Skip to contentSkip to conversation

Sanity tested distributions list

DISCUSSION Paul Eggleton 7 participants 11 messages Dec 6, 2011 – Dec 12, 2011

lore
Share & tools
lore
#0 lore raw

Hi all,

We had some discussions [1] [2] about this last cycle but I don't feel we reached a proper conclusion on the list of tested distributions we want to set (SANITY_TESTED_DISTROS) and I assume we want to support a few more distros (latest versions of Fedora & Ubuntu, presumably?). I'd like to update and re- post the patch [3] so we can close bug #1096 [4] but for that we need to agree on the list.

Thanks,
Paul

[1] https://lists.yoctoproject.org/pipermail/yocto/2011-August/004699.html

[2] http://article.gmane.org/gmane.linux.embedded.poky/6959

[3] http://git.yoctoproject.org/cgit/cgit.cgi/poky-
contrib/log/?h=paule/sanity-distros

[4] http://bugzilla.pokylinux.org/show_bug.cgi?id=1096

Signature · 2 lines
Paul Eggleton
Intel Open Source Technology Centre
#1 lore raw
Quoted 8 lines · Paul Eggleton

Hi all,

We had some discussions [1] [2] about this last cycle but I don't feel we reached a proper conclusion on the list of tested distributions we want to set (SANITY_TESTED_DISTROS) and I assume we want to support a few more distros (latest versions of Fedora & Ubuntu, presumably?). I'd like to update and re- post the patch [3] so we can close bug #1096 [4] but for that we need to agree on the list.

I'm fairly comprehensively testing something close to the edison 1.1.1 release on CentOS 5.5 and Ubuntu 10.04 LTS. We plan on adding more but maybe not in time for our next release.

-M

#2 lore raw
Quoted 10 lines · On Tue, Dec 6, 2011 at 7:59 AM, McClintock Matthew-B29882 <…
Quoted 4 lines · Paul Eggleton

Hi all,

We had some discussions [1] [2] about this last cycle but I don't feel we reached a proper conclusion on the list of tested distributions we want

to set

Quoted 1 line

(SANITY_TESTED_DISTROS) and I assume we want to support a few more

distros

Quoted 1 line

(latest versions of Fedora & Ubuntu, presumably?). I'd like to update

Quoted 9 lines

and re-

Quoted 1 line

post the patch [3] so we can close bug #1096 [4] but for that we need to

agree

Quoted 1 line

on the list.

I'm fairly comprehensively testing something close to the edison 1.1.1 release on CentOS 5.5 and Ubuntu 10.04 LTS. We plan on adding more but maybe not in time for our next release.

The autobuilders are on openSuSE 11.4 x86-64 at this point. We lost I'm testing on Ubuntu 10.10 (with a planned switch over on one dev machine to openSuSE 12.1)

-b

Quoted 6 lines

-M
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

Signature · 3 lines
Elizabeth Flanagan
Yocto Project
Build and Release
#3 lore raw
Quoted 3 lines · Elizabeth

The autobuilders are on openSuSE 11.4 x86-64 at this point. We lost I'm testing on Ubuntu 10.10 (with a planned switch over on one dev machine to openSuSE 12.1)

Sorry, what did we lose?

Cheers,
Paul

Signature · 2 lines
Paul Eggleton
Intel Open Source Technology Centre
#4 lore raw

On Tue, Dec 6, 2011 at 9:09 AM, Paul Eggleton <[email protected]

Quoted 9 lines

wrote:

Quoted 2 lines · Elizabeth

The autobuilders are on openSuSE 11.4 x86-64 at this point. We lost I'm testing on Ubuntu 10.10 (with a planned switch over on one dev

machine

Quoted 1 line

to openSuSE 12.1)

heh, multitasking.

We've standardized the distro on the ab infrastructure, so we lost the host testing (for now) that the ab provided. We'll be gaining that back when I move the ab slaves to VMs, but for the time being, we're only host testing opensuse on the abs

Quoted 10 lines

Sorry, what did we lose?

Cheers,
Paul

--

Paul Eggleton
Intel Open Source Technology Centre

Signature · 3 lines
Elizabeth Flanagan
Yocto Project
Build and Release
#5 lore raw
In reply to McClintock Matthew-B29882
Quoted 10 lines · On Tuesday 06 December 2011 15:59:39 McClintock Matthew-B29882 wrote:
Quoted 7 lines · Paul Eggleton

We had some discussions [1] [2] about this last cycle but I don't feel we
reached a proper conclusion on the list of tested distributions we want to set (SANITY_TESTED_DISTROS) and I assume we want to support a few more distros (latest versions of Fedora & Ubuntu, presumably?). I'd like to update and re- post the patch [3] so we can close bug #1096 [4] but for that we need to agree on the list.

Quoted 3 lines

I'm fairly comprehensively testing something close to the edison 1.1.1 release on CentOS 5.5 and Ubuntu 10.04 LTS. We plan on adding more but maybe not in time for our next release.

I can definitely see a compelling reason to mark CentOS 5.x as supported, but the problem with it is it doesn't come with Python 2.6, so BitBake won't work out of the box (actually right now it fails before it has a chance to show a reasonable error message, which is even worse). We really need a concise set of instructions on how to install the external python tarball, at the moment I don't think we have these.

Did you need to perform any other special steps on either of these distributions?

Cheers,
Paul

Signature · 2 lines
Paul Eggleton
Intel Open Source Technology Centre
#6 lore raw
Quoted 6 lines · Paul Eggleton

I can definitely see a compelling reason to mark CentOS 5.x as supported, but the problem with it is it doesn't come with Python 2.6, so BitBake won't work out of the box (actually right now it fails before it has a chance to show a reasonable error message, which is even worse). We really need a concise set of instructions on how to install the external python tarball, at the moment I don't think we have these.

It's been a while since I wrote them, and therefore since I tested them, but:
https://wiki.yoctoproject.org/wiki/Poky/GettingStarted/Dependencies

Joshua

Signature · 3 lines
Joshua Lock
        Yocto Project "Johannes factotum"
        Intel Open Source Technology Centre
#7 lore raw
In reply to Paul Eggleton
Quoted 15 lines · Paul Eggleton
Quoted 10 lines · On Tuesday 06 December 2011 15:59:39 McClintock Matthew-B29882 wrote:
Quoted 7 lines · Paul Eggleton

We had some discussions [1] [2] about this last cycle but I don't feel we
reached a proper conclusion on the list of tested distributions we want to set (SANITY_TESTED_DISTROS) and I assume we want to support a few more distros (latest versions of Fedora & Ubuntu, presumably?). I'd like to update and re- post the patch [3] so we can close bug #1096 [4] but for that we need to agree on the list.

Quoted 3 lines

I'm fairly comprehensively testing something close to the edison 1.1.1 release on CentOS 5.5 and Ubuntu 10.04 LTS. We plan on adding more but maybe not in time for our next release.

Quoted 6 lines

I can definitely see a compelling reason to mark CentOS 5.x as supported, but the problem with it is it doesn't come with Python 2.6, so BitBake won't work out of the box (actually right now it fails before it has a chance to show a reasonable error message, which is even worse). We really need a concise set of instructions on how to install the external python tarball, at the moment I don't think we have these.

EPEL has a python26 RPM which works perfectly well if you add a ~/bin/python symlink to python26. No need to compile python from scratch.
--
Michael

#8 lore raw
In reply to Paul Eggleton
Quoted 22 lines · Paul Eggleton
Quoted 10 lines · On Tuesday 06 December 2011 15:59:39 McClintock Matthew-B29882 wrote:
Quoted 7 lines · Paul Eggleton

We had some discussions [1] [2] about this last cycle but I don't feel we
reached a proper conclusion on the list of tested distributions we want to set (SANITY_TESTED_DISTROS) and I assume we want to support a few more distros (latest versions of Fedora & Ubuntu, presumably?). I'd like to update and re- post the patch [3] so we can close bug #1096 [4] but for that we need to agree on the list.

Quoted 3 lines

I'm fairly comprehensively testing something close to the edison 1.1.1 release on CentOS 5.5 and Ubuntu 10.04 LTS. We plan on adding more but maybe not in time for our next release.

I can definitely see a compelling reason to mark CentOS 5.x as supported, but the problem with it is it doesn't come with Python 2.6, so BitBake won't work out of the box (actually right now it fails before it has a chance to show a reasonable error message, which is even worse). We really need a concise set of instructions on how to install the external python tarball, at the moment I don't think we have these.

Quoted 2 lines

Did you need to perform any other special steps on either of these distributions?

I'm not 100% sure what I did to bring up our CentOS box but I think all I needed was to install python 2.6.

-M

#9 lore raw
In reply to Paul Eggleton

2011/12/6 Paul Eggleton <[email protected]>:

Quoted 8 lines

Hi all,

We had some discussions [1] [2] about this last cycle but I don't feel we reached a proper conclusion on the list of tested distributions we want to set (SANITY_TESTED_DISTROS) and I assume we want to support a few more distros (latest versions of Fedora & Ubuntu, presumably?). I'd like to update and re- post the patch [3] so we can close bug #1096 [4] but for that we need to agree on the list.

BTW, what may I do to add Debian Squeeze (6.0) to supported and tested distributions list?

Signature · 1 line
Yury Bushmelev
#10 lore raw
In reply to Paul Eggleton

On Dec 6, 2011, at 9:43 AM, Paul Eggleton wrote:

Hi all,

We had some discussions [1] [2] about this last cycle but I don't feel we reached a proper conclusion on the list of tested distributions we want to set (SANITY_TESTED_DISTROS) and I assume we want to support a few more distros (latest versions of Fedora & Ubuntu, presumably?). I'd like to update and re- post the patch [3] so we can close bug #1096 [4] but for that we need to agree on the list.

Thanks,
Paul

[1] https://lists.yoctoproject.org/pipermail/yocto/2011-August/004699.html

[2] http://article.gmane.org/gmane.linux.embedded.poky/6959

[3] http://git.yoctoproject.org/cgit/cgit.cgi/poky-
contrib/log/?h=paule/sanity-distros

[4] http://bugzilla.pokylinux.org/show_bug.cgi?id=1096

Signature · 29 lines
Paul Eggleton
Intel Open Source Technology Centre
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

You may not be looking for anecdotal build data but I imagine I'm one of the few building on FC 16.

Through an unintentional upgrade (don't ask), I have built and tested the following combinations to boot on actual hardware built on a Fedora Core 16 host:

On a Routerstation Pro:
Core image minimal
Core image basic
Core image base (both USB Root file system and SD root file system)
demo-image-mediatomb (but mediatomb itself segfaults in initialization)

On a Beagleboard
Core Image Sato (with Linksys USB network adapter functioning)
demo-image-mediatomb (mediatomb does not segfault).

I'm having some trouble on the Atom platform but I think it is operator error, not host platform.

David



David Smoot
[email protected]