Skip to contentSkip to conversation

piping password to cryptsetup

dm-crypt frodowiz 3 participants 4 messages Sep 18, 2014 – Sep 27, 2014

lore
Share & tools
lore

frodowiz

author
#0 lore raw

i have been to so many forums to find a solution to this. all the variations are confusing me and none are working. i am trying to pipe a passphrase to cryptsetup using yad.

pass1=yad --form --title="Enter container passphrase" --height=50 --width=350 --field=Password:H

then i strip out the pipe character present between yad variables

pass="${pass1//|}"

at this point the variable pass appears to be exactly what i want.

later on i invoke cryptsetup with the passphrase variable piped to it.

echo "$pass" | cryptsetup --cipher aes-xts-plain --key-size 512 --hash sha512 --iter-time 5000 --use-random luksFormat "$container" -

after a moment, i see the device pop into the selection in my file manager then it dissapears.

the funny thing is, i wrote a terminal only version using the same methods minus the yad things and it works fine(see attached)

terminal version requires 3 confirmations YES, passphrase, passphrase. do i need to reproduce these confirmations even with a minus sign at the end of the cryptsetup line?

if so, would echo "YES"$'\n'"$pass"$'\n'"$pass"'\n' do this?

also, if i replace the echo "$pass" pipe with xterm -e cryptsetup.... it works fine. basically, i am not getting the password format piped correctly. ive seen 7 different variations on this pipe and nothing is working. its probably something with spaces but i am resorting to email to lower my bloodpressure. also avoiding forums to lower my heart rate :)

thanks to anyone reading this.
Erik

#1 lore raw

I don't know anything about yad, but here's what worked for me some years ago:

echo -n "passphrase" \
| cryptsetup --key-file="-" luksOpen /dev/sda5 name1

Replace /dev/sda5 with whatever the relevant device name is.

Let us know if this works for you. (Hope it does.)

ken

Quoted 45 lines · frodowiz

i have been to so many forums to find a solution to this. all the variations are confusing me and none are working.
i am trying to pipe a passphrase to cryptsetup using yad.

pass1=`yad --form --title="Enter container passphrase" --height=50
--width=350 --field=Password:H`

then i strip out the pipe character present between yad variables

pass="${pass1//|}"

at this point the variable pass appears to be exactly what i want.

later on i invoke cryptsetup with the passphrase variable piped to it.

echo "$pass" | cryptsetup --cipher aes-xts-plain --key-size 512 --hash sha512 --iter-time 5000 --use-random luksFormat "$container" -

after a moment, i see the device pop into the selection in my file manager then it dissapears.

the funny thing is, i wrote a terminal only version using the same methods minus the yad things and it works fine(see attached)

terminal version requires 3 confirmations YES, passphrase, passphrase. do i need to reproduce these confirmations even with a minus sign at the end of the cryptsetup line?

if so, would echo "YES"$'\n'"$pass"$'\n'"$pass"'\n' do this?

also, if i replace the echo "$pass" pipe with xterm -e cryptsetup.... it works fine. basically, i am not getting the password format piped correctly. ive seen 7 different variations on this pipe and nothing is working. its probably something with spaces but i am resorting to email to lower my bloodpressure. also avoiding forums to lower my heart rate :)

thanks to anyone reading this.
Erik

_______________________________________________
dm-crypt mailing list
[email protected]
http://www.saout.de/mailman/listinfo/dm-crypt

#2 lore raw
In reply to frodowiz
Quoted 37 lines · frodowiz

i have been to so many forums to find a solution to this. all the variations are confusing me and none are working.
i am trying to pipe a passphrase to cryptsetup using yad.

pass1=`yad --form --title="Enter container passphrase" --height=50
--width=350 --field=Password:H`

then i strip out the pipe character present between yad variables

pass="${pass1//|}"

at this point the variable pass appears to be exactly what i want.

later on i invoke cryptsetup with the passphrase variable piped to it.

echo "$pass" | cryptsetup --cipher aes-xts-plain --key-size 512 --hash sha512 --iter-time 5000 --use-random luksFormat "$container" -

after a moment, i see the device pop into the selection in my file manager then it dissapears.

the funny thing is, i wrote a terminal only version using the same methods minus the yad things and it works fine(see attached)

terminal version requires 3 confirmations YES, passphrase, passphrase. do i need to reproduce these confirmations even with a minus sign at the end of the cryptsetup line?

if so, would echo "YES"$'\n'"$pass"$'\n'"$pass"'\n' do this?

also, if i replace the echo "$pass" pipe with xterm -e cryptsetup.... it works fine. basically, i am not getting the password format piped correctly. ive seen 7 different variations on this pipe and nothing is working. its probably something with spaces but i am resorting to email to lower my bloodpressure. also avoiding forums to lower my heart rate :)

Quoted 8 lines

thanks to anyone reading this.
Erik

_______________________________________________
dm-crypt mailing list
[email protected]
http://www.saout.de/mailman/listinfo/dm-crypt

Hi Erik,

you want to use "echo -n" for piping the password without a trailing newline and "cryptsetup -q ..." in your scripts to avoid any additional user input.

Konstantin

author
#3 lore raw

Konstantin Bläsi <ktrackfd@...> writes:

i just wanted to say thank you to the replies. for some reason, possibly a race condition?, the problem dissapeared after i wrote this original post. seeing the replies helped me stick to the path i was on and voila!.

echo "$pass" | cryptsetup --cipher aes-xts-plain --key-size 512 --hash sha512 --iter-time 10000 --use-urandom luksFormat "$container"

works with "$container" and "$pass" defined earlier in a graphical dialog.

thanks again for all your work on this.
erik