drm/i915: fix panel unlock register mask
Subsystems (2)
PATCH 1/2 drm/i915: fix panel unlock register mask
Use the correct mask for the unlock bits. In theory this could have lead to incorrect asserts but this is unlikely in practise.
--- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_display.c +1 -1
@@ -1208,7 +1208,7 @@ static void assert_panel_unlocked(struct drm_i915_private *dev_priv, val =I915_READ (pp_reg);if (!(val &PANEL_POWER_ON ) || - ((val &PANEL_UNLOCK_REGS ) ==PANEL_UNLOCK_REGS )) + ((val &PANEL_UNLOCK_MASK ) ==PANEL_UNLOCK_REGS )) locked = false;if (I915_READ (lvds_reg) &LVDS_PIPEB_SELECT )
Signature · 1 line
1.9.1
PATCH 2/2 drm/i915: improve assert_panel_unlocked
Fix assert_panel_unlocked for vlv/chv, and improve it a bit for non-LVDS. Also don't pretend it works for DDI. There's still work to do to get this right for eDP on PCH platforms, but this is a start.
---
So I wanted to quickly fix assert_panel_unlocked, but for such a short piece of code it's too involved to _quickly_ get right across all platforms. I think this is a worthwhile improvement though.
--- drivers/gpu/drm/i915/intel_display.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/intel_display.c +20 -7
@@ -1193,17 +1193,33 @@ void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,static void assert_panel_unlocked (struct drm_i915_private *dev_priv,enum pipe pipe) { -int pp_reg, lvds_reg; +struct drm_device *dev = dev_priv->dev; +int pp_reg;u32 val;enum pipe panel_pipe =PIPE_A ;bool locked = true; -if (HAS_PCH_SPLIT (dev_priv->dev)) { +if (HAS_DDI (dev)) { +/* XXX: this neither works nor gets called for DDI */ +return ; + }else if (HAS_PCH_SPLIT (dev)) { +u32 port_sel; + pp_reg =PCH_PP_CONTROL ; - lvds_reg =PCH_LVDS ; + port_sel =I915_READ (PCH_PP_ON_DELAYS ) &PANEL_PORT_SELECT_MASK ; + +if (port_sel ==PANEL_PORT_SELECT_LVDS && +I915_READ (PCH_LVDS ) &LVDS_PIPEB_SELECT ) + panel_pipe =PIPE_B ; +/* XXX: else fix for eDP */ + }else if (IS_VALLEYVIEW (dev)) { +/* presumably write lock depends on pipe, not port select */ + pp_reg =VLV_PIPE_PP_CONTROL (pipe); + panel_pipe = pipe; }else { pp_reg =PP_CONTROL ; - lvds_reg =LVDS ; +if (I915_READ (LVDS ) &LVDS_PIPEB_SELECT ) + panel_pipe =PIPE_B ; } val =I915_READ (pp_reg);
@@ -1211,9 +1227,6 @@ static void assert_panel_unlocked(struct drm_i915_private *dev_priv, ((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS)) locked = false; -if (I915_READ (lvds_reg) &LVDS_PIPEB_SELECT ) - panel_pipe =PIPE_B ; -WARN (panel_pipe == pipe && locked,"panel assertion failure, pipe %c regs locked\n" ,pipe_name (pipe));
Signature · 1 line
1.9.1
Re: [PATCH 2/2] drm/i915: improve assert_panel_unlocked
Quoted 23 lines · Jani Nikula
Fix
assert_panel_unlockedfor vlv/chv, and improve it a bit for non-LVDS. Also don't pretend it works for DDI. There's still work to do to get this right for eDP on PCH platforms, but this is a start.Signed-off-by Jani Nikula <[email protected]>---
So I wanted to quickly fix
assert_panel_unlocked, but for such a short piece of code it's too involved to _quickly_ get right across all platforms. I think this is a worthwhile improvement though.--- drivers/gpu/drm/i915/intel_display.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-)drivers/gpu/drm/i915/intel_display.c +0
-0@@ -1193,17 +1193,33 @@ void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,static void assert_panel_unlocked (struct drm_i915_private *dev_priv,enum pipe pipe) {
drivers/gpu/drm/i915/intel_display.c void assert_fdi_rx_pll(struct drm_i915_private *dev_priv, · line 1203
Quoted 10 lines
drivers/gpu/drm/i915/intel_display.c +4
-2-int pp_reg, lvds_reg; +struct drm_device *dev = dev_priv->dev; +int pp_reg;u32 val;enum pipe panel_pipe =PIPE_A ;bool locked = true; -if (HAS_PCH_SPLIT (dev_priv->dev)) { +if (HAS_DDI (dev)) { +/* XXX: this neither works nor gets called for DDI */
Not sure why the XXX here. Seems to me there's nothing to fix here for DDI. Maybe just make that a WARN_ON(HAS_DDI()) or just remove the check entirely.
Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c +4
-0+return ; + }else if (HAS_PCH_SPLIT (dev)) { +u32 port_sel; +
drivers/gpu/drm/i915/intel_display.c void assert_fdi_rx_pll(struct drm_i915_private *dev_priv, · line 1216
Quoted 10 lines
drivers/gpu/drm/i915/intel_display.c +8
-1pp_reg =PCH_PP_CONTROL ; - lvds_reg =PCH_LVDS ; + port_sel =I915_READ (PCH_PP_ON_DELAYS ) &PANEL_PORT_SELECT_MASK ; + +if (port_sel ==PANEL_PORT_SELECT_LVDS && +I915_READ (PCH_LVDS ) &LVDS_PIPEB_SELECT ) + panel_pipe =PIPE_B ; +/* XXX: else fix for eDP */ + }else if (IS_VALLEYVIEW (dev)) { +/* presumably write lock depends on pipe, not port select */
Hmm. This is a good question. Needs a bit if testing I suppose. In the worst case it somehow gets tied in with how the power sequencer gets locked to the port. For that we'd probably just have to check both power sequencers here and complain if either has the registers locked. Or maybe we should just do that anyway because it's such a simple solution? But we could do that simply by calling assert_panel_unlocked() twice (once for each pipe) from VLV specific code, so this patch seems to be exactly what we need as a first step.
Apart from the XXX in the comment:
Quoted 27 lines
drivers/gpu/drm/i915/intel_display.c +4
-4+ pp_reg =VLV_PIPE_PP_CONTROL (pipe); + panel_pipe = pipe; }else { pp_reg =PP_CONTROL ; - lvds_reg =LVDS ; +if (I915_READ (LVDS ) &LVDS_PIPEB_SELECT ) + panel_pipe =PIPE_B ; } val =I915_READ (pp_reg);@@ -1211,9 +1227,6 @@ static void assert_panel_unlocked(struct drm_i915_private *dev_priv, ((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS)) locked = false; -if (I915_READ (lvds_reg) &LVDS_PIPEB_SELECT ) - panel_pipe =PIPE_B ; -WARN (panel_pipe == pipe && locked,"panel assertion failure, pipe %c regs locked\n" ,pipe_name (pipe));Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 2 lines
Ville Syrjälä Intel OTC
Re: [PATCH 2/2] drm/i915: improve assert_panel_unlocked
2014-08-21 11:56 GMT-03:00 Ville Syrjälä <[email protected]>:
Quoted 31 lines · Jani Nikula
Quoted 30 lines
Fix
assert_panel_unlockedfor vlv/chv, and improve it a bit for non-LVDS. Also don't pretend it works for DDI. There's still work to do to get this right for eDP on PCH platforms, but this is a start.Signed-off-by Jani Nikula <[email protected]>---
So I wanted to quickly fix
assert_panel_unlocked, but for such a short piece of code it's too involved to _quickly_ get right across all platforms. I think this is a worthwhile improvement though.--- drivers/gpu/drm/i915/intel_display.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-)drivers/gpu/drm/i915/intel_display.c +2
-1@@ -1193,17 +1193,33 @@ void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,static void assert_panel_unlocked (struct drm_i915_private *dev_priv,enum pipe pipe) { -int pp_reg, lvds_reg; +struct drm_device *dev = dev_priv->dev; +int pp_reg;u32 val;enum pipe panel_pipe =PIPE_A ;bool locked = true;
Quoted 7 lines
drivers/gpu/drm/i915/intel_display.c void assert_fdi_rx_pll(struct drm_i915_private *dev_priv, · line 1203
Quoted 3 lines
drivers/gpu/drm/i915/intel_display.c +2
-1-if (HAS_PCH_SPLIT (dev_priv->dev)) { +if (HAS_DDI (dev)) { +/* XXX: this neither works nor gets called for DDI */ Not sure why the XXX here. Seems to me there's nothing to fix here for DDI. Maybe just make that a WARN_ON(HAS_DDI()) or just remove the check entirely.
As far as I remember, the "abcd" stuff is not even used/needed on DDI. But this is just what my memory tells me, it may be wrong. Someone needs to double-check.
Quoted 63 lines
Quoted 5 lines
drivers/gpu/drm/i915/intel_display.c +4
-0+return ; + }else if (HAS_PCH_SPLIT (dev)) { +u32 port_sel; +drivers/gpu/drm/i915/intel_display.c void assert_fdi_rx_pll(struct drm_i915_private *dev_priv, · line 1216
Quoted 10 lines
drivers/gpu/drm/i915/intel_display.c +8
-1pp_reg =PCH_PP_CONTROL ; - lvds_reg =PCH_LVDS ; + port_sel =I915_READ (PCH_PP_ON_DELAYS ) &PANEL_PORT_SELECT_MASK ; + +if (port_sel ==PANEL_PORT_SELECT_LVDS && +I915_READ (PCH_LVDS ) &LVDS_PIPEB_SELECT ) + panel_pipe =PIPE_B ; +/* XXX: else fix for eDP */ + }else if (IS_VALLEYVIEW (dev)) { +/* presumably write lock depends on pipe, not port select */ Hmm. This is a good question. Needs a bit if testing I suppose. In the worst case it somehow gets tied in with how the power sequencer gets locked to the port. For that we'd probably just have to check both power sequencers here and complain if either has the registers locked. Or maybe we should just do that anyway because it's such a simple solution? But we could do that simply by calling
assert_panel_unlocked()twice (once for each pipe) from VLV specific code, so this patch seems to be exactly what we need as a first step.Apart from the XXX in the comment:
Reviewed-by Ville Syrjälä <[email protected]>Quoted 23 lines
drivers/gpu/drm/i915/intel_display.c +4
-5+ pp_reg =VLV_PIPE_PP_CONTROL (pipe); + panel_pipe = pipe; }else { pp_reg =PP_CONTROL ; - lvds_reg =LVDS ; +if (I915_READ (LVDS ) &LVDS_PIPEB_SELECT ) + panel_pipe =PIPE_B ; } val =I915_READ (pp_reg);@@ -1211,9 +1227,6 @@ static void assert_panel_unlocked(struct drm_i915_private *dev_priv, ((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS)) locked = false; -if (I915_READ (lvds_reg) &LVDS_PIPEB_SELECT ) - panel_pipe =PIPE_B ; -WARN (panel_pipe == pipe && locked,"panel assertion failure, pipe %c regs locked\n" ,pipe_name (pipe)); --1.9.1
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 5 lines
Paulo Zanoni _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915: improve assert_panel_unlocked
Quoted 40 lines · Paulo Zanoni
2014-08-21 11:56 GMT-03:00 Ville Syrjälä <[email protected]>:
Quoted 31 lines · Jani Nikula
Quoted 30 lines
Fix
assert_panel_unlockedfor vlv/chv, and improve it a bit for non-LVDS. Also don't pretend it works for DDI. There's still work to do to get this right for eDP on PCH platforms, but this is a start.Signed-off-by Jani Nikula <[email protected]>---
So I wanted to quickly fix
assert_panel_unlocked, but for such a short piece of code it's too involved to _quickly_ get right across all platforms. I think this is a worthwhile improvement though.--- drivers/gpu/drm/i915/intel_display.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-)drivers/gpu/drm/i915/intel_display.c +2
-1@@ -1193,17 +1193,33 @@ void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,static void assert_panel_unlocked (struct drm_i915_private *dev_priv,enum pipe pipe) { -int pp_reg, lvds_reg; +struct drm_device *dev = dev_priv->dev; +int pp_reg;u32 val;enum pipe panel_pipe =PIPE_A ;bool locked = true;Quoted 7 lines
drivers/gpu/drm/i915/intel_display.c void assert_fdi_rx_pll(struct drm_i915_private *dev_priv, · line 1203
Quoted 3 lines
drivers/gpu/drm/i915/intel_display.c +2
-1-if (HAS_PCH_SPLIT (dev_priv->dev)) { +if (HAS_DDI (dev)) { +/* XXX: this neither works nor gets called for DDI */ Not sure why the XXX here. Seems to me there's nothing to fix here for DDI. Maybe just make that a WARN_ON(HAS_DDI()) or just remove the check entirely.
Quoted 3 lines
As far as I remember, the "abcd" stuff is not even used/needed on DDI. But this is just what my memory tells me, it may be wrong. Someone needs to double-check.
Bspec just says "spare" for those bits.
Quoted 69 lines
Quoted 64 lines
Quoted 6 lines
drivers/gpu/drm/i915/intel_display.c +4
-0+return ; + }else if (HAS_PCH_SPLIT (dev)) { +u32 port_sel; +drivers/gpu/drm/i915/intel_display.c void assert_fdi_rx_pll(struct drm_i915_private *dev_priv, · line 1216
Quoted 10 lines
drivers/gpu/drm/i915/intel_display.c +8
-1pp_reg =PCH_PP_CONTROL ; - lvds_reg =PCH_LVDS ; + port_sel =I915_READ (PCH_PP_ON_DELAYS ) &PANEL_PORT_SELECT_MASK ; + +if (port_sel ==PANEL_PORT_SELECT_LVDS && +I915_READ (PCH_LVDS ) &LVDS_PIPEB_SELECT ) + panel_pipe =PIPE_B ; +/* XXX: else fix for eDP */ + }else if (IS_VALLEYVIEW (dev)) { +/* presumably write lock depends on pipe, not port select */ Hmm. This is a good question. Needs a bit if testing I suppose. In the worst case it somehow gets tied in with how the power sequencer gets locked to the port. For that we'd probably just have to check both power sequencers here and complain if either has the registers locked. Or maybe we should just do that anyway because it's such a simple solution? But we could do that simply by calling
assert_panel_unlocked()twice (once for each pipe) from VLV specific code, so this patch seems to be exactly what we need as a first step.Apart from the XXX in the comment:
Reviewed-by Ville Syrjälä <[email protected]>Quoted 23 lines
drivers/gpu/drm/i915/intel_display.c +4
-5+ pp_reg =VLV_PIPE_PP_CONTROL (pipe); + panel_pipe = pipe; }else { pp_reg =PP_CONTROL ; - lvds_reg =LVDS ; +if (I915_READ (LVDS ) &LVDS_PIPEB_SELECT ) + panel_pipe =PIPE_B ; } val =I915_READ (pp_reg);@@ -1211,9 +1227,6 @@ static void assert_panel_unlocked(struct drm_i915_private *dev_priv, ((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS)) locked = false; -if (I915_READ (lvds_reg) &LVDS_PIPEB_SELECT ) - panel_pipe =PIPE_B ; -WARN (panel_pipe == pipe && locked,"panel assertion failure, pipe %c regs locked\n" ,pipe_name (pipe)); --1.9.1
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfxSignature · 1 line
Paulo Zanoni
Signature · 2 lines
Ville Syrjälä Intel OTC
Re: [PATCH 2/2] drm/i915: improve assert_panel_unlocked
Quoted 41 lines · Ville Syrjälä
Quoted 40 lines · Paulo Zanoni
2014-08-21 11:56 GMT-03:00 Ville Syrjälä <[email protected]>:
Quoted 38 lines · Jani Nikula
Quoted 23 lines
Fix
assert_panel_unlockedfor vlv/chv, and improve it a bit for non-LVDS. Also don't pretend it works for DDI. There's still work to do to get this right for eDP on PCH platforms, but this is a start.Signed-off-by Jani Nikula <[email protected]>---
So I wanted to quickly fix
assert_panel_unlocked, but for such a short piece of code it's too involved to _quickly_ get right across all platforms. I think this is a worthwhile improvement though.--- drivers/gpu/drm/i915/intel_display.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-)drivers/gpu/drm/i915/intel_display.c +0
-0@@ -1193,17 +1193,33 @@ void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,static void assert_panel_unlocked (struct drm_i915_private *dev_priv,enum pipe pipe) {drivers/gpu/drm/i915/intel_display.c void assert_fdi_rx_pll(struct drm_i915_private *dev_priv, · line 1203
Quoted 10 lines
drivers/gpu/drm/i915/intel_display.c +4
-2-int pp_reg, lvds_reg; +struct drm_device *dev = dev_priv->dev; +int pp_reg;u32 val;enum pipe panel_pipe =PIPE_A ;bool locked = true; -if (HAS_PCH_SPLIT (dev_priv->dev)) { +if (HAS_DDI (dev)) { +/* XXX: this neither works nor gets called for DDI */ Not sure why the XXX here. Seems to me there's nothing to fix here for DDI. Maybe just make that a WARN_ON(HAS_DDI()) or just remove the check entirely.
Quoted 5 lines
Quoted 3 lines
As far as I remember, the "abcd" stuff is not even used/needed on DDI. But this is just what my memory tells me, it may be wrong. Someone needs to double-check.
Bspec just says "spare" for those bits.
Iirc it's also not used for edp on older platforms, but only for lvds. There's definitely a lot of fun in this area ...
-Daniel
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
PATCH v2 2/2 drm/i915: improve assert_panel_unlocked
In reply to Jani NikulaFix assert_panel_unlocked for vlv/chv, and improve it a bit for non-LVDS. Also don't pretend it works for DDI. There's still work to do to get this right for eDP on PCH platforms, but this is a start.
v2: WARN_ON(HAS_DDI)
--- drivers/gpu/drm/i915/intel_display.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/intel_display.c +20 -7
@@ -1193,17 +1193,33 @@ void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,static void assert_panel_unlocked (struct drm_i915_private *dev_priv,enum pipe pipe) { -int pp_reg, lvds_reg; +struct drm_device *dev = dev_priv->dev; +int pp_reg;u32 val;enum pipe panel_pipe =PIPE_A ;bool locked = true; -if (HAS_PCH_SPLIT (dev_priv->dev)) { +if (WARN_ON (HAS_DDI (dev))) +return ; + +if (HAS_PCH_SPLIT (dev)) { +u32 port_sel; + pp_reg =PCH_PP_CONTROL ; - lvds_reg =PCH_LVDS ; + port_sel =I915_READ (PCH_PP_ON_DELAYS ) &PANEL_PORT_SELECT_MASK ; + +if (port_sel ==PANEL_PORT_SELECT_LVDS && +I915_READ (PCH_LVDS ) &LVDS_PIPEB_SELECT ) + panel_pipe =PIPE_B ; +/* XXX: else fix for eDP */ + }else if (IS_VALLEYVIEW (dev)) { +/* presumably write lock depends on pipe, not port select */ + pp_reg =VLV_PIPE_PP_CONTROL (pipe); + panel_pipe = pipe; }else { pp_reg =PP_CONTROL ; - lvds_reg =LVDS ; +if (I915_READ (LVDS ) &LVDS_PIPEB_SELECT ) + panel_pipe =PIPE_B ; } val =I915_READ (pp_reg);
@@ -1211,9 +1227,6 @@ static void assert_panel_unlocked(struct drm_i915_private *dev_priv, ((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS)) locked = false; -if (I915_READ (lvds_reg) &LVDS_PIPEB_SELECT ) - panel_pipe =PIPE_B ; -WARN (panel_pipe == pipe && locked,"panel assertion failure, pipe %c regs locked\n" ,pipe_name (pipe));
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
2014-08-21 9:06 GMT-03:00 Jani Nikula <[email protected]>:
Quoted 4 lines
Use the correct mask for the unlock bits. In theory this could have lead to incorrect asserts but this is unlikely in practise.
Signed-off-by Jani Nikula <[email protected]>
Quoted 24 lines
--- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/gpu/drm/i915/intel_display.c +1
-2@@ -1208,7 +1208,7 @@ static void assert_panel_unlocked(struct drm_i915_private *dev_priv, val =I915_READ (pp_reg);if (!(val &PANEL_POWER_ON ) || - ((val &PANEL_UNLOCK_REGS ) ==PANEL_UNLOCK_REGS )) + ((val &PANEL_UNLOCK_MASK ) ==PANEL_UNLOCK_REGS )) locked = false;if (I915_READ (lvds_reg) &LVDS_PIPEB_SELECT ) --1.9.1
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 1 line
Paulo Zanoni
Quoted 4 lines · Jani Nikula
Use the correct mask for the unlock bits. In theory this could have lead to incorrect asserts but this is unlikely in practise.
Signed-off-by Jani Nikula <[email protected]>
Quoted 24 lines
--- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/gpu/drm/i915/intel_display.c +1
-1@@ -1208,7 +1208,7 @@ static void assert_panel_unlocked(struct drm_i915_private *dev_priv, val =I915_READ (pp_reg);if (!(val &PANEL_POWER_ON ) || - ((val &PANEL_UNLOCK_REGS ) ==PANEL_UNLOCK_REGS )) + ((val &PANEL_UNLOCK_MASK ) ==PANEL_UNLOCK_REGS )) locked = false;if (I915_READ (lvds_reg) &LVDS_PIPEB_SELECT )Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 2 lines
Ville Syrjälä Intel OTC