Skip to contentSkip to conversation

Prepare for enabling hierarchy irqdomain on x86

RFC Superseded Jiang Liu 2 participants 21 messages Sep 11, 2014

Subsystems (5)
x86 ACPI PCI IOMMU +1 more subsystems

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Jiang Liu

author
#0 lore raw

cover Prepare for enabling hierarchy irqdomain on x86

We plan to restructure x86 interrupt code based on hierarchy irqdomain, that is to build irqdomains for CPU vector, interrupt remapping unit, IOAPIC, MSI and HPET etc and orgonize those irqdomains in hierarchy mode.

This patchset is preparation work to enable hierarchy irqdomain on x86 platforms. It splits out code for vector management, MSI, HTIRQ from ioapic.c into separate files. It also introduces some helper functions to access irq_cfg, which will ease transition to hierarchy irqdomain later.

It's based on patchset at:
https://lkml.org/lkml/2014/9/11/97

And you may access it at:
https://github.com/jiangliu/linux.git irqdomain/p1v1

Jiang Liu (17):
x86, irq, ACPI: Fix building warning of unused code x86, irq: Kill fourth parameter of IO_APIC_get_PCI_irq_vector() x86, irq: Refine hw_irq.h to prepare for irqdomain support x86, irq: Rename local APIC related functions in io_apic.c as

    apic_xxx()

x86, irq: Protect __clear_irq_vector() with vector_lock x86, irq: Introduce helpers to access struct irq_cfg x86, irq: Move local APIC related code from io_apic.c into vector.c x86, irq: Replace printk(KERN_LVL) with pr_lvl() utilities x86, irq: Move PCI MSI related code from io_apic.c into msi.c x86, irq: Move HT IRQ related code from io_apic.c into htirq.c x86, irq: Move IOAPIC related declarations from hw_irq.h into
io_apic.h
x86, irq: Move IRQ initialization routines from io_apic.c into
vector.c
x86, irq: Make MSI and HT_IRQ indepenent of X86_IO_APIC x86, irq: Use helpers to access irq_cfg data structure associated
with IRQ
x86: irq_remapping: Use helpers to access irq_cfg data structure
associated with IRQ
iommu/vt-d: Use helpers to access irq_cfg data structure associated
with IRQ
iommu/amd: Use helpers to access irq_cfg data structure associated
with IRQ

Yinghai Lu (1):
x86, irq: Convert irq_2_pin list to generic list

 arch/x86/Kconfig                    |    6 +-
 arch/x86/include/asm/hw_irq.h       |   76 +--
 arch/x86/include/asm/io_apic.h      |   29 +-
 arch/x86/include/asm/pci.h          |    3 +
 arch/x86/kernel/acpi/boot.c         |    2 +
 arch/x86/kernel/apic/Makefile       |    4 +-
 arch/x86/kernel/apic/htirq.c        |  106 ++++
 arch/x86/kernel/apic/io_apic.c      | 1096 ++---------------------------------
 arch/x86/kernel/apic/msi.c          |  283 +++++++++
 arch/x86/kernel/apic/vector.c       |  716 +++++++++++++++++++++++
 arch/x86/kernel/irqinit.c           |   22 -
 arch/x86/pci/irq.c                  |    6 +-
 arch/x86/platform/uv/uv_irq.c       |    6 +-
 drivers/iommu/amd_iommu.c           |   14 +-
 drivers/iommu/intel_irq_remapping.c |   10 +-
 drivers/iommu/irq_remapping.c       |    6 +-
 drivers/pci/Kconfig                 |    2 +-
 drivers/pci/hotplug/ibmphp_core.c   |    5 +-
 18 files changed, 1226 insertions(+), 1166 deletions(-)
 create mode 100644 arch/x86/kernel/apic/htirq.c
 create mode 100644 arch/x86/kernel/apic/msi.c
 create mode 100644 arch/x86/kernel/apic/vector.c
Signature · 1 line
1.7.10.4
author
#1 lore raw

RFC 1/18 x86, irq, ACPI: Fix building warning of unused code

Fix building warning when CONFIG_X86_LOCAL_APIC is disabled. arch/x86/kernel/acpi/boot.c:699:20: warning: ‘acpi_set_irq_model_ioapic’ defined but not used [-Wunused-function]

---
 arch/x86/kernel/acpi/boot.c |    2 ++
 1 file changed, 2 insertions(+)
arch/x86/kernel/acpi/boot.c +2 -0
index 132f98a2288b..7f00bbf7956b 100644
@@ -706,6 +706,7 @@ void acpi_unregister_gsi(u32 gsi)
 }
 EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
 
+#ifdef CONFIG_X86_LOCAL_APIC
 static void __init acpi_set_irq_model_ioapic(void)
 {
 	acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC;
@@ -713,6 +714,7 @@ static void __init acpi_set_irq_model_ioapic(void)
 	__acpi_unregister_gsi = acpi_unregister_gsi_ioapic;
 	acpi_ioapic = 1;
 }
+#endif
 
 /*
  *  ACPI based hotplug support for CPU
Signature · 1 line
1.7.10.4
author
#2 lore raw

RFC 2/18 x86, irq: Kill fourth parameter of IO_APIC_get_PCI_irq_vector()

In reply to Jiang Liu

Now the fourth parameter of IO_APIC_get_PCI_irq_vector() is useless, so kill it. Assume it's only used by ibmphp PCI hotplug driver though IO_APIC_get_PCI_irq_vector() has been exported,

---
 arch/x86/include/asm/hw_irq.h     |    2 +-
 arch/x86/kernel/apic/io_apic.c    |   13 +++----------
 arch/x86/pci/irq.c                |    6 ++----
 drivers/pci/hotplug/ibmphp_core.c |    5 +----
 4 files changed, 7 insertions(+), 19 deletions(-)
arch/x86/include/asm/hw_irq.h +1 -1
index 4615906d83df..64330c2e172e 100644
@@ -158,7 +158,7 @@ extern void send_cleanup_vector(struct irq_cfg *);
 struct irq_data;
 int __ioapic_set_affinity(struct irq_data *, const struct cpumask *,
 			  unsigned int *dest_id);
-extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin, struct io_apic_irq_attr *irq_attr);
+extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin);
 extern void setup_ioapic_dest(void);
 
 extern void enable_IO_APIC(void);
arch/x86/kernel/apic/io_apic.c +3 -10
index f054c8803939..20e1be110ddb 100644
@@ -1179,8 +1179,7 @@ void mp_unmap_irq(int irq)
  * Find a specific PCI IRQ entry.
  * Not an __init, possibly needed by modules
  */
-int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin,
-				struct io_apic_irq_attr *irq_attr)
+int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
 {
 	int irq, i, best_ioapic = -1, best_idx = -1;
 
@@ -1234,14 +1233,8 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin,
 		return -1;
 
 out:
-	irq = pin_2_irq(best_idx, best_ioapic, mp_irqs[best_idx].dstirq,
-			IOAPIC_MAP_ALLOC);
-	if (irq > 0)
-		set_io_apic_irq_attr(irq_attr, best_ioapic,
-				     mp_irqs[best_idx].dstirq,
-				     irq_trigger(best_idx),
-				     irq_polarity(best_idx));
-	return irq;
+	return pin_2_irq(best_idx, best_ioapic, mp_irqs[best_idx].dstirq,
+			 IOAPIC_MAP_ALLOC);
 }
 EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
 
arch/x86/pci/irq.c +2 -4
index a47e2dea0972..7765b3facd4b 100644
@@ -1200,14 +1200,12 @@ static int pirq_enable_irq(struct pci_dev *dev)
 #ifdef CONFIG_X86_IO_APIC
 			struct pci_dev *temp_dev;
 			int irq;
-			struct io_apic_irq_attr irq_attr;
 
 			if (dev->irq_managed && dev->irq > 0)
 				return 0;
 
 			irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
-						PCI_SLOT(dev->devfn),
-						pin - 1, &irq_attr);
+						PCI_SLOT(dev->devfn), pin - 1);
 			/*
 			 * Busses behind bridges are typically not listed in the MP-table.
 			 * In this case we have to look up the IRQ based on the parent bus,
@@ -1221,7 +1219,7 @@ static int pirq_enable_irq(struct pci_dev *dev)
 				pin = pci_swizzle_interrupt_pin(dev, pin);
 				irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
 						PCI_SLOT(bridge->devfn),
-						pin - 1, &irq_attr);
+						pin - 1);
 				if (irq >= 0)
 					dev_warn(&dev->dev, "using bridge %s "
 						 "INT %c to get IRQ %d\n",
drivers/pci/hotplug/ibmphp_core.c +1 -4
index f7b8684a7739..adb85e1726d1 100644
@@ -155,13 +155,10 @@ int ibmphp_init_devno(struct slot **cur_slot)
 	for (loop = 0; loop < len; loop++) {
 		if ((*cur_slot)->number == rtable->slots[loop].slot &&
 		    (*cur_slot)->bus == rtable->slots[loop].bus) {
-			struct io_apic_irq_attr irq_attr;
-
 			(*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn);
 			for (i = 0; i < 4; i++)
 				(*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus,
-						(int) (*cur_slot)->device, i,
-						&irq_attr);
+						(int) (*cur_slot)->device, i);
 
 			debug("(*cur_slot)->irq[0] = %x\n",
 					(*cur_slot)->irq[0]);
Signature · 1 line
1.7.10.4
author
#3 lore raw

RFC 3/18 x86, irq: Convert irq_2_pin list to generic list

In reply to Jiang Liu

From: Yinghai Lu <[email protected]>

Use generic list to replace private list implementation so we could use generic helper functions to operate it.

Cc Konrad Rzeszutek Wilk <[email protected]>
Cc Sebastian Andrzej Siewior <[email protected]>
Cc Joerg Roedel <[email protected]>
---
 arch/x86/include/asm/hw_irq.h  |    2 +-
 arch/x86/kernel/apic/io_apic.c |   28 +++++++++++-----------------
 2 files changed, 12 insertions(+), 18 deletions(-)
arch/x86/include/asm/hw_irq.h +1 -1
index 64330c2e172e..28f283988c8e 100644
@@ -138,7 +138,7 @@ struct irq_2_irte {
  * Most irqs are mapped 1:1 with pins.
  */
 struct irq_cfg {
-	struct irq_pin_list	*irq_2_pin;
+	struct list_head	irq_2_pin;
 	cpumask_var_t		domain;
 	cpumask_var_t		old_domain;
 	u8			vector;
arch/x86/kernel/apic/io_apic.c +11 -17
index 20e1be110ddb..0a479242b244 100644
@@ -74,7 +74,7 @@
 		for_each_pin((idx), (pin))
 
 #define for_each_irq_pin(entry, head) \
-	for (entry = head; entry; entry = entry->next)
+	list_for_each_entry(entry, &head, list)
 
 /*
  *      Is the SiS APIC rmw bug present ?
@@ -229,8 +229,8 @@ void mp_save_irq(struct mpc_intsrc *m)
 }
 
 struct irq_pin_list {
+	struct list_head list;
 	int apic, pin;
-	struct irq_pin_list *next;
 };
 
 static struct irq_pin_list *alloc_irq_pin_list(int node)
@@ -297,6 +297,7 @@ static struct irq_cfg *alloc_irq_cfg(unsigned int irq, int node)
 		goto out_cfg;
 	if (!zalloc_cpumask_var_node(&cfg->old_domain, GFP_KERNEL, node))
 		goto out_domain;
+	INIT_LIST_HEAD(&cfg->irq_2_pin);
 	return cfg;
 out_domain:
 	free_cpumask_var(cfg->domain);
@@ -460,15 +461,12 @@ static void ioapic_mask_entry(int apic, int pin)
  */
 static int __add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
 {
-	struct irq_pin_list **last, *entry;
+	struct irq_pin_list *entry;
 
 	/* don't allow duplicates */
-	last = &cfg->irq_2_pin;
-	for_each_irq_pin(entry, cfg->irq_2_pin) {
+	for_each_irq_pin(entry, cfg->irq_2_pin)
 		if (entry->apic == apic && entry->pin == pin)
 			return 0;
-		last = &entry->next;
-	}
 
 	entry = alloc_irq_pin_list(node);
 	if (!entry) {
@@ -479,22 +477,19 @@ static int __add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pi
 	entry->apic = apic;
 	entry->pin = pin;
 
-	*last = entry;
+	list_add_tail(&entry->list, &cfg->irq_2_pin);
 	return 0;
 }
 
 static void __remove_pin_from_irq(struct irq_cfg *cfg, int apic, int pin)
 {
-	struct irq_pin_list **last, *entry;
+	struct irq_pin_list *tmp, *entry;
 
-	last = &cfg->irq_2_pin;
-	for_each_irq_pin(entry, cfg->irq_2_pin)
+	list_for_each_entry_safe(entry, tmp, &cfg->irq_2_pin, list)
 		if (entry->apic == apic && entry->pin == pin) {
-			*last = entry->next;
+			list_del(&entry->list);
 			kfree(entry);
 			return;
-		} else {
-			last = &entry->next;
 		}
 }
 
@@ -1739,8 +1734,7 @@ __apicdebuginit(void) print_IO_APICs(void)
 		cfg = irq_cfg(irq);
 		if (!cfg)
 			continue;
-		entry = cfg->irq_2_pin;
-		if (!entry)
+		if (list_empty(&cfg->irq_2_pin))
 			continue;
 		printk(KERN_DEBUG "IRQ%d ", irq);
 		for_each_irq_pin(entry, cfg->irq_2_pin)
@@ -4063,7 +4057,7 @@ void mp_irqdomain_unmap(struct irq_domain *domain, unsigned int virq)
 
 	ioapic_mask_entry(ioapic, pin);
 	__remove_pin_from_irq(cfg, ioapic, pin);
-	WARN_ON(cfg->irq_2_pin != NULL);
+	WARN_ON(!list_empty(&cfg->irq_2_pin));
 	arch_teardown_hwirq(virq);
 }
 
Signature · 1 line
1.7.10.4
author
#4 lore raw

RFC 4/18 x86, irq: Refine hw_irq.h to prepare for irqdomain support

In reply to Jiang Liu

Refine hw_irq.h to prepare for irqdomain support by:
1) guarding common APIC related interfaces with CONFIG_X86_LOCAL_APIC
2) guarding interrupt remapping related interfaces with CONFIG_IRQ_REMAP
3) guarding IOAPIC related interfaces with CONFIG_X86_IO_APIC

There should be no functional changes.

---
 arch/x86/include/asm/hw_irq.h |   94 ++++++++++++++++++++++-------------------
 1 file changed, 51 insertions(+), 43 deletions(-)
arch/x86/include/asm/hw_irq.h +51 -43
index 28f283988c8e..8188d648d48c 100644
@@ -94,30 +94,7 @@ extern void trace_call_function_single_interrupt(void);
 #define trace_kvm_posted_intr_ipi kvm_posted_intr_ipi
 #endif /* CONFIG_TRACING */
 
-/* IOAPIC */
-#define IO_APIC_IRQ(x) (((x) >= NR_IRQS_LEGACY) || ((1<<(x)) & io_apic_irqs))
-extern unsigned long io_apic_irqs;
-
-extern void setup_IO_APIC(void);
-extern void disable_IO_APIC(void);
-
-struct io_apic_irq_attr {
-	int ioapic;
-	int ioapic_pin;
-	int trigger;
-	int polarity;
-};
-
-static inline void set_io_apic_irq_attr(struct io_apic_irq_attr *irq_attr,
-					int ioapic, int ioapic_pin,
-					int trigger, int polarity)
-{
-	irq_attr->ioapic	= ioapic;
-	irq_attr->ioapic_pin	= ioapic_pin;
-	irq_attr->trigger	= trigger;
-	irq_attr->polarity	= polarity;
-}
-
+#ifdef CONFIG_IRQ_REMAP
 /* Intel specific interrupt remapping information */
 struct irq_2_iommu {
 	struct intel_iommu *iommu;
@@ -131,14 +108,10 @@ struct irq_2_irte {
 	u16 devid; /* Device ID for IRTE table */
 	u16 index; /* Index into IRTE table*/
 };
+#endif	/* CONFIG_IRQ_REMAP */
 
-/*
- * This is performance-critical, we want to do it O(1)
- *
- * Most irqs are mapped 1:1 with pins.
- */
+#ifdef	CONFIG_X86_LOCAL_APIC
 struct irq_cfg {
-	struct list_head	irq_2_pin;
 	cpumask_var_t		domain;
 	cpumask_var_t		old_domain;
 	u8			vector;
@@ -150,18 +123,64 @@ struct irq_cfg {
 		struct irq_2_irte  irq_2_irte;
 	};
 #endif
+	union {
+#ifdef CONFIG_X86_IO_APIC
+		struct {
+			struct list_head	irq_2_pin;
+		};
+#endif
+	};
 };
 
+extern void setup_vector_irq(int cpu);
 extern int assign_irq_vector(int, struct irq_cfg *, const struct cpumask *);
 extern void send_cleanup_vector(struct irq_cfg *);
 
 struct irq_data;
 int __ioapic_set_affinity(struct irq_data *, const struct cpumask *,
 			  unsigned int *dest_id);
-extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin);
-extern void setup_ioapic_dest(void);
+#endif	/* CONFIG_X86_LOCAL_APIC */
+
+#ifdef CONFIG_X86_IO_APIC
+extern void lock_vector_lock(void);
+extern void unlock_vector_lock(void);
+extern void __setup_vector_irq(int cpu);
+#else
+static inline void lock_vector_lock(void) {}
+static inline void unlock_vector_lock(void) {}
+static inline void __setup_vector_irq(int cpu) {}
+#endif
+
+/* IOAPIC */
+#ifdef CONFIG_X86_IO_APIC
+struct io_apic_irq_attr {
+	int ioapic;
+	int ioapic_pin;
+	int trigger;
+	int polarity;
+};
+
+static inline void set_io_apic_irq_attr(struct io_apic_irq_attr *irq_attr,
+					int ioapic, int ioapic_pin,
+					int trigger, int polarity)
+{
+	irq_attr->ioapic	= ioapic;
+	irq_attr->ioapic_pin	= ioapic_pin;
+	irq_attr->trigger	= trigger;
+	irq_attr->polarity	= polarity;
+}
 
+extern void setup_IO_APIC(void);
 extern void enable_IO_APIC(void);
+extern void disable_IO_APIC(void);
+extern void setup_ioapic_dest(void);
+extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin);
+
+extern unsigned long io_apic_irqs;
+#define IO_APIC_IRQ(x) (((x) >= NR_IRQS_LEGACY) || ((1 << (x)) & io_apic_irqs))
+#else	/* CONFIG_X86_IO_APIC */
+#define IO_APIC_IRQ(x)	0
+#endif	/* CONFIG_X86_IO_APIC */
 
 /* Statistics */
 extern atomic_t irq_err_count;
@@ -195,17 +214,6 @@ extern void (*__initconst interrupt[NR_VECTORS-FIRST_EXTERNAL_VECTOR])(void);
 
 typedef int vector_irq_t[NR_VECTORS];
 DECLARE_PER_CPU(vector_irq_t, vector_irq);
-extern void setup_vector_irq(int cpu);
-
-#ifdef CONFIG_X86_IO_APIC
-extern void lock_vector_lock(void);
-extern void unlock_vector_lock(void);
-extern void __setup_vector_irq(int cpu);
-#else
-static inline void lock_vector_lock(void) {}
-static inline void unlock_vector_lock(void) {}
-static inline void __setup_vector_irq(int cpu) {}
-#endif
 
 #endif /* !ASSEMBLY_ */
 
Signature · 1 line
1.7.10.4
author
#5 lore raw

RFC 5/18 x86, irq: Rename local APIC related functions in io_apic.c as apic_xxx()

In reply to Jiang Liu

Rename local APIC related functions in io_apic.c as apic_xxx() instead of ioapic_xxx(), later they will be moved into separate file.

---
 arch/x86/include/asm/hw_irq.h  |    4 ++--
 arch/x86/kernel/apic/io_apic.c |   42 ++++++++++++++++++++--------------------
 arch/x86/platform/uv/uv_irq.c  |    2 +-
 3 files changed, 24 insertions(+), 24 deletions(-)
arch/x86/include/asm/hw_irq.h +2 -2
index 8188d648d48c..18e8717bf644 100644
@@ -137,8 +137,8 @@ extern int assign_irq_vector(int, struct irq_cfg *, const struct cpumask *);
 extern void send_cleanup_vector(struct irq_cfg *);
 
 struct irq_data;
-int __ioapic_set_affinity(struct irq_data *, const struct cpumask *,
-			  unsigned int *dest_id);
+int apic_set_affinity(struct irq_data *, const struct cpumask *,
+		      unsigned int *dest_id);
 #endif	/* CONFIG_X86_LOCAL_APIC */
 
 #ifdef CONFIG_X86_IO_APIC
arch/x86/kernel/apic/io_apic.c +21 -21

131 lines not on this page · raw message

arch/x86/platform/uv/uv_irq.c +1 -1
index b233681af4de..3e8fab740c1d 100644
@@ -204,7 +204,7 @@ uv_set_irq_affinity(struct irq_data *data, const struct cpumask *mask,
 	struct uv_IO_APIC_route_entry *entry;
 	int mmr_pnode;
 
-	if (__ioapic_set_affinity(data, mask, &dest))
+	if (apic_set_affinity(data, mask, &dest))
 		return -1;
 
 	mmr_value = 0;
Signature · 1 line
1.7.10.4
author
#6 lore raw

RFC 6/18 x86, irq: Protect __clear_irq_vector() with vector_lock

In reply to Jiang Liu

Function __clear_irq_vector() accesses vector related data structure, so protect it with vector_lock. Also rename it as clear_irq_vector().

---
 arch/x86/kernel/apic/io_apic.c |   19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)
arch/x86/kernel/apic/io_apic.c +11 -8
index 814527753563..ee3d3ff521a3 100644
@@ -1349,10 +1349,12 @@ int assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
 	return err;
 }
 
-static void __clear_irq_vector(int irq, struct irq_cfg *cfg)
+static void clear_irq_vector(int irq, struct irq_cfg *cfg)
 {
 	int cpu, vector;
+	unsigned long flags;
 
+	raw_spin_lock_irqsave(&vector_lock, flags);
 	BUG_ON(!cfg->vector);
 
 	vector = cfg->vector;
@@ -1362,8 +1364,11 @@ static void __clear_irq_vector(int irq, struct irq_cfg *cfg)
 	cfg->vector = 0;
 	cpumask_clear(cfg->domain);
 
-	if (likely(!cfg->move_in_progress))
+	if (likely(!cfg->move_in_progress)) {
+		raw_spin_unlock_irqrestore(&vector_lock, flags);
 		return;
+	}
+
 	for_each_cpu_and(cpu, cfg->old_domain, cpu_online_mask) {
 		for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
 			if (per_cpu(vector_irq, cpu)[vector] != irq)
@@ -1373,6 +1378,7 @@ static void __clear_irq_vector(int irq, struct irq_cfg *cfg)
 		}
 	}
 	cfg->move_in_progress = 0;
+	raw_spin_unlock_irqrestore(&vector_lock, flags);
 }
 
 void __setup_vector_irq(int cpu)
@@ -1499,7 +1505,7 @@ static void setup_ioapic_irq(unsigned int irq, struct irq_cfg *cfg,
 					 &dest)) {
 		pr_warn("Failed to obtain apicid for ioapic %d, pin %d\n",
 			mpc_ioapic_id(attr->ioapic), attr->ioapic_pin);
-		__clear_irq_vector(irq, cfg);
+		clear_irq_vector(irq, cfg);
 
 		return;
 	}
@@ -1513,7 +1519,7 @@ static void setup_ioapic_irq(unsigned int irq, struct irq_cfg *cfg,
 	if (x86_io_apic_ops.setup_entry(irq, &entry, dest, cfg->vector, attr)) {
 		pr_warn("Failed to setup ioapic entry for ioapic  %d, pin %d\n",
 			mpc_ioapic_id(attr->ioapic), attr->ioapic_pin);
-		__clear_irq_vector(irq, cfg);
+		clear_irq_vector(irq, cfg);
 
 		return;
 	}
@@ -3082,12 +3088,9 @@ int arch_setup_hwirq(unsigned int irq, int node)
 void arch_teardown_hwirq(unsigned int irq)
 {
 	struct irq_cfg *cfg = irq_cfg(irq);
-	unsigned long flags;
 
 	free_remapped_irq(irq);
-	raw_spin_lock_irqsave(&vector_lock, flags);
-	__clear_irq_vector(irq, cfg);
-	raw_spin_unlock_irqrestore(&vector_lock, flags);
+	clear_irq_vector(irq, cfg);
 	free_irq_cfg(irq, cfg);
 }
 
Signature · 1 line
1.7.10.4
author
#7 lore raw

RFC 7/18 x86, irq: Introduce helpers to access struct irq_cfg

In reply to Jiang Liu

Change irq_cfg() from static to extern, also introduce helper function irqd_cfg(). Later we could rewrite these two helpers when enabling hierarchy irqdomain.

---
 arch/x86/include/asm/hw_irq.h  |    2 ++
 arch/x86/kernel/apic/io_apic.c |    7 ++++++-
 2 files changed, 8 insertions(+), 1 deletion(-)
arch/x86/include/asm/hw_irq.h +2 -0
index 18e8717bf644..f457fcd0f3ba 100644
@@ -132,6 +132,8 @@ struct irq_cfg {
 	};
 };
 
+extern struct irq_cfg *irq_cfg(unsigned int irq);
+extern struct irq_cfg *irqd_cfg(struct irq_data *irq_data);
 extern void setup_vector_irq(int cpu);
 extern int assign_irq_vector(int, struct irq_cfg *, const struct cpumask *);
 extern void send_cleanup_vector(struct irq_cfg *);
arch/x86/kernel/apic/io_apic.c +6 -1
index ee3d3ff521a3..9b048c239dd4 100644
@@ -281,11 +281,16 @@ int __init arch_early_irq_init(void)
 	return 0;
 }
 
-static inline struct irq_cfg *irq_cfg(unsigned int irq)
+struct irq_cfg *irq_cfg(unsigned int irq)
 {
 	return irq_get_chip_data(irq);
 }
 
+struct irq_cfg *irqd_cfg(struct irq_data *irq_data)
+{
+	return irq_data->chip_data;
+}
+
 static struct irq_cfg *alloc_irq_cfg(unsigned int irq, int node)
 {
 	struct irq_cfg *cfg;
Signature · 1 line
1.7.10.4
#8 lore raw

Re: [RFC Part1 v1 07/18] x86, irq: Introduce helpers to access struct irq_cfg

Quoted 31 lines · Jiang Liu

Change irq_cfg() from static to extern, also introduce helper function irqd_cfg(). Later we could rewrite these two helpers when enabling hierarchy irqdomain.

---
 arch/x86/include/asm/hw_irq.h  |    2 ++
 arch/x86/kernel/apic/io_apic.c |    7 ++++++-
 2 files changed, 8 insertions(+), 1 deletion(-)
arch/x86/include/asm/hw_irq.h +2 -0
index 18e8717bf644..f457fcd0f3ba 100644
@@ -132,6 +132,8 @@ struct irq_cfg {
 	};
 };
 
+extern struct irq_cfg *irq_cfg(unsigned int irq);
+extern struct irq_cfg *irqd_cfg(struct irq_data *irq_data);
 extern void setup_vector_irq(int cpu);
 extern int assign_irq_vector(int, struct irq_cfg *, const struct cpumask *);
 extern void send_cleanup_vector(struct irq_cfg *);
arch/x86/kernel/apic/io_apic.c +0 -0
index ee3d3ff521a3..9b048c239dd4 100644
@@ -281,11 +281,16 @@ int __init arch_early_irq_init(void)
 	return 0;
 }
 

arch/x86/kernel/apic/io_apic.c int __init arch_early_irq_init(void) · line 292

Quoted 10 lines
arch/x86/kernel/apic/io_apic.c +5 -1
-static inline struct irq_cfg *irq_cfg(unsigned int irq)
+struct irq_cfg *irq_cfg(unsigned int irq)
 {
 	return irq_get_chip_data(irq);
 }
 
+struct irq_cfg *irqd_cfg(struct irq_data *irq_data)
+{
+	return irq_data->chip_data;
+}

We can make those inlines. There is no point to have that as global functions.

Thanks,

tglx

#9 lore raw

Re: [RFC Part1 v1 07/18] x86, irq: Introduce helpers to access struct irq_cfg

Quoted 7 lines · Thomas Gleixner
Quoted 6 lines · Jiang Liu
arch/x86/kernel/apic/io_apic.c +1 -1
-static inline struct irq_cfg *irq_cfg(unsigned int irq)
+struct irq_cfg *irq_cfg(unsigned int irq)
 {
 	return irq_get_chip_data(irq);
 }
Quoted 7 lines

arch/x86/kernel/apic/io_apic.c int __init arch_early_irq_init(void) · line 292

Quoted 4 lines
arch/x86/kernel/apic/io_apic.c +4 -0
+struct irq_cfg *irqd_cfg(struct irq_data *irq_data)
+{
+	return irq_data->chip_data;
+}

We can make those inlines. There is no point to have that as global functions.

Never mind. Just reading the other patch set.....

author
#10 lore raw

RFC 8/18 x86, irq: Move local APIC related code from io_apic.c into vector.c

In reply to Jiang Liu

Create arch/x86/kernel/apic/vector.c to host local APIC related code, prepare for making MSI/HT_IRQ independent of IOAPIC.

---
 arch/x86/Kconfig               |    2 +-
 arch/x86/include/asm/hw_irq.h  |   29 +-
 arch/x86/kernel/apic/Makefile  |    2 +-
 arch/x86/kernel/apic/io_apic.c |  649 +------------------------------------
 arch/x86/kernel/apic/vector.c  |  689 ++++++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/irqinit.c      |   22 --
 6 files changed, 709 insertions(+), 684 deletions(-)
 create mode 100644 arch/x86/kernel/apic/vector.c
arch/x86/Kconfig +1 -1
index 778178f4c7d1..e0fc1e721ae2 100644
@@ -836,11 +836,11 @@ config X86_UP_IOAPIC
 config X86_LOCAL_APIC
 	def_bool y
 	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC || PCI_MSI
+	select GENERIC_IRQ_LEGACY_ALLOC_HWIRQ
 
 config X86_IO_APIC
 	def_bool y
 	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC || PCI_MSI
-	select GENERIC_IRQ_LEGACY_ALLOC_HWIRQ
 	select IRQ_DOMAIN
 
 config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
arch/x86/include/asm/hw_irq.h +16 -13
index f457fcd0f3ba..dca760e9cd12 100644
@@ -111,6 +111,8 @@ struct irq_2_irte {
 #endif	/* CONFIG_IRQ_REMAP */
 
 #ifdef	CONFIG_X86_LOCAL_APIC
+struct irq_data;
+
 struct irq_cfg {
 	cpumask_var_t		domain;
 	cpumask_var_t		old_domain;
@@ -134,24 +136,23 @@ struct irq_cfg {
 
 extern struct irq_cfg *irq_cfg(unsigned int irq);
 extern struct irq_cfg *irqd_cfg(struct irq_data *irq_data);
-extern void setup_vector_irq(int cpu);
+extern struct irq_cfg *alloc_irq_and_cfg_at(unsigned int at, int node);
+extern void lock_vector_lock(void);
+extern void unlock_vector_lock(void);
 extern int assign_irq_vector(int, struct irq_cfg *, const struct cpumask *);
+extern void clear_irq_vector(int irq, struct irq_cfg *cfg);
+extern void setup_vector_irq(int cpu);
 extern void send_cleanup_vector(struct irq_cfg *);
+extern void irq_complete_move(struct irq_cfg *cfg);
 
-struct irq_data;
-int apic_set_affinity(struct irq_data *, const struct cpumask *,
-		      unsigned int *dest_id);
-#endif	/* CONFIG_X86_LOCAL_APIC */
-
-#ifdef CONFIG_X86_IO_APIC
-extern void lock_vector_lock(void);
-extern void unlock_vector_lock(void);
-extern void __setup_vector_irq(int cpu);
-#else
+extern int apic_retrigger_irq(struct irq_data *data);
+extern void apic_ack_edge(struct irq_data *data);
+extern int apic_set_affinity(struct irq_data *data, const struct cpumask *mask,
+			     unsigned int *dest_id);
+#else	/*  CONFIG_X86_LOCAL_APIC */
 static inline void lock_vector_lock(void) {}
 static inline void unlock_vector_lock(void) {}
-static inline void __setup_vector_irq(int cpu) {}
-#endif
+#endif	/* CONFIG_X86_LOCAL_APIC */
 
 /* IOAPIC */
 #ifdef CONFIG_X86_IO_APIC
@@ -177,11 +178,13 @@ extern void enable_IO_APIC(void);
 extern void disable_IO_APIC(void);
 extern void setup_ioapic_dest(void);
 extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin);
+extern void print_IO_APICs(void);
 
 extern unsigned long io_apic_irqs;
 #define IO_APIC_IRQ(x) (((x) >= NR_IRQS_LEGACY) || ((1 << (x)) & io_apic_irqs))
 #else	/* CONFIG_X86_IO_APIC */
 #define IO_APIC_IRQ(x)	0
+static inline void print_IO_APICs(void) {}
 #endif	/* CONFIG_X86_IO_APIC */
 
 /* Statistics */
arch/x86/kernel/apic/Makefile +1 -1
index dcb5b15401ce..84299e5d10dc 100644
@@ -2,7 +2,7 @@
 # Makefile for local APIC drivers and for the IO-APIC code
 #
 
-obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o apic_noop.o ipi.o
+obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o apic_noop.o ipi.o vector.o
 obj-y				+= hw_nmi.o
 
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
arch/x86/kernel/apic/io_apic.c +2 -647

727 lines not on this page · raw message

arch/x86/kernel/apic/vector.c new file +689 -0

689 lines not on this page · raw message

arch/x86/kernel/irqinit.c +0 -22
index 44f1ed42fdf2..7228ac74aba6 100644
@@ -100,28 +100,6 @@ void __init init_IRQ(void)
 	x86_init.irqs.intr_init();
 }
 
-/*
- * Setup the vector to irq mappings.
- */
-void setup_vector_irq(int cpu)
-{
-#ifndef CONFIG_X86_IO_APIC
-	int irq;
-
-	/*
-	 * On most of the platforms, legacy PIC delivers the interrupts on the
-	 * boot cpu. But there are certain platforms where PIC interrupts are
-	 * delivered to multiple cpu's. If the legacy IRQ is handled by the
-	 * legacy PIC, for the new cpu that is coming online, setup the static
-	 * legacy vector to irq mapping:
-	 */
-	for (irq = 0; irq < nr_legacy_irqs(); irq++)
-		per_cpu(vector_irq, cpu)[IRQ0_VECTOR + irq] = irq;
-#endif
-
-	__setup_vector_irq(cpu);
-}
-
 static void __init smp_intr_init(void)
 {
 #ifdef CONFIG_SMP
Signature · 1 line
1.7.10.4
author
#11 lore raw

RFC 9/18 x86, irq: Replace printk(KERN_LVL) with pr_lvl() utilities

In reply to Jiang Liu

Replace printk(KENR_LVL) with pr_lvl() to keep checkpatch script silent.

---
 arch/x86/kernel/apic/vector.c |   69 ++++++++++++++++++++---------------------
 1 file changed, 34 insertions(+), 35 deletions(-)
arch/x86/kernel/apic/vector.c +34 -35
index 248ad962c09a..f728cbfc29a9 100644
@@ -506,27 +506,26 @@ static void __init print_local_APIC(void *dummy)
 	unsigned int i, v, ver, maxlvt;
 	u64 icr;
 
-	printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
-		smp_processor_id(), hard_smp_processor_id());
+	pr_debug("printing local APIC contents on CPU#%d/%d:\n",
+		 smp_processor_id(), hard_smp_processor_id());
 	v = apic_read(APIC_ID);
-	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, read_apic_id());
+	pr_info("... APIC ID:      %08x (%01x)\n", v, read_apic_id());
 	v = apic_read(APIC_LVR);
-	printk(KERN_INFO "... APIC VERSION: %08x\n", v);
+	pr_info("... APIC VERSION: %08x\n", v);
 	ver = GET_APIC_VERSION(v);
 	maxlvt = lapic_get_maxlvt();
 
 	v = apic_read(APIC_TASKPRI);
-	printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n",
-	       v, v & APIC_TPRI_MASK);
+	pr_debug("... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
 
 	if (APIC_INTEGRATED(ver)) {                     /* !82489DX */
 		if (!APIC_XAPIC(ver)) {
 			v = apic_read(APIC_ARBPRI);
-			printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
-			       v & APIC_ARBPRI_MASK);
+			pr_debug("... APIC ARBPRI: %08x (%02x)\n",
+				 v, v & APIC_ARBPRI_MASK);
 		}
 		v = apic_read(APIC_PROCPRI);
-		printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
+		pr_debug("... APIC PROCPRI: %08x\n", v);
 	}
 
 	/*
@@ -535,23 +534,23 @@ static void __init print_local_APIC(void *dummy)
 	 */
 	if (!APIC_INTEGRATED(ver) || maxlvt == 3) {
 		v = apic_read(APIC_RRR);
-		printk(KERN_DEBUG "... APIC RRR: %08x\n", v);
+		pr_debug("... APIC RRR: %08x\n", v);
 	}
 
 	v = apic_read(APIC_LDR);
-	printk(KERN_DEBUG "... APIC LDR: %08x\n", v);
+	pr_debug("... APIC LDR: %08x\n", v);
 	if (!x2apic_enabled()) {
 		v = apic_read(APIC_DFR);
-		printk(KERN_DEBUG "... APIC DFR: %08x\n", v);
+		pr_debug("... APIC DFR: %08x\n", v);
 	}
 	v = apic_read(APIC_SPIV);
-	printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
+	pr_debug("... APIC SPIV: %08x\n", v);
 
-	printk(KERN_DEBUG "... APIC ISR field:\n");
+	pr_debug("... APIC ISR field:\n");
 	print_APIC_field(APIC_ISR);
-	printk(KERN_DEBUG "... APIC TMR field:\n");
+	pr_debug("... APIC TMR field:\n");
 	print_APIC_field(APIC_TMR);
-	printk(KERN_DEBUG "... APIC IRR field:\n");
+	pr_debug("... APIC IRR field:\n");
 	print_APIC_field(APIC_IRR);
 
 	if (APIC_INTEGRATED(ver)) {             /* !82489DX */
@@ -559,46 +558,46 @@ static void __init print_local_APIC(void *dummy)
 			apic_write(APIC_ESR, 0);
 
 		v = apic_read(APIC_ESR);
-		printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
+		pr_debug("... APIC ESR: %08x\n", v);
 	}
 
 	icr = apic_icr_read();
-	printk(KERN_DEBUG "... APIC ICR: %08x\n", (u32)icr);
-	printk(KERN_DEBUG "... APIC ICR2: %08x\n", (u32)(icr >> 32));
+	pr_debug("... APIC ICR: %08x\n", (u32)icr);
+	pr_debug("... APIC ICR2: %08x\n", (u32)(icr >> 32));
 
 	v = apic_read(APIC_LVTT);
-	printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
+	pr_debug("... APIC LVTT: %08x\n", v);
 
 	if (maxlvt > 3) {                       /* PC is LVT#4. */
 		v = apic_read(APIC_LVTPC);
-		printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v);
+		pr_debug("... APIC LVTPC: %08x\n", v);
 	}
 	v = apic_read(APIC_LVT0);
-	printk(KERN_DEBUG "... APIC LVT0: %08x\n", v);
+	pr_debug("... APIC LVT0: %08x\n", v);
 	v = apic_read(APIC_LVT1);
-	printk(KERN_DEBUG "... APIC LVT1: %08x\n", v);
+	pr_debug("... APIC LVT1: %08x\n", v);
 
 	if (maxlvt > 2) {			/* ERR is LVT#3. */
 		v = apic_read(APIC_LVTERR);
-		printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v);
+		pr_debug("... APIC LVTERR: %08x\n", v);
 	}
 
 	v = apic_read(APIC_TMICT);
-	printk(KERN_DEBUG "... APIC TMICT: %08x\n", v);
+	pr_debug("... APIC TMICT: %08x\n", v);
 	v = apic_read(APIC_TMCCT);
-	printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
+	pr_debug("... APIC TMCCT: %08x\n", v);
 	v = apic_read(APIC_TDCR);
-	printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
+	pr_debug("... APIC TDCR: %08x\n", v);
 
 	if (boot_cpu_has(X86_FEATURE_EXTAPIC)) {
 		v = apic_read(APIC_EFEAT);
 		maxlvt = (v >> 16) & 0xff;
-		printk(KERN_DEBUG "... APIC EFEAT: %08x\n", v);
+		pr_debug("... APIC EFEAT: %08x\n", v);
 		v = apic_read(APIC_ECTRL);
-		printk(KERN_DEBUG "... APIC ECTRL: %08x\n", v);
+		pr_debug("... APIC ECTRL: %08x\n", v);
 		for (i = 0; i < maxlvt; i++) {
 			v = apic_read(APIC_EILVTn(i));
-			printk(KERN_DEBUG "... APIC EILVT%d: %08x\n", i, v);
+			pr_debug("... APIC EILVT%d: %08x\n", i, v);
 		}
 	}
 	pr_cont("\n");
@@ -628,15 +627,15 @@ static void __init print_PIC(void)
 	if (!nr_legacy_irqs())
 		return;
 
-	printk(KERN_DEBUG "\nprinting PIC contents\n");
+	pr_debug("\nprinting PIC contents\n");
 
 	raw_spin_lock_irqsave(&i8259A_lock, flags);
 
 	v = inb(0xa1) << 8 | inb(0x21);
-	printk(KERN_DEBUG "... PIC  IMR: %04x\n", v);
+	pr_debug("... PIC  IMR: %04x\n", v);
 
 	v = inb(0xa0) << 8 | inb(0x20);
-	printk(KERN_DEBUG "... PIC  IRR: %04x\n", v);
+	pr_debug("... PIC  IRR: %04x\n", v);
 
 	outb(0x0b, 0xa0);
 	outb(0x0b, 0x20);
@@ -646,10 +645,10 @@ static void __init print_PIC(void)
 
 	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
 
-	printk(KERN_DEBUG "... PIC  ISR: %04x\n", v);
+	pr_debug("... PIC  ISR: %04x\n", v);
 
 	v = inb(0x4d1) << 8 | inb(0x4d0);
-	printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
+	pr_debug("... PIC ELCR: %04x\n", v);
 }
 
 static int show_lapic __initdata = 1;
Signature · 1 line
1.7.10.4
author
#12 lore raw

RFC 10/18 x86, irq: Move PCI MSI related code from io_apic.c into msi.c

In reply to Jiang Liu

Create arch/x86/kernel/apic/msi.c to host MSI related code, preparing for enabling hierarchy irqdomain.

---
 arch/x86/include/asm/io_apic.h |    4 -
 arch/x86/include/asm/pci.h     |    3 +
 arch/x86/kernel/apic/Makefile  |    1 +
 arch/x86/kernel/apic/io_apic.c |  269 --------------------------------------
 arch/x86/kernel/apic/msi.c     |  283 ++++++++++++++++++++++++++++++++++++++++
 5 files changed, 287 insertions(+), 273 deletions(-)
 create mode 100644 arch/x86/kernel/apic/msi.c
arch/x86/include/asm/io_apic.h +0 -4
index ca742d5249db..a2245cb5ca3f 100644
@@ -148,9 +148,6 @@ extern int native_setup_ioapic_entry(int, struct IO_APIC_route_entry *,
 				     struct io_apic_irq_attr *);
 extern void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg);
 
-extern void native_compose_msi_msg(struct pci_dev *pdev,
-				   unsigned int irq, unsigned int dest,
-				   struct msi_msg *msg, u8 hpet_id);
 extern void native_eoi_ioapic_pin(int apic, int pin, int vector);
 
 extern int save_ioapic_entries(void);
@@ -264,7 +261,6 @@ static inline void disable_ioapic_support(void) { }
 #define native_io_apic_print_entries	NULL
 #define native_ioapic_set_affinity	NULL
 #define native_setup_ioapic_entry	NULL
-#define native_compose_msi_msg		NULL
 #define native_eoi_ioapic_pin		NULL
 #endif
 
arch/x86/include/asm/pci.h +3 -0
index 0892ea0e683f..4e370a5d8117 100644
@@ -96,12 +96,15 @@ extern void pci_iommu_alloc(void);
 #ifdef CONFIG_PCI_MSI
 /* implemented in arch/x86/kernel/apic/io_apic. */
 struct msi_desc;
+void native_compose_msi_msg(struct pci_dev *pdev, unsigned int irq,
+			    unsigned int dest, struct msi_msg *msg, u8 hpet_id);
 int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
 void native_teardown_msi_irq(unsigned int irq);
 void native_restore_msi_irqs(struct pci_dev *dev);
 int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 		  unsigned int irq_base, unsigned int irq_offset);
 #else
+#define native_compose_msi_msg		NULL
 #define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
 #endif
arch/x86/kernel/apic/Makefile +1 -0
index 84299e5d10dc..aac300750f0e 100644
@@ -6,6 +6,7 @@ obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o apic_noop.o ipi.o vector.o
 obj-y				+= hw_nmi.o
 
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
+obj-$(CONFIG_PCI_MSI)		+= msi.o
 obj-$(CONFIG_SMP)		+= ipi.o
 
 ifeq ($(CONFIG_X86_64),y)
arch/x86/kernel/apic/io_apic.c +0 -269

296 lines not on this page · raw message

arch/x86/kernel/apic/msi.c new file +283 -0

283 lines not on this page · raw message

Signature · 1 line
1.7.10.4
author
#13 lore raw

RFC 11/18 x86, irq: Move HT IRQ related code from io_apic.c into htirq.c

In reply to Jiang Liu

Create arch/x86/kernel/apic/htirq.c to host Hypertransport IRQ related code, preparing for enabling hierarchy irqdomain.

---
 arch/x86/kernel/apic/Makefile  |    1 +
 arch/x86/kernel/apic/htirq.c   |  106 ++++++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/apic/io_apic.c |   91 ----------------------------------
 3 files changed, 107 insertions(+), 91 deletions(-)
 create mode 100644 arch/x86/kernel/apic/htirq.c
arch/x86/kernel/apic/Makefile +1 -0
index aac300750f0e..8bb12ddc5db8 100644
@@ -7,6 +7,7 @@ obj-y				+= hw_nmi.o
 
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_PCI_MSI)		+= msi.o
+obj-$(CONFIG_HT_IRQ)		+= htirq.o
 obj-$(CONFIG_SMP)		+= ipi.o
 
 ifeq ($(CONFIG_X86_64),y)
arch/x86/kernel/apic/htirq.c new file +106 -0

106 lines not on this page · raw message

arch/x86/kernel/apic/io_apic.c +0 -91

109 lines not on this page · raw message

Signature · 1 line
1.7.10.4
author
#14 lore raw

RFC 12/18 x86, irq: Move IOAPIC related declarations from hw_irq.h into io_apic.h

In reply to Jiang Liu

Clean up code by moving IOAPIC related declarations from hw_irq.h into io_apic.h.

---
 arch/x86/include/asm/hw_irq.h  |   33 ---------------------------------
 arch/x86/include/asm/io_apic.h |   23 ++++++++++++++++++++---
 arch/x86/kernel/apic/io_apic.c |   10 ++++++++++
 3 files changed, 30 insertions(+), 36 deletions(-)
arch/x86/include/asm/hw_irq.h +0 -33
index dca760e9cd12..7624fffc2822 100644
@@ -154,39 +154,6 @@ static inline void lock_vector_lock(void) {}
 static inline void unlock_vector_lock(void) {}
 #endif	/* CONFIG_X86_LOCAL_APIC */
 
-/* IOAPIC */
-#ifdef CONFIG_X86_IO_APIC
-struct io_apic_irq_attr {
-	int ioapic;
-	int ioapic_pin;
-	int trigger;
-	int polarity;
-};
-
-static inline void set_io_apic_irq_attr(struct io_apic_irq_attr *irq_attr,
-					int ioapic, int ioapic_pin,
-					int trigger, int polarity)
-{
-	irq_attr->ioapic	= ioapic;
-	irq_attr->ioapic_pin	= ioapic_pin;
-	irq_attr->trigger	= trigger;
-	irq_attr->polarity	= polarity;
-}
-
-extern void setup_IO_APIC(void);
-extern void enable_IO_APIC(void);
-extern void disable_IO_APIC(void);
-extern void setup_ioapic_dest(void);
-extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin);
-extern void print_IO_APICs(void);
-
-extern unsigned long io_apic_irqs;
-#define IO_APIC_IRQ(x) (((x) >= NR_IRQS_LEGACY) || ((1 << (x)) & io_apic_irqs))
-#else	/* CONFIG_X86_IO_APIC */
-#define IO_APIC_IRQ(x)	0
-static inline void print_IO_APICs(void) {}
-#endif	/* CONFIG_X86_IO_APIC */
-
 /* Statistics */
 extern atomic_t irq_err_count;
 extern atomic_t irq_mis_count;
arch/x86/include/asm/io_apic.h +20 -3
index a2245cb5ca3f..533803dc3733 100644
@@ -132,6 +132,10 @@ extern int noioapicquirk;
 /* -1 if "noapic" boot option passed */
 extern int noioapicreroute;
 
+extern unsigned long io_apic_irqs;
+
+#define IO_APIC_IRQ(x) (((x) >= NR_IRQS_LEGACY) || ((1 << (x)) & io_apic_irqs))
+
 /*
  * If we use the IO-APIC for IRQ routing, disable automatic
  * assignment of PCI IRQ's.
@@ -139,7 +143,6 @@ extern int noioapicreroute;
 #define io_apic_assign_pci_irqs \
 	(mp_irq_entries && !skip_ioapic_setup && io_apic_irqs)
 
-struct io_apic_irq_attr;
 struct irq_cfg;
 extern void ioapic_insert_resources(void);
 
@@ -157,6 +160,13 @@ extern int restore_ioapic_entries(void);
 extern void setup_ioapic_ids_from_mpc(void);
 extern void setup_ioapic_ids_from_mpc_nocheck(void);
 
+struct io_apic_irq_attr {
+	int ioapic;
+	int ioapic_pin;
+	int trigger;
+	int polarity;
+};
+
 enum ioapic_domain_type {
 	IOAPIC_DOMAIN_INVALID,
 	IOAPIC_DOMAIN_LEGACY,
@@ -196,6 +206,7 @@ extern int mp_set_gsi_attr(u32 gsi, int trigger, int polarity, int node);
 extern void __init pre_init_apic_IRQ0(void);
 
 extern void mp_save_irq(struct mpc_intsrc *m);
+extern bool mp_should_keep_irq(struct device *dev);
 
 extern void disable_ioapic_support(void);
 
@@ -226,13 +237,19 @@ static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned
 
 extern void io_apic_eoi(unsigned int apic, unsigned int vector);
 
-extern bool mp_should_keep_irq(struct device *dev);
-
+extern void setup_IO_APIC(void);
+extern void enable_IO_APIC(void);
+extern void disable_IO_APIC(void);
+extern void setup_ioapic_dest(void);
+extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin);
+extern void print_IO_APICs(void);
 #else  /* !CONFIG_X86_IO_APIC */
 
+#define IO_APIC_IRQ(x)		0
 #define io_apic_assign_pci_irqs 0
 #define setup_ioapic_ids_from_mpc x86_init_noop
 static inline void ioapic_insert_resources(void) { }
+static inline void print_IO_APICs(void) {}
 #define gsi_top (NR_IRQS_LEGACY)
 static inline int mp_find_ioapic(u32 gsi) { return 0; }
 static inline u32 mp_pin_to_gsi(int ioapic, int pin) { return UINT_MAX; }
arch/x86/kernel/apic/io_apic.c +10 -0
index bca60cd61950..e2b3e8b40fcb 100644
@@ -3014,6 +3014,16 @@ int mp_ioapic_registered(u32 gsi_base)
 	return 0;
 }
 
+static inline void set_io_apic_irq_attr(struct io_apic_irq_attr *irq_attr,
+					int ioapic, int ioapic_pin,
+					int trigger, int polarity)
+{
+	irq_attr->ioapic	= ioapic;
+	irq_attr->ioapic_pin	= ioapic_pin;
+	irq_attr->trigger	= trigger;
+	irq_attr->polarity	= polarity;
+}
+
 int mp_irqdomain_map(struct irq_domain *domain, unsigned int virq,
 		     irq_hw_number_t hwirq)
 {
Signature · 1 line
1.7.10.4
author
#15 lore raw

RFC 13/18 x86, irq: Move IRQ initialization routines from io_apic.c into vector.c

In reply to Jiang Liu

Move IRQ initialization routines from io_apic.c into vector.c, preparing for enabling hierarchy irqdomain.

---
 arch/x86/include/asm/io_apic.h |    2 ++
 arch/x86/kernel/apic/io_apic.c |   22 +---------------------
 arch/x86/kernel/apic/vector.c  |   28 ++++++++++++++++++++++++++++
 3 files changed, 31 insertions(+), 21 deletions(-)
arch/x86/include/asm/io_apic.h +2 -0
index 533803dc3733..7bf86bfe05b1 100644
@@ -145,6 +145,7 @@ extern unsigned long io_apic_irqs;
 
 struct irq_cfg;
 extern void ioapic_insert_resources(void);
+extern int arch_early_ioapic_init(void);
 
 extern int native_setup_ioapic_entry(int, struct IO_APIC_route_entry *,
 				     unsigned int, int,
@@ -249,6 +250,7 @@ extern void print_IO_APICs(void);
 #define io_apic_assign_pci_irqs 0
 #define setup_ioapic_ids_from_mpc x86_init_noop
 static inline void ioapic_insert_resources(void) { }
+static inline int arch_early_ioapic_init(void) { return 0; }
 static inline void print_IO_APICs(void) {}
 #define gsi_top (NR_IRQS_LEGACY)
 static inline int mp_find_ioapic(u32 gsi) { return 0; }
arch/x86/kernel/apic/io_apic.c +1 -21
index e2b3e8b40fcb..f51143507c1c 100644
@@ -245,7 +245,7 @@ static void free_ioapic_saved_registers(int idx)
 	ioapics[idx].saved_registers = NULL;
 }
 
-int __init arch_early_irq_init(void)
+int __init arch_early_ioapic_init(void)
 {
 	struct irq_cfg *cfg;
 	int i, node = cpu_to_node(0);
@@ -2486,26 +2486,6 @@ unsigned int arch_dynirq_lower_bound(unsigned int from)
 	return ioapic_initialized ? ioapic_dynirq_base : gsi_top;
 }
 
-int __init arch_probe_nr_irqs(void)
-{
-	int nr;
-
-	if (nr_irqs > (NR_VECTORS * nr_cpu_ids))
-		nr_irqs = NR_VECTORS * nr_cpu_ids;
-
-	nr = (gsi_top + nr_legacy_irqs()) + 8 * nr_cpu_ids;
-#if defined(CONFIG_PCI_MSI) || defined(CONFIG_HT_IRQ)
-	/*
-	 * for MSI and HT dyn irq
-	 */
-	nr += gsi_top * 16;
-#endif
-	if (nr < nr_irqs)
-		nr_irqs = nr;
-
-	return 0;
-}
-
 #ifdef CONFIG_X86_32
 static int io_apic_get_unique_id(int ioapic, int apic_id)
 {
arch/x86/kernel/apic/vector.c +28 -0
index f728cbfc29a9..2df1bff738b1 100644
@@ -235,6 +235,34 @@ void clear_irq_vector(int irq, struct irq_cfg *cfg)
 	raw_spin_unlock_irqrestore(&vector_lock, flags);
 }
 
+int __init arch_probe_nr_irqs(void)
+{
+	int nr;
+
+	if (nr_irqs > (NR_VECTORS * nr_cpu_ids))
+		nr_irqs = NR_VECTORS * nr_cpu_ids;
+
+	nr = (gsi_top + nr_legacy_irqs()) + 8 * nr_cpu_ids;
+#if defined(CONFIG_PCI_MSI) || defined(CONFIG_HT_IRQ)
+	/*
+	 * for MSI and HT dyn irq
+	 */
+	if (gsi_top <= NR_IRQS_LEGACY)
+		nr +=  8 * nr_cpu_ids;
+	else
+		nr += gsi_top * 16;
+#endif
+	if (nr < nr_irqs)
+		nr_irqs = nr;
+
+	return 0;
+}
+
+int __init arch_early_irq_init(void)
+{
+	return arch_early_ioapic_init();
+}
+
 static void __setup_vector_irq(int cpu)
 {
 	/* Initialize vector_irq on a new cpu */
Signature · 1 line
1.7.10.4
author
#16 lore raw

RFC 14/18 x86, irq: Make MSI and HT_IRQ indepenent of X86_IO_APIC

In reply to Jiang Liu

Now we have splitted functions to support MSI and HT_IRQ into vector.c, and they have no dependency on IOAPIC any more. So change Kconfig files to make MSI and HT_IRQ independent of X86_IO_APIC.

---
 arch/x86/Kconfig    |    4 ++--
 drivers/pci/Kconfig |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)
arch/x86/Kconfig +2 -2
index e0fc1e721ae2..7d0ca80d628f 100644
@@ -839,8 +839,8 @@ config X86_LOCAL_APIC
 	select GENERIC_IRQ_LEGACY_ALLOC_HWIRQ
 
 config X86_IO_APIC
-	def_bool y
-	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC || PCI_MSI
+	def_bool X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC
+	depends on X86_LOCAL_APIC
 	select IRQ_DOMAIN
 
 config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
drivers/pci/Kconfig +1 -1
index 39866d18004e..b9db0f2ce11f 100644
@@ -61,7 +61,7 @@ config XEN_PCIDEV_FRONTEND
 config HT_IRQ
 	bool "Interrupts on hypertransport devices"
 	default y
-	depends on PCI && X86_LOCAL_APIC && X86_IO_APIC
+	depends on PCI && X86_LOCAL_APIC
 	help
 	   This allows native hypertransport devices to use interrupts.
 
Signature · 1 line
1.7.10.4
author
#17 lore raw

RFC 15/18 x86, irq: Use helpers to access irq_cfg data structure associated with IRQ

In reply to Jiang Liu

Use helpers to access irq_cfg data structure associated with IRQ, instead of accessing irq_data->chip_data directly. Later we could rewrite those helpers to support hierarchy irqdomain.

---
 arch/x86/kernel/apic/htirq.c   |    2 +-
 arch/x86/kernel/apic/io_apic.c |   10 +++++-----
 arch/x86/kernel/apic/msi.c     |    6 +++---
 arch/x86/kernel/apic/vector.c  |    6 +++---
 arch/x86/platform/uv/uv_irq.c  |    4 ++--
 5 files changed, 14 insertions(+), 14 deletions(-)
arch/x86/kernel/apic/htirq.c +1 -1
index 1cd879fe39d7..6f527b02ac4c 100644
@@ -39,7 +39,7 @@ static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
 static int
 ht_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
 {
-	struct irq_cfg *cfg = data->chip_data;
+	struct irq_cfg *cfg = irqd_cfg(data);
 	unsigned int dest;
 	int ret;
 
arch/x86/kernel/apic/io_apic.c +5 -5
index f51143507c1c..e02e78ec579f 100644
@@ -501,7 +501,7 @@ static void mask_ioapic(struct irq_cfg *cfg)
 
 static void mask_ioapic_irq(struct irq_data *data)
 {
-	mask_ioapic(data->chip_data);
+	mask_ioapic(irqd_cfg(data));
 }
 
 static void __unmask_ioapic(struct irq_cfg *cfg)
@@ -520,7 +520,7 @@ static void unmask_ioapic(struct irq_cfg *cfg)
 
 static void unmask_ioapic_irq(struct irq_data *data)
 {
-	unmask_ioapic(data->chip_data);
+	unmask_ioapic(irqd_cfg(data));
 }
 
 /*
@@ -1801,7 +1801,7 @@ static unsigned int startup_ioapic_irq(struct irq_data *data)
 		if (legacy_pic->irq_pending(irq))
 			was_pending = 1;
 	}
-	__unmask_ioapic(data->chip_data);
+	__unmask_ioapic(irqd_cfg(data));
 	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	return was_pending;
@@ -1852,7 +1852,7 @@ int native_ioapic_set_affinity(struct irq_data *data,
 	if (!ret) {
 		/* Only the high 8 bits are valid. */
 		dest = SET_APIC_LOGICAL_ID(dest);
-		__target_IO_APIC_irq(irq, dest, data->chip_data);
+		__target_IO_APIC_irq(irq, dest, irqd_cfg(data));
 		ret = IRQ_SET_MASK_OK_NOCOPY;
 	}
 	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
@@ -1943,7 +1943,7 @@ static inline void ioapic_irqd_unmask(struct irq_data *data,
 
 static void ack_ioapic_level(struct irq_data *data)
 {
-	struct irq_cfg *cfg = data->chip_data;
+	struct irq_cfg *cfg = irqd_cfg(data);
 	int i, irq = data->irq;
 	unsigned long v;
 	bool masked;
arch/x86/kernel/apic/msi.c +3 -3
index 8ad0046849f3..fb45663395ca 100644
@@ -78,7 +78,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq,
 static int
 msi_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
 {
-	struct irq_cfg *cfg = data->chip_data;
+	struct irq_cfg *cfg = irqd_cfg(data);
 	struct msi_msg msg;
 	unsigned int dest;
 	int ret;
@@ -179,7 +179,7 @@ static int
 dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask,
 		      bool force)
 {
-	struct irq_cfg *cfg = data->chip_data;
+	struct irq_cfg *cfg = irqd_cfg(data);
 	unsigned int dest, irq = data->irq;
 	struct msi_msg msg;
 	int ret;
@@ -233,7 +233,7 @@ int arch_setup_dmar_msi(unsigned int irq)
 static int hpet_msi_set_affinity(struct irq_data *data,
 				 const struct cpumask *mask, bool force)
 {
-	struct irq_cfg *cfg = data->chip_data;
+	struct irq_cfg *cfg = irqd_cfg(data);
 	struct msi_msg msg;
 	unsigned int dest;
 	int ret;
arch/x86/kernel/apic/vector.c +3 -3
index 2df1bff738b1..7562cb15b3bd 100644
@@ -321,7 +321,7 @@ void setup_vector_irq(int cpu)
 
 int apic_retrigger_irq(struct irq_data *data)
 {
-	struct irq_cfg *cfg = data->chip_data;
+	struct irq_cfg *cfg = irqd_cfg(data);
 	unsigned long flags;
 	int cpu;
 
@@ -335,7 +335,7 @@ int apic_retrigger_irq(struct irq_data *data)
 
 void apic_ack_edge(struct irq_data *data)
 {
-	irq_complete_move(data->chip_data);
+	irq_complete_move(irqd_cfg(data));
 	irq_move_irq(data);
 	ack_APIC_irq();
 }
@@ -348,7 +348,7 @@ void apic_ack_edge(struct irq_data *data)
 int apic_set_affinity(struct irq_data *data, const struct cpumask *mask,
 		      unsigned int *dest_id)
 {
-	struct irq_cfg *cfg = data->chip_data;
+	struct irq_cfg *cfg = irqd_cfg(data);
 	unsigned int irq = data->irq;
 	int err;
 
arch/x86/platform/uv/uv_irq.c +2 -2
index 3e8fab740c1d..0ce673645432 100644
@@ -131,7 +131,7 @@ arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
 		       unsigned long mmr_offset, int limit)
 {
 	const struct cpumask *eligible_cpu = cpumask_of(cpu);
-	struct irq_cfg *cfg = irq_get_chip_data(irq);
+	struct irq_cfg *cfg = irq_cfg(irq);
 	unsigned long mmr_value;
 	struct uv_IO_APIC_route_entry *entry;
 	int mmr_pnode, err;
@@ -198,7 +198,7 @@ static int
 uv_set_irq_affinity(struct irq_data *data, const struct cpumask *mask,
 		    bool force)
 {
-	struct irq_cfg *cfg = data->chip_data;
+	struct irq_cfg *cfg = irqd_cfg(data);
 	unsigned int dest;
 	unsigned long mmr_value, mmr_offset;
 	struct uv_IO_APIC_route_entry *entry;
Signature · 1 line
1.7.10.4
author
#18 lore raw

RFC 16/18 x86: irq_remapping: Use helpers to access irq_cfg data structure associated with IRQ

In reply to Jiang Liu

Use helpers to access irq_cfg data structure associated with IRQ, instead of accessing irq_data->chip_data directly. Later we could rewrite those helpers to support hierarchy irqdomain.

---
 drivers/iommu/irq_remapping.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/iommu/irq_remapping.c +3 -3
index 33c439524080..34d01de91bd7 100644
@@ -305,7 +305,7 @@ static int set_remapped_irq_affinity(struct irq_data *data,
 
 void free_remapped_irq(int irq)
 {
-	struct irq_cfg *cfg = irq_get_chip_data(irq);
+	struct irq_cfg *cfg = irq_cfg(irq);
 
 	if (!remap_ops || !remap_ops->free_irq)
 		return;
@@ -318,7 +318,7 @@ void compose_remapped_msi_msg(struct pci_dev *pdev,
 			      unsigned int irq, unsigned int dest,
 			      struct msi_msg *msg, u8 hpet_id)
 {
-	struct irq_cfg *cfg = irq_get_chip_data(irq);
+	struct irq_cfg *cfg = irq_cfg(irq);
 
 	if (!irq_remapped(cfg))
 		native_compose_msi_msg(pdev, irq, dest, msg, hpet_id);
@@ -365,7 +365,7 @@ static void ir_ack_apic_edge(struct irq_data *data)
 static void ir_ack_apic_level(struct irq_data *data)
 {
 	ack_APIC_irq();
-	eoi_ioapic_irq(data->irq, data->chip_data);
+	eoi_ioapic_irq(data->irq, irqd_cfg(data));
 }
 
 static void ir_print_prefix(struct irq_data *data, struct seq_file *p)
Signature · 1 line
1.7.10.4
author
#19 lore raw

RFC 17/18 iommu/vt-d: Use helpers to access irq_cfg data structure associated with IRQ

In reply to Jiang Liu

Use helpers to access irq_cfg data structure associated with IRQ, instead of accessing irq_data->chip_data directly. Later we could rewrite those helpers to support hierarchy irqdomain.

---
 drivers/iommu/intel_irq_remapping.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/iommu/intel_irq_remapping.c +5 -5
index 0df41f6264f5..319b39edcf7e 100644
@@ -55,7 +55,7 @@ static int __init parse_ioapics_under_ir(void);
 
 static struct irq_2_iommu *irq_2_iommu(unsigned int irq)
 {
-	struct irq_cfg *cfg = irq_get_chip_data(irq);
+	struct irq_cfg *cfg = irq_cfg(irq);
 	return cfg ? &cfg->irq_2_iommu : NULL;
 }
 
@@ -86,7 +86,7 @@ static int alloc_irte(struct intel_iommu *iommu, int irq, u16 count)
 {
 	struct ir_table *table = iommu->ir_table;
 	struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
-	struct irq_cfg *cfg = irq_get_chip_data(irq);
+	struct irq_cfg *cfg = irq_cfg(irq);
 	unsigned int mask = 0;
 	unsigned long flags;
 	int index;
@@ -154,7 +154,7 @@ static int map_irq_to_irte_handle(int irq, u16 *sub_handle)
 static int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index, u16 subhandle)
 {
 	struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
-	struct irq_cfg *cfg = irq_get_chip_data(irq);
+	struct irq_cfg *cfg = irq_cfg(irq);
 	unsigned long flags;
 
 	if (!irq_iommu)
@@ -1009,7 +1009,7 @@ static int
 intel_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
 			  bool force)
 {
-	struct irq_cfg *cfg = data->chip_data;
+	struct irq_cfg *cfg = irqd_cfg(data);
 	unsigned int dest, irq = data->irq;
 	struct irte irte;
 	int err;
@@ -1064,7 +1064,7 @@ static void intel_compose_msi_msg(struct pci_dev *pdev,
 	u16 sub_handle = 0;
 	int ir_index;
 
-	cfg = irq_get_chip_data(irq);
+	cfg = irq_cfg(irq);
 
 	ir_index = map_irq_to_irte_handle(irq, &sub_handle);
 	BUG_ON(ir_index == -1);
Signature · 1 line
1.7.10.4
author
#20 lore raw

RFC 18/18 iommu/amd: Use helpers to access irq_cfg data structure associated with IRQ

In reply to Jiang Liu

Use helpers to access irq_cfg data structure associated with IRQ, instead of accessing irq_data->chip_data directly. Later we could rewrite those helpers to support hierarchy irqdomain.

---
 drivers/iommu/amd_iommu.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/iommu/amd_iommu.c +7 -7
index ecb0109a5360..e0def6249284 100644
@@ -4049,7 +4049,7 @@ static int setup_ioapic_entry(int irq, struct IO_APIC_route_entry *entry,
 	int devid;
 	int ret;
 
-	cfg = irq_get_chip_data(irq);
+	cfg = irq_cfg(irq);
 	if (!cfg)
 		return -EINVAL;
 
@@ -4112,7 +4112,7 @@ static int set_affinity(struct irq_data *data, const struct cpumask *mask,
 	if (!config_enabled(CONFIG_SMP))
 		return -1;
 
-	cfg       = data->chip_data;
+	cfg       = irqd_cfg(data);
 	irq       = data->irq;
 	irte_info = &cfg->irq_2_irte;
 
@@ -4150,7 +4150,7 @@ static int free_irq(int irq)
 	struct irq_2_irte *irte_info;
 	struct irq_cfg *cfg;
 
-	cfg = irq_get_chip_data(irq);
+	cfg = irq_cfg(irq);
 	if (!cfg)
 		return -EINVAL;
 
@@ -4169,7 +4169,7 @@ static void compose_msi_msg(struct pci_dev *pdev,
 	struct irq_cfg *cfg;
 	union irte irte;
 
-	cfg = irq_get_chip_data(irq);
+	cfg = irq_cfg(irq);
 	if (!cfg)
 		return;
 
@@ -4198,7 +4198,7 @@ static int msi_alloc_irq(struct pci_dev *pdev, int irq, int nvec)
 	if (!pdev)
 		return -EINVAL;
 
-	cfg = irq_get_chip_data(irq);
+	cfg = irq_cfg(irq);
 	if (!cfg)
 		return -EINVAL;
 
@@ -4218,7 +4218,7 @@ static int msi_setup_irq(struct pci_dev *pdev, unsigned int irq,
 	if (!pdev)
 		return -EINVAL;
 
-	cfg = irq_get_chip_data(irq);
+	cfg = irq_cfg(irq);
 	if (!cfg)
 		return -EINVAL;
 
@@ -4241,7 +4241,7 @@ static int setup_hpet_msi(unsigned int irq, unsigned int id)
 	struct irq_cfg *cfg;
 	int index, devid;
 
-	cfg = irq_get_chip_data(irq);
+	cfg = irq_cfg(irq);
 	if (!cfg)
 		return -EINVAL;
 
Signature · 1 line
1.7.10.4