Skip to contentSkip to conversation

mfd: wm5102: Mark register write sequencer control 3 readable

PATCH RESEND Superseded Charles Keepax 2 participants 3 messages Aug 13, 2014

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH RESEND 1/2 mfd: wm5102: Mark register write sequencer control 3 readable

From: Mark Brown <[email protected]>

During init the core checks if the wm5102 has finished starting by reading register 0x19 and looking at the value. This read always fails since this is not a readable register, mark it as being one. While we're at it provide a constant for the register name (as supplied by Charles Keepax).

---
 drivers/mfd/arizona-core.c            |    3 ++-
 drivers/mfd/wm5102-tables.c           |    1 +
 include/linux/mfd/arizona/registers.h |    1 +
 3 files changed, 4 insertions(+), 1 deletions(-)
drivers/mfd/arizona-core.c +2 -1
index 10a0cb9..7eabc36 100644
@@ -784,7 +784,8 @@ int arizona_dev_init(struct arizona *arizona)
 	/* Ensure device startup is complete */
 	switch (arizona->type) {
 	case WM5102:
-		ret = regmap_read(arizona->regmap, 0x19, &val);
+		ret = regmap_read(arizona->regmap,
+				  ARIZONA_WRITE_SEQUENCER_CTRL_3, &val);
 		if (ret != 0)
 			dev_err(dev,
 				"Failed to check write sequencer state: %d\n",
drivers/mfd/wm5102-tables.c +1 -0
index fb4d4bb..c18d527 100644
@@ -1016,6 +1016,7 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_WRITE_SEQUENCER_CTRL_0:
 	case ARIZONA_WRITE_SEQUENCER_CTRL_1:
 	case ARIZONA_WRITE_SEQUENCER_CTRL_2:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_3:
 	case ARIZONA_WRITE_SEQUENCER_PROM:
 	case ARIZONA_TONE_GENERATOR_1:
 	case ARIZONA_TONE_GENERATOR_2:
include/linux/mfd/arizona/registers.h +1 -0
index dbd23c3..68913ec 100644
@@ -27,6 +27,7 @@
 #define ARIZONA_WRITE_SEQUENCER_CTRL_0           0x16
 #define ARIZONA_WRITE_SEQUENCER_CTRL_1           0x17
 #define ARIZONA_WRITE_SEQUENCER_CTRL_2           0x18
+#define ARIZONA_WRITE_SEQUENCER_CTRL_3           0x19
 #define ARIZONA_WRITE_SEQUENCER_PROM             0x1A
 #define ARIZONA_TONE_GENERATOR_1                 0x20
 #define ARIZONA_TONE_GENERATOR_2                 0x21
Signature · 1 line
1.7.2.5
#1 lore raw

PATCH 2/2 mfd: arizona: Mark additional registers as volatile

Mark some additional registers as volatile. The write sequencer control registers should not be cached, as we don't ever want their value synchronised as this might cause a write sequence to be accidentally initiated.

Additionally, the DAC_COMP registers require special preconditions to write so there values wouldn't be updated accurately during a register sync.

---
 drivers/mfd/wm5102-tables.c |   11 ++++++++---
 drivers/mfd/wm5110-tables.c |    6 +++---
 2 files changed, 11 insertions(+), 6 deletions(-)
drivers/mfd/wm5102-tables.c +8 -3
index c18d527..191f224 100644
@@ -245,9 +245,6 @@ const struct regmap_irq_chip wm5102_irq = {
 static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000008, 0x0019 },   /* R8     - Ctrl IF SPI CFG 1 */ 
 	{ 0x00000009, 0x0001 },   /* R9     - Ctrl IF I2C1 CFG 1 */ 
-	{ 0x00000016, 0x0000 },   /* R22    - Write Sequencer Ctrl 0 */ 
-	{ 0x00000017, 0x0000 },   /* R23    - Write Sequencer Ctrl 1 */ 
-	{ 0x00000018, 0x0000 },   /* R24    - Write Sequencer Ctrl 2 */ 
 	{ 0x00000020, 0x0000 },   /* R32    - Tone Generator 1 */ 
 	{ 0x00000021, 0x1000 },   /* R33    - Tone Generator 2 */ 
 	{ 0x00000022, 0x0000 },   /* R34    - Tone Generator 3 */ 
@@ -1881,6 +1878,10 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg)
 	switch (reg) {
 	case ARIZONA_SOFTWARE_RESET:
 	case ARIZONA_DEVICE_REVISION:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_0:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_1:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_2:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_3:
 	case ARIZONA_OUTPUT_STATUS_1:
 	case ARIZONA_RAW_OUTPUT_STATUS_1:
 	case ARIZONA_SLIMBUS_RX_PORT_STATUS:
@@ -1892,6 +1893,10 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg)
 	case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS:
 	case ARIZONA_FLL1_NCO_TEST_0:
 	case ARIZONA_FLL2_NCO_TEST_0:
+	case ARIZONA_DAC_COMP_1:
+	case ARIZONA_DAC_COMP_2:
+	case ARIZONA_DAC_COMP_3:
+	case ARIZONA_DAC_COMP_4:
 	case ARIZONA_FX_CTRL2:
 	case ARIZONA_INTERRUPT_STATUS_1:
 	case ARIZONA_INTERRUPT_STATUS_2:
drivers/mfd/wm5110-tables.c +3 -3
index 9b98ee5..beae0a3 100644
@@ -666,9 +666,6 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x0000000A, 0x0001 },    /* R10    - Ctrl IF I2C2 CFG 1 */
 	{ 0x0000000B, 0x0036 },    /* R11    - Ctrl IF I2C1 CFG 2 */
 	{ 0x0000000C, 0x0036 },    /* R12    - Ctrl IF I2C2 CFG 2 */
-	{ 0x00000016, 0x0000 },    /* R22    - Write Sequencer Ctrl 0 */
-	{ 0x00000017, 0x0000 },    /* R23    - Write Sequencer Ctrl 1 */
-	{ 0x00000018, 0x0000 },    /* R24    - Write Sequencer Ctrl 2 */
 	{ 0x00000020, 0x0000 },    /* R32    - Tone Generator 1 */
 	{ 0x00000021, 0x1000 },    /* R33    - Tone Generator 2 */
 	{ 0x00000022, 0x0000 },    /* R34    - Tone Generator 3 */
@@ -2815,6 +2812,9 @@ static bool wm5110_volatile_register(struct device *dev, unsigned int reg)
 	switch (reg) {
 	case ARIZONA_SOFTWARE_RESET:
 	case ARIZONA_DEVICE_REVISION:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_0:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_1:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_2:
 	case ARIZONA_HAPTICS_STATUS:
 	case ARIZONA_SAMPLE_RATE_1_STATUS:
 	case ARIZONA_SAMPLE_RATE_2_STATUS:
Signature · 1 line
1.7.2.5
#2 lore raw
In reply to Charles Keepax
Quoted 9 lines · Charles Keepax

From: Mark Brown <[email protected]>

During init the core checks if the wm5102 has finished starting by reading register 0x19 and looking at the value. This read always fails since this is not a readable register, mark it as being one. While we're at it provide a constant for the register name (as supplied by Charles Keepax).

---

If you're resending my patch you need to add your own signoff.