Skip to contentSkip to conversation

mac-hwsim: don't leak memory on tx failure.

PATCH Applied [email protected] 2 participants 7 messages Sep 25, 2014 – Oct 9, 2014 Networking drivers (wireless)

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 mac-hwsim: don't leak memory on tx failure.

From: Ben Greear <[email protected]>

It seems previous code did not properly clean up memory if the packet could not be delivered to user-space.

---

I don't have a good way to test this, but hopefully it is correct.

 drivers/net/wireless/mac80211_hwsim.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/wireless/mac80211_hwsim.c +2 -1
index babbdc1..a74227d 100644
@@ -862,7 +862,7 @@ static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
 	if (skb_queue_len(&data->pending) >= MAX_QUEUE) {
 		/* Droping until WARN_QUEUE level */
 		while (skb_queue_len(&data->pending) >= WARN_QUEUE)
-			skb_dequeue(&data->pending);
+			ieee80211_free_txskb(hw, skb_dequeue(&data->pending));
 	}
 
 	skb = genlmsg_new(GENLMSG_DEFAULT_SIZE, GFP_ATOMIC);
@@ -921,6 +921,7 @@ static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
 
 nla_put_failure:
 	printk(KERN_DEBUG "mac80211_hwsim: error occurred in %s\n", __func__);
+	ieee80211_free_txskb(hw, my_skb);
 }
 
 static bool hwsim_chans_compat(struct ieee80211_channel *c1,
Signature · 1 line
1.7.11.7
#1 lore raw

PATCH 2/3 mac-hwsim: add ethtool stats support.

From: Ben Greear <[email protected]>

This gives a view into packet activity at the virtual radio level.

---
 drivers/net/wireless/mac80211_hwsim.c | 75 ++++++++++++++++++++++++++++++++++-
 1 file changed, 74 insertions(+), 1 deletion(-)
drivers/net/wireless/mac80211_hwsim.c +74 -1
index a74227d..ae90438 100644
@@ -447,6 +447,14 @@ struct mac80211_hwsim_data {
 	s64 bcn_delta;
 	/* absolute beacon transmission time. Used to cover up "tx" delay. */
 	u64 abs_bcn_ts;
+
+	/* Stats */
+	u64 tx_pkts;
+	u64 rx_pkts;
+	u64 tx_bytes;
+	u64 rx_bytes;
+	u64 tx_dropped;
+	u64 tx_failed;
 };
 
 
@@ -861,8 +869,10 @@ static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
 	/* If the queue contains MAX_QUEUE skb's drop some */
 	if (skb_queue_len(&data->pending) >= MAX_QUEUE) {
 		/* Droping until WARN_QUEUE level */
-		while (skb_queue_len(&data->pending) >= WARN_QUEUE)
+		while (skb_queue_len(&data->pending) >= WARN_QUEUE) {
 			ieee80211_free_txskb(hw, skb_dequeue(&data->pending));
+			data->tx_dropped++;
+		}
 	}
 
 	skb = genlmsg_new(GENLMSG_DEFAULT_SIZE, GFP_ATOMIC);
@@ -917,11 +927,14 @@ static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
 
 	/* Enqueue the packet */
 	skb_queue_tail(&data->pending, my_skb);
+	data->tx_pkts++;
+	data->tx_bytes += my_skb->len;
 	return;
 
 nla_put_failure:
 	printk(KERN_DEBUG "mac80211_hwsim: error occurred in %s\n", __func__);
 	ieee80211_free_txskb(hw, my_skb);
+	data->tx_failed++;
 }
 
 static bool hwsim_chans_compat(struct ieee80211_channel *c1,
@@ -1067,6 +1080,8 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw,
 		rx_status.mactime = now + data2->tsf_offset;
 
 		memcpy(IEEE80211_SKB_RXCB(nskb), &rx_status, sizeof(rx_status));
+		data2->rx_pkts++;
+		data2->rx_bytes += nskb->len;
 		ieee80211_rx_irqsafe(data2->hw, nskb);
 	}
 	spin_unlock(&hwsim_radio_lock);
@@ -1134,6 +1149,8 @@ static void mac80211_hwsim_tx(struct ieee80211_hw *hw,
 		return mac80211_hwsim_tx_frame_nl(hw, skb, _portid);
 
 	/* NO wmediumd detected, perfect medium simulation */
+	data->tx_pkts++;
+	data->tx_bytes += skb->len;
 	ack = mac80211_hwsim_tx_frame_no_nl(hw, skb, channel);
 
 	if (ack && skb->len >= 16) {
@@ -1917,6 +1934,57 @@ static void mac80211_hwsim_unassign_vif_chanctx(struct ieee80211_hw *hw,
 	hwsim_check_chanctx_magic(ctx);
 }
 
+static const char mac80211_hwsim_gstrings_stats[][ETH_GSTRING_LEN] = {
+	"tx_pkts_nic",
+	"tx_bytes_nic",
+	"rx_pkts_nic",
+	"rx_bytes_nic",
+	"d_tx_dropped",
+	"d_tx_failed",
+	"d_ps_mode",
+	"d_group",
+	"d_tx_power",
+};
+
+#define MAC80211_HWSIM_SSTATS_LEN ARRAY_SIZE(mac80211_hwsim_gstrings_stats)
+
+void mac80211_hwsim_get_et_strings(struct ieee80211_hw *hw,
+				   struct ieee80211_vif *vif,
+				   u32 sset, u8 *data)
+{
+	if (sset == ETH_SS_STATS)
+		memcpy(data, *mac80211_hwsim_gstrings_stats,
+		       sizeof(mac80211_hwsim_gstrings_stats));
+}
+
+int mac80211_hwsim_get_et_sset_count(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif, int sset)
+{
+	if (sset == ETH_SS_STATS)
+		return MAC80211_HWSIM_SSTATS_LEN;
+	return 0;
+}
+
+void mac80211_hwsim_get_et_stats(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif,
+				 struct ethtool_stats *stats, u64 *data)
+{
+	struct mac80211_hwsim_data *ar = hw->priv;
+	int i = 0;
+
+	data[i++] = ar->tx_pkts;
+	data[i++] = ar->tx_bytes;
+	data[i++] = ar->rx_pkts;
+	data[i++] = ar->rx_bytes;
+	data[i++] = ar->tx_dropped;
+	data[i++] = ar->tx_failed;
+	data[i++] = ar->ps;
+	data[i++] = ar->group;
+	data[i++] = ar->power_level;
+
+	WARN_ON(i != MAC80211_HWSIM_SSTATS_LEN);
+}
+
 static const struct ieee80211_ops mac80211_hwsim_ops = {
 	.tx = mac80211_hwsim_tx,
 	.start = mac80211_hwsim_start,
@@ -1940,6 +2008,9 @@ static const struct ieee80211_ops mac80211_hwsim_ops = {
 	.flush = mac80211_hwsim_flush,
 	.get_tsf = mac80211_hwsim_get_tsf,
 	.set_tsf = mac80211_hwsim_set_tsf,
+	.get_et_sset_count = mac80211_hwsim_get_et_sset_count,
+	.get_et_stats = mac80211_hwsim_get_et_stats,
+	.get_et_strings = mac80211_hwsim_get_et_strings,
 };
 
 static struct ieee80211_ops mac80211_hwsim_mchan_ops;
@@ -2387,6 +2458,8 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2,
 	rx_status.signal = nla_get_u32(info->attrs[HWSIM_ATTR_SIGNAL]);
 
 	memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
+	data2->rx_pkts++;
+	data2->rx_bytes += skb->len;
 	ieee80211_rx_irqsafe(data2->hw, skb);
 
 	return 0;
Signature · 1 line
1.7.11.7
maintainer
#2 lore raw

Re: [PATCH 2/3] mac-hwsim: add ethtool stats support.

drivers/net/wireless/mac80211_hwsim.c static void mac80211_hwsim_unassign_vif_chanctx(struct ieee80211_hw *hw, · line 1946

Quoted 10 lines · On Thu, 2014-09-25 at 14:22 -0700, [email protected] wrote:
drivers/net/wireless/mac80211_hwsim.c +10 -0
+static const char mac80211_hwsim_gstrings_stats[][ETH_GSTRING_LEN] = {
+	"tx_pkts_nic",
+	"tx_bytes_nic",
+	"rx_pkts_nic",
+	"rx_bytes_nic",
+	"d_tx_dropped",
+	"d_tx_failed",
+	"d_ps_mode",
+	"d_group",
+	"d_tx_power",

What's that d_ prefix?

johannes

author
#3 lore raw

Re: [PATCH 2/3] mac-hwsim: add ethtool stats support.

Quoted 14 lines · Johannes Berg

drivers/net/wireless/mac80211_hwsim.c static void mac80211_hwsim_unassign_vif_chanctx(struct ieee80211_hw *hw, · line 1946

Quoted 10 lines · On Thu, 2014-09-25 at 14:22 -0700, [email protected] wrote:
drivers/net/wireless/mac80211_hwsim.c +10 -0
+static const char mac80211_hwsim_gstrings_stats[][ETH_GSTRING_LEN] = {
+	"tx_pkts_nic",
+	"tx_bytes_nic",
+	"rx_pkts_nic",
+	"rx_bytes_nic",
+	"d_tx_dropped",
+	"d_tx_failed",
+	"d_ps_mode",
+	"d_group",
+	"d_tx_power",

What's that d_ prefix?

Stats from the driver v/s from the mac80211 stack. Basically, it mimics how I did ath9k, ath9k_htc, and ath10k stats (though not sure ath10k made it upstream yet).

The first 4 match those wifi drivers as well as some Intel wired NICs.

It doesn't matter a huge amount if you want to change the names, but it makes user-space stats reporting easier if you would leave them the same...

Thanks,
Ben

Quoted 3 lines

johannes

Signature · 2 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com
maintainer
#4 lore raw

Re: [PATCH 2/3] mac-hwsim: add ethtool stats support.

Quoted 20 lines · Ben Greear
Quoted 14 lines · Johannes Berg

drivers/net/wireless/mac80211_hwsim.c static void mac80211_hwsim_unassign_vif_chanctx(struct ieee80211_hw *hw, · line 1946

Quoted 10 lines · On Thu, 2014-09-25 at 14:22 -0700, [email protected] wrote:
drivers/net/wireless/mac80211_hwsim.c +10 -0
+static const char mac80211_hwsim_gstrings_stats[][ETH_GSTRING_LEN] = {
+	"tx_pkts_nic",
+	"tx_bytes_nic",
+	"rx_pkts_nic",
+	"rx_bytes_nic",
+	"d_tx_dropped",
+	"d_tx_failed",
+	"d_ps_mode",
+	"d_group",
+	"d_tx_power",

What's that d_ prefix?

Stats from the driver v/s from the mac80211 stack. Basically, it mimics how I did ath9k, ath9k_htc, and ath10k stats (though not sure ath10k made it upstream yet).

Quoted 6 lines

The first 4 match those wifi drivers as well as some Intel wired NICs.

It doesn't matter a huge amount if you want to change the names, but it makes user-space stats reporting easier if you would leave them the same...

Ok, no problem. Can you resend though with the prefixes etc?

johannes

#5 lore raw

PATCH 3/3 mac-hwsim: fix typo, remove un-needed goto.

In reply to [email protected]

From: Ben Greear <[email protected]>

Trivial cleanups.

---
 drivers/net/wireless/mac80211_hwsim.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/net/wireless/mac80211_hwsim.c +1 -2
index ae90438..43435c0 100644
@@ -436,7 +436,7 @@ struct mac80211_hwsim_data {
 	/*
 	 * Only radios in the same group can communicate together (the
 	 * channel has to match too). Each bit represents a group. A
-	 * radio can be in more then one group.
+	 * radio can be in more than one group.
 	 */
 	u64 group;
 
@@ -2465,7 +2465,6 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2,
 	return 0;
 err:
 	printk(KERN_DEBUG "mac80211_hwsim: error occurred in %s\n", __func__);
-	goto out;
 out:
 	dev_kfree_skb(skb);
 	return -EINVAL;
Signature · 1 line
1.7.11.7