/* WaSwitchSolVfFArbitrationPriority:bdw */ I915_WRITE (GAM_ECOCHK ,I915_READ (GAM_ECOCHK ) |HSW_ECOCHK_ARB_PRIO_SOL );
@@ -5448,41 +5421,18 @@ static void gen8_init_clock_gating(struct drm_device *dev) BDW_DPRS_MASK_VBLANK_SRD); } -/* Use Force Non-Coherent whenever executing a 3D context. This is a -* workaround for for a possible hang in the unlikely event a TLB -* invalidation occurs during a PSD flush. -*/ -I915_WRITE (HDC_CHICKEN0 , -I915_READ (HDC_CHICKEN0 ) | -_MASKED_BIT_ENABLE (HDC_FORCE_NON_COHERENT )); -/* WaVSRefCountFullforceMissDisable:bdw */ /* WaDSRefCountFullforceMissDisable:bdw */ I915_WRITE (GEN7_FF_THREAD_MODE ,I915_READ (GEN7_FF_THREAD_MODE ) & ~(GEN8_FF_DS_REF_CNT_FFME |GEN7_FF_VS_REF_CNT_FFME )); -/* -* BSpec recommends 8x4 when MSAA is used, -* however in practice 16x4 seems fastest. -* -* Note that PS/WM thread counts depend on the WIZ hashing -* disable bit, which we don't touch here, but it's good -* to keep in mind (see 3DSTATE_PS and 3DSTATE_WM). -*/ -I915_WRITE (GEN7_GT_MODE , -GEN6_WIZ_HASHING_MASK | GEN6_WIZ_HASHING_16x4); -I915_WRITE (GEN6_RC_SLEEP_PSMI_CONTROL ,_MASKED_BIT_ENABLE (GEN8_RC_SEMA_IDLE_MSG_DISABLE ));/* WaDisableSDEUnitClockGating:bdw */ I915_WRITE (GEN8_UCGCTL6 ,I915_READ (GEN8_UCGCTL6 ) |GEN8_SDEUNIT_CLOCK_GATE_DISABLE ); - -/* Wa4x4STCOptimizationDisable:bdw */ -I915_WRITE (CACHE_MODE_1 , -_MASKED_BIT_ENABLE (GEN8_4x4_STC_OPTIMIZATION_DISABLE)); }static void haswell_init_clock_gating (struct drm_device *dev)
drivers/gpu/drm/i915/intel_renderstate_gen8.c +39 -23
117 lines not on this page · raw message
Signature · 1 line
2.0.4
Re: [RFC] drm/i915/bdw: Apply workarounds to the golden render state
Quoted 7 lines · On Fri, Aug 08, 2014 at 10:52:57AM +0100, [email protected] wrote:
From: Arun Siluvery <[email protected]>
Workarounds for bdw are currently applied in
init_clock_gating()but they are lost following a gpu reset. Some of the registers are part of register state context and they are restored with every context switch so initializing WAs in golden render state ensures that they are applied even when we start with an uninitialized context or during hw initialization followed by a reset.
Interesting, but let's try to keep the opaque blobs minimal. The comments for w/a are even more valuable than the code. -Chris
Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
Re: [RFC] drm/i915/bdw: Apply workarounds to the golden render state
Quoted 11 lines · Chris Wilson
Quoted 7 lines · On Fri, Aug 08, 2014 at 10:52:57AM +0100, [email protected] wrote:
From: Arun Siluvery <[email protected]>
Workarounds for bdw are currently applied in
init_clock_gating()but they are lost following a gpu reset. Some of the registers are part of register state context and they are restored with every context switch so initializing WAs in golden render state ensures that they are applied even when we start with an uninitialized context or during hw initialization followed by a reset.Interesting, but let's try to keep the opaque blobs minimal. The comments for w/a are even more valuable than the code.
I agree, I will add comments to each workaround.
We are looking at augmenting workarounds to the null batch in render state setup function itself. Do you have any comments with that approach?
regards
Arun
Quoted 2 lines
-Chris
Re: [RFC] drm/i915/bdw: Apply workarounds to the golden render state
Quoted 10 lines · Arun
Quoted 9 lines · Chris Wilson
Quoted 7 lines · On Fri, Aug 08, 2014 at 10:52:57AM +0100, [email protected] wrote:
From: Arun Siluvery <[email protected]>
Workarounds for bdw are currently applied in
init_clock_gating()but they are lost following a gpu reset. Some of the registers are part of register state context and they are restored with every context switch so initializing WAs in golden render state ensures that they are applied even when we start with an uninitialized context or during hw initialization followed by a reset.
Quoted 6 lines
Quoted 2 lines
Interesting, but let's try to keep the opaque blobs minimal. The comments for w/a are even more valuable than the code.
I agree, I will add comments to each workaround.
We are looking at augmenting workarounds to the null batch in render state setup function itself. Do you have any comments with that approach?
Other than changing its name, that does actually seem like a useful juncture to do things since it is the first userspace operation on the RCS ring within that context. And if it has to be within the context, that is indeed more troublesome to do without adding to the renderstate. -Chris
Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
Re: [RFC] drm/i915/bdw: Apply workarounds to the golden render state
In reply to [email protected]Quoted 7 lines · On Fri, Aug 08, 2014 at 10:52:57AM +0100, [email protected] wrote:
From: Arun Siluvery <[email protected]>
Workarounds for bdw are currently applied in
init_clock_gating()but they are lost following a gpu reset. Some of the registers are part of register state context and they are restored with every context switch so initializing WAs in golden render state ensures that they are applied even when we start with an uninitialized context or during hw initialization followed by a reset.
This approach might require separate null states for BDW vs. CHV and IVB vs. HSW vs. VLV, which seems a bit unfortunate. Might be better to just issue the w/a register writes via LRIs from the code as part of the null state load.
Although I don't actually undertand how this improves things as opposed to just appllying the w/as via mmio writes. Does it?
Quoted 228 lines
Signed-off-by Arun Siluvery <[email protected]>--- drivers/gpu/drm/i915/intel_pm.c | 50 --------------------- drivers/gpu/drm/i915/intel_renderstate_gen8.c | 62 +++++++++++++++++---------- 2 files changed, 39 insertions(+), 73 deletions(-)drivers/gpu/drm/i915/intel_pm.c +0
-50@@ -5402,38 +5402,11 @@ static void gen8_init_clock_gating(struct drm_device *dev)/* FIXME(BDW): Check all the w/a, some might only apply to * pre-production hw. */ -/* WaDisablePartialInstShootdown:bdw */ -I915_WRITE (GEN8_ROW_CHICKEN , -_MASKED_BIT_ENABLE (PARTIAL_INSTRUCTION_SHOOTDOWN_DISABLE )); - -/* WaDisableThreadStallDopClockGating:bdw */ -/* FIXME: Unclear whether we really need this on production bdw. */ -I915_WRITE (GEN8_ROW_CHICKEN , -_MASKED_BIT_ENABLE (STALL_DOP_GATING_DISABLE )); - -/* -* This GEN8_CENTROID_PIXEL_OPT_DIS W/A is only needed for -* pre-production hardware -*/ -I915_WRITE (HALF_SLICE_CHICKEN3 , -_MASKED_BIT_ENABLE (GEN8_CENTROID_PIXEL_OPT_DIS )); -I915_WRITE (HALF_SLICE_CHICKEN3 , -_MASKED_BIT_ENABLE (GEN8_SAMPLER_POWER_BYPASS_DIS ));I915_WRITE (GAMTARBMODE ,_MASKED_BIT_ENABLE (ARB_MODE_BWGTLB_DISABLE ));I915_WRITE (_3D_CHICKEN3,_MASKED_BIT_ENABLE (_3D_CHICKEN_SDE_LIMIT_FIFO_POLY_DEPTH (2 ))); -I915_WRITE (COMMON_SLICE_CHICKEN2 , -_MASKED_BIT_ENABLE (GEN8_CSC2_SBE_VUE_CACHE_CONSERVATIVE )); - -I915_WRITE (GEN7_HALF_SLICE_CHICKEN1 , -_MASKED_BIT_ENABLE (GEN7_SINGLE_SUBSCAN_DISPATCH_ENABLE )); - -/* WaDisableDopClockGating:bdw May not be needed for production */ -I915_WRITE (GEN7_ROW_CHICKEN2 , -_MASKED_BIT_ENABLE (DOP_CLOCK_GATING_DISABLE )); -/* WaSwitchSolVfFArbitrationPriority:bdw */ I915_WRITE (GAM_ECOCHK ,I915_READ (GAM_ECOCHK ) |HSW_ECOCHK_ARB_PRIO_SOL );@@ -5448,41 +5421,18 @@ static void gen8_init_clock_gating(struct drm_device *dev) BDW_DPRS_MASK_VBLANK_SRD); } -/* Use Force Non-Coherent whenever executing a 3D context. This is a -* workaround for for a possible hang in the unlikely event a TLB -* invalidation occurs during a PSD flush. -*/ -I915_WRITE (HDC_CHICKEN0 , -I915_READ (HDC_CHICKEN0 ) | -_MASKED_BIT_ENABLE (HDC_FORCE_NON_COHERENT )); -/* WaVSRefCountFullforceMissDisable:bdw */ /* WaDSRefCountFullforceMissDisable:bdw */ I915_WRITE (GEN7_FF_THREAD_MODE ,I915_READ (GEN7_FF_THREAD_MODE ) & ~(GEN8_FF_DS_REF_CNT_FFME |GEN7_FF_VS_REF_CNT_FFME )); -/* -* BSpec recommends 8x4 when MSAA is used, -* however in practice 16x4 seems fastest. -* -* Note that PS/WM thread counts depend on the WIZ hashing -* disable bit, which we don't touch here, but it's good -* to keep in mind (see 3DSTATE_PS and 3DSTATE_WM). -*/ -I915_WRITE (GEN7_GT_MODE , -GEN6_WIZ_HASHING_MASK | GEN6_WIZ_HASHING_16x4); -I915_WRITE (GEN6_RC_SLEEP_PSMI_CONTROL ,_MASKED_BIT_ENABLE (GEN8_RC_SEMA_IDLE_MSG_DISABLE ));/* WaDisableSDEUnitClockGating:bdw */ I915_WRITE (GEN8_UCGCTL6 ,I915_READ (GEN8_UCGCTL6 ) |GEN8_SDEUNIT_CLOCK_GATE_DISABLE ); - -/* Wa4x4STCOptimizationDisable:bdw */ -I915_WRITE (CACHE_MODE_1 , -_MASKED_BIT_ENABLE (GEN8_4x4_STC_OPTIMIZATION_DISABLE)); }static void haswell_init_clock_gating (struct drm_device *dev)drivers/gpu/drm/i915/intel_renderstate_gen8.c +39
-23@@ -1,14 +1,38 @@#include "intel_renderstate.h" static const u32 gen8_null_state_relocs[] = { -0x00000048 , -0x00000050 , -0x00000060 , -0x000003ec , +0x000000a8 , +0x000000b0 , +0x000000c0 , +0x0000044c ,-1 , };static const u32 gen8_null_state_batch[] = { +0x11000001 , +0x0000e4f0 , +0x83208320 , +0x11000001 , +0x0000e4f4 , +0x00010001 , +0x11000001 , +0x0000e184 , +0x01020102 , +0x11000001 , +0x0000e100 , +0x04000400 , +0x11000001 , +0x00007014 , +0x00010001 , +0x11000001 , +0x00007300 , +0x00100010 , +0x11000001 , +0x00007004 , +0x00400040 , +0x11000001 , +0x00007008 , +0x02800200 ,0x69040000 ,0x61020001 ,0x00000000 ,@@ -40,9 +64,9 @@ static const u32 gen8_null_state_batch[] = {0xfffff001 ,0x00001001 ,0x78230000 , -0x000006e0 , +0x00000720 ,0x78210000 , -0x00000700 , +0x00000740 ,0x78300000 ,0x08010040 , 0x78330000,@@ -52,9 +76,9 @@ static const u32 gen8_null_state_batch[] = {0x78320000 ,0x08000000 ,0x78240000 , -0x00000641 , +0x00000681 ,0x780e0000 , -0x00000601 , +0x00000641 ,0x780d0000 ,0x00000000 , 0x78180000,@@ -199,9 +223,9 @@ static const u32 gen8_null_state_batch[] = {0x00000000 ,0x00000000 ,0x782a0000 , -0x00000480 , +0x000004c0 ,0x782f0000 , -0x00000540 , +0x00000580 ,0x78140000 ,0x00000800 , 0x78170009,@@ -216,7 +240,7 @@ static const u32 gen8_null_state_batch[] = {0x00000000 ,0x00000000 ,0x7820000a , -0x00000580 , +0x000005c0 ,0x00000000 ,0x08080000 , 0x00000000,@@ -232,7 +256,7 @@ static const u32 gen8_null_state_batch[] = {0x784f0000 ,0x80000100 ,0x780f0000 , -0x00000740 , +0x00000780 ,0x78050006 ,0x00000000 , 0x00000000,@@ -260,7 +284,7 @@ static const u32 gen8_null_state_batch[] = {0x00000000 ,0x78080003 ,0x00006000 , -0x000005e0 ,/* reloc */ +0x00000620 ,/* reloc */ 0x00000000 ,0x00000000 , 0x78090005,@@ -289,16 +313,8 @@ static const u32 gen8_null_state_batch[] = {0x00000000 ,0x00000000 ,0x00000000 , -0x00000000 , -0x00000000 , -0x00000000 , -0x00000000 , -0x00000000 , -0x00000000 , -0x00000000 , -0x00000000 , -0x000004c0 ,/* state start */ -0x00000500 , +0x00000500 ,/* state start */ +0x00000540 ,0x00000000 ,0x00000000 , 0x00000000,Signature · 6 lines
2.0.4 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 2 lines
Ville Syrjälä Intel OTC
Re: [RFC] drm/i915/bdw: Apply workarounds to the golden render state
Quoted 9 lines · Ville Syrjälä
Quoted 7 lines · On Fri, Aug 08, 2014 at 10:52:57AM +0100, [email protected] wrote:
From: Arun Siluvery <[email protected]>
Workarounds for bdw are currently applied in
init_clock_gating()but they are lost following a gpu reset. Some of the registers are part of register state context and they are restored with every context switch so initializing WAs in golden render state ensures that they are applied even when we start with an uninitialized context or during hw initialization followed by a reset.
Quoted 5 lines
This approach might require separate null states for BDW vs. CHV and IVB vs. HSW vs. VLV, which seems a bit unfortunate. Might be better to just issue the w/a register writes via LRIs from the code as part of the null state load.
Yes this is a better approach, I am currently changing the code to achieve this, not sure how easy it would be.
Quoted 3 lines
Although I don't actually undertand how this improves things as opposed to just appllying the w/as via mmio writes. Does it?
I observed random behaviour CACHE_MODE_1 which simply used to lose the applied workaround on first context switch even though it is loaded with inhibit==1; register values are not supposed to change but it was changing.
I think it is better to add them in null batch to ensure hardware starts with WAs applied.
regards
Arun
Quoted 229 lines
Quoted 228 lines
Signed-off-by Arun Siluvery <[email protected]>--- drivers/gpu/drm/i915/intel_pm.c | 50 --------------------- drivers/gpu/drm/i915/intel_renderstate_gen8.c | 62 +++++++++++++++++---------- 2 files changed, 39 insertions(+), 73 deletions(-)drivers/gpu/drm/i915/intel_pm.c +0
-50@@ -5402,38 +5402,11 @@ static void gen8_init_clock_gating(struct drm_device *dev)/* FIXME(BDW): Check all the w/a, some might only apply to * pre-production hw. */ -/* WaDisablePartialInstShootdown:bdw */ -I915_WRITE (GEN8_ROW_CHICKEN , -_MASKED_BIT_ENABLE (PARTIAL_INSTRUCTION_SHOOTDOWN_DISABLE )); - -/* WaDisableThreadStallDopClockGating:bdw */ -/* FIXME: Unclear whether we really need this on production bdw. */ -I915_WRITE (GEN8_ROW_CHICKEN , -_MASKED_BIT_ENABLE (STALL_DOP_GATING_DISABLE )); - -/* -* This GEN8_CENTROID_PIXEL_OPT_DIS W/A is only needed for -* pre-production hardware -*/ -I915_WRITE (HALF_SLICE_CHICKEN3 , -_MASKED_BIT_ENABLE (GEN8_CENTROID_PIXEL_OPT_DIS )); -I915_WRITE (HALF_SLICE_CHICKEN3 , -_MASKED_BIT_ENABLE (GEN8_SAMPLER_POWER_BYPASS_DIS ));I915_WRITE (GAMTARBMODE ,_MASKED_BIT_ENABLE (ARB_MODE_BWGTLB_DISABLE ));I915_WRITE (_3D_CHICKEN3,_MASKED_BIT_ENABLE (_3D_CHICKEN_SDE_LIMIT_FIFO_POLY_DEPTH (2 ))); -I915_WRITE (COMMON_SLICE_CHICKEN2 , -_MASKED_BIT_ENABLE (GEN8_CSC2_SBE_VUE_CACHE_CONSERVATIVE )); - -I915_WRITE (GEN7_HALF_SLICE_CHICKEN1 , -_MASKED_BIT_ENABLE (GEN7_SINGLE_SUBSCAN_DISPATCH_ENABLE )); - -/* WaDisableDopClockGating:bdw May not be needed for production */ -I915_WRITE (GEN7_ROW_CHICKEN2 , -_MASKED_BIT_ENABLE (DOP_CLOCK_GATING_DISABLE )); -/* WaSwitchSolVfFArbitrationPriority:bdw */ I915_WRITE (GAM_ECOCHK ,I915_READ (GAM_ECOCHK ) |HSW_ECOCHK_ARB_PRIO_SOL );@@ -5448,41 +5421,18 @@ static void gen8_init_clock_gating(struct drm_device *dev) BDW_DPRS_MASK_VBLANK_SRD); } -/* Use Force Non-Coherent whenever executing a 3D context. This is a -* workaround for for a possible hang in the unlikely event a TLB -* invalidation occurs during a PSD flush. -*/ -I915_WRITE (HDC_CHICKEN0 , -I915_READ (HDC_CHICKEN0 ) | -_MASKED_BIT_ENABLE (HDC_FORCE_NON_COHERENT )); -/* WaVSRefCountFullforceMissDisable:bdw */ /* WaDSRefCountFullforceMissDisable:bdw */ I915_WRITE (GEN7_FF_THREAD_MODE ,I915_READ (GEN7_FF_THREAD_MODE ) & ~(GEN8_FF_DS_REF_CNT_FFME |GEN7_FF_VS_REF_CNT_FFME )); -/* -* BSpec recommends 8x4 when MSAA is used, -* however in practice 16x4 seems fastest. -* -* Note that PS/WM thread counts depend on the WIZ hashing -* disable bit, which we don't touch here, but it's good -* to keep in mind (see 3DSTATE_PS and 3DSTATE_WM). -*/ -I915_WRITE (GEN7_GT_MODE , -GEN6_WIZ_HASHING_MASK | GEN6_WIZ_HASHING_16x4); -I915_WRITE (GEN6_RC_SLEEP_PSMI_CONTROL ,_MASKED_BIT_ENABLE (GEN8_RC_SEMA_IDLE_MSG_DISABLE ));/* WaDisableSDEUnitClockGating:bdw */ I915_WRITE (GEN8_UCGCTL6 ,I915_READ (GEN8_UCGCTL6 ) |GEN8_SDEUNIT_CLOCK_GATE_DISABLE ); - -/* Wa4x4STCOptimizationDisable:bdw */ -I915_WRITE (CACHE_MODE_1 , -_MASKED_BIT_ENABLE (GEN8_4x4_STC_OPTIMIZATION_DISABLE)); }static void haswell_init_clock_gating (struct drm_device *dev)drivers/gpu/drm/i915/intel_renderstate_gen8.c +39
-24@@ -1,14 +1,38 @@#include "intel_renderstate.h" static const u32 gen8_null_state_relocs[] = { -0x00000048 , -0x00000050 , -0x00000060 , -0x000003ec , +0x000000a8 , +0x000000b0 , +0x000000c0 , +0x0000044c ,-1 , };static const u32 gen8_null_state_batch[] = { +0x11000001 , +0x0000e4f0 , +0x83208320 , +0x11000001 , +0x0000e4f4 , +0x00010001 , +0x11000001 , +0x0000e184 , +0x01020102 , +0x11000001 , +0x0000e100 , +0x04000400 , +0x11000001 , +0x00007014 , +0x00010001 , +0x11000001 , +0x00007300 , +0x00100010 , +0x11000001 , +0x00007004 , +0x00400040 , +0x11000001 , +0x00007008 , +0x02800200 ,0x69040000 ,0x61020001 ,0x00000000 ,@@ -40,9 +64,9 @@ static const u32 gen8_null_state_batch[] = {0xfffff001 ,0x00001001 ,0x78230000 , -0x000006e0 , +0x00000720 ,0x78210000 , -0x00000700 , +0x00000740 ,0x78300000 ,0x08010040 , 0x78330000,@@ -52,9 +76,9 @@ static const u32 gen8_null_state_batch[] = {0x78320000 ,0x08000000 ,0x78240000 , -0x00000641 , +0x00000681 ,0x780e0000 , -0x00000601 , +0x00000641 ,0x780d0000 ,0x00000000 , 0x78180000,@@ -199,9 +223,9 @@ static const u32 gen8_null_state_batch[] = {0x00000000 ,0x00000000 ,0x782a0000 , -0x00000480 , +0x000004c0 ,0x782f0000 , -0x00000540 , +0x00000580 ,0x78140000 ,0x00000800 , 0x78170009,@@ -216,7 +240,7 @@ static const u32 gen8_null_state_batch[] = {0x00000000 ,0x00000000 ,0x7820000a , -0x00000580 , +0x000005c0 ,0x00000000 ,0x08080000 , 0x00000000,@@ -232,7 +256,7 @@ static const u32 gen8_null_state_batch[] = {0x784f0000 ,0x80000100 ,0x780f0000 , -0x00000740 , +0x00000780 ,0x78050006 ,0x00000000 , 0x00000000,@@ -260,7 +284,7 @@ static const u32 gen8_null_state_batch[] = {0x00000000 ,0x78080003 ,0x00006000 , -0x000005e0 ,/* reloc */ +0x00000620 ,/* reloc */ 0x00000000 ,0x00000000 , 0x78090005,@@ -289,16 +313,8 @@ static const u32 gen8_null_state_batch[] = {0x00000000 ,0x00000000 ,0x00000000 , -0x00000000 , -0x00000000 , -0x00000000 , -0x00000000 , -0x00000000 , -0x00000000 , -0x00000000 , -0x00000000 , -0x000004c0 ,/* state start */ -0x00000500 , +0x00000500 ,/* state start */ +0x00000540 ,0x00000000 ,0x00000000 , 0x00000000, --2.0.4
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx