bcma: move code for core registration into separate function
Rafał Miłecki
maintainerPATCH 1/2 bcma: move code for core registration into separate function
This cleans code a bit and will us to register cores in other places as well. The only difference with this patch is using "core_index" for setting device name.
--- drivers/bcma/main.c | 67 ++++++++++++++++++++++++++++------------------------- 1 file changed, 36 insertions(+), 31 deletions(-)
drivers/bcma/main.c +36 -31
@@ -120,10 +120,42 @@ static void bcma_release_core_dev(struct device *dev)kfree (core); } -static int bcma_register_cores (struct bcma_bus *bus) +static void bcma_register_core (struct bcma_bus *bus,struct bcma_device *core) +{ +int err; + + core->dev.release = bcma_release_core_dev; + core->dev.bus = &bcma_bus_type; +dev_set_name (&core->dev,"bcma%d:%d" , bus->num, core->core_index); + +switch (bus->hosttype) { +case BCMA_HOSTTYPE_PCI : + core->dev.parent = &bus->host_pci->dev; + core->dma_dev = &bus->host_pci->dev; + core->irq = bus->host_pci->irq; +break ; +case BCMA_HOSTTYPE_SOC : + core->dev.dma_mask = &core->dev.coherent_dma_mask; + core->dma_dev = &core->dev; +break ; +case BCMA_HOSTTYPE_SDIO : +break ; + } + + err =device_register (&core->dev); +if (err) { +bcma_err (bus,"Could not register dev for core 0x%03X\n" , + core->id.id); +put_device (&core->dev); +return ; + } + core->dev_registered = true; +} + +static int bcma_register_devices (struct bcma_bus *bus) {struct bcma_device *core; -int err, dev_id =0 ; +int err;list_for_each_entry (core, &bus->cores, list) {/* We support that cores ourself */
@@ -143,34 +175,7 @@ static int bcma_register_cores(struct bcma_bus *bus) core->core_unit > 0)continue ; - core->dev.release = bcma_release_core_dev; - core->dev.bus = &bcma_bus_type; -dev_set_name (&core->dev,"bcma%d:%d" , bus->num, dev_id); - -switch (bus->hosttype) { -case BCMA_HOSTTYPE_PCI : - core->dev.parent = &bus->host_pci->dev; - core->dma_dev = &bus->host_pci->dev; - core->irq = bus->host_pci->irq; -break ; -case BCMA_HOSTTYPE_SOC : - core->dev.dma_mask = &core->dev.coherent_dma_mask; - core->dma_dev = &core->dev; -break ; -case BCMA_HOSTTYPE_SDIO : -break ; - } - - err =device_register (&core->dev); -if (err) { -bcma_err (bus, -"Could not register dev for core 0x%03X\n" , - core->id.id); -put_device (&core->dev); -continue ; - } - core->dev_registered = true; - dev_id++; +bcma_register_core (bus, core); }#ifdef CONFIG_BCMA_DRIVER_MIPS
@@ -297,7 +302,7 @@ int bcma_bus_register(struct bcma_bus *bus) }/* Register found cores */ -bcma_register_cores (bus); +bcma_register_devices (bus);bcma_info (bus,"Bus registered\n" );
Signature · 1 line
1.8.4.5
Rafał Miłecki
maintainerPATCH 2/2 bcma: register NAND and QSPI cores early
On Northstar (ARM arch) we will use MTD subsystem to access NVRAM and SPROM. To get access to flash device we need to register these cores first.
--- drivers/bcma/main.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
drivers/bcma/main.c +21 -0
@@ -120,6 +120,17 @@ static void bcma_release_core_dev(struct device *dev)kfree (core); } +static bool bcma_is_core_needed_early (u16 core_id) +{ +switch (core_id) { +case BCMA_CORE_NS_NAND : +case BCMA_CORE_NS_QSPI : +return true; + } + +return false; +} +static void bcma_register_core (struct bcma_bus *bus,struct bcma_device *core) {int err;
@@ -170,6 +181,10 @@ static int bcma_register_devices(struct bcma_bus *bus)continue ; } +/* Early cores were already registered */ +if (bcma_is_core_needed_early (core->id.id)) +continue ; +/* Only first GMAC core on BCM4706 is connected and working */ if (core->id.id ==BCMA_CORE_4706_MAC_GBIT && core->core_unit >0 )
@@ -252,6 +267,12 @@ int bcma_bus_register(struct bcma_bus *bus)bcma_core_chipcommon_early_init (&bus->drv_cc); } +/* Cores providing flash access go before SPROM init */ +list_for_each_entry (core, &bus->cores, list) { +if (bcma_is_core_needed_early (core->id.id)) +bcma_register_core (bus, core); + } +/* Try to get SPROM */ err =bcma_sprom_get (bus);if (err == -ENOENT ) {
Signature · 1 line
1.8.4.5
Re: [PATCH 2/2] bcma: register NAND and QSPI cores early
Quoted 5 lines · Rafał Miłecki
On Northstar (ARM arch) we will use MTD subsystem to access NVRAM and SPROM. To get access to flash device we need to register these cores first.
Signed-off-by Rafał Miłecki <[email protected]>
Quoted 4 lines
--- drivers/bcma/main.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
Quoted 5 lines · Rafał Miłecki
This cleans code a bit and will us to register cores in other places as well. The only difference with this patch is using "
core_index" for setting device name.Signed-off-by Rafał Miłecki <[email protected]>
Quoted 4 lines
--- drivers/bcma/main.c | 67 ++++++++++++++++++++++++++++------------------------- 1 file changed, 36 insertions(+), 31 deletions(-)