Skip to contentSkip to conversation

drm/i915: fix short vs. long hpd detection

PATCH In review Jani Nikula 3 participants 7 messages Oct 2, 2014 – Oct 16, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/i915: fix short vs. long hpd detection

Fix short vs. long hpd detection for non-g4x and non-pch split platforms.

Broken since introduction in
commit 13cf550448b58abf8f44f5d6a560f2d20871c965

Author: Dave Airlie <[email protected]>
Date:   Wed Jun 18 11:29:35 2014 +1000

drm/i915: rework digital port IRQ handling (v2)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83175

---
 drivers/gpu/drm/i915/i915_irq.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/i915_irq.c +7 -7
index 72cb9397ecc5..3ff6f1bb594a 100644
@@ -1708,7 +1708,7 @@ static irqreturn_t gen8_gt_irq_handler(struct drm_device *dev,
 #define HPD_STORM_DETECT_PERIOD 1000
 #define HPD_STORM_THRESHOLD 5
 
-static int ilk_port_to_hotplug_shift(enum port port)
+static int pch_port_to_hotplug_shift(enum port port)
 {
 	switch (port) {
 	case PORT_A:
@@ -1724,7 +1724,7 @@ static int ilk_port_to_hotplug_shift(enum port port)
 	}
 }
 
-static int g4x_port_to_hotplug_shift(enum port port)
+static int i915_port_to_hotplug_shift(enum port port)
 {
 	switch (port) {
 	case PORT_A:
@@ -1782,12 +1782,12 @@ static inline void intel_hpd_irq_handler(struct drm_device *dev,
 		if (port && dev_priv->hpd_irq_port[port]) {
 			bool long_hpd;
 
-			if (IS_G4X(dev)) {
-				dig_shift = g4x_port_to_hotplug_shift(port);
-				long_hpd = (hotplug_trigger >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;
-			} else {
-				dig_shift = ilk_port_to_hotplug_shift(port);
+			if (HAS_PCH_SPLIT(dev)) {
+				dig_shift = pch_port_to_hotplug_shift(port);
 				long_hpd = (dig_hotplug_reg >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;
+			} else {
+				dig_shift = i915_port_to_hotplug_shift(port);
+				long_hpd = (hotplug_trigger >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;
 			}
 
 			DRM_DEBUG_DRIVER("digital hpd port %c - %s\n",
Signature · 1 line
1.9.1
#1 lore raw
Quoted 40 lines · Jani Nikula

Fix short vs. long hpd detection for non-g4x and non-pch split platforms.

Broken since introduction in
commit 13cf550448b58abf8f44f5d6a560f2d20871c965

Author: Dave Airlie <[email protected]>
Date:   Wed Jun 18 11:29:35 2014 +1000

drm/i915: rework digital port IRQ handling (v2)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83175

---
 drivers/gpu/drm/i915/i915_irq.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/i915_irq.c +2 -2
index 72cb9397ecc5..3ff6f1bb594a 100644
@@ -1708,7 +1708,7 @@ static irqreturn_t gen8_gt_irq_handler(struct drm_device *dev,
 #define HPD_STORM_DETECT_PERIOD 1000
 #define HPD_STORM_THRESHOLD 5
 
-static int ilk_port_to_hotplug_shift(enum port port)
+static int pch_port_to_hotplug_shift(enum port port)
 {
 	switch (port) {
 	case PORT_A:
@@ -1724,7 +1724,7 @@ static int ilk_port_to_hotplug_shift(enum port port)
 	}
 }
 
-static int g4x_port_to_hotplug_shift(enum port port)
+static int i915_port_to_hotplug_shift(enum port port)
 {
 	switch (port) {
 	case PORT_A:
@@ -1782,12 +1782,12 @@ static inline void intel_hpd_irq_handler(struct drm_device *dev,
 		if (port && dev_priv->hpd_irq_port[port]) {

drivers/gpu/drm/i915/i915_irq.c static inline void intel_hpd_irq_handler(struct drm_device *dev, · line 1787

Quoted 10 lines
drivers/gpu/drm/i915/i915_irq.c +2 -5
 			bool long_hpd;
 
-			if (IS_G4X(dev)) {
-				dig_shift = g4x_port_to_hotplug_shift(port);
-				long_hpd = (hotplug_trigger >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;
-			} else {
-				dig_shift = ilk_port_to_hotplug_shift(port);
+			if (HAS_PCH_SPLIT(dev)) {
+				dig_shift = pch_port_to_hotplug_shift(port);
 				long_hpd = (dig_hotplug_reg >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;

Using the new HAS_GMCH_DISPLAY will probably survive longer (i.e. skl). -Daniel

Quoted 13 lines
drivers/gpu/drm/i915/i915_irq.c +3 -0
+			} else {
+				dig_shift = i915_port_to_hotplug_shift(port);
+				long_hpd = (hotplug_trigger >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;
 			}
 
 			DRM_DEBUG_DRIVER("digital hpd port %c - %s\n",
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
#2 lore raw
Quoted 43 lines · Daniel Vetter
Quoted 42 lines · Jani Nikula

Fix short vs. long hpd detection for non-g4x and non-pch split platforms.

Broken since introduction in
commit 13cf550448b58abf8f44f5d6a560f2d20871c965

Author: Dave Airlie <[email protected]>
Date:   Wed Jun 18 11:29:35 2014 +1000

drm/i915: rework digital port IRQ handling (v2)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83175

---
 drivers/gpu/drm/i915/i915_irq.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/i915_irq.c +2 -2
index 72cb9397ecc5..3ff6f1bb594a 100644
@@ -1708,7 +1708,7 @@ static irqreturn_t gen8_gt_irq_handler(struct drm_device *dev,
 #define HPD_STORM_DETECT_PERIOD 1000
 #define HPD_STORM_THRESHOLD 5
 
-static int ilk_port_to_hotplug_shift(enum port port)
+static int pch_port_to_hotplug_shift(enum port port)
 {
 	switch (port) {
 	case PORT_A:
@@ -1724,7 +1724,7 @@ static int ilk_port_to_hotplug_shift(enum port port)
 	}
 }
 
-static int g4x_port_to_hotplug_shift(enum port port)
+static int i915_port_to_hotplug_shift(enum port port)
 {
 	switch (port) {
 	case PORT_A:
@@ -1782,12 +1782,12 @@ static inline void intel_hpd_irq_handler(struct drm_device *dev,
 		if (port && dev_priv->hpd_irq_port[port]) {
 			bool long_hpd;
 
Quoted 10 lines

drivers/gpu/drm/i915/i915_irq.c static inline void intel_hpd_irq_handler(struct drm_device *dev, · line 1787

Quoted 8 lines
drivers/gpu/drm/i915/i915_irq.c +2 -5
-			if (IS_G4X(dev)) {
-				dig_shift = g4x_port_to_hotplug_shift(port);
-				long_hpd = (hotplug_trigger >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;
-			} else {
-				dig_shift = ilk_port_to_hotplug_shift(port);
+			if (HAS_PCH_SPLIT(dev)) {
+				dig_shift = pch_port_to_hotplug_shift(port);
 				long_hpd = (dig_hotplug_reg >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;

Using the new HAS_GMCH_DISPLAY will probably survive longer (i.e. skl).

Did we have a concenses on this? I want hpd on my BSW.

Quoted 24 lines

-Daniel

Quoted 13 lines
drivers/gpu/drm/i915/i915_irq.c +3 -0
+			} else {
+				dig_shift = i915_port_to_hotplug_shift(port);
+				long_hpd = (hotplug_trigger >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;
 			}
 
 			DRM_DEBUG_DRIVER("digital hpd port %c - %s\n",
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 2 lines
Ville Syrjälä
Intel OTC
#3 lore raw
Quoted 55 lines · Ville Syrjälä
Quoted 43 lines · Daniel Vetter
Quoted 42 lines · Jani Nikula

Fix short vs. long hpd detection for non-g4x and non-pch split platforms.

Broken since introduction in
commit 13cf550448b58abf8f44f5d6a560f2d20871c965

Author: Dave Airlie <[email protected]>
Date:   Wed Jun 18 11:29:35 2014 +1000

drm/i915: rework digital port IRQ handling (v2)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83175

---
 drivers/gpu/drm/i915/i915_irq.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/i915_irq.c +2 -2
index 72cb9397ecc5..3ff6f1bb594a 100644
@@ -1708,7 +1708,7 @@ static irqreturn_t gen8_gt_irq_handler(struct drm_device *dev,
 #define HPD_STORM_DETECT_PERIOD 1000
 #define HPD_STORM_THRESHOLD 5
 
-static int ilk_port_to_hotplug_shift(enum port port)
+static int pch_port_to_hotplug_shift(enum port port)
 {
 	switch (port) {
 	case PORT_A:
@@ -1724,7 +1724,7 @@ static int ilk_port_to_hotplug_shift(enum port port)
 	}
 }
 
-static int g4x_port_to_hotplug_shift(enum port port)
+static int i915_port_to_hotplug_shift(enum port port)
 {
 	switch (port) {
 	case PORT_A:
@@ -1782,12 +1782,12 @@ static inline void intel_hpd_irq_handler(struct drm_device *dev,
 		if (port && dev_priv->hpd_irq_port[port]) {
 			bool long_hpd;
 
Quoted 10 lines

drivers/gpu/drm/i915/i915_irq.c static inline void intel_hpd_irq_handler(struct drm_device *dev, · line 1787

Quoted 8 lines
drivers/gpu/drm/i915/i915_irq.c +2 -5
-			if (IS_G4X(dev)) {
-				dig_shift = g4x_port_to_hotplug_shift(port);
-				long_hpd = (hotplug_trigger >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;
-			} else {
-				dig_shift = ilk_port_to_hotplug_shift(port);
+			if (HAS_PCH_SPLIT(dev)) {
+				dig_shift = pch_port_to_hotplug_shift(port);
 				long_hpd = (dig_hotplug_reg >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;

Using the new HAS_GMCH_DISPLAY will probably survive longer (i.e. skl).

Quoted 1 line

Did we have a concenses on this? I want hpd on my BSW.

Sorry, we agreed on IRC that the ifs were okay as-is, but we're still missing review.

BR,
Jani.

Quoted 29 lines
Quoted 25 lines

-Daniel

Quoted 13 lines
drivers/gpu/drm/i915/i915_irq.c +3 -0
+			} else {
+				dig_shift = i915_port_to_hotplug_shift(port);
+				long_hpd = (hotplug_trigger >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;
 			}
 
 			DRM_DEBUG_DRIVER("digital hpd port %c - %s\n",
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 2 lines
Ville Syrjälä
Intel OTC
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by
#4 lore raw
Quoted 56 lines · Jani Nikula
Quoted 55 lines · Ville Syrjälä
Quoted 53 lines · Daniel Vetter
Quoted 40 lines · Jani Nikula

Fix short vs. long hpd detection for non-g4x and non-pch split platforms.

Broken since introduction in
commit 13cf550448b58abf8f44f5d6a560f2d20871c965

Author: Dave Airlie <[email protected]>
Date:   Wed Jun 18 11:29:35 2014 +1000

drm/i915: rework digital port IRQ handling (v2)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83175

---
 drivers/gpu/drm/i915/i915_irq.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/i915_irq.c +2 -2
index 72cb9397ecc5..3ff6f1bb594a 100644
@@ -1708,7 +1708,7 @@ static irqreturn_t gen8_gt_irq_handler(struct drm_device *dev,
 #define HPD_STORM_DETECT_PERIOD 1000
 #define HPD_STORM_THRESHOLD 5
 
-static int ilk_port_to_hotplug_shift(enum port port)
+static int pch_port_to_hotplug_shift(enum port port)
 {
 	switch (port) {
 	case PORT_A:
@@ -1724,7 +1724,7 @@ static int ilk_port_to_hotplug_shift(enum port port)
 	}
 }
 
-static int g4x_port_to_hotplug_shift(enum port port)
+static int i915_port_to_hotplug_shift(enum port port)
 {
 	switch (port) {
 	case PORT_A:
@@ -1782,12 +1782,12 @@ static inline void intel_hpd_irq_handler(struct drm_device *dev,
 		if (port && dev_priv->hpd_irq_port[port]) {

drivers/gpu/drm/i915/i915_irq.c static inline void intel_hpd_irq_handler(struct drm_device *dev, · line 1787

Quoted 10 lines
drivers/gpu/drm/i915/i915_irq.c +2 -5
 			bool long_hpd;
 
-			if (IS_G4X(dev)) {
-				dig_shift = g4x_port_to_hotplug_shift(port);
-				long_hpd = (hotplug_trigger >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;
-			} else {
-				dig_shift = ilk_port_to_hotplug_shift(port);
+			if (HAS_PCH_SPLIT(dev)) {
+				dig_shift = pch_port_to_hotplug_shift(port);
 				long_hpd = (dig_hotplug_reg >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;

Using the new HAS_GMCH_DISPLAY will probably survive longer (i.e. skl).

Quoted 4 lines
Quoted 1 line

Did we have a concenses on this? I want hpd on my BSW.

Sorry, we agreed on IRC that the ifs were okay as-is, but we're still missing review.

Although after checking the spec it does look like HAS_GMCH_DISPLAY might be a bit more future proof.

Quoted 39 lines

BR,
Jani.

Quoted 29 lines
Quoted 25 lines

-Daniel

Quoted 13 lines
drivers/gpu/drm/i915/i915_irq.c +3 -0
+			} else {
+				dig_shift = i915_port_to_hotplug_shift(port);
+				long_hpd = (hotplug_trigger >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;
 			}
 
 			DRM_DEBUG_DRIVER("digital hpd port %c - %s\n",
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 2 lines
Ville Syrjälä
Intel OTC
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
Signature · 2 lines
Ville Syrjälä
Intel OTC
author Applied
#5 lore raw
Quoted 59 lines · Ville Syrjälä
Quoted 58 lines · Jani Nikula
Quoted 56 lines · Ville Syrjälä
Quoted 43 lines · Daniel Vetter
Quoted 42 lines · Jani Nikula

Fix short vs. long hpd detection for non-g4x and non-pch split platforms.

Broken since introduction in
commit 13cf550448b58abf8f44f5d6a560f2d20871c965

Author: Dave Airlie <[email protected]>
Date:   Wed Jun 18 11:29:35 2014 +1000

drm/i915: rework digital port IRQ handling (v2)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83175

---
 drivers/gpu/drm/i915/i915_irq.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/i915_irq.c +2 -2
index 72cb9397ecc5..3ff6f1bb594a 100644
@@ -1708,7 +1708,7 @@ static irqreturn_t gen8_gt_irq_handler(struct drm_device *dev,
 #define HPD_STORM_DETECT_PERIOD 1000
 #define HPD_STORM_THRESHOLD 5
 
-static int ilk_port_to_hotplug_shift(enum port port)
+static int pch_port_to_hotplug_shift(enum port port)
 {
 	switch (port) {
 	case PORT_A:
@@ -1724,7 +1724,7 @@ static int ilk_port_to_hotplug_shift(enum port port)
 	}
 }
 
-static int g4x_port_to_hotplug_shift(enum port port)
+static int i915_port_to_hotplug_shift(enum port port)
 {
 	switch (port) {
 	case PORT_A:
@@ -1782,12 +1782,12 @@ static inline void intel_hpd_irq_handler(struct drm_device *dev,
 		if (port && dev_priv->hpd_irq_port[port]) {
 			bool long_hpd;
 
Quoted 10 lines

drivers/gpu/drm/i915/i915_irq.c static inline void intel_hpd_irq_handler(struct drm_device *dev, · line 1787

Quoted 8 lines
drivers/gpu/drm/i915/i915_irq.c +2 -5
-			if (IS_G4X(dev)) {
-				dig_shift = g4x_port_to_hotplug_shift(port);
-				long_hpd = (hotplug_trigger >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;
-			} else {
-				dig_shift = ilk_port_to_hotplug_shift(port);
+			if (HAS_PCH_SPLIT(dev)) {
+				dig_shift = pch_port_to_hotplug_shift(port);
 				long_hpd = (dig_hotplug_reg >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;

Using the new HAS_GMCH_DISPLAY will probably survive longer (i.e. skl).

Did we have a concenses on this? I want hpd on my BSW.

Quoted 7 lines
Quoted 2 lines

Sorry, we agreed on IRC that the ifs were okay as-is, but we're still missing review.

Although after checking the spec it does look like HAS_GMCH_DISPLAY might be a bit more future proof.

Pushed to drm-intel-next-fixes, thanks for the review.

BR,
Jani.

Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw
In reply to Jani Nikula
Quoted 56 lines · Jani Nikula
Quoted 55 lines · Ville Syrjälä
Quoted 53 lines · Daniel Vetter
Quoted 40 lines · Jani Nikula

Fix short vs. long hpd detection for non-g4x and non-pch split platforms.

Broken since introduction in
commit 13cf550448b58abf8f44f5d6a560f2d20871c965

Author: Dave Airlie <[email protected]>
Date:   Wed Jun 18 11:29:35 2014 +1000

drm/i915: rework digital port IRQ handling (v2)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83175

---
 drivers/gpu/drm/i915/i915_irq.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/i915_irq.c +2 -2
index 72cb9397ecc5..3ff6f1bb594a 100644
@@ -1708,7 +1708,7 @@ static irqreturn_t gen8_gt_irq_handler(struct drm_device *dev,
 #define HPD_STORM_DETECT_PERIOD 1000
 #define HPD_STORM_THRESHOLD 5
 
-static int ilk_port_to_hotplug_shift(enum port port)
+static int pch_port_to_hotplug_shift(enum port port)
 {
 	switch (port) {
 	case PORT_A:
@@ -1724,7 +1724,7 @@ static int ilk_port_to_hotplug_shift(enum port port)
 	}
 }
 
-static int g4x_port_to_hotplug_shift(enum port port)
+static int i915_port_to_hotplug_shift(enum port port)
 {
 	switch (port) {
 	case PORT_A:
@@ -1782,12 +1782,12 @@ static inline void intel_hpd_irq_handler(struct drm_device *dev,
 		if (port && dev_priv->hpd_irq_port[port]) {

drivers/gpu/drm/i915/i915_irq.c static inline void intel_hpd_irq_handler(struct drm_device *dev, · line 1787

Quoted 10 lines
drivers/gpu/drm/i915/i915_irq.c +2 -5
 			bool long_hpd;
 
-			if (IS_G4X(dev)) {
-				dig_shift = g4x_port_to_hotplug_shift(port);
-				long_hpd = (hotplug_trigger >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;
-			} else {
-				dig_shift = ilk_port_to_hotplug_shift(port);
+			if (HAS_PCH_SPLIT(dev)) {
+				dig_shift = pch_port_to_hotplug_shift(port);
 				long_hpd = (dig_hotplug_reg >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;

Using the new HAS_GMCH_DISPLAY will probably survive longer (i.e. skl).

Quoted 4 lines
Quoted 1 line

Did we have a concenses on this? I want hpd on my BSW.

Sorry, we agreed on IRC that the ifs were okay as-is, but we're still missing review.

Even a tested-by would be welcome!

Jani.

Quoted 43 lines

BR,
Jani.

Quoted 29 lines
Quoted 25 lines

-Daniel

Quoted 13 lines
drivers/gpu/drm/i915/i915_irq.c +3 -0
+			} else {
+				dig_shift = i915_port_to_hotplug_shift(port);
+				long_hpd = (hotplug_trigger >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;
 			}
 
 			DRM_DEBUG_DRIVER("digital hpd port %c - %s\n",
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 2 lines
Ville Syrjälä
Intel OTC
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx