PCIe, AER: Misc cleanup
Subsystems (4)
cover PCIe, AER: Misc cleanup
No response since last commit so spread it to a bigger range.
This patch series is for AER related cleanup & update based on PCIe SPEC r3.0.
PATCH RESEND 1/5 RAS, trace: Update error definition format
Previous format definition uses MACRO BIT(...), which is not very maintainable as Bjorn mentioned before:
"I'd like to see all those "BIT(...)" things changed to use the #defines that already exist in include/uapi/linux/pci_regs.h, e.g., PCI_ERR_COR_RCVR. That way grep will find these uses, which will make maintenance easier."
Now here it is.
--- include/ras/ras_event.h | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-)
include/ras/ras_event.h +17 -16
@@ -8,6 +8,7 @@#include <linux/tracepoint.h> #include <linux/edac.h> #include <linux/ktime.h> +#include <linux/pci.h> #include <linux/aer.h> #include <linux/cper.h>
@@ -174,24 +175,24 @@ TRACE_EVENT(mc_event,*/ #define aer_correctable_errors \ - {BIT(0), "Receiver Error"}, \ - {BIT(6), "Bad TLP"}, \ - {BIT(7), "Bad DLLP"}, \ - {BIT(8), "RELAY_NUM Rollover"}, \ - {BIT(12), "Replay Timer Timeout"}, \ - {BIT(13), "Advisory Non-Fatal"} + {PCI_ERR_COR_RCVR, "Receiver Error"}, \ + {PCI_ERR_COR_BAD_TLP, "Bad TLP"}, \ + {PCI_ERR_COR_BAD_DLLP, "Bad DLLP"}, \ + {PCI_ERR_COR_REP_ROLL, "RELAY_NUM Rollover"}, \ + {PCI_ERR_COR_REP_TIMER, "Replay Timer Timeout"},\ + {PCI_ERR_COR_ADV_NFAT, "Advisory Non-Fatal"}#define aer_uncorrectable_errors \ - {BIT(4), "Data Link Protocol"}, \ - {BIT(12), "Poisoned TLP"}, \ - {BIT(13), "Flow Control Protocol"}, \ - {BIT(14), "Completion Timeout"}, \ - {BIT(15), "Completer Abort"}, \ - {BIT(16), "Unexpected Completion"}, \ - {BIT(17), "Receiver Overflow"}, \ - {BIT(18), "Malformed TLP"}, \ - {BIT(19), "ECRC"}, \ - {BIT(20), "Unsupported Request"} + {PCI_ERR_UNC_DLP, "Data Link Protocol"}, \ + {PCI_ERR_UNC_POISON_TLP,"Poisoned TLP"}, \ + {PCI_ERR_UNC_FCP, "Flow Control Protocol"}, \ + {PCI_ERR_UNC_COMP_TIME, "Completion Timeout"}, \ + {PCI_ERR_UNC_COMP_ABORT,"Completer Abort"}, \ + {PCI_ERR_UNC_UNX_COMP, "Unexpected Completion"}, \ + {PCI_ERR_UNC_RX_OVER, "Receiver Overflow"}, \ + {PCI_ERR_UNC_MALF_TLP, "Malformed TLP"}, \ + {PCI_ERR_UNC_ECRC, "ECRC"}, \ + {PCI_ERR_UNC_UNSUP, "Unsupported Request"} TRACE_EVENT(aer_event, TP_PROTO(const char *dev_name,
Signature · 1 line
2.0.0.rc2
PATCH RESEND 2/5 PCIe, AER: Replenish missed AER status bits for AER driver
In reply to Chen, GongSince commit 6c2b374d is commited, the capability of PCI-e AER has changed a lot. This patch adds all missed CE/UC error bits existed in PCI-e SPEC r3.0. Meanwhile, adjust the code format to make it simpler to read/maintain.
--- drivers/pci/pcie/aer/aerdrv_errprint.c | 60 ++++++++++++++-------------------- 1 file changed, 25 insertions(+), 35 deletions(-)
drivers/pci/pcie/aer/aerdrv_errprint.c +25 -35
@@ -75,44 +75,34 @@ static const char *aer_error_layer[] = { };static const char *aer_correctable_error_string[] = { -"Receiver Error" ,/* Bit Position 0 */ -NULL , -NULL , -NULL , -NULL , -NULL , -"Bad TLP" ,/* Bit Position 6 */ -"Bad DLLP" ,/* Bit Position 7 */ -"RELAY_NUM Rollover" ,/* Bit Position 8 */ -NULL , -NULL , -NULL , -"Replay Timer Timeout" ,/* Bit Position 12 */ -"Advisory Non-Fatal" ,/* Bit Position 13 */ + [0 ] ="Receiver Error" , + [6 ] ="Bad TLP" , + [7 ] ="Bad DLLP" , + [8 ] ="RELAY_NUM Rollover" , + [12 ] ="Replay Timer Timeout" , + [13 ] ="Advisory Non-Fatal Error" , + [14 ] ="Corrected Internal Error" , + [15 ] ="Header Log Overflow" , };static const char *aer_uncorrectable_error_string[] = { -NULL , -NULL , -NULL , -NULL , -"Data Link Protocol" ,/* Bit Position 4 */ -NULL , -NULL , -NULL , -NULL , -NULL , -NULL , -NULL , -"Poisoned TLP" ,/* Bit Position 12 */ -"Flow Control Protocol" ,/* Bit Position 13 */ -"Completion Timeout" ,/* Bit Position 14 */ -"Completer Abort" ,/* Bit Position 15 */ -"Unexpected Completion" ,/* Bit Position 16 */ -"Receiver Overflow" ,/* Bit Position 17 */ -"Malformed TLP" ,/* Bit Position 18 */ -"ECRC" ,/* Bit Position 19 */ -"Unsupported Request" ,/* Bit Position 20 */ + [0 ] ="Undefined" , + [4 ] ="Data Link Protocol Error" , + [5 ] ="Surprise Down Error" , + [12 ] ="Poisoned TLP" , + [13 ] ="Flow Control Protocol Error" , + [14 ] ="Completion Timeout" , + [15 ] ="Completer Abort" , + [16 ] ="Unexpected Completion" , + [17 ] ="Receiver Overflow" , + [18 ] ="Malformed TLP" , + [19 ] ="ECRC Error" , + [20 ] ="Unsupported Request Error" , + [21 ] ="ACS Violation" , + [22 ] ="Uncorrectable Internal Error" , + [23 ] ="MC Blocked TLP" , + [24 ] ="AtomicOp Egress Blocked" , + [25 ] ="TLP Prefix Blocked Error" , };static const char *aer_agent_string[] = {
Signature · 1 line
2.0.0.rc2
Bjorn Helgaas
maintainerRe: [RESEND 2/5] PCIe, AER: Replenish missed AER status bits for AER driver
Quoted 30 lines · Gong
Since commit
6c2b374dis commited, the capability of PCI-e AER has changed a lot. This patch adds all missed CE/UC error bits existed in PCI-e SPEC r3.0. Meanwhile, adjust the code format to make it simpler to read/maintain.Signed-off-by Chen, Gong <[email protected]>--- drivers/pci/pcie/aer/aerdrv_errprint.c | 60 ++++++++++++++-------------------- 1 file changed, 25 insertions(+), 35 deletions(-)drivers/pci/pcie/aer/aerdrv_errprint.c +0
-12@@ -75,44 +75,34 @@ static const char *aer_error_layer[] = { };static const char *aer_correctable_error_string[] = { -"Receiver Error" ,/* Bit Position 0 */ -NULL , -NULL , -NULL , -NULL , -NULL , -"Bad TLP" ,/* Bit Position 6 */ -"Bad DLLP" ,/* Bit Position 7 */ -"RELAY_NUM Rollover" ,/* Bit Position 8 */ -NULL , -NULL , -NULL ,
drivers/pci/pcie/aer/aerdrv_errprint.c static const char *aer_error_layer[] = { · line 85
Quoted 10 lines
drivers/pci/pcie/aer/aerdrv_errprint.c +8
-2-"Replay Timer Timeout" ,/* Bit Position 12 */ - "Advisory Non-Fatal", /* Bit Position 13 */ + [0] = "Receiver Error", + [6] = "Bad TLP", + [7] = "Bad DLLP", + [8] = "RELAY_NUM Rollover", + [12] = "Replay Timer Timeout", + [13] = "Advisory Non-Fatal Error", + [14] = "Corrected Internal Error", + [15] = "Header Log Overflow",
You replaced bare numbers with the existing #defines in the previous patch (thank you), but now we're adding them here. I'm pretty sure you can use the #defines here, e.g.,
[PCI_ERR_COR_RCVR] = "Receiver Error",
In fact, it would be really nice if you could figure out a way to have only one set of these strings. Right now, we have the set in include/ras/ras_event.h, and then another set here in aerdrv_errprint.c, and they contain exactly the same information.
Bjorn
Quoted 47 lines
drivers/pci/pcie/aer/aerdrv_errprint.c +17
-21};static const char *aer_uncorrectable_error_string[] = { -NULL , -NULL , -NULL , -NULL , -"Data Link Protocol" ,/* Bit Position 4 */ -NULL , -NULL , -NULL , -NULL , -NULL , -NULL , -NULL , -"Poisoned TLP" ,/* Bit Position 12 */ -"Flow Control Protocol" ,/* Bit Position 13 */ -"Completion Timeout" ,/* Bit Position 14 */ -"Completer Abort" ,/* Bit Position 15 */ -"Unexpected Completion" ,/* Bit Position 16 */ -"Receiver Overflow" ,/* Bit Position 17 */ -"Malformed TLP" ,/* Bit Position 18 */ -"ECRC" ,/* Bit Position 19 */ -"Unsupported Request" ,/* Bit Position 20 */ + [0 ] ="Undefined" , + [4 ] ="Data Link Protocol Error" , + [5 ] ="Surprise Down Error" , + [12 ] ="Poisoned TLP" , + [13 ] ="Flow Control Protocol Error" , + [14 ] ="Completion Timeout" , + [15 ] ="Completer Abort" , + [16 ] ="Unexpected Completion" , + [17 ] ="Receiver Overflow" , + [18 ] ="Malformed TLP" , + [19 ] ="ECRC Error" , + [20 ] ="Unsupported Request Error" , + [21 ] ="ACS Violation" , + [22 ] ="Uncorrectable Internal Error" , + [23 ] ="MC Blocked TLP" , + [24 ] ="AtomicOp Egress Blocked" , + [25 ] ="TLP Prefix Blocked Error" , };static const char *aer_agent_string[] = {Signature · 1 line
2.0.0.rc2
Re: [RESEND 2/5] PCIe, AER: Replenish missed AER status bits for AER driver
Quoted 55 lines · Bjorn Helgaas
Date: Fri, 5 Sep 2014 17:15:43 -0600
From: Bjorn Helgaas <[email protected]>
To: "Chen, Gong" <[email protected]>
Cc: [email protected], [email protected], [email protected],
[email protected], [email protected]
Subject: Re: [RESEND 2/5] PCIe, AER: Replenish missed AER status bits for
AER driver
User-Agent: Mutt/1.5.21 (2010-09-15)Quoted 30 lines · Gong
Since commit
6c2b374dis commited, the capability of PCI-e AER has changed a lot. This patch adds all missed CE/UC error bits existed in PCI-e SPEC r3.0. Meanwhile, adjust the code format to make it simpler to read/maintain.Signed-off-by Chen, Gong <[email protected]>--- drivers/pci/pcie/aer/aerdrv_errprint.c | 60 ++++++++++++++-------------------- 1 file changed, 25 insertions(+), 35 deletions(-)drivers/pci/pcie/aer/aerdrv_errprint.c +0
-12@@ -75,44 +75,34 @@ static const char *aer_error_layer[] = { };static const char *aer_correctable_error_string[] = { -"Receiver Error" ,/* Bit Position 0 */ -NULL , -NULL , -NULL , -NULL , -NULL , -"Bad TLP" ,/* Bit Position 6 */ -"Bad DLLP" ,/* Bit Position 7 */ -"RELAY_NUM Rollover" ,/* Bit Position 8 */ -NULL , -NULL , -NULL ,drivers/pci/pcie/aer/aerdrv_errprint.c static const char *aer_error_layer[] = { · line 85
Quoted 10 lines
drivers/pci/pcie/aer/aerdrv_errprint.c +8
-2-"Replay Timer Timeout" ,/* Bit Position 12 */ - "Advisory Non-Fatal", /* Bit Position 13 */ + [0] = "Receiver Error", + [6] = "Bad TLP", + [7] = "Bad DLLP", + [8] = "RELAY_NUM Rollover", + [12] = "Replay Timer Timeout", + [13] = "Advisory Non-Fatal Error", + [14] = "Corrected Internal Error", + [15] = "Header Log Overflow",You replaced bare numbers with the existing #defines in the previous patch (thank you), but now we're adding them here. I'm pretty sure you can use the #defines here, e.g.,
Quoted 1 line
[
PCI_ERR_COR_RCVR] = "Receiver Error",
Considering PCI_ERR_COR_* stuff are not BIT offset, I need a conversion like [ilog2(PCI_ERR_COR_RCVR)] = "xxx". But in ras_event.h I need the same conversion like aer_correctable_error_string[ilog2(PCI_ERR_COR_RCVR)]. It looks like a little bit clumsy and suboptimal. I can add extra BIT definition in include/uapi/linux/pci_regs.h like below:
#define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */
+#define PCI_ERR_COR_RCVR_BIT ilog2(PCI_ERR_COR_RCVR)
or more direct way:
#define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */
+#define PCI_ERR_COR_RCVR_BIT 0
I can't find better method by now.
Quoted 3 lines
In fact, it would be really nice if you could figure out a way to have only one set of these strings. Right now, we have the set in
As above implied, I can export aer_correctable_error_string etc.
Bjorn Helgaas
maintainerRe: [RESEND 2/5] PCIe, AER: Replenish missed AER status bits for AER driver
In reply to Chen, Gong[+cc Heather]
Quoted 30 lines · Gong
Since commit
6c2b374dis commited, the capability of PCI-e AER has changed a lot. This patch adds all missed CE/UC error bits existed in PCI-e SPEC r3.0. Meanwhile, adjust the code format to make it simpler to read/maintain.Signed-off-by Chen, Gong <[email protected]>--- drivers/pci/pcie/aer/aerdrv_errprint.c | 60 ++++++++++++++-------------------- 1 file changed, 25 insertions(+), 35 deletions(-)drivers/pci/pcie/aer/aerdrv_errprint.c +0
-12@@ -75,44 +75,34 @@ static const char *aer_error_layer[] = { };static const char *aer_correctable_error_string[] = { -"Receiver Error" ,/* Bit Position 0 */ -NULL , -NULL , -NULL , -NULL , -NULL , -"Bad TLP" ,/* Bit Position 6 */ -"Bad DLLP" ,/* Bit Position 7 */ -"RELAY_NUM Rollover" ,/* Bit Position 8 */ -NULL , -NULL , -NULL ,
drivers/pci/pcie/aer/aerdrv_errprint.c static const char *aer_error_layer[] = { · line 85
Quoted 10 lines
drivers/pci/pcie/aer/aerdrv_errprint.c +8
-2-"Replay Timer Timeout" ,/* Bit Position 12 */ - "Advisory Non-Fatal", /* Bit Position 13 */ + [0] = "Receiver Error", + [6] = "Bad TLP", + [7] = "Bad DLLP", + [8] = "RELAY_NUM Rollover", + [12] = "Replay Timer Timeout", + [13] = "Advisory Non-Fatal Error", + [14] = "Corrected Internal Error", + [15] = "Header Log Overflow",
This patch does two things at once: (1) adds new error strings and (2) converts to the designated initializer style. The first is useful but I don't think the second really helps anything.
We still have to manually match up the array index, e.g., "14", with the #define, PCI_ERR_COR_INTERNAL, and then count bits to make sure it matches the constant 0x00004000.
I'm still holding out for a change that solves that problem. I would also like to avoid duplicating all the strings between include/ras/ras_event.h and drivers/pci/pcie/aer/aerdrv_errprint.c.
In the meantime, I applied the patch below, which does just (1).
Bjorn
commit d179111767aa2a1d594023ce65abf9c81bfbb0cf
Author: Chen, Gong <[email protected]> Date: Thu Sep 25 09:36:43 2014 -0600
PCI/AER: Add additional PCIe AER error strings
Add strings for all AER error bits defined in PCIe r3.0.
drivers/pci/pcie/aer/aerdrv_errprint.c +9 -2
@@ -89,15 +89,17 @@ static const char *aer_correctable_error_string[] = {NULL ,"Replay Timer Timeout" ,/* Bit Position 12 */ "Advisory Non-Fatal" ,/* Bit Position 13 */ +"Corrected Internal Error" ,/* Bit Position 14 */ + "Header Log Overflow", /* Bit Position 15 */ };static const char *aer_uncorrectable_error_string[] = { -NULL , +"Undefined" ,/* Bit Position 0 */ NULL ,NULL ,NULL ,"Data Link Protocol" ,/* Bit Position 4 */ -NULL , +"Surprise Down Error" ,/* Bit Position 5 */ NULL ,NULL , NULL,
@@ -113,6 +115,11 @@ static const char *aer_uncorrectable_error_string[] = {"Malformed TLP" ,/* Bit Position 18 */ "ECRC" ,/* Bit Position 19 */ "Unsupported Request" ,/* Bit Position 20 */ +"ACS Violation" ,/* Bit Position 21 */ +"Uncorrectable Internal Error" ,/* Bit Position 22 */ +"MC Blocked TLP" ,/* Bit Position 23 */ +"AtomicOp Egress Blocked" ,/* Bit Position 24 */ + "TLP Prefix Blocked Error", /* Bit Position 25 */ }; static const char *aer_agent_string[] = {
PATCH RESEND 3/5 PCIe, trace: Replenish missed AER status bits for PCIE trace I/F
In reply to Chen, GongThis patch adds all missed AER error bits(CE & UC) existed in PCI-e SPEC r3.0 for trace interface.
--- include/ras/ras_event.h | 35 ++++++++++++++++++++++------------- 1 file changed, 22 insertions(+), 13 deletions(-)
include/ras/ras_event.h +22 -13
@@ -174,25 +174,34 @@ TRACE_EVENT(mc_event,* u8 severity - error severity 0:NONFATAL 1:FATAL 2:CORRECTED */ -#define aer_correctable_errors \ - {PCI_ERR_COR_RCVR, "Receiver Error"}, \ - {PCI_ERR_COR_BAD_TLP, "Bad TLP"}, \ - {PCI_ERR_COR_BAD_DLLP, "Bad DLLP"}, \ - {PCI_ERR_COR_REP_ROLL, "RELAY_NUM Rollover"}, \ - {PCI_ERR_COR_REP_TIMER, "Replay Timer Timeout"},\ - {PCI_ERR_COR_ADV_NFAT, "Advisory Non-Fatal"} - -#define aer_uncorrectable_errors \ - {PCI_ERR_UNC_DLP, "Data Link Protocol"}, \ +#define aer_correctable_errors \ + {PCI_ERR_COR_RCVR, "Receiver Error"}, \ + {PCI_ERR_COR_BAD_TLP, "Bad TLP"}, \ + {PCI_ERR_COR_BAD_DLLP, "Bad DLLP"}, \ + {PCI_ERR_COR_REP_ROLL, "RELAY_NUM Rollover"}, \ + {PCI_ERR_COR_REP_TIMER, "Replay Timer Timeout"}, \ + {PCI_ERR_COR_ADV_NFAT, "Advisory Non-Fatal Error"}, \ + {PCI_ERR_COR_INTERNAL, "Corrected Internal Error"}, \ + {PCI_ERR_COR_LOG_OVER, "Header Log Overflow"} + +#define aer_uncorrectable_errors \ + {PCI_ERR_UNC_TRAIN, "Undefined"}, \ + {PCI_ERR_UNC_DLP, "Data Link Protocol Error"}, \ + {PCI_ERR_UNC_SURPDN, "Surprise Down Error"}, \ {PCI_ERR_UNC_POISON_TLP,"Poisoned TLP"}, \ - {PCI_ERR_UNC_FCP, "Flow Control Protocol"}, \ + {PCI_ERR_UNC_FCP, "Flow Control Protocol Error"}, \ {PCI_ERR_UNC_COMP_TIME, "Completion Timeout"}, \ {PCI_ERR_UNC_COMP_ABORT,"Completer Abort"}, \ {PCI_ERR_UNC_UNX_COMP, "Unexpected Completion"}, \ {PCI_ERR_UNC_RX_OVER, "Receiver Overflow"}, \ {PCI_ERR_UNC_MALF_TLP, "Malformed TLP"}, \ - {PCI_ERR_UNC_ECRC, "ECRC"}, \ - {PCI_ERR_UNC_UNSUP, "Unsupported Request"} + {PCI_ERR_UNC_ECRC, "ECRC Error"}, \ + {PCI_ERR_UNC_UNSUP, "Unsupported Request Error"}, \ + {PCI_ERR_UNC_ACSV, "ACS Violation"}, \ + {PCI_ERR_UNC_INTN, "Uncorrectable Internal Error"},\ + {PCI_ERR_UNC_MCBTLP, "MC Blocked TLP"}, \ + {PCI_ERR_UNC_ATOMEG, "AtomicOp Egress Blocked"}, \ + {PCI_ERR_UNC_TLPPRE, "TLP Prefix Blocked Error"} TRACE_EVENT(aer_event, TP_PROTO(const char *dev_name,
Signature · 1 line
2.0.0.rc2
PATCH RESEND 4/5 PCIe, AER: Make AER UC status naming clearer
In reply to Chen, GongIn PCI-e SPEC r3.0, BIT 0 of Uncorrectable Error Status Register has been redefined for a different purpose.
BIT 0:
Undefined – The value read from this bit is undefined. In
previous versions of this specification, this bit was used to mask a Link Training Error. System software must ignore the value read from this bit. System software must only write a value of 1b to this bit.
Update related MACRO definition to reflect this change.
--- drivers/vfio/pci/vfio_pci_config.c | 2 +- include/ras/ras_event.h | 2 +- include/uapi/linux/pci_regs.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
drivers/vfio/pci/vfio_pci_config.c +1 -1
@@ -727,7 +727,7 @@ static int __init init_pci_ext_cap_err_perm(struct perm_bits *perm)p_setd (perm,0 ,ALL_VIRT ,NO_WRITE );/* Writable bits mask */ - mask =PCI_ERR_UNC_TRAIN |/* Training */ + mask =PCI_ERR_UNC_UND |/* Undefined */ PCI_ERR_UNC_DLP |/* Data Link Protocol */ PCI_ERR_UNC_SURPDN |/* Surprise Down */ PCI_ERR_UNC_POISON_TLP | /* Poisoned TLP */
include/ras/ras_event.h +1 -1
@@ -185,7 +185,7 @@ TRACE_EVENT(mc_event, {PCI_ERR_COR_LOG_OVER, "Header Log Overflow"}#define aer_uncorrectable_errors \ - {PCI_ERR_UNC_TRAIN, "Undefined"}, \ + {PCI_ERR_UNC_UND, "Undefined"}, \ {PCI_ERR_UNC_DLP, "Data Link Protocol Error"}, \ {PCI_ERR_UNC_SURPDN, "Surprise Down Error"}, \ {PCI_ERR_UNC_POISON_TLP,"Poisoned TLP"}, \
include/uapi/linux/pci_regs.h +1 -1
@@ -630,7 +630,7 @@/* Advanced Error Reporting */ #define PCI_ERR_UNCOR_STATUS 4/* Uncorrectable Error Status */ -#define PCI_ERR_UNC_TRAIN 0x00000001/* Training */ +#define PCI_ERR_UNC_UND 0x00000001/* Undefined */ #define PCI_ERR_UNC_DLP 0x00000010/* Data Link Protocol */ #define PCI_ERR_UNC_SURPDN 0x00000020/* Surprise Down */ #define PCI_ERR_UNC_POISON_TLP 0x00001000/* Poisoned TLP */
Signature · 1 line
2.0.0.rc2
RFC 5/5 PCIe, AER: Update initial value of UC error mask
In reply to Chen, GongIn PCI-e SPEC r3.0, BIT 0 of Uncorrectable Error Status Register is redefined and it has an explicit requirement that when writing this field, a value of 1b is the only choice. So change previous initial maks from 0 to 1.
---
NOTE: After scratching all use cases, this is the most obvious use case to violate the SPEC. Most of use cases just read first and then overwrite for clear purpose. Even so, such fix is obvious to not compatiable with previous SPEC definition. Do we need a dirty hack?
arch/mips/pci/pci-octeon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/mips/pci/pci-octeon.c +1 -1
@@ -134,7 +134,7 @@ int pcibios_plat_dev_init(struct pci_dev *dev) dconfig);/* Enable reporting of all uncorrectable errors */ /* Uncorrectable Error Mask - turned on bits disable errors */ -pci_write_config_dword (dev, pos +PCI_ERR_UNCOR_MASK ,0 ); +pci_write_config_dword (dev, pos +PCI_ERR_UNCOR_MASK ,1 );/* * Leave severity at HW default. This only controls if * errors are reported as uncorrectable or
Signature · 1 line
2.0.0.rc2
Bjorn Helgaas
maintainerRe: [RESEND RFC 5/5] PCIe, AER: Update initial value of UC error mask
Quoted 21 lines · Gong
In PCI-e SPEC r3.0, BIT 0 of Uncorrectable Error Status Register is redefined and it has an explicit requirement that when writing this field, a value of 1b is the only choice. So change previous initial maks from 0 to 1.
Signed-off-by Chen, Gong <[email protected]>---
NOTE: After scratching all use cases, this is the most obvious use case to violate the SPEC. Most of use cases just read first and then overwrite for clear purpose. Even so, such fix is obvious to not compatiable with previous SPEC definition. Do we need a dirty hack?arch/mips/pci/pci-octeon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/mips/pci/pci-octeon.c +0
-0
arch/mips/pci/pci-octeon.c int pcibios_plat_dev_init(struct pci_dev *dev) · line 137
Quoted 5 lines
arch/mips/pci/pci-octeon.c +1
-1@@ -134,7 +134,7 @@ int pcibios_plat_dev_init(struct pci_dev *dev) dconfig);/* Enable reporting of all uncorrectable errors */ /* Uncorrectable Error Mask - turned on bits disable errors */ -pci_write_config_dword (dev, pos +PCI_ERR_UNCOR_MASK ,0 ); +pci_write_config_dword (dev, pos +PCI_ERR_UNCOR_MASK ,1 );
I see the text in the spec that says we should only write 1 to bit 0 (sec 7.10.3, for anybody following along). It looks like that change was made between PCIe r1.0 and r1.1. It would really be nice to have more context about why the change was made, because if there's hardware in the field that implements r1.0 behavior, this patch will change the way it works, and I don't know how to verify that is safe.
Does this actually change fix a problem? If it fixes a problem that happens on real hardware, that's a much better reason to make a change than just to comply with the spec.
Sec 7.10.2 also says we should ignore the value of bit 0 in the Uncorrectable Error Status register, and I don't see any place where we follow that advice.
Bjorn
Quoted 5 lines
arch/mips/pci/pci-octeon.c +0
-0* Leave severity at HW default. This only controls if * errors are reported as uncorrectable or Signature · 1 line
2.0.0.rc2
Re: [RESEND RFC 5/5] PCIe, AER: Update initial value of UC error mask
Quoted 44 lines · Bjorn Helgaas
Date: Fri, 5 Sep 2014 17:34:21 -0600
From: Bjorn Helgaas <[email protected]>
To: "Chen, Gong" <[email protected]>
Cc: [email protected], [email protected], [email protected],
[email protected], [email protected]
Subject: Re: [RESEND RFC 5/5] PCIe, AER: Update initial value of UC error
mask
User-Agent: Mutt/1.5.21 (2010-09-15)Quoted 21 lines · Gong
In PCI-e SPEC r3.0, BIT 0 of Uncorrectable Error Status Register is redefined and it has an explicit requirement that when writing this field, a value of 1b is the only choice. So change previous initial maks from 0 to 1.
Signed-off-by Chen, Gong <[email protected]>---
NOTE: After scratching all use cases, this is the most obvious use case to violate the SPEC. Most of use cases just read first and then overwrite for clear purpose. Even so, such fix is obvious to not compatiable with previous SPEC definition. Do we need a dirty hack?arch/mips/pci/pci-octeon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/mips/pci/pci-octeon.c +0
-0arch/mips/pci/pci-octeon.c int pcibios_plat_dev_init(struct pci_dev *dev) · line 137
Quoted 5 lines
arch/mips/pci/pci-octeon.c +1
-1@@ -134,7 +134,7 @@ int pcibios_plat_dev_init(struct pci_dev *dev) dconfig);/* Enable reporting of all uncorrectable errors */ /* Uncorrectable Error Mask - turned on bits disable errors */ -pci_write_config_dword (dev, pos +PCI_ERR_UNCOR_MASK ,0 ); +pci_write_config_dword (dev, pos +PCI_ERR_UNCOR_MASK ,1 );I see the text in the spec that says we should only write 1 to bit 0 (sec 7.10.3, for anybody following along). It looks like that change was made between PCIe r1.0 and r1.1. It would really be nice to have more context about why the change was made, because if there's hardware in the field that implements r1.0 behavior, this patch will change the way it works, and I don't know how to verify that is safe.
Quoted 8 lines
Does this actually change fix a problem? If it fixes a problem that happens on real hardware, that's a much better reason to make a change than just to comply with the spec.
Sec 7.10.2 also says we should ignore the value of bit 0 in the Uncorrectable Error Status register, and I don't see any place where we follow that advice.
That's why I mark this patch as RFC. As you mentioned above, these are my concerns, too. I submit such a patch not for merging but throwing a potential issue. As I noted above, I don't know if it is deserved to fix all affected placed to comply with spec change. After all, no one reports such an issue (or maybe have happened :-))
Bjorn Helgaas
maintainerQuoted 5 lines · Gong
No response since last commit so spread it to a bigger range.
This patch series is for AER related cleanup & update based on PCIe SPEC r3.0.
I haven't responded because I've been on vacation for the past three weeks. If there's no change in the patches themselves, and if they are still in http://patchwork.ozlabs.org/project/linux-pci/list, the only thing reposting them does is make more work for me.
Bjorn
Quoted 5 lines · Bjorn Helgaas
I haven't responded because I've been on vacation for the past three weeks. If there's no change in the patches themselves, and if they are still in http://patchwork.ozlabs.org/project/linux-pci/list, the only thing reposting them does is make more work for me.
There is one difference existed in Patch 1. I add more explanation in the comments as Boris suggested.
Quoted 10 lines · Gong
Date: Wed, 13 Aug 2014 21:52:36 -0400
From: "Chen, Gong" <[email protected]>
To: Bjorn Helgaas <[email protected]>
Cc: Randy Dunlap <[email protected]>, Borislav Petkov <[email protected]>,
Tony Luck <[email protected]>, "[email protected]" <[email protected]>, "[email protected]" <[email protected]>
Subject: Re: [RESEND 0/5] PCIe, AER: Misc cleanup
User-Agent: Mutt/1.5.23 (2014-03-12)
Quoted 8 lines
Quoted 5 lines · Bjorn Helgaas
I haven't responded because I've been on vacation for the past three weeks. If there's no change in the patches themselves, and if they are still in http://patchwork.ozlabs.org/project/linux-pci/list, the only thing reposting them does is make more work for me.
There is one difference existed in Patch 1. I add more explanation in the comments as Boris suggested.
Hi, Bjorn
Any comments?
[+cc Heather]
Quoted 5 lines · Gong
No response since last commit so spread it to a bigger range.
This patch series is for AER related cleanup & update based on PCIe SPEC r3.0.
I applied patches 1, 2 (modified as described in my response to it), 3, and 4 to pci/aer for v3.19, thanks!
I didn't apply patch 5 because it apparently doesn't fix a reported bug, and it has the potential to break hardware that used the PCIe r1.0 definition of the "Training Error" bit.
Bjorn