Skip to contentSkip to conversation

nettle: update nettle to version 3.0

PATCH In review Armin Kuster 3 participants 7 messages Aug 17, 2014 – Aug 21, 2014

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 nettle: update nettle to version 3.0

With this update, LGPLv3 or GPLv3 where added to many files. Each supported algorithms govern which license they want. Many are stated as "ether v2 or v3 or both in parallel". Update license to be v2 or LGPLv3 or GPLv3.

The previous verion had one GPLv3 file so the license was incorrect.

---
 .../nettle/{nettle_2.7.1.bb => nettle_3.0.bb}             | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)
 rename meta/recipes-support/nettle/{nettle_2.7.1.bb => nettle_3.0.bb} (53%)
meta/recipes-support/nettle/nettle_3.0.bb renamed from meta/recipes-support/nettle/nettle_2.7.1.bb +8 -7
similarity index 53%
rename from meta/recipes-support/nettle/nettle_2.7.1.bb
rename to meta/recipes-support/nettle/nettle_3.0.bb
index f53afcc..a54317f 100644
@@ -1,17 +1,18 @@
 SUMMARY = "A low level cryptographic library"
 HOMEPAGE = "http://www.lysator.liu.se/~nisse/nettle/"
 SECTION = "libs"
-LICENSE = "LGPLv2.1 & GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING.LIB;md5=2d5025d4aa3495befef8f17206a5b0a1 \
-                    file://serpent-decrypt.c;beginline=53;endline=67;md5=bcfd4745d53ca57f82907089898e390d \
-                    file://serpent-set-key.c;beginline=56;endline=70;md5=bcfd4745d53ca57f82907089898e390d"
-
+LICENSE = "LGPLv2.1 & GPLv2 | LGPLv3 | GPLv3"
+LIC_FILES_CHKSUM = "file://COPYINGv2;md5=b234ee4d69f5fce4486a80fdaf4a4263\
+                    file://COPYING.LESSERv3;md5=6a6a8e020838b23406c81b19c1d46df6\
+                    file://COPYINGv3;md5=11cc2d3ee574f9d6b7ee797bdce4d423\
+                    file://serpent-decrypt.c;beginline=53;endline=67;md5=a4ccbeb343203d3586661f45c1cab577 \
+                    file://serpent-set-key.c;beginline=56;endline=70;md5=150b0ea44cdfb712a83331bff566e9a8"
 DEPENDS += "gmp"
 
 SRC_URI = "http://www.lysator.liu.se/~nisse/archive/${BP}.tar.gz"
 
-SRC_URI[md5sum] = "003d5147911317931dd453520eb234a5"
-SRC_URI[sha256sum] = "bc71ebd43435537d767799e414fce88e521b7278d48c860651216e1fc6555b40"
+SRC_URI[md5sum] = "f64b1bf1e774b7ae6e507318e340250e"
+SRC_URI[sha256sum] = "9651c0bd2326eb737d0ed9eb403444712407c01a25b0fe813432ef31bebcd913"
 
 EXTRA_OECONF = "--disable-openssl"
 
Signature · 1 line
1.9.1
#1 lore raw
Quoted 6 lines · Armin Kuster

With this update, LGPLv3 or GPLv3 where added to many files. Each supported algorithms govern which license they want. Many are stated as "ether v2 or v3 or both in parallel". Update license to be v2 or LGPLv3 or GPLv3.

The previous verion had one GPLv3 file so the license was incorrect.

With this change, "bitbke gnutls" stops working.

Cheers,

Richard

author
#2 lore raw
Quoted 9 lines · Richard Purdie
Quoted 6 lines · Armin Kuster

With this update, LGPLv3 or GPLv3 where added to many files. Each supported algorithms govern which license they want. Many are stated as "ether v2 or v3 or both in parallel". Update license to be v2 or LGPLv3 or GPLv3.

The previous verion had one GPLv3 file so the license was incorrect.

With this change, "bitbke gnutls" stops working.

dang.

I will look into it.

- Armin

Quoted 5 lines

Cheers,

Richard

author
#3 lore raw
In reply to Richard Purdie
Quoted 10 lines · Richard Purdie
Quoted 6 lines · Armin Kuster

With this update, LGPLv3 or GPLv3 where added to many files. Each supported algorithms govern which license they want. Many are stated as "ether v2 or v3 or both in parallel". Update license to be v2 or LGPLv3 or GPLv3.

The previous verion had one GPLv3 file so the license was incorrect.

With this change, "bitbke gnutls" stops working.

gnutls is targeting to port to nettle 3.0 in gnutls version 3.4.

what should I do?

- Armin

Quoted 4 lines

Cheers,

Richard

#4 lore raw
Quoted 14 lines · On Thu, Aug 21, 2014 at 11:33 AM, akuster808 <[email protected]> wrote:
Quoted 11 lines · Richard Purdie
Quoted 7 lines · Armin Kuster

With this update, LGPLv3 or GPLv3 where added to many files. Each supported algorithms govern which license they want. Many are stated as "ether v2 or v3 or both in parallel". Update license to be v2 or LGPLv3 or GPLv3.

The previous verion had one GPLv3 file so the license was incorrect.

Quoted 6 lines
Quoted 2 lines

With this change, "bitbke gnutls" stops working.

gnutls is targeting to port to nettle 3.0 in gnutls version 3.4.

what should I do?

Revert for now? :)

Signature · 3 lines
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750
author
#5 lore raw
Quoted 15 lines · Otavio Salvador
Quoted 14 lines · On Thu, Aug 21, 2014 at 11:33 AM, akuster808 <[email protected]> wrote:
Quoted 11 lines · Richard Purdie
Quoted 7 lines · Armin Kuster

With this update, LGPLv3 or GPLv3 where added to many files. Each supported algorithms govern which license they want. Many are stated as "ether v2 or v3 or both in parallel". Update license to be v2 or LGPLv3 or GPLv3.

The previous verion had one GPLv3 file so the license was incorrect.

Quoted 8 lines
Quoted 6 lines
Quoted 2 lines

With this change, "bitbke gnutls" stops working.

gnutls is targeting to port to nettle 3.0 in gnutls version 3.4.

what should I do?

Revert for now? :)

Its only in the patch queue from what i can tell. Do I ask for it to be dropped or do send a 'revert' patch for the patch?

- Armin

#6 lore raw
Quoted 20 lines · On Thu, 2014-08-21 at 12:27 -0700, akuster808 wrote:
Quoted 18 lines · Otavio Salvador
Quoted 17 lines · On Thu, Aug 21, 2014 at 11:33 AM, akuster808 <[email protected]> wrote:
Quoted 13 lines · Richard Purdie
Quoted 7 lines · Armin Kuster

With this update, LGPLv3 or GPLv3 where added to many files. Each supported algorithms govern which license they want. Many are stated as "ether v2 or v3 or both in parallel". Update license to be v2 or LGPLv3 or GPLv3.

The previous verion had one GPLv3 file so the license was incorrect.

With this change, "bitbke gnutls" stops working.

Quoted 8 lines
Quoted 5 lines
Quoted 3 lines

gnutls is targeting to port to nettle 3.0 in gnutls version 3.4.

what should I do?

Revert for now? :)

Its only in the patch queue from what i can tell. Do I ask for it to be dropped or do send a 'revert' patch for the patch?

It didn't make it into master, so no, nothing to be done.

Cheers,

Richard