Skip to contentSkip to conversation

Moving on from eglibc to glibc 2.20

RFT Khem Raj 3 participants 17 messages Aug 28, 2014 – Sep 2, 2014

lore
Share & tools
lore

Khem Raj

author
#0 lore raw

Hi All

As we all know eglibc has been merged back into glibc and 2.19 was the last release, here I have put together the recipes for upcoming glibc 2.20 release and removed eglibc 2.19 in favor of move.

I also thought about leaving eglibc in there but then eglibc and glibc were pretty much same as they always have been that it would be an incremental change with lot more patches this time.

The tree is here

http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/eglibc-to-glibc-2.20

This has not recieved much testing yet and I am looking out for helping hands here, so try it out in your buid environments and machines of interest and report back on issues.

The patches also forward port the options group support and few other patches from eglibc, details are in commit logs, which I think would make good candidates for future glibc merge.

This tree will be reworked and rebased so sync back if you see issues which we will address here

Thanks for your help

-Khem

#1 lore raw
Quoted 18 lines · Khem Raj

Hi All

As we all know eglibc has been merged back into glibc and 2.19 was the last release, here I have put together the recipes for upcoming glibc 2.20 release and removed eglibc 2.19 in favor of move.

I also thought about leaving eglibc in there but then eglibc and glibc were pretty much same as they always have been that it would be an incremental change with lot more patches this time.

The tree is here

http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/eglibc-to-glibc-2.20

This has not recieved much testing yet and I am looking out for helping hands here, so try it out in your buid environments and machines of interest and report back on issues.

Quoted 8 lines

The patches also forward port the options group support and few other patches from eglibc, details are in commit logs, which I think would make good candidates for future glibc merge.

This tree will be reworked and rebased so sync back if you see issues which we will address here

Thanks for your help

Thanks for doing this Khem, its quite some work and much appreciated!

Just to be clear, what is the intent here? Is it intended to get this into 1.7 or is this 1.8 material at this point? We're effectively past the toolchain freeze point for 1.7, just about at complete feature freeze but I'd like to make sure we're thinking the same things.

I'm certainly happy to get this through the autobuilder and see what happens...

Cheers,

Richard

author
#2 lore raw
Quoted 26 lines · Richard Purdie
Quoted 25 lines · Khem Raj

Hi All

As we all know eglibc has been merged back into glibc and 2.19 was the last release, here I have put together the recipes for upcoming glibc 2.20 release and removed eglibc 2.19 in favor of move.

I also thought about leaving eglibc in there but then eglibc and glibc were pretty much same as they always have been that it would be an incremental change with lot more patches this time.

The tree is here

http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/eglibc-to-glibc-2.20

This has not recieved much testing yet and I am looking out for helping hands here, so try it out in your buid environments and machines of interest and report back on issues.

The patches also forward port the options group support and few other patches from eglibc, details are in commit logs, which I think would make good candidates for future glibc merge.

This tree will be reworked and rebased so sync back if you see issues which we will address here

Quoted 8 lines
Quoted 1 line

Thanks for your help

Thanks for doing this Khem, its quite some work and much appreciated!

Just to be clear, what is the intent here? Is it intended to get this into 1.7 or is this 1.8 material at this point? We're effectively past the toolchain freeze point for 1.7, just about at complete feature freeze but I'd like to make sure we're thinking the same things.

I am targetting for 1.7 thats why call for wider testing to expedite. but it could only be decided with some level of testing. I havent done enough of testing yet myself it to be sure but in coming few days, it
will be lot clear

But if it turns into major issues then we can wait for 1.8 but it will be quite an effort to keep up with these patches over a long period of time.

Quoted 4 lines

I'm certainly happy to get this through the autobuilder and see what happens...

yes, ceertainly would help.

Quoted 4 lines

Cheers,

Richard

#3 lore raw
In reply to Khem Raj
Quoted 8 lines · Khem Raj

As we all know eglibc has been merged back into glibc and 2.19 was the last release, here I have put together the recipes for upcoming glibc 2.20 release and removed eglibc 2.19 in favor of move.

I also thought about leaving eglibc in there but then eglibc and glibc were pretty much same as they always have been that it would be an incremental change with lot more patches this time.

Quoted 7 lines

The tree is here

http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/eglibc-to-glibc-2.20

This has not recieved much testing yet and I am looking out for helping hands here, so try it out in your buid environments and machines of interest and report back on issues.

The one I've seen so far looks like a patch wasn't updated:

http://errors.yoctoproject.org/Errors/Search/Details/3783/3/10/1fc811ecd57be21ae6ab78e15204ffa76494c6b8

Cheers,

Richard

author
#4 lore raw
Quoted 13 lines · Richard Purdie
Quoted 12 lines · Khem Raj

As we all know eglibc has been merged back into glibc and 2.19 was the last release, here I have put together the recipes for upcoming glibc 2.20 release and removed eglibc 2.19 in favor of move.

I also thought about leaving eglibc in there but then eglibc and glibc were pretty much same as they always have been that it would be an incremental change with lot more patches this time.

The tree is here

http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/eglibc-to-glibc-2.20

Quoted 8 lines
Quoted 3 lines

This has not recieved much testing yet and I am looking out for helping hands here, so try it out in your buid environments and machines of interest and report back on issues.

The one I've seen so far looks like a patch wasn't updated:

http://errors.yoctoproject.org/Errors/Search/Details/3783/3/10/1fc811ecd57be21ae6ab78e15204ffa76494c6b8

Yes.
have forgotten the squash when I updated patches earlier today Fixed and pushed now.

Quoted 5 lines

Cheers,

Richard

#5 lore raw
In reply to Khem Raj
Quoted 10 lines · Khem Raj

Hi All

As we all know eglibc has been merged back into glibc and 2.19 was the last release, here I have put together the recipes for upcoming glibc 2.20 release and removed eglibc 2.19 in favor of move.

I also thought about leaving eglibc in there but then eglibc and glibc were pretty much same as they always have been that it would be an incremental change with lot more patches this time.

Quoted 7 lines

The tree is here

http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/eglibc-to-glibc-2.20

This has not recieved much testing yet and I am looking out for helping hands here, so try it out in your buid environments and machines of interest and report back on issues.

We're also seeing:

https://autobuilder.yoctoproject.org/main/builders/build-appliance/builds/15/steps/BuildImages_1/logs/stdio

which turns out to be triggered by the libc change (I confirmed on a local build). I haven't looked into why. There is also a similar issue from the synaptics driver.

Cheers,

Richard

author
#7 lore raw
Quoted 1 line · Khem Raj

reproduced. will apprise as I have some fix.

OK pushed another patch to the contrib tree that should take care of both xf86-input-synaptics xf86-input-vmmouse

#8 lore raw
Quoted 5 lines · Khem Raj
Quoted 1 line · Khem Raj

reproduced. will apprise as I have some fix.

OK pushed another patch to the contrib tree that should take care of both xf86-input-synaptics xf86-input-vmmouse

Thanks. I'm having one heck of a problem unentangling all the different build failures (from these and other patches) but this one looks like glibc:

https://autobuilder.yoctoproject.org/main/builders/poky-tiny/builds/18/steps/BuildImages/logs/stdio

Cheers,

Richard

author
#9 lore raw
Quoted 4 lines · Richard Purdie
Quoted 3 lines · Khem Raj
Quoted 1 line · Khem Raj

reproduced. will apprise as I have some fix.

Quoted 9 lines
Quoted 2 lines

OK pushed another patch to the contrib tree that should take care of both xf86-input-synaptics xf86-input-vmmouse

Thanks. I'm having one heck of a problem unentangling all the different build failures (from these and other patches) but this one looks like glibc:

https://autobuilder.yoctoproject.org/main/builders/poky-tiny/builds/18/steps/BuildImages/logs/stdio

Trying to reproduce it locally. Once I have, I will update.

Quoted 6 lines

Cheers,

Richard

author
#10 lore raw
Quoted 9 lines · Khem Raj
Quoted 7 lines · Richard Purdie
Quoted 5 lines · Khem Raj
Quoted 1 line · Khem Raj

reproduced. will apprise as I have some fix.

OK pushed another patch to the contrib tree that should take care of both xf86-input-synaptics xf86-input-vmmouse

Quoted 9 lines
Quoted 6 lines

Thanks. I'm having one heck of a problem unentangling all the different build failures (from these and other patches) but this one looks like glibc:

https://autobuilder.yoctoproject.org/main/builders/poky-tiny/builds/18/steps/BuildImages/logs/stdio

Trying to reproduce it locally. Once I have, I will update.

Richard

I have fixed this too and pushed the updates to same pull tree. Please give it another whirl

-Khem

author
#12 lore raw
Quoted 4 lines · Richard Purdie
Quoted 3 lines · Khem Raj
Quoted 1 line · Khem Raj

reproduced. will apprise as I have some fix.

Quoted 8 lines
Quoted 2 lines

OK pushed another patch to the contrib tree that should take care of both xf86-input-synaptics xf86-input-vmmouse

https://autobuilder.yoctoproject.org/main/builders/nightly-fsl-arm/builds/17/steps/BuildImages/logs/stdio

xf86-video-imxfb has the same issue and will need the same fix. Otavio cc'd...

I have sent a patch to meta-fsl-arm for this

Quoted 4 lines

Cheers,

Richard

author
#13 lore raw
Quoted 9 lines · Khem Raj
Quoted 7 lines · Richard Purdie
Quoted 5 lines · Khem Raj
Quoted 1 line · Khem Raj

reproduced. will apprise as I have some fix.

OK pushed another patch to the contrib tree that should take care of both xf86-input-synaptics xf86-input-vmmouse

Quoted 7 lines
Quoted 5 lines

https://autobuilder.yoctoproject.org/main/builders/nightly-fsl-arm/builds/17/steps/BuildImages/logs/stdio

xf86-video-imxfb has the same issue and will need the same fix. Otavio cc'd...

I have sent a patch to meta-fsl-arm for this

Until its installed, the patch is here
http://patchwork.openembedded.org/patch/79443/

#14 lore raw
Quoted 18 lines · Khem Raj
Quoted 9 lines · Khem Raj
Quoted 7 lines · Richard Purdie
Quoted 5 lines · Khem Raj
Quoted 1 line · Khem Raj

reproduced. will apprise as I have some fix.

OK pushed another patch to the contrib tree that should take care of both xf86-input-synaptics xf86-input-vmmouse

Quoted 7 lines
Quoted 5 lines

https://autobuilder.yoctoproject.org/main/builders/nightly-fsl-arm/builds/17/steps/BuildImages/logs/stdio

xf86-video-imxfb has the same issue and will need the same fix. Otavio cc'd...

I have sent a patch to meta-fsl-arm for this

Quoted 7 lines

Until its installed, the patch is here
http://patchwork.openembedded.org/patch/79443/
--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Is it possible to add an RREPLACES to these recipes so there's a clean upgrade path from eglibc?

author
#16 lore raw
Quoted 4 lines · Richard Purdie
Quoted 3 lines · Khem Raj
Quoted 1 line · Khem Raj

reproduced. will apprise as I have some fix.

Quoted 8 lines
Quoted 2 lines

OK pushed another patch to the contrib tree that should take care of both xf86-input-synaptics xf86-input-vmmouse

Also, meta-fsl-ppc fails:

https://autobuilder.yoctoproject.org/main/builders/nightly-fsl-ppc/builds/17/steps/BuildImages/logs/stdio

with a do_compile glibc failure.

I have fixed this. The patchset is updated on the contrib tree.

Quoted 6 lines

Cheers,

Richard