Skip to contentSkip to conversation

Using hierarchy irqdomian to implement MTK intpol.

RFC PATCH In review Joe.C 5 participants 8 messages Sep 24, 2014 – Sep 25, 2014

Subsystems (6)
lore
Share & tools
lore

Joe.C

author
#0 lore raw

RFC PATCH 1/1 Using hierarchy irqdomian to implement MTK intpol.

From: "Joe.C" <[email protected]>

Here's the first draft of using hierarchy irqdomain to implement MTK intpol support. I have tested it and intpol works fine. Before continue, I'd like to get your comments. This is based on Jiang's hierarchy irqdomian [1] and my mediatek SoC basic support [2].

Simplified block diagram for interrupt:

    ---------      ---------
 ---| CIRQ  |------|ARM GIC|
 ---|       |------|       |
 ---|       |------|       |
 ---|       |------|       |
 ---|       |------|       |
    ---------      ---------

In device tree, interrupt-parent for other devices is cirq, child of gic. This describe HW better and allow device to specify polarity as it is sent by the device. I'm using interrupt-parent to specify irq domain parent in cirq now. Maybe adding another name like 'interrupt-domain-parent' will be better.

Currently only set_type is implement in CIRQ, but I think this could extended to cover all function gic_arch_extn provided.

In order to use hierarchy irq domain, gic can't use legacy irq domain anymore. If arm,hierarchy-irq-domain property is specified, GIC will work in hierarchy way and all interrupt must be set by device tree.

One thing worth mention is arg in irq_domain_alloc_irqs. On x86, msi is using struct irq_alloc_info, to pass data between irq domain. In irq_create_of_mapping(), of_phandle_args is used. All allocs in irq_domain chain will need to use same interrupt-cells formats.

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-September/286542.html
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-September/284553.html

---
 arch/arm/boot/dts/mt8135.dtsi     |  14 +++-
 drivers/irqchip/Makefile          |   1 +
 drivers/irqchip/irq-gic.c         |  53 +++++++++++--
 drivers/irqchip/irq-mt65xx-cirq.c | 158 ++++++++++++++++++++++++++++++++++++++
 include/linux/irq.h               |   5 ++
 kernel/irq/chip.c                 |  28 +++++++
 kernel/irq/irqdomain.c            |  14 ++--
 7 files changed, 256 insertions(+), 17 deletions(-)
 create mode 100644 drivers/irqchip/irq-mt65xx-cirq.c
arch/arm/boot/dts/mt8135.dtsi +12 -2
index 90a56ad..e19ab1a 100644
@@ -18,7 +18,7 @@
 
 / {
 	compatible = "mediatek,mt8135";
-	interrupt-parent = <&gic>;
+	interrupt-parent = <&cirq>;
 
 	cpu-map {
 		cluster0 {
@@ -97,15 +97,25 @@
 		timer: timer at 10008000 {
 			compatible = "mediatek,mt8135-timer", "mediatek,mt6577-timer";
 			reg = <0 0x10008000 0 0x80>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&system_clk>, <&rtc_clk>;
 			clock-names = "system-clk", "rtc-clk";
 		};
 
+		cirq: interrupt-controller at 10200030 {
+			compatible = "mediatek,mt8135-cirq", "mediatek,mt6577-cirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200030 0 0x1c>;
+		};
+
 		gic: interrupt-controller at 10211000 {
 			compatible = "arm,cortex-a15-gic";
 			interrupt-controller;
 			#interrupt-cells = <3>;
+			arm,hierarchy-irq-domain;
+			interrupt-parent = <&gic>;
 			reg = <0 0x10211000 0 0x1000>,
 			      <0 0x10212000 0 0x1000>,
 			      <0 0x10214000 0 0x2000>,
drivers/irqchip/Makefile +1 -0
index 73052ba..0b34675 100644
@@ -34,3 +34,4 @@ obj-$(CONFIG_XTENSA)			+= irq-xtensa-pic.o
 obj-$(CONFIG_XTENSA_MX)			+= irq-xtensa-mx.o
 obj-$(CONFIG_IRQ_CROSSBAR)		+= irq-crossbar.o
 obj-$(CONFIG_BRCMSTB_L2_IRQ)		+= irq-brcmstb-l2.o
+obj-$(CONFIG_ARCH_MEDIATEK)		+= irq-mt65xx-cirq.o
drivers/irqchip/irq-gic.c +45 -8

88 lines not on this page · raw message

drivers/irqchip/irq-mt65xx-cirq.c new file +158 -0

158 lines not on this page · raw message

include/linux/irq.h +5 -0
index bfa027f..a877b88 100644
@@ -435,6 +435,11 @@ extern void handle_nested_irq(unsigned int irq);
 
 #ifdef	CONFIG_IRQ_DOMAIN_HIERARCHY
 extern void irq_chip_ack_parent(struct irq_data *data);
+extern void irq_chip_mask_parent(struct irq_data *data);
+extern void irq_chip_unmask_parent(struct irq_data *data);
+extern void irq_chip_eoi_parent(struct irq_data *data);
+extern int irq_chip_set_affinity_parent(struct irq_data *data,
+				const struct cpumask *dest, bool force);
 extern int irq_chip_retrigger_hierarchy(struct irq_data *data);
 #endif
 
kernel/irq/chip.c +28 -0
index b8ee27e..da3042b 100644
@@ -830,6 +830,34 @@ void irq_chip_ack_parent(struct irq_data *data)
 		data->chip->irq_ack(data);
 }
 
+void irq_chip_mask_parent(struct irq_data *data)
+{
+	data = data->parent_data;
+	data->chip->irq_mask(data);
+}
+
+void irq_chip_unmask_parent(struct irq_data *data)
+{
+	data = data->parent_data;
+	data->chip->irq_unmask(data);
+}
+
+void irq_chip_eoi_parent(struct irq_data *data)
+{
+	data = data->parent_data;
+	data->chip->irq_eoi(data);
+}
+
+int irq_chip_set_affinity_parent(struct irq_data *data,
+				 const struct cpumask *dest, bool force)
+{
+	data = data->parent_data;
+	if (data->chip->irq_set_affinity)
+		return data->chip->irq_set_affinity(data, dest, force);
+
+	return -ENOSYS;
+}
+
 int irq_chip_retrigger_hierarchy(struct irq_data *data)
 {
 	for (data = data->parent_data; data; data = data->parent_data)
kernel/irq/irqdomain.c +7 -7
index e285f3a..01e852b 100644
@@ -467,7 +467,7 @@ unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data)
 	struct irq_domain *domain;
 	irq_hw_number_t hwirq;
 	unsigned int type = IRQ_TYPE_NONE;
-	unsigned int virq;
+	int virq;
 
 	domain = irq_data->np ? irq_find_host(irq_data->np) : irq_default_domain;
 	if (!domain) {
@@ -493,8 +493,8 @@ unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data)
 	else
 #endif
 		virq = irq_create_mapping(domain, hwirq);
-	if (!virq)
-		return virq;
+	if (virq <= 0)
+		return 0;
 
 	/* Set type if specified and different than the current one */
 	if (type != IRQ_TYPE_NONE &&
@@ -716,20 +716,20 @@ const struct irq_domain_ops irq_domain_simple_ops = {
 };
 EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
 
-static int irq_domain_alloc_descs(int virq, unsigned int nr_irqs,
+static int irq_domain_alloc_descs(int virq, unsigned int cnt,
 				  irq_hw_number_t hwirq, int node)
 {
 	unsigned int hint;
 
 	if (virq >= 0) {
-		virq = irq_alloc_descs(virq, virq, nr_irqs, node);
+		virq = irq_alloc_descs(virq, virq, cnt, node);
 	} else {
 		hint = hwirq % nr_irqs;
 		if (hint == 0)
 			hint++;
-		virq = irq_alloc_descs_from(hint, nr_irqs, node);
+		virq = irq_alloc_descs_from(hint, cnt, node);
 		if (virq <= 0 && hint > 1)
-			virq = irq_alloc_descs_from(1, nr_irqs, node);
+			virq = irq_alloc_descs_from(1, cnt, node);
 	}
 
 	return virq;
Signature · 1 line
1.8.1.1.dirty
author
#1 lore raw

RFC PATCH 1/1 Using hierarchy irqdomian to implement MTK intpol.

Jiang,

Please consider merge the following 2 changes into your next round.

Quoted 14 lines · Joe.C
kernel/irq/irqdomain.c +1 -1
index e285f3a..01e852b 100644
@@ -467,7 +467,7 @@ unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data)
 	struct irq_domain *domain;
 	irq_hw_number_t hwirq;
 	unsigned int type = IRQ_TYPE_NONE;
-	unsigned int virq;
+	int virq;
 
 	domain = irq_data->np ? irq_find_host(irq_data->np) : irq_default_domain;
 	if (!domain) {

kernel/irq/irqdomain.c unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data) · line 500

Quoted 10 lines
kernel/irq/irqdomain.c +2 -2
@@ -493,8 +493,8 @@ unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data)
 	else
 #endif
 		virq = irq_create_mapping(domain, hwirq);
-	if (!virq)
-		return virq;
+	if (virq <= 0)
+		return 0;
 
 	/* Set type if specified and different than the current one */
 	if (type != IRQ_TYPE_NONE &&

irq_of_parse_and_map()/of_irq_to_resource() expect irq_create_of_mapping() to return 0 when fail. Return error code will cause of_irq_to_resource crash.

Quoted 15 lines
kernel/irq/irqdomain.c +2 -2
@@ -716,20 +716,20 @@ const struct irq_domain_ops irq_domain_simple_ops = {
 };
 EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
 
-static int irq_domain_alloc_descs(int virq, unsigned int nr_irqs,
+static int irq_domain_alloc_descs(int virq, unsigned int cnt,
 				  irq_hw_number_t hwirq, int node)
 {
 	unsigned int hint;
 
 	if (virq >= 0) {
-		virq = irq_alloc_descs(virq, virq, nr_irqs, node);
+		virq = irq_alloc_descs(virq, virq, cnt, node);
 	} else {
 		hint = hwirq % nr_irqs;

kernel/irq/irqdomain.c const struct irq_domain_ops irq_domain_simple_ops = { · line 735

Quoted 10 lines
kernel/irq/irqdomain.c +2 -2
 		if (hint == 0)
 			hint++;
-		virq = irq_alloc_descs_from(hint, nr_irqs, node);
+		virq = irq_alloc_descs_from(hint, cnt, node);
 		if (virq <= 0 && hint > 1)
-			virq = irq_alloc_descs_from(1, nr_irqs, node);
+			virq = irq_alloc_descs_from(1, cnt, node);
 	}
 
 	return virq;

This come from irq_create_mapping(), the original code is using global nr_irqs. Change to match original behavior.

Joe.C

#2 lore raw

Hi Joe,
Thanks, I will merge them into my next version.
Regards!
Gerry

Quoted 68 lines · Joe.C

Jiang,

Please consider merge the following 2 changes into your next round.

Quoted 14 lines · Joe.C
kernel/irq/irqdomain.c +1 -1
index e285f3a..01e852b 100644
@@ -467,7 +467,7 @@ unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data)
 	struct irq_domain *domain;
 	irq_hw_number_t hwirq;
 	unsigned int type = IRQ_TYPE_NONE;
-	unsigned int virq;
+	int virq;
 
 	domain = irq_data->np ? irq_find_host(irq_data->np) : irq_default_domain;
 	if (!domain) {

kernel/irq/irqdomain.c unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data) · line 500

Quoted 10 lines
kernel/irq/irqdomain.c +2 -2
@@ -493,8 +493,8 @@ unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data)
 	else
 #endif
 		virq = irq_create_mapping(domain, hwirq);
-	if (!virq)
-		return virq;
+	if (virq <= 0)
+		return 0;
 
 	/* Set type if specified and different than the current one */
 	if (type != IRQ_TYPE_NONE &&

irq_of_parse_and_map()/of_irq_to_resource() expect irq_create_of_mapping() to return 0 when fail. Return error code will cause of_irq_to_resource crash.

Quoted 15 lines
kernel/irq/irqdomain.c +2 -2
@@ -716,20 +716,20 @@ const struct irq_domain_ops irq_domain_simple_ops = {
 };
 EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
 
-static int irq_domain_alloc_descs(int virq, unsigned int nr_irqs,
+static int irq_domain_alloc_descs(int virq, unsigned int cnt,
 				  irq_hw_number_t hwirq, int node)
 {
 	unsigned int hint;
 
 	if (virq >= 0) {
-		virq = irq_alloc_descs(virq, virq, nr_irqs, node);
+		virq = irq_alloc_descs(virq, virq, cnt, node);
 	} else {
 		hint = hwirq % nr_irqs;

kernel/irq/irqdomain.c const struct irq_domain_ops irq_domain_simple_ops = { · line 735

Quoted 10 lines
kernel/irq/irqdomain.c +2 -2
 		if (hint == 0)
 			hint++;
-		virq = irq_alloc_descs_from(hint, nr_irqs, node);
+		virq = irq_alloc_descs_from(hint, cnt, node);
 		if (virq <= 0 && hint > 1)
-			virq = irq_alloc_descs_from(1, nr_irqs, node);
+			virq = irq_alloc_descs_from(1, cnt, node);
 	}
 
 	return virq;

This come from irq_create_mapping(), the original code is using global nr_irqs. Change to match original behavior.

Joe.C

#3 lore raw
Quoted 10 lines · Jiang Liu

Hi Joe,
Thanks, I will merge them into my next version.
Regards!
Gerry

Quoted 4 lines · Joe.C

Jiang,

Please consider merge the following 2 changes into your next round.

ummm. I'm confused. I'll admit I'm a bit liquored up atm, but it looks like "Joe C." posted a patch 'From: Joe C.', and 'Signed-off-by: Joe C.'. _Then_, Joe C. replied to himself and asked someone *else* to merge the below changes into the originally posted patch. The real kicker is that someone responded and said they would do it. (?!)

Please tell me the scotch is making this look more fucked up than it really is...

Also, if Joe.C could please fix his mailer and git config to produce a complete, correct name, that would be appreciated.

thx,

Jason.

Quoted 63 lines
Quoted 63 lines · Joe.C
Quoted 14 lines
kernel/irq/irqdomain.c +1 -1
index e285f3a..01e852b 100644
@@ -467,7 +467,7 @@ unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data)
 	struct irq_domain *domain;
 	irq_hw_number_t hwirq;
 	unsigned int type = IRQ_TYPE_NONE;
-	unsigned int virq;
+	int virq;
 
 	domain = irq_data->np ? irq_find_host(irq_data->np) : irq_default_domain;
 	if (!domain) {

kernel/irq/irqdomain.c unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data) · line 500

Quoted 10 lines
kernel/irq/irqdomain.c +2 -2
@@ -493,8 +493,8 @@ unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data)
 	else
 #endif
 		virq = irq_create_mapping(domain, hwirq);
-	if (!virq)
-		return virq;
+	if (virq <= 0)
+		return 0;
 
 	/* Set type if specified and different than the current one */
 	if (type != IRQ_TYPE_NONE &&

irq_of_parse_and_map()/of_irq_to_resource() expect irq_create_of_mapping() to return 0 when fail. Return error code will cause of_irq_to_resource crash.

Quoted 15 lines
kernel/irq/irqdomain.c +2 -2
@@ -716,20 +716,20 @@ const struct irq_domain_ops irq_domain_simple_ops = {
 };
 EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
 
-static int irq_domain_alloc_descs(int virq, unsigned int nr_irqs,
+static int irq_domain_alloc_descs(int virq, unsigned int cnt,
 				  irq_hw_number_t hwirq, int node)
 {
 	unsigned int hint;
 
 	if (virq >= 0) {
-		virq = irq_alloc_descs(virq, virq, nr_irqs, node);
+		virq = irq_alloc_descs(virq, virq, cnt, node);
 	} else {
 		hint = hwirq % nr_irqs;

kernel/irq/irqdomain.c const struct irq_domain_ops irq_domain_simple_ops = { · line 735

Quoted 10 lines
kernel/irq/irqdomain.c +2 -2
 		if (hint == 0)
 			hint++;
-		virq = irq_alloc_descs_from(hint, nr_irqs, node);
+		virq = irq_alloc_descs_from(hint, cnt, node);
 		if (virq <= 0 && hint > 1)
-			virq = irq_alloc_descs_from(1, nr_irqs, node);
+			virq = irq_alloc_descs_from(1, cnt, node);
 	}
 
 	return virq;

This come from irq_create_mapping(), the original code is using global nr_irqs. Change to match original behavior.

Joe.C

#4 lore raw
Quoted 18 lines · Jason Cooper
Quoted 10 lines · Jiang Liu

Hi Joe,
Thanks, I will merge them into my next version.
Regards!
Gerry

Quoted 4 lines · Joe.C

Jiang,

Please consider merge the following 2 changes into your next round.

ummm. I'm confused. I'll admit I'm a bit liquored up atm, but it looks like "Joe C." posted a patch 'From: Joe C.', and 'Signed-off-by: Joe C.'. _Then_, Joe C. replied to himself and asked someone *else* to merge the below changes into the originally posted patch. The real kicker is that someone responded and said they would do it. (?!)

Quoted 5 lines

Please tell me the scotch is making this look more fucked up than it really is...

Also, if Joe.C could please fix his mailer and git config to produce a complete, correct name, that would be appreciated.

Hi Jason,
Sorry for the confusion:)
We are trying to extend irqdomain to support hierarchy
irqdomain. The code was originally developed on x86 only, and it's still in RFC stage. When Joe trying to use hierarchy irqdomain interfaces on ARM, he found some bugs, so hope that I could take those bugfixes in next version.
Regards!
Gerry

Quoted 68 lines

thx,

Jason.

Quoted 63 lines
Quoted 63 lines · Joe.C
Quoted 14 lines
kernel/irq/irqdomain.c +1 -1
index e285f3a..01e852b 100644
@@ -467,7 +467,7 @@ unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data)
 	struct irq_domain *domain;
 	irq_hw_number_t hwirq;
 	unsigned int type = IRQ_TYPE_NONE;
-	unsigned int virq;
+	int virq;
 
 	domain = irq_data->np ? irq_find_host(irq_data->np) : irq_default_domain;
 	if (!domain) {

kernel/irq/irqdomain.c unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data) · line 500

Quoted 10 lines
kernel/irq/irqdomain.c +2 -2
@@ -493,8 +493,8 @@ unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data)
 	else
 #endif
 		virq = irq_create_mapping(domain, hwirq);
-	if (!virq)
-		return virq;
+	if (virq <= 0)
+		return 0;
 
 	/* Set type if specified and different than the current one */
 	if (type != IRQ_TYPE_NONE &&

irq_of_parse_and_map()/of_irq_to_resource() expect irq_create_of_mapping() to return 0 when fail. Return error code will cause of_irq_to_resource crash.

Quoted 15 lines
kernel/irq/irqdomain.c +2 -2
@@ -716,20 +716,20 @@ const struct irq_domain_ops irq_domain_simple_ops = {
 };
 EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
 
-static int irq_domain_alloc_descs(int virq, unsigned int nr_irqs,
+static int irq_domain_alloc_descs(int virq, unsigned int cnt,
 				  irq_hw_number_t hwirq, int node)
 {
 	unsigned int hint;
 
 	if (virq >= 0) {
-		virq = irq_alloc_descs(virq, virq, nr_irqs, node);
+		virq = irq_alloc_descs(virq, virq, cnt, node);
 	} else {
 		hint = hwirq % nr_irqs;

kernel/irq/irqdomain.c const struct irq_domain_ops irq_domain_simple_ops = { · line 735

Quoted 10 lines
kernel/irq/irqdomain.c +2 -2
 		if (hint == 0)
 			hint++;
-		virq = irq_alloc_descs_from(hint, nr_irqs, node);
+		virq = irq_alloc_descs_from(hint, cnt, node);
 		if (virq <= 0 && hint > 1)
-			virq = irq_alloc_descs_from(1, nr_irqs, node);
+			virq = irq_alloc_descs_from(1, cnt, node);
 	}
 
 	return virq;

This come from irq_create_mapping(), the original code is using global nr_irqs. Change to match original behavior.

Joe.C

#5 lore raw
In reply to Joe.C
Quoted 105 lines · Joe.C

From: "Joe.C" <[email protected]>

Here's the first draft of using hierarchy irqdomain to implement MTK intpol support. I have tested it and intpol works fine. Before continue, I'd like to get your comments. This is based on Jiang's hierarchy irqdomian [1] and my mediatek SoC basic support [2].

Simplified block diagram for interrupt:

    ---------      ---------
 ---| CIRQ  |------|ARM GIC|
 ---|       |------|       |
 ---|       |------|       |
 ---|       |------|       |
 ---|       |------|       |
    ---------      ---------

In device tree, interrupt-parent for other devices is cirq, child of gic. This describe HW better and allow device to specify polarity as it is sent by the device. I'm using interrupt-parent to specify irq domain parent in cirq now. Maybe adding another name like 'interrupt-domain-parent' will be better.

Currently only set_type is implement in CIRQ, but I think this could extended to cover all function gic_arch_extn provided.

In order to use hierarchy irq domain, gic can't use legacy irq domain anymore. If arm,hierarchy-irq-domain property is specified, GIC will work in hierarchy way and all interrupt must be set by device tree.

One thing worth mention is arg in irq_domain_alloc_irqs. On x86, msi is using struct irq_alloc_info, to pass data between irq domain. In irq_create_of_mapping(), of_phandle_args is used. All allocs in irq_domain chain will need to use same interrupt-cells formats.

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-September/286542.html
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-September/284553.html

---
 arch/arm/boot/dts/mt8135.dtsi     |  14 +++-
 drivers/irqchip/Makefile          |   1 +
 drivers/irqchip/irq-gic.c         |  53 +++++++++++--
 drivers/irqchip/irq-mt65xx-cirq.c | 158 ++++++++++++++++++++++++++++++++++++++
 include/linux/irq.h               |   5 ++
 kernel/irq/chip.c                 |  28 +++++++
 kernel/irq/irqdomain.c            |  14 ++--
 7 files changed, 256 insertions(+), 17 deletions(-)
 create mode 100644 drivers/irqchip/irq-mt65xx-cirq.c
arch/arm/boot/dts/mt8135.dtsi +12 -2
index 90a56ad..e19ab1a 100644
@@ -18,7 +18,7 @@
 
 / {
 	compatible = "mediatek,mt8135";
-	interrupt-parent = <&gic>;
+	interrupt-parent = <&cirq>;
 
 	cpu-map {
 		cluster0 {
@@ -97,15 +97,25 @@
 		timer: timer at 10008000 {
 			compatible = "mediatek,mt8135-timer", "mediatek,mt6577-timer";
 			reg = <0 0x10008000 0 0x80>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&system_clk>, <&rtc_clk>;
 			clock-names = "system-clk", "rtc-clk";
 		};
 
+		cirq: interrupt-controller at 10200030 {
+			compatible = "mediatek,mt8135-cirq", "mediatek,mt6577-cirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200030 0 0x1c>;
+		};
+
 		gic: interrupt-controller at 10211000 {
 			compatible = "arm,cortex-a15-gic";
 			interrupt-controller;
 			#interrupt-cells = <3>;
+			arm,hierarchy-irq-domain;
+			interrupt-parent = <&gic>;
 			reg = <0 0x10211000 0 0x1000>,
 			      <0 0x10212000 0 0x1000>,
 			      <0 0x10214000 0 0x2000>,
drivers/irqchip/Makefile +1 -0
index 73052ba..0b34675 100644
@@ -34,3 +34,4 @@ obj-$(CONFIG_XTENSA)			+= irq-xtensa-pic.o
 obj-$(CONFIG_XTENSA_MX)			+= irq-xtensa-mx.o
 obj-$(CONFIG_IRQ_CROSSBAR)		+= irq-crossbar.o
 obj-$(CONFIG_BRCMSTB_L2_IRQ)		+= irq-brcmstb-l2.o
+obj-$(CONFIG_ARCH_MEDIATEK)		+= irq-mt65xx-cirq.o
drivers/irqchip/irq-gic.c +0 -0
index 4b959e6..d66d707 100644

drivers/irqchip/irq-gic.c void __init gic_init_physaddr(struct device_node *node) · line 770

Quoted 4 lines
drivers/irqchip/irq-gic.c +1 -0
@@ -767,22 +767,50 @@ void __init gic_init_physaddr(struct device_node *node)
 static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
 				irq_hw_number_t hw)
 {
+	irq_domain_set_hwirq_and_chip(d, irq, hw, &gic_chip, d->host_data);

Hi Joe,
Seems you missed the change to enable Kconfig option
CONFIG_IRQ_DOMAIN_HIERARCHY. If CONFIG_IRQ_DOMAIN_HIERARCHY may be off under certain conditions, above code may cause building failure.
Regards!
Gerry

Quoted 192 lines
drivers/irqchip/irq-gic.c +44 -8
 	if (hw < 32) {
 		irq_set_percpu_devid(irq);
-		irq_set_chip_and_handler(irq, &gic_chip,
-					 handle_percpu_devid_irq);
+		irq_set_handler(irq, handle_percpu_devid_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN);
 	} else {
-		irq_set_chip_and_handler(irq, &gic_chip,
-					 handle_fasteoi_irq);
+		irq_set_handler(irq, handle_fasteoi_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 
 		gic_routable_irq_domain_ops->map(d, irq, hw);
 	}
-	irq_set_chip_data(irq, d->host_data);
 	return 0;
 }
 
+static int gic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
+				unsigned int nr_irqs, void *arg)
+{
+	int i, ret;
+	irq_hw_number_t hwirq;
+	unsigned int type = IRQ_TYPE_NONE;
+	struct of_phandle_args *irq_data = arg;
+
+	ret = domain->ops->xlate(domain, irq_data->np, irq_data->args,
+				 irq_data->args_count, &hwirq, &type);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < nr_irqs; i++)
+		gic_irq_domain_map(domain, virq+i, hwirq+i);
+
+	return 0;
+}
+
+static void gic_irq_domain_free(struct irq_domain *domain, unsigned int virq,
+				unsigned int nr_irqs)
+{
+	int i;
+
+	for (i = 0; i < nr_irqs; i++) {
+		irq_set_handler(virq + i, NULL);
+		irq_domain_set_hwirq_and_chip(domain, virq + i, 0, NULL, NULL);
+	}
+}
+
 static void gic_irq_domain_unmap(struct irq_domain *d, unsigned int irq)
 {
 	gic_routable_irq_domain_ops->unmap(d, irq);
@@ -795,8 +823,6 @@ static int gic_irq_domain_xlate(struct irq_domain *d,
 {
 	unsigned long ret = 0;
 
-	if (d->of_node != controller)
-		return -EINVAL;
 	if (intsize < 3)
 		return -EINVAL;
 
@@ -839,6 +865,14 @@ static struct notifier_block gic_cpu_notifier = {
 };
 #endif
 
+static const struct irq_domain_ops gic_irq_domain_hierarchy_ops = {
+	.alloc = gic_irq_domain_alloc,
+	.free = gic_irq_domain_free,
+	.map = gic_irq_domain_map,
+	.unmap = gic_irq_domain_unmap,
+	.xlate = gic_irq_domain_xlate,
+};
+
 static const struct irq_domain_ops gic_irq_domain_ops = {
 	.map = gic_irq_domain_map,
 	.unmap = gic_irq_domain_unmap,
@@ -952,7 +986,10 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
 
 	gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */
 
-	if (of_property_read_u32(node, "arm,routable-irqs",
+	if (of_find_property(node, "arm,hierarchy-irq-domain", NULL))
+		gic->domain = irq_domain_add_linear(node, gic_irqs,
+					&gic_irq_domain_hierarchy_ops, gic);
+	else if (of_property_read_u32(node, "arm,routable-irqs",
 				 &nr_routable_irqs)) {
 		irq_base = irq_alloc_descs(irq_start, 16, gic_irqs,
 					   numa_node_id());
drivers/irqchip/irq-mt65xx-cirq.c new file +99 -0
new file mode 100644
index 0000000..1243a7f
@@ -0,0 +1,158 @@
+
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include "irqchip.h"
+
+#define MT6577_SYS_CIRQ_NUM	(168)
+
+struct mt_cirq_chip_data {
+	spinlock_t lock;
+	void __iomem *intpol_base;
+};
+
+
+static int mt_cirq_set_type(struct irq_data *data, unsigned int type)
+{
+	irq_hw_number_t hwirq = data->hwirq;
+	struct mt_cirq_chip_data *chip_data = data->chip_data;
+	u32 offset, reg_index, value;
+	unsigned long flags;
+	int ret;
+
+	offset = hwirq & 0x1f;
+	reg_index = hwirq >> 5;
+
+	spin_lock_irqsave(&chip_data->lock, flags);
+	value = readl_relaxed(chip_data->intpol_base + reg_index * 4);
+	if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_EDGE_FALLING) {
+		type = (type == IRQ_TYPE_LEVEL_LOW) ?
+			IRQ_TYPE_LEVEL_HIGH : IRQ_TYPE_EDGE_RISING;
+		value |= (1 << offset);
+	} else
+		value &= ~(1 << offset);
+	writel(value, chip_data->intpol_base + reg_index * 4);
+
+	data = data->parent_data;
+	ret = data->chip->irq_set_type(data, type);
+	spin_unlock_irqrestore(&chip_data->lock, flags);
+	return ret;
+}
+
+static struct irq_chip mt_cirq_chip = {
+	.name			= "MT_CIRQ",
+	.irq_mask		= irq_chip_mask_parent,
+	.irq_unmask		= irq_chip_unmask_parent,
+	.irq_eoi		= irq_chip_eoi_parent,
+	.irq_set_type		= mt_cirq_set_type,
+	.irq_retrigger		= irq_chip_retrigger_hierarchy,
+	.irq_set_affinity	= irq_chip_set_affinity_parent,
+};
+
+static int mt_cirq_domain_alloc(struct irq_domain *domain, unsigned int virq,
+				unsigned int nr_irqs, void *arg)
+{
+	int i, ret;
+	irq_hw_number_t hwirq;
+	struct of_phandle_args *irq_data = arg;
+
+	if (irq_data->args_count != 3)
+		return -EINVAL;
+
+	hwirq = irq_data->args[1];
+	if (irq_find_mapping(domain, hwirq) > 0)
+		return -EEXIST;
+
+	for (i = 0; i < nr_irqs; i++)
+		irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
+					      &mt_cirq_chip, domain->host_data);
+
+	ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void mt_cirq_domain_free(struct irq_domain *domain, unsigned int virq,
+				unsigned int nr_irqs)
+{
+	int i;
+
+	for (i = 0; i < nr_irqs; i++) {
+		irq_set_handler(virq + i, NULL);
+		irq_domain_set_hwirq_and_chip(domain, virq + i, 0, NULL, NULL);
+	}
+	irq_domain_free_irqs_parent(domain, virq, nr_irqs);
+}
+
+static int mt_cirq_domain_xlate(struct irq_domain *d,
+				struct device_node *controller,
+				const u32 *intspec, unsigned int intsize,
+				unsigned long *out_hwirq,
+				unsigned int *out_type)

drivers/irqchip/irq-mt65xx-cirq.c line 109

Quoted 10 lines
drivers/irqchip/irq-mt65xx-cirq.c new file +10 -0
+{
+	return d->parent->ops->xlate(d->parent, controller, intspec, intsize,
+					out_hwirq, out_type);
+}
+
+static struct irq_domain_ops cirq_domain_ops = {
+	.alloc = mt_cirq_domain_alloc,
+	.free = mt_cirq_domain_free,
+	.xlate = mt_cirq_domain_xlate,
+};

I'm trying to make change to irq_create_of_mapping() in next version, which will affect you patch in two aspects:
1) no need to implement mt_cirq_domain_xlate?
2?OF hierarchy irqdomain callbacks need to implement following logic:

        if (type != IRQ_TYPE_NONE &&
            type != irq_get_trigger_type(virq))
                irq_set_irq_type(virq, type);

Regards!
Gerry

Quoted 154 lines
drivers/irqchip/irq-mt65xx-cirq.c new file +49 -0
+
+static int __init mtk_cirq_of_init(struct device_node *node,
+				   struct device_node *parent)
+{
+	struct device_node *parent_node;
+	struct irq_domain *domain, *domain_parent = NULL;
+	struct mt_cirq_chip_data *chip_data;
+	int ret = 0;
+
+	parent_node = of_irq_find_parent(node);
+	if (parent_node) {
+		domain_parent = irq_find_host(parent_node);
+		of_node_put(parent_node);
+	}
+
+	if (!domain_parent) {
+		pr_err("mtk_cirq: interrupt-parent not found\n");
+		return -EINVAL;
+	}
+
+	chip_data = kzalloc(sizeof(*chip_data), GFP_KERNEL);
+	if (!chip_data)
+		return -ENOMEM;
+
+	chip_data->intpol_base = of_io_request_and_map(node, 0, "intpol");
+	if (!chip_data->intpol_base) {
+		pr_err("mtk_cirq: unable to map cirq register\n");
+		ret = -ENOMEM;
+		goto out_free;
+	}
+
+	domain = irq_domain_add_linear(node, MT6577_SYS_CIRQ_NUM,
+				&cirq_domain_ops, chip_data);
+	if (!domain) {
+		ret = -ENOMEM;
+		goto out_unmap;
+	}
+	domain->parent = domain_parent;
+	spin_lock_init(&chip_data->lock);
+
+	return 0;
+
+out_unmap:
+	iounmap(chip_data->intpol_base);
+out_free:
+	kfree(chip_data);
+	return ret;
+}
+IRQCHIP_DECLARE(mtk_cirq, "mediatek,mt6577-cirq", mtk_cirq_of_init);
include/linux/irq.h +5 -0
index bfa027f..a877b88 100644
@@ -435,6 +435,11 @@ extern void handle_nested_irq(unsigned int irq);
 
 #ifdef	CONFIG_IRQ_DOMAIN_HIERARCHY
 extern void irq_chip_ack_parent(struct irq_data *data);
+extern void irq_chip_mask_parent(struct irq_data *data);
+extern void irq_chip_unmask_parent(struct irq_data *data);
+extern void irq_chip_eoi_parent(struct irq_data *data);
+extern int irq_chip_set_affinity_parent(struct irq_data *data,
+				const struct cpumask *dest, bool force);
 extern int irq_chip_retrigger_hierarchy(struct irq_data *data);
 #endif
 
kernel/irq/chip.c +28 -0
index b8ee27e..da3042b 100644
@@ -830,6 +830,34 @@ void irq_chip_ack_parent(struct irq_data *data)
 		data->chip->irq_ack(data);
 }
 
+void irq_chip_mask_parent(struct irq_data *data)
+{
+	data = data->parent_data;
+	data->chip->irq_mask(data);
+}
+
+void irq_chip_unmask_parent(struct irq_data *data)
+{
+	data = data->parent_data;
+	data->chip->irq_unmask(data);
+}
+
+void irq_chip_eoi_parent(struct irq_data *data)
+{
+	data = data->parent_data;
+	data->chip->irq_eoi(data);
+}
+
+int irq_chip_set_affinity_parent(struct irq_data *data,
+				 const struct cpumask *dest, bool force)
+{
+	data = data->parent_data;
+	if (data->chip->irq_set_affinity)
+		return data->chip->irq_set_affinity(data, dest, force);
+
+	return -ENOSYS;
+}
+
 int irq_chip_retrigger_hierarchy(struct irq_data *data)
 {
 	for (data = data->parent_data; data; data = data->parent_data)
kernel/irq/irqdomain.c +7 -7
index e285f3a..01e852b 100644
@@ -467,7 +467,7 @@ unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data)
 	struct irq_domain *domain;
 	irq_hw_number_t hwirq;
 	unsigned int type = IRQ_TYPE_NONE;
-	unsigned int virq;
+	int virq;
 
 	domain = irq_data->np ? irq_find_host(irq_data->np) : irq_default_domain;
 	if (!domain) {
@@ -493,8 +493,8 @@ unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data)
 	else
 #endif
 		virq = irq_create_mapping(domain, hwirq);
-	if (!virq)
-		return virq;
+	if (virq <= 0)
+		return 0;
 
 	/* Set type if specified and different than the current one */
 	if (type != IRQ_TYPE_NONE &&
@@ -716,20 +716,20 @@ const struct irq_domain_ops irq_domain_simple_ops = {
 };
 EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
 
-static int irq_domain_alloc_descs(int virq, unsigned int nr_irqs,
+static int irq_domain_alloc_descs(int virq, unsigned int cnt,
 				  irq_hw_number_t hwirq, int node)
 {
 	unsigned int hint;
 
 	if (virq >= 0) {
-		virq = irq_alloc_descs(virq, virq, nr_irqs, node);
+		virq = irq_alloc_descs(virq, virq, cnt, node);
 	} else {
 		hint = hwirq % nr_irqs;
 		if (hint == 0)
 			hint++;
-		virq = irq_alloc_descs_from(hint, nr_irqs, node);
+		virq = irq_alloc_descs_from(hint, cnt, node);
 		if (virq <= 0 && hint > 1)
-			virq = irq_alloc_descs_from(1, nr_irqs, node);
+			virq = irq_alloc_descs_from(1, cnt, node);
 	}
 
 	return virq;
#6 lore raw
In reply to Joe.C
Quoted 17 lines · Joe.C

From: "Joe.C" <[email protected]>

Here's the first draft of using hierarchy irqdomain to implement MTK intpol support. I have tested it and intpol works fine. Before continue, I'd like to get your comments. This is based on Jiang's hierarchy irqdomian [1] and my mediatek SoC basic support [2].

Simplified block diagram for interrupt:

    ---------      ---------
 ---| CIRQ  |------|ARM GIC|
 ---|       |------|       |
 ---|       |------|       |
 ---|       |------|       |
 ---|       |------|       |
    ---------      ---------
Quoted 5 lines

In device tree, interrupt-parent for other devices is cirq, child of gic. This describe HW better and allow device to specify polarity as it is sent by the device. I'm using interrupt-parent to specify irq domain parent in cirq now. Maybe adding another name like 'interrupt-domain-parent' will be better.

I leave that to the DT folks.

Quoted 2 lines

Currently only set_type is implement in CIRQ, but I think this could extended to cover all function gic_arch_extn provided.

Right. Marc, can you have a look at this whether you can see how that might replace the rest of the arch_extn hackery?

At least the avoidance of the set_type mess looks pretty reasonable.

Quoted 8 lines

In order to use hierarchy irq domain, gic can't use legacy irq domain anymore. If arm,hierarchy-irq-domain property is specified, GIC will work in hierarchy way and all interrupt must be set by device tree.

One thing worth mention is arg in irq_domain_alloc_irqs. On x86, msi is using struct irq_alloc_info, to pass data between irq domain. In irq_create_of_mapping(), of_phandle_args is used. All allocs in irq_domain chain will need to use same interrupt-cells formats.

Right, but we leave that to the architecture implementation. It needs to be consistent within an architecture, so we should change the "void *arg" to a well defined type. For OF architectures this would be of_phandle_args, other architectures can define their own struct type which allows to transport data between the domains. That ensures compile time type checking.

Thanks,

tglx

#7 lore raw
Quoted 18 lines · Thomas Gleixner
Quoted 17 lines · Joe.C

From: "Joe.C" <[email protected]>

Here's the first draft of using hierarchy irqdomain to implement MTK intpol support. I have tested it and intpol works fine. Before continue, I'd like to get your comments. This is based on Jiang's hierarchy irqdomian [1] and my mediatek SoC basic support [2].

Simplified block diagram for interrupt:

    ---------      ---------
 ---| CIRQ  |------|ARM GIC|
 ---|       |------|       |
 ---|       |------|       |
 ---|       |------|       |
 ---|       |------|       |
    ---------      ---------
Quoted 7 lines
Quoted 5 lines

In device tree, interrupt-parent for other devices is cirq, child of gic. This describe HW better and allow device to specify polarity as it is sent by the device. I'm using interrupt-parent to specify irq domain parent in cirq now. Maybe adding another name like 'interrupt-domain-parent' will be better.

I leave that to the DT folks.

interrupt-parent really defines a domain already, I think using this is perfectly fine.

Arnd