Skip to contentSkip to conversation

drm/i915: Move vblank enable earlier and disable later

PATCH In review [email protected] 2 participants 2 messages Aug 14, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/i915: Move vblank enable earlier and disable later

From: Ville Syrjälä <[email protected]>

We changed to an interrupt based vblank wait (as opposed to polling) in:
commit 44bd93a3d367913d883be6abba9a6e51a53c4e90
Author: Daniel Vetter <[email protected]>
Date: Fri Jul 25 23:36:44 2014 +0200

drm/i915: Use generic vblank wait

However we already had vblank waits on the wrong side of drm_vblank_{on,off}() calls due to various workarounds, so now we get a warning more or less every time we do a modeset, and we fail to wait for the vblank like we should.

Move the drm_vblank_{on,off}() calls back out from intel_crtc_{enable,disable}_planes() so that all of these vblank waits return to proper operation. Also move the cxsr wait a bit earlier so that we can keep the encoder disable after we've turned off vblanks. Moving stuff out from the plane enable/disable functions seems preferrable to moving the workaround stuff in since the workarounds are required only on specific platforms.

While at it switch over to the drm_crtc_ variants of the vblank on/off functions.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82525
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82490

---
 drivers/gpu/drm/i915/intel_display.c | 35 ++++++++++++++++++++++++-----------
 1 file changed, 24 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/intel_display.c +24 -11
index 3813526..970c2ab 100644
@@ -3845,10 +3845,6 @@ static void intel_crtc_enable_planes(struct drm_crtc *crtc)
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	int pipe = intel_crtc->pipe;
 
-	assert_vblank_disabled(crtc);
-
-	drm_vblank_on(dev, pipe);
-
 	intel_enable_primary_hw_plane(crtc->primary, crtc);
 	intel_enable_planes(crtc);
 	intel_crtc_update_cursor(crtc, true);
@@ -3894,10 +3890,6 @@ static void intel_crtc_disable_planes(struct drm_crtc *crtc)
 	 * consider this a flip to a NULL plane.
 	 */
 	intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_ALL_MASK(pipe));
-
-	drm_vblank_off(dev, pipe);
-
-	assert_vblank_disabled(crtc);
 }
 
 static void ironlake_crtc_enable(struct drm_crtc *crtc)
@@ -3967,6 +3959,9 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 	if (HAS_PCH_CPT(dev))
 		cpt_verify_modeset(dev, intel_crtc->pipe);
 
+	assert_vblank_disabled(crtc);
+	drm_crtc_vblank_on(crtc);
+
 	intel_crtc_enable_planes(crtc);
 }
 
@@ -4074,6 +4069,9 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 		intel_opregion_notify_encoder(encoder, true);
 	}
 
+	assert_vblank_disabled(crtc);
+	drm_crtc_vblank_on(crtc);
+
 	/* If we change the relative order between pipe/planes enabling, we need
 	 * to change the workaround. */
 	haswell_mode_set_planes_workaround(intel_crtc);
@@ -4109,6 +4107,9 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
 
 	intel_crtc_disable_planes(crtc);
 
+	drm_crtc_vblank_off(crtc);
+	assert_vblank_disabled(crtc);
+
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		encoder->disable(encoder);
 
@@ -4175,6 +4176,9 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
 
 	intel_crtc_disable_planes(crtc);
 
+	drm_crtc_vblank_off(crtc);
+	assert_vblank_disabled(crtc);
+
 	for_each_encoder_on_crtc(dev, crtc, encoder) {
 		intel_opregion_notify_encoder(encoder, false);
 		encoder->disable(encoder);
@@ -4638,6 +4642,9 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		encoder->enable(encoder);
 
+	assert_vblank_disabled(crtc);
+	drm_crtc_vblank_on(crtc);
+
 	intel_crtc_enable_planes(crtc);
 
 	/* Underruns don't raise interrupts, so check manually. */
@@ -4695,6 +4702,9 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		encoder->enable(encoder);
 
+	assert_vblank_disabled(crtc);
+	drm_crtc_vblank_on(crtc);
+
 	intel_crtc_enable_planes(crtc);
 
 	/*
@@ -4758,9 +4768,6 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
 	intel_set_memory_cxsr(dev_priv, false);
 	intel_crtc_disable_planes(crtc);
 
-	for_each_encoder_on_crtc(dev, crtc, encoder)
-		encoder->disable(encoder);
-
 	/*
 	 * On gen2 planes are double buffered but the pipe isn't, so we must
 	 * wait for planes to fully turn off before disabling the pipe.
@@ -4769,6 +4776,12 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
 	 */
 	intel_wait_for_vblank(dev, pipe);
 
+	drm_crtc_vblank_off(crtc);
+	assert_vblank_disabled(crtc);
+
+	for_each_encoder_on_crtc(dev, crtc, encoder)
+		encoder->disable(encoder);
+
 	intel_disable_pipe(dev_priv, pipe);
 
 	i9xx_pfit_disable(intel_crtc);
Signature · 6 lines
1.8.5.5

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw
Quoted 23 lines · On Thu, Aug 14, 2014 at 10:04:37PM +0300, [email protected] wrote:

From: Ville Syrjälä <[email protected]>

We changed to an interrupt based vblank wait (as opposed to polling) in:
commit 44bd93a3d367913d883be6abba9a6e51a53c4e90
Author: Daniel Vetter <[email protected]>
Date: Fri Jul 25 23:36:44 2014 +0200

drm/i915: Use generic vblank wait

However we already had vblank waits on the wrong side of drm_vblank_{on,off}() calls due to various workarounds, so now we get a warning more or less every time we do a modeset, and we fail to wait for the vblank like we should.

Move the drm_vblank_{on,off}() calls back out from intel_crtc_{enable,disable}_planes() so that all of these vblank waits return to proper operation. Also move the cxsr wait a bit earlier so that we can keep the encoder disable after we've turned off vblanks. Moving stuff out from the plane enable/disable functions seems preferrable to moving the workaround stuff in since the workarounds are required only on specific platforms.

Quoted 7 lines

While at it switch over to the drm_crtc_ variants of the vblank on/off functions.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82525
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82490

I've dropped the offending patch temporarily and picked up yours here into my atomic branch - currently there's too many things unmerged to get this in. Thanks anyway for the patch.

Quoted 116 lines
---
 drivers/gpu/drm/i915/intel_display.c | 35 ++++++++++++++++++++++++-----------
 1 file changed, 24 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/intel_display.c +24 -11
index 3813526..970c2ab 100644
@@ -3845,10 +3845,6 @@ static void intel_crtc_enable_planes(struct drm_crtc *crtc)
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	int pipe = intel_crtc->pipe;
 
-	assert_vblank_disabled(crtc);
-
-	drm_vblank_on(dev, pipe);
-
 	intel_enable_primary_hw_plane(crtc->primary, crtc);
 	intel_enable_planes(crtc);
 	intel_crtc_update_cursor(crtc, true);
@@ -3894,10 +3890,6 @@ static void intel_crtc_disable_planes(struct drm_crtc *crtc)
 	 * consider this a flip to a NULL plane.
 	 */
 	intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_ALL_MASK(pipe));
-
-	drm_vblank_off(dev, pipe);
-
-	assert_vblank_disabled(crtc);
 }
 
 static void ironlake_crtc_enable(struct drm_crtc *crtc)
@@ -3967,6 +3959,9 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 	if (HAS_PCH_CPT(dev))
 		cpt_verify_modeset(dev, intel_crtc->pipe);
 
+	assert_vblank_disabled(crtc);
+	drm_crtc_vblank_on(crtc);
+
 	intel_crtc_enable_planes(crtc);
 }
 
@@ -4074,6 +4069,9 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 		intel_opregion_notify_encoder(encoder, true);
 	}
 
+	assert_vblank_disabled(crtc);
+	drm_crtc_vblank_on(crtc);
+
 	/* If we change the relative order between pipe/planes enabling, we need
 	 * to change the workaround. */
 	haswell_mode_set_planes_workaround(intel_crtc);
@@ -4109,6 +4107,9 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
 
 	intel_crtc_disable_planes(crtc);
 
+	drm_crtc_vblank_off(crtc);
+	assert_vblank_disabled(crtc);
+
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		encoder->disable(encoder);
 
@@ -4175,6 +4176,9 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
 
 	intel_crtc_disable_planes(crtc);
 
+	drm_crtc_vblank_off(crtc);
+	assert_vblank_disabled(crtc);
+
 	for_each_encoder_on_crtc(dev, crtc, encoder) {
 		intel_opregion_notify_encoder(encoder, false);
 		encoder->disable(encoder);
@@ -4638,6 +4642,9 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		encoder->enable(encoder);
 
+	assert_vblank_disabled(crtc);
+	drm_crtc_vblank_on(crtc);
+
 	intel_crtc_enable_planes(crtc);
 
 	/* Underruns don't raise interrupts, so check manually. */
@@ -4695,6 +4702,9 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		encoder->enable(encoder);
 
+	assert_vblank_disabled(crtc);
+	drm_crtc_vblank_on(crtc);
+
 	intel_crtc_enable_planes(crtc);
 
 	/*
@@ -4758,9 +4768,6 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
 	intel_set_memory_cxsr(dev_priv, false);
 	intel_crtc_disable_planes(crtc);
 
-	for_each_encoder_on_crtc(dev, crtc, encoder)
-		encoder->disable(encoder);
-
 	/*
 	 * On gen2 planes are double buffered but the pipe isn't, so we must
 	 * wait for planes to fully turn off before disabling the pipe.
@@ -4769,6 +4776,12 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
 	 */
 	intel_wait_for_vblank(dev, pipe);
 
+	drm_crtc_vblank_off(crtc);
+	assert_vblank_disabled(crtc);
+
+	for_each_encoder_on_crtc(dev, crtc, encoder)
+		encoder->disable(encoder);
+
 	intel_disable_pipe(dev_priv, pipe);
 
 	i9xx_pfit_disable(intel_crtc);
Signature · 1 line
1.8.5.5
Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch