Skip to contentSkip to conversation

ath9k: Fix beacon processing in offchannel

PATCH New Sujith Manoharan 1 participant 1 message Sep 12, 2014 Qualcomm Atheros ATH9K wireless driver

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ath9k: Fix beacon processing in offchannel

From: Sujith Manoharan <[email protected]>

When interfaces of different types are present in a context and an offchannel request is received on a STA interface, we end up trying to process beacons received when we are offchannel. This hits the below warning since offchannel will not have proper beacon parameters.

Fix this by not processing beacons received when we are offchannel.

------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at ../drivers/net/wireless/ath/ath9k/recv.c:552 ath_rx_tasklet+0xf8f/0x1020 [ath9k]()
CPU: 1 PID: 0 Comm: swapper/1 Tainted: G           O   3.17.0-rc4-wl-debug #16
Hardware name: LENOVO 28427ZQ/INVALID, BIOS 6JET58WW (1.16 ) 09/17/2009
 0000000000000000 15916787056abba3 ffff88013b603d08 ffffffff8156af94
 ffff88013b603d50 ffff88013b603d40 ffffffff81070dbd ffff8800a84bb300
 ffff8800b05db358 ffff8800a84cc578 ffff8800a84bb300 ffff8800b05daa40
Call Trace:
 <IRQ>  [<ffffffff8156af94>] dump_stack+0x4d/0x6f
 [<ffffffff81070dbd>] warn_slowpath_common+0x7d/0xa0
 [<ffffffff81070e3c>] warn_slowpath_fmt+0x5c/0x80
 [<ffffffff81572143>] ? _raw_spin_lock_irqsave+0x83/0xa0
 [<ffffffffa09d04a6>] ? ath_rx_tasklet+0x9f6/0x1020 [ath9k]
 [<ffffffffa09d0a3f>] ath_rx_tasklet+0xf8f/0x1020 [ath9k]
 [<ffffffffa09cd4f4>] ath9k_tasklet+0xf4/0x310 [ath9k]
 [<ffffffff81075a97>] tasklet_action+0xe7/0xf0
 [<ffffffff8107508a>] __do_softirq+0x12a/0x340
 [<ffffffff8107544e>] irq_exit+0x9e/0xc0
 [<ffffffff81575e56>] do_IRQ+0x56/0xe0
 [<ffffffff81573c72>] common_interrupt+0x72/0x72
 <EOI>  [<ffffffff81421037>] ? cpuidle_enter_state+0x67/0x1a0
 [<ffffffff81421257>] cpuidle_enter+0x17/0x20
 [<ffffffff810b3ebe>] cpu_startup_entry+0x3ce/0x420
 [<ffffffff81048563>] start_secondary+0x233/0x2c0
---[ end trace f15c3e33ba78d840 ]---
------------[ cut here ]------------
---
 drivers/net/wireless/ath/ath9k/recv.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/net/wireless/ath/ath9k/recv.c +9 -1
index 957a877..dea8e1b 100644
@@ -537,6 +537,7 @@ static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb)
 static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
 {
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+	bool skip_beacon = false;
 
 	if (skb->len < 24 + 8 + 2 + 2)
 		return;
@@ -547,7 +548,14 @@ static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
 		sc->ps_flags &= ~PS_BEACON_SYNC;
 		ath_dbg(common, PS,
 			"Reconfigure beacon timers based on synchronized timestamp\n");
-		if (!(WARN_ON_ONCE(sc->cur_chan->beacon.beacon_interval == 0)))
+
+		if (ath9k_is_chanctx_enabled()) {
+			if (sc->cur_chan == &sc->offchannel.chan)
+				skip_beacon = true;
+		}
+
+		if (!skip_beacon &&
+		    !(WARN_ON_ONCE(sc->cur_chan->beacon.beacon_interval == 0)))
 			ath9k_set_beacon(sc);
 
 		ath9k_p2p_beacon_sync(sc);
Signature · 1 line
2.1.0