sunxi: Add support for the Mele M3 board
PATCH 1/1 sunxi: Add support for the Mele M3 board
The Mele M3 is yet another Allwinnner based Android top set box from Mele.
It uses a housing similar to the A2000, but without the USM sata storage slot at the top.
It features an A20 SoC, 1G RAM, 4G eMMC (unique for Allwinner devices), 100Mbit ethernet, HDMI out, 3 USB A receptacles, VGA, and A/V OUT connections.
--- board/sunxi/MAINTAINERS | 1 + board/sunxi/Makefile | 1 + configs/Mele_M3_defconfig | 5 +++++ 3 files changed, 7 insertions(+) create mode 100644 configs/Mele_M3_defconfig
board/sunxi/MAINTAINERS +1 -0
@@ -8,6 +8,7 @@ F: configs/ba10_tv_box_defconfig F: configs/Cubieboard_defconfig F: configs/Mele_A1000_defconfig F: configs/Mele_A1000G_defconfig +F: configs/Mele_M3_defconfig F: configs/Mini-X_defconfig F: configs/Mini-X-1Gb_defconfig F: include/configs/sun5i.h
board/sunxi/Makefile +1 -0
@@ -28,6 +28,7 @@ obj-$(CONFIG_CUBIETRUCK) += dram_cubietruck.o obj-$(CONFIG_I12_TVBOX) += dram_sun7i_384_1024_iow16.o obj-$(CONFIG_MELE_A1000) += dram_sun4i_360_512.o obj-$(CONFIG_MELE_A1000G) += dram_sun4i_360_1024_iow8.o +obj-$(CONFIG_MELE_M3) += dram_sun7i_384_1024_iow16.o obj-$(CONFIG_MINI_X) += dram_sun4i_360_512.o obj-$(CONFIG_MINI_X_1GB) += dram_sun4i_360_1024_iow16.o obj-$(CONFIG_PCDUINO3) += dram_linksprite_pcduino3.o
configs/Mele_M3_defconfig new file +5 -0
@@ -0,0 +1,5 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="MELE_M3,AXP209_POWER,SUNXI_GMAC,USB_EHCI" +CONFIG_FDTFILE="sun7i-a20-m3.dtb" ++S:CONFIG_ARM=y ++S:CONFIG_TARGET_SUN7I=y
Signature · 1 line
2.1.0
PATCH 1/1 sunxi: Add support for the Mele M3 board
Quoted 9 lines · Hans de Goede
The Mele M3 is yet another Allwinnner based Android top set box from Mele.
It uses a housing similar to the A2000, but without the USM sata storage slot at the top.
It features an A20 SoC, 1G RAM, 4G eMMC (unique for Allwinner devices), 100Mbit ethernet, HDMI out, 3 USB A receptacles, VGA, and A/V OUT connections.
Signed-off-by Hans de Goede <[email protected]>
PATCH 1/1 sunxi: Add support for the Mele M3 board
Hi,
Quoted 6 lines · Ian Campbell
Quoted 5 lines · Hans de Goede
The Mele M3 is yet another Allwinnner based Android top set box from Mele.
It uses a housing similar to the A2000, but without the USM sata storage slot at the top.
Quoted 6 lines
Quoted 4 lines
It features an A20 SoC, 1G RAM, 4G eMMC (unique for Allwinner devices), 100Mbit ethernet, HDMI out, 3 USB A receptacles, VGA, and A/V OUT connections.
Signed-off-by Hans de Goede <[email protected]>Acked-by Ian Campbell <[email protected]>
Thanks, pushed to u-boot-sunxi/next
Regards,
Hans