binutils: fix 'call8: call target out of range' xtensa ld bug
PATCH 1/1 binutils: fix 'call8: call target out of range' xtensa ld bug
This fixes the following linux kernel build errors:
LD init/built-in.o
net/built-in.o: In function `raw_proc_exit':
(.init.text+0xe29): dangerous relocation:
call8: call target out of range: udp_proc_register
net/built-in.o: In function `udp_table_init':
(.init.text+0xf09): dangerous relocation:
call8: call target out of range: udp_proc_register
net/built-in.o: In function `inet_init':
af_inet.c:(.init.text+0x142e): dangerous relocation:
call8: call target out of range: udp4_proc_exit
net/built-in.o: In function `ip_auto_config':
ipconfig.c:(.init.text+0x28aa): dangerous relocation:
call8: call target out of range: arp_send
Backported from: 331ed1307b93d3ff77d248bdf2f7b79a20851457
--- ...-target-out-of-range-xtensa-ld-relaxation.patch | 79 ++++++++++++++++++++++ ...-target-out-of-range-xtensa-ld-relaxation.patch | 79 ++++++++++++++++++++++ ...-target-out-of-range-xtensa-ld-relaxation.patch | 79 ++++++++++++++++++++++ 3 files changed, 237 insertions(+) create mode 100644 package/binutils/2.22/904-Fix-call8-call-target-out-of-range-xtensa-ld-relaxation.patch create mode 100644 package/binutils/2.23.2/904-Fix-call8-call-target-out-of-range-xtensa-ld-relaxation.patch create mode 100644 package/binutils/2.24/904-Fix-call8-call-target-out-of-range-xtensa-ld-relaxation.patch
package/binutils/2.22/904-Fix-call8-call-target-out-of-range-xtensa-ld-relaxation.patch new file +79 -0
@@ -0,0 +1,79 @@ +From 7fc39194f8fb48914c995f8ec3826d50086f1ec0 Mon Sep 17 00:00:00 2001 +From: Sterling Augustine <[email protected]> +Date: Tue, 25 Jan 2011 13:59:13 -0800 +Subject: [PATCH] Fix 'call8: call target out of range' xtensa ld relaxation + bug + +During link-time relaxation distance between cross-section call site and +its target may grow, producing 'call target out of range' error for +relaxed calls. Be more conservative when calculating whether or not a +callx can be converted to a straight call. + +2014-09-23 Sterling Augustine <[email protected]> + +bfd/ + * elf32-xtensa.c (is_resolvable_asm_expansion): for cross-section + call relaxation use furthermost addresses where call source and + destination can be to check whether it's in the range of a direct + call. + +Signed-off-by: Max Filippov <[email protected]> +--- + bfd/elf32-xtensa.c | 41 +++++++++++++++++++++++++++++++++++++---- + 1 file changed, 37 insertions(+), 4 deletions(-) + +diff --git a/bfd/elf32-xtensa.c b/bfd/elf32-xtensa.c +index 09862e3..e32496a 100644 +--- a/bfd/elf32-xtensa.c ++++ b/bfd/elf32-xtensa.c +@@ -7124,10 +7124,43 @@ is_resolvable_asm_expansion (bfd *abfd, + || is_reloc_sym_weak (abfd, irel))) + return FALSE; + +- self_address = (sec->output_section->vma +- + sec->output_offset + irel->r_offset + 3); +- dest_address = (target_sec->output_section->vma +- + target_sec->output_offset + target_offset); ++ if (target_sec->output_section != sec->output_section) ++ { ++ /* If the two sections are sufficiently far away that relaxation ++ might take the call out of range, we can't simplify. For ++ example, a positive displacement call into another memory ++ could get moved to a lower address due to literal removal, ++ but the destination won't move, and so the displacment might ++ get larger. ++ ++ If the displacement is negative, assume the destination could ++ move as far back as the start of the output section. The ++ self_address will be at least as far into the output section ++ as it is prior to relaxation. ++ ++ If the displacement is postive, assume the destination will be in ++ it's pre-relaxed location (because relaxation only makes sections ++ smaller). The self_address could go all the way to the beginning ++ of the output section. */ ++ ++ dest_address = target_sec->output_section->vma; ++ self_address = sec->output_section->vma; ++ ++ if (sec->output_section->vma > target_sec->output_section->vma) ++ self_address += sec->output_offset + irel->r_offset + 3; ++ else ++ dest_address += bfd_get_section_limit (abfd, target_sec->output_section); ++ /* Call targets should be four-byte aligned. */ ++ dest_address = (dest_address + 3) & ~3; ++ } ++ else ++ { ++ ++ self_address = (sec->output_section->vma ++ + sec->output_offset + irel->r_offset + 3); ++ dest_address = (target_sec->output_section->vma ++ + target_sec->output_offset + target_offset); ++ } + + *is_reachable_p = pcrel_reloc_fits (direct_call_opcode, 0, + self_address, dest_address); +-- +1.8.1.4 +
package/binutils/2.23.2/904-Fix-call8-call-target-out-of-range-xtensa-ld-relaxation.patch new file +79 -0
79 lines not on this page · raw message
package/binutils/2.24/904-Fix-call8-call-target-out-of-range-xtensa-ld-relaxation.patch new file +79 -0
79 lines not on this page · raw message
Signature · 1 line
1.8.1.4
PATCH 1/1 binutils: fix 'call8: call target out of range' xtensa ld bug
Dear Max Filippov,
Quoted 18 lines · Max Filippov
This fixes the following linux kernel build errors:
LD
init/built-in.o
net/built-in.o: In function `raw_proc_exit':
(.init.text+0xe29): dangerous relocation:
call8: call target out of range:udp_proc_register
net/built-in.o: In function `udp_table_init':
(.init.text+0xf09): dangerous relocation:
call8: call target out of range:udp_proc_register
net/built-in.o: In function `inet_init':
af_inet.c:(.init.text+0x142e): dangerous relocation:
call8: call target out of range:udp4_proc_exit
net/built-in.o: In function `ip_auto_config':
ipconfig.c:(.init.text+0x28aa): dangerous relocation:
call8: call target out of range:arp_sendBackported from:
331ed1307b93d3ff77d248bdf2f7b79a20851457Signed-off-by Max Filippov <[email protected]>
Quoted 8 lines
--- ...-target-out-of-range-xtensa-ld-relaxation.patch | 79 ++++++++++++++++++++++ ...-target-out-of-range-xtensa-ld-relaxation.patch | 79 ++++++++++++++++++++++ ...-target-out-of-range-xtensa-ld-relaxation.patch | 79 ++++++++++++++++++++++ 3 files changed, 237 insertions(+) create mode 100644 package/binutils/2.22/904-Fix-call8-call-target-out-of-range-xtensa-ld-relaxation.patch create mode 100644 package/binutils/2.23.2/904-Fix-call8-call-target-out-of-range-xtensa-ld-relaxation.patch create mode 100644 package/binutils/2.24/904-Fix-call8-call-target-out-of-range-xtensa-ld-relaxation.patch
Thanks, patch applied. I have no idea what it does, but since it's an upstream backport, and it touches only Xtensa stuff, I'm fine :)
Thanks,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com