Skip to contentSkip to conversation

phy: marvell: move IDs to own header

PATCH Applied Lucas Stach 2 participants 3 messages Sep 16, 2014 – Sep 17, 2014

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 phy: marvell: move IDs to own header

So they can be used in board files to register
fixups.

---
 drivers/net/phy/marvell.c   | 17 +----------------
 include/linux/marvell_phy.h | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 35 insertions(+), 16 deletions(-)
 create mode 100644 include/linux/marvell_phy.h
drivers/net/phy/marvell.c +1 -16
index 34f852e..f2bc649 100644
@@ -10,22 +10,7 @@
 #include <linux/ethtool.h>
 #include <linux/phy.h>
 #include <linux/smscphy.h>
-
-/* Known PHY IDs */
-#define MARVELL_PHY_ID_88E1101		0x01410c60
-#define MARVELL_PHY_ID_88E1112		0x01410c90
-#define MARVELL_PHY_ID_88E1111		0x01410cc0
-#define MARVELL_PHY_ID_88E1118		0x01410e10
-#define MARVELL_PHY_ID_88E1121R		0x01410cb0
-#define MARVELL_PHY_ID_88E1145		0x01410cd0
-#define MARVELL_PHY_ID_88E1149R		0x01410e50
-#define MARVELL_PHY_ID_88E1240		0x01410e30
-#define MARVELL_PHY_ID_88E1318S		0x01410e90
-#define MARVELL_PHY_ID_88E1116R		0x01410e40
-#define MARVELL_PHY_ID_88E1510		0x01410dd0
-
-/* Mask used for ID comparisons */
-#define MARVELL_PHY_ID_MASK		0xfffffff0
+#include <linux/marvell_phy.h>
 
 /* Marvell Register Page register */
 #define MII_MARVELL_PHY_PAGE		22
include/linux/marvell_phy.h new file +34 -0
new file mode 100644
index 0000000..bf2c66a
@@ -0,0 +1,34 @@
+/*
+ * Marvell PHY IDs
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MARVELL_PHY_H
+#define _MARVELL_PHY_H
+
+/* Known PHY IDs */
+#define MARVELL_PHY_ID_88E1101		0x01410c60
+#define MARVELL_PHY_ID_88E1112		0x01410c90
+#define MARVELL_PHY_ID_88E1111		0x01410cc0
+#define MARVELL_PHY_ID_88E1118		0x01410e10
+#define MARVELL_PHY_ID_88E1121R		0x01410cb0
+#define MARVELL_PHY_ID_88E1145		0x01410cd0
+#define MARVELL_PHY_ID_88E1149R		0x01410e50
+#define MARVELL_PHY_ID_88E1240		0x01410e30
+#define MARVELL_PHY_ID_88E1318S		0x01410e90
+#define MARVELL_PHY_ID_88E1116R		0x01410e40
+#define MARVELL_PHY_ID_88E1510		0x01410dd0
+
+/* Mask used for ID comparisons */
+#define MARVELL_PHY_ID_MASK		0xfffffff0
+
+#endif /* _MARVELL_PHY_H */
Signature · 7 lines
1.9.3


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#1 lore raw

PATCH v2 2/2 arm: imx6: add Gateworks Ventana board

For now only the Quad 1GB variant is supported.

Tested:
- starting barebox over USB
- writing barebox to NAND with barebox_update
- starting Linux kernel over TFTP

---
v2:
- fix whitespace errors
- check return value from i2c_get_adapter()
- add delay after writing to GSC

---
 arch/arm/boards/Makefile                           |  1 +
 arch/arm/boards/gateworks-ventana/Makefile         |  2 +
 arch/arm/boards/gateworks-ventana/board.c          | 96 ++++++++++++++++++++++
 arch/arm/boards/gateworks-ventana/clocks.imxcfg    |  8 ++
 .../flash-header-ventana-quad-1gx64.imxcfg         | 11 +++
 arch/arm/boards/gateworks-ventana/gsc.c            | 67 +++++++++++++++
 arch/arm/boards/gateworks-ventana/gsc.h            | 58 +++++++++++++
 arch/arm/boards/gateworks-ventana/lowlevel.c       | 18 ++++
 .../boards/gateworks-ventana/quad_128x64.imxcfg    | 41 +++++++++
 arch/arm/boards/gateworks-ventana/ram-base.imxcfg  | 56 +++++++++++++
 arch/arm/configs/imx_v7_defconfig                  |  3 +-
 arch/arm/dts/Makefile                              |  1 +
 arch/arm/dts/imx6q-gw54xx.dts                      | 23 ++++++
 arch/arm/dts/imx6qdl-gw54xx.dtsi                   | 38 +++++++++
 arch/arm/mach-imx/Kconfig                          |  3 +
 images/Makefile.imx                                |  5 ++
 16 files changed, 430 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boards/gateworks-ventana/Makefile
 create mode 100644 arch/arm/boards/gateworks-ventana/board.c
 create mode 100644 arch/arm/boards/gateworks-ventana/clocks.imxcfg
 create mode 100644 arch/arm/boards/gateworks-ventana/flash-header-ventana-quad-1gx64.imxcfg
 create mode 100644 arch/arm/boards/gateworks-ventana/gsc.c
 create mode 100644 arch/arm/boards/gateworks-ventana/gsc.h
 create mode 100644 arch/arm/boards/gateworks-ventana/lowlevel.c
 create mode 100644 arch/arm/boards/gateworks-ventana/quad_128x64.imxcfg
 create mode 100644 arch/arm/boards/gateworks-ventana/ram-base.imxcfg
 create mode 100644 arch/arm/dts/imx6q-gw54xx.dts
 create mode 100644 arch/arm/dts/imx6qdl-gw54xx.dtsi
arch/arm/boards/Makefile +1 -0
index 122f5cd..a703f1d 100644
@@ -48,6 +48,7 @@ obj-$(CONFIG_MACH_GLOBALSCALE_MIRABOX)		+= globalscale-mirabox/
 obj-$(CONFIG_MACH_GUF_CUPID)			+= guf-cupid/
 obj-$(CONFIG_MACH_GUF_SANTARO)			+= guf-santaro/
 obj-$(CONFIG_MACH_GUF_VINCELL)			+= guf-vincell/
+obj-$(CONFIG_MACH_GW_VENTANA)			+= gateworks-ventana/
 obj-$(CONFIG_MACH_HIGHBANK)			+= highbank/
 obj-$(CONFIG_MACH_IMX21ADS)			+= freescale-mx21-ads/
 obj-$(CONFIG_MACH_IMX233_OLINUXINO)		+= imx233-olinuxino/
arch/arm/boards/gateworks-ventana/Makefile new file +2 -0
new file mode 100644
index 0000000..7d195ee
@@ -0,0 +1,2 @@
+obj-y += board.o gsc.o
+lwl-y += lowlevel.o
arch/arm/boards/gateworks-ventana/board.c new file +96 -0

96 lines not on this page · raw message

arch/arm/boards/gateworks-ventana/clocks.imxcfg new file +8 -0
new file mode 100644
index 0000000..bfd5331
@@ -0,0 +1,8 @@
+wm 32 MX6_CCM_CCGR0	0x00C03F3F
+wm 32 MX6_CCM_CCGR1	0x0030FC03
+wm 32 MX6_CCM_CCGR2	0x0FFFC000
+wm 32 MX6_CCM_CCGR3	0x3FF00000
+wm 32 MX6_CCM_CCGR4	0xFFFFF300
+wm 32 MX6_CCM_CCGR5	0x0F0000C3
+wm 32 MX6_CCM_CCGR6	0x000003FF
+wm 32 MX6_CCM_CCOSR	0x000000FB
arch/arm/boards/gateworks-ventana/flash-header-ventana-quad-1gx64.imxcfg new file +11 -0
new file mode 100644
index 0000000..75271e4
@@ -0,0 +1,11 @@
+soc imx6
+loadaddr 0x20000000
+dcdofs 0x400
+
+#include <mach/imx6-ddr-regs.h>
+#include <mach/imx6q-ddr-regs.h>
+#include <mach/imx6-ccm-regs.h>
+
+#include "ram-base.imxcfg"
+#include "quad_128x64.imxcfg"
+#include "clocks.imxcfg"
arch/arm/boards/gateworks-ventana/gsc.c new file +67 -0

67 lines not on this page · raw message

arch/arm/boards/gateworks-ventana/gsc.h new file +58 -0

58 lines not on this page · raw message

arch/arm/boards/gateworks-ventana/lowlevel.c new file +18 -0
new file mode 100644
index 0000000..10b2c4c
@@ -0,0 +1,18 @@
+#include <common.h>
+#include <sizes.h>
+#include <mach/generic.h>
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+
+extern char __dtb_imx6q_gw54xx_start[];
+
+ENTRY_FUNCTION(start_imx6q_gw54xx_1gx64, r0, r1, r2)
+{
+	void *fdt;
+
+	imx6_cpu_lowlevel_init();
+
+	fdt = __dtb_imx6q_gw54xx_start - get_runtime_offset();
+
+	barebox_arm_entry(0x10000000, SZ_1G, fdt);
+}
arch/arm/boards/gateworks-ventana/quad_128x64.imxcfg new file +41 -0

41 lines not on this page · raw message

arch/arm/boards/gateworks-ventana/ram-base.imxcfg new file +56 -0

56 lines not on this page · raw message

arch/arm/configs/imx_v7_defconfig +2 -1
index cad47fd..2c8eb85 100644
@@ -1,6 +1,7 @@
 CONFIG_ARCH_IMX=y
 CONFIG_IMX_MULTI_BOARDS=y
 CONFIG_MACH_EFIKA_MX_SMARTBOOK=y
+CONFIG_MACH_EMBEDSKY_E9=y
 CONFIG_MACH_FREESCALE_MX51_PDK=y
 CONFIG_MACH_FREESCALE_MX53_LOCO=y
 CONFIG_MACH_TQMA53=y
@@ -16,10 +17,10 @@ CONFIG_MACH_SABRELITE=y
 CONFIG_MACH_SABRESD=y
 CONFIG_MACH_NITROGEN6X=y
 CONFIG_MACH_SOLIDRUN_MICROSOM=y
-CONFIG_MACH_EMBEDSKY_E9=y
 CONFIG_MACH_EMBEST_RIOTBOARD=y
 CONFIG_MACH_UDOO=y
 CONFIG_MACH_VARISCITE_MX6=y
+CONFIG_MACH_GW_VENTANA=y
 CONFIG_IMX_IIM=y
 CONFIG_IMX_IIM_FUSE_BLOW=y
 CONFIG_IMX_OCOTP=y
arch/arm/dts/Makefile +1 -0
index dcf014d..2a2d292 100644
@@ -17,6 +17,7 @@ pbl-dtb-$(CONFIG_MACH_GK802) += imx6q-gk802.dtb.o
 pbl-dtb-$(CONFIG_MACH_GLOBALSCALE_GURUPLUG) += kirkwood-guruplug-server-plus-bb.dtb.o
 pbl-dtb-$(CONFIG_MACH_GLOBALSCALE_MIRABOX) += armada-370-mirabox-bb.dtb.o
 pbl-dtb-$(CONFIG_MACH_GUF_SANTARO) += imx6q-guf-santaro.dtb.o
+pbl-dtb-$(CONFIG_MACH_GW_VENTANA) += imx6q-gw54xx.dtb.o
 pbl-dtb-$(CONFIG_MACH_MARVELL_ARMADA_XP_GP) += armada-xp-gp-bb.dtb.o
 pbl-dtb-$(CONFIG_MACH_NITROGEN6X) += imx6q-nitrogen6x.dtb.o imx6dl-nitrogen6x.dtb.o
 pbl-dtb-$(CONFIG_MACH_NVIDIA_BEAVER) += tegra30-beaver.dtb.o
arch/arm/dts/imx6q-gw54xx.dts new file +23 -0
new file mode 100644
index 0000000..ab518d6
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw54xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Quad GW54XX";
+	compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
arch/arm/dts/imx6qdl-gw54xx.dtsi new file +38 -0
new file mode 100644
index 0000000..ea5739d
@@ -0,0 +1,38 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+ #include <arm/imx6qdl-gw54xx.dtsi>
+
+ / {
+	chosen {
+		linux,stdout-path = &uart2;
+
+		environment@0 {
+			compatible = "barebox,environment";
+			device-path = &gpmi, "partname:barebox-environment";
+		};
+	};
+};
+
+&gpmi {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	partition@0 {
+		label = "barebox";
+		reg = <0x0 0x400000>;
+	};
+
+	partition@1 {
+		label = "barebox-environment";
+		reg = <0x400000 0x20000>;
+	};
+};
arch/arm/mach-imx/Kconfig +3 -0
index 53a44a0..d381d39 100644
@@ -291,6 +291,9 @@ config MACH_VARISCITE_MX6
 	bool "Variscite i.MX6 Quad SOM"
 	select ARCH_IMX6
 
+config MACH_GW_VENTANA
+	bool "Gateworks Ventana SBC"
+	select ARCH_IMX6
 
 endif
 
images/Makefile.imx +5 -0
index e559a75..f722136 100644
@@ -194,3 +194,8 @@ pblx-$(CONFIG_MACH_PCAAXL3) += start_phytec_pbaa03_2gib
 CFG_start_phytec_pbaa03_2gib.pblx.imximg = $(board)/phytec-phycard-imx6/flash-header-phytec-pcaaxl3-2gib.imxcfg
 FILE_barebox-phytec-pbaa03-2gib.img = start_phytec_pbaa03_2gib.pblx.imximg
 image-$(CONFIG_MACH_PCAAXL3) += barebox-phytec-pbaa03-2gib.img
+
+pblx-$(CONFIG_MACH_GW_VENTANA) += start_imx6q_gw54xx_1gx64
+CFG_start_imx6q_gw54xx_1gx64.pblx.imximg = $(board)/gateworks-ventana/flash-header-ventana-quad-1gx64.imxcfg
+FILE_barebox-gateworks-imx6q-ventana-1gx64.img = start_imx6q_gw54xx_1gx64.pblx.imximg
+image-$(CONFIG_MACH_GW_VENTANA) += barebox-gateworks-imx6q-ventana-1gx64.img
Signature · 7 lines
1.9.3


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
maintainer Applied
#2 lore raw
In reply to Lucas Stach
Quoted 4 lines · Lucas Stach

So they can be used in board files to register
fixups.

Applied both, thanks

Sascha

Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox