init: calibrate: fix style issues
PATCH 1/1 init: calibrate: fix style issues
* fix multiple quoted string split across lines style issues
* change printk(KERN_NOTICE to pr_notice
* insert spaces after , in function call
--- init/calibrate.c | 34 +++++++++++++--------------------- 1 file changed, 13 insertions(+), 21 deletions(-)
init/calibrate.c +13 -21
@@ -15,7 +15,7 @@ unsigned long lpj_fine;unsigned long preset_lpj;static int __init lpj_setup (char *str) { - preset_lpj =simple_strtoul (str,NULL ,0 ); + preset_lpj =simple_strtoul (str,NULL ,0 );return 1 ; }
@@ -40,11 +40,13 @@ static unsigned long calibrate_delay_direct(void)unsigned long good_timer_sum =0 ;unsigned long good_timer_count =0 ;unsigned long measured_times[MAX_DIRECT_CALIBRATION_RETRIES ]; -int max =-1 ;/* index of measured_times with max/min values or not set */ + +/* index of measured_times with max/min values or not set */ +int max =-1 ;int min =-1 ;int i; -if (read_current_timer (&pre_start) <0 ) +if (read_current_timer (&pre_start) <0 )return 0 ;/*
@@ -95,9 +97,7 @@ static unsigned long calibrate_delay_direct(void)* >= 12.5% apart, redo calibration. */ if (start >= post_end) -printk (KERN_NOTICE "calibrate_delay_direct() ignoring " -"timer_rate as we had a TSC wrap around" -" start=%lu >=post_end=%lu\n" , +pr_notice ("calibrate_delay_direct() ignoring timer_rate as we had a TSC wrap around start=%lu >=post_end=%lu\n" , start, post_end);if (start < post_end && pre_start !=0 && pre_end !=0 && (timer_rate_max - timer_rate_min) < (timer_rate_max >>3 )) {
@@ -134,14 +134,12 @@ static unsigned long calibrate_delay_direct(void) good_timer_count =0 ;if ((measured_times[max] - estimate) < (estimate - measured_times[min])) { -printk (KERN_NOTICE "calibrate_delay_direct() dropping " -"min bogoMips estimate %d = %lu\n" , +pr_notice ("calibrate_delay_direct() dropping min bogoMips estimate %d = %lu\n" , min, measured_times[min]); measured_times[min] =0 ; min = max; }else { -printk (KERN_NOTICE "calibrate_delay_direct() dropping " -"max bogoMips estimate %d = %lu\n" , +pr_notice ("calibrate_delay_direct() dropping max bogoMips estimate %d = %lu\n" , max, measured_times[max]); measured_times[max] =0 ; max = min;
@@ -160,9 +158,7 @@ static unsigned long calibrate_delay_direct(void) } -printk (KERN_NOTICE "calibrate_delay_direct() failed to get a good " -"estimate for loops_per_jiffy.\nProbably due to long platform " -"interrupts. Consider using \"lpj=\" boot option.\n" ); +pr_notice ("calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.\nProbably due to long platform interrupts. Consider using \"lpj=\" boot option.\n" );return 0 ; }#else
@@ -280,23 +276,19 @@ void calibrate_delay(void)if (per_cpu (cpu_loops_per_jiffy, this_cpu)) { lpj =per_cpu (cpu_loops_per_jiffy, this_cpu);if (!printed) -pr_info ("Calibrating delay loop (skipped) " -"already calibrated this CPU" ); +pr_info ("Calibrating delay loop (skipped) already calibrated this CPU" ); }else if (preset_lpj) { lpj = preset_lpj;if (!printed) -pr_info ("Calibrating delay loop (skipped) " -"preset value.. " ); +pr_info ("Calibrating delay loop (skipped) preset value.. " ); }else if ((!printed) && lpj_fine) { lpj = lpj_fine; -pr_info ("Calibrating delay loop (skipped), " -"value calculated using timer frequency.. " ); +pr_info ("Calibrating delay loop (skipped), value calculated using timer frequency.. " ); }else if ((lpj =calibrate_delay_is_known ())) { ; }else if ((lpj =calibrate_delay_direct ()) !=0 ) {if (!printed) -pr_info ("Calibrating delay using timer " -"specific routine.. " ); +pr_info ("Calibrating delay using timer specific routine.. " ); }else {if (!printed)pr_info ("Calibrating delay loop... " );
Signature · 1 line
1.9.1
Quoted 3 lines · Rasmus Wriedt Larsen
* fix multiple quoted string split across lines style issues
* change printk(KERN_NOTICE topr_notice
* insert spaces after , in function call
[]
init/calibrate.c
Quoted 1 line
init/calibrate.c +0
-0
[]
init/calibrate.c static unsigned long calibrate_delay_direct(void) · line 161
Quoted 8 lines
init/calibrate.c +1
-3@@ -160,9 +158,7 @@ static unsigned long calibrate_delay_direct(void) } -printk (KERN_NOTICE "calibrate_delay_direct() failed to get a good " -"estimate for loops_per_jiffy.\nProbably due to long platform " -"interrupts. Consider using \"lpj=\" boot option.\n" ); +pr_notice ("calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.\nProbably due to long platform interrupts. Consider using \"lpj=\" boot option.\n" );
This would be better on 2 lines:
pr_notice("calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.\n"
"Probably due to long platform interrupts. Consider using \"lpj=\" boot option.\n");The grammar is poor though and this
could be better phrased.
Quoted 11 lines · Joe Perches
Quoted 3 lines · Rasmus Wriedt Larsen
* fix multiple quoted string split across lines style issues
* change printk(KERN_NOTICE topr_notice
* insert spaces after , in function call[]
init/calibrate.c
Quoted 1 line
init/calibrate.c +0
-0[]
Quoted 4 lines
init/calibrate.c +0
-0@@ -160,9 +158,7 @@ static unsigned long calibrate_delay_direct(void) }
Quoted 8 lines
init/calibrate.c static unsigned long calibrate_delay_direct(void) · line 161
Quoted 4 lines
init/calibrate.c +1
-3-printk (KERN_NOTICE "calibrate_delay_direct() failed to get a good " -"estimate for loops_per_jiffy.\nProbably due to long platform " -"interrupts. Consider using \"lpj=\" boot option.\n" ); +pr_notice ("calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.\nProbably due to long platform interrupts. Consider using \"lpj=\" boot option.\n" );This would be better on 2 lines:
pr_notice("calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.\n" "Probably due to long platform interrupts. Consider using \"lpj=\" boot option.\n");
Yes, indeed it would. (will fix in upcoming patch)
Quoted 2 lines
The grammar is poor though and this
could be better phrased.
Any suggestions? I don't see anything in particular (but English is not my native language either)
Quoted 21 lines · Rasmus Wriedt Larsen
Quoted 11 lines · Joe Perches
Quoted 3 lines · Rasmus Wriedt Larsen
* fix multiple quoted string split across lines style issues
* change printk(KERN_NOTICE topr_notice
* insert spaces after , in function call[]
init/calibrate.c
Quoted 1 line
init/calibrate.c +0
-0[]
Quoted 4 lines
init/calibrate.c +0
-0@@ -160,9 +158,7 @@ static unsigned long calibrate_delay_direct(void) }Quoted 8 lines
init/calibrate.c static unsigned long calibrate_delay_direct(void) · line 161
Quoted 4 lines
init/calibrate.c +1
-3-printk (KERN_NOTICE "calibrate_delay_direct() failed to get a good " -"estimate for loops_per_jiffy.\nProbably due to long platform " -"interrupts. Consider using \"lpj=\" boot option.\n" ); +pr_notice ("calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.\nProbably due to long platform interrupts. Consider using \"lpj=\" boot option.\n" );This would be better on 2 lines:
pr_notice("calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.\n" "Probably due to long platform interrupts. Consider using \"lpj=\" boot option.\n");
Quoted 7 lines
Yes, indeed it would. (will fix in upcoming patch)
Quoted 2 lines
The grammar is poor though and this
could be better phrased.Any suggestions? I don't see anything in particular (but English is not my native language either)
I'd suggest something on a single line like:
pr_notice("%s: failed to reasonably estimate loops_per_jiffy (long platform interrupts?) - perhaps use boot option 'lpj='\n",
__func__);I prefer complete individual messages and don't
mind longer dmesg message lines.
PATCH v2 1/1 init: calibrate: fix style issues
* fix multiple quoted string split across lines style issues
* change printk(KERN_NOTICE to pr_notice
* insert spaces after , in function call
* change two line pr_notice msg to one line (credit: Joe Perches)
--- init/calibrate.c | 35 ++++++++++++++--------------------- 1 file changed, 14 insertions(+), 21 deletions(-)
init/calibrate.c +14 -21
@@ -15,7 +15,7 @@ unsigned long lpj_fine;unsigned long preset_lpj;static int __init lpj_setup (char *str) { - preset_lpj =simple_strtoul (str,NULL ,0 ); + preset_lpj =simple_strtoul (str,NULL ,0 );return 1 ; }
@@ -40,11 +40,13 @@ static unsigned long calibrate_delay_direct(void)unsigned long good_timer_sum =0 ;unsigned long good_timer_count =0 ;unsigned long measured_times[MAX_DIRECT_CALIBRATION_RETRIES ]; -int max =-1 ;/* index of measured_times with max/min values or not set */ + +/* index of measured_times with max/min values or not set */ +int max =-1 ;int min =-1 ;int i; -if (read_current_timer (&pre_start) <0 ) +if (read_current_timer (&pre_start) <0 )return 0 ;/*
@@ -95,9 +97,7 @@ static unsigned long calibrate_delay_direct(void)* >= 12.5% apart, redo calibration. */ if (start >= post_end) -printk (KERN_NOTICE "calibrate_delay_direct() ignoring " -"timer_rate as we had a TSC wrap around" -" start=%lu >=post_end=%lu\n" , +pr_notice ("calibrate_delay_direct() ignoring timer_rate as we had a TSC wrap around start=%lu >=post_end=%lu\n" , start, post_end);if (start < post_end && pre_start !=0 && pre_end !=0 && (timer_rate_max - timer_rate_min) < (timer_rate_max >>3 )) {
@@ -134,14 +134,12 @@ static unsigned long calibrate_delay_direct(void) good_timer_count =0 ;if ((measured_times[max] - estimate) < (estimate - measured_times[min])) { -printk (KERN_NOTICE "calibrate_delay_direct() dropping " -"min bogoMips estimate %d = %lu\n" , +pr_notice ("calibrate_delay_direct() dropping min bogoMips estimate %d = %lu\n" , min, measured_times[min]); measured_times[min] =0 ; min = max; }else { -printk (KERN_NOTICE "calibrate_delay_direct() dropping " -"max bogoMips estimate %d = %lu\n" , +pr_notice ("calibrate_delay_direct() dropping max bogoMips estimate %d = %lu\n" , max, measured_times[max]); measured_times[max] =0 ; max = min;
@@ -160,9 +158,8 @@ static unsigned long calibrate_delay_direct(void) } -printk (KERN_NOTICE "calibrate_delay_direct() failed to get a good " -"estimate for loops_per_jiffy.\nProbably due to long platform " -"interrupts. Consider using \"lpj=\" boot option.\n" ); +pr_notice ("%s: failed to reasonably estimate loops_per_jiffy (long platform interrupts?) - perhaps use boot option 'lpj='\n" , + __func__);return 0 ; }#else
@@ -280,23 +277,19 @@ void calibrate_delay(void)if (per_cpu (cpu_loops_per_jiffy, this_cpu)) { lpj =per_cpu (cpu_loops_per_jiffy, this_cpu);if (!printed) -pr_info ("Calibrating delay loop (skipped) " -"already calibrated this CPU" ); +pr_info ("Calibrating delay loop (skipped) already calibrated this CPU" ); }else if (preset_lpj) { lpj = preset_lpj;if (!printed) -pr_info ("Calibrating delay loop (skipped) " -"preset value.. " ); +pr_info ("Calibrating delay loop (skipped) preset value.. " ); }else if ((!printed) && lpj_fine) { lpj = lpj_fine; -pr_info ("Calibrating delay loop (skipped), " -"value calculated using timer frequency.. " ); +pr_info ("Calibrating delay loop (skipped), value calculated using timer frequency.. " ); }else if ((lpj =calibrate_delay_is_known ())) { ; }else if ((lpj =calibrate_delay_direct ()) !=0 ) {if (!printed) -pr_info ("Calibrating delay using timer " -"specific routine.. " ); +pr_info ("Calibrating delay using timer specific routine.. " ); }else {if (!printed)pr_info ("Calibrating delay loop... " );
--
1.9.1
Wanted to bump this patch, as nothing has happened in a long time.
As this is my first linux patch, I was quite hoping to get it accepted :)
Quoted 110 lines · Rasmus Wriedt Larsen
* fix multiple quoted string split across lines style issues
* change printk(KERN_NOTICE topr_notice
* insert spaces after , in function call
* change two linepr_noticemsg to one line (credit: Joe Perches)Signed-off-by Rasmus Wriedt Larsen <[email protected]>--- init/calibrate.c | 35 ++++++++++++++--------------------- 1 file changed, 14 insertions(+), 21 deletions(-)init/calibrate.c +14
-22@@ -15,7 +15,7 @@ unsigned long lpj_fine;unsigned long preset_lpj;static int __init lpj_setup (char *str) { - preset_lpj =simple_strtoul (str,NULL ,0 ); + preset_lpj =simple_strtoul (str,NULL ,0 );return 1 ; }@@ -40,11 +40,13 @@ static unsigned long calibrate_delay_direct(void)unsigned long good_timer_sum =0 ;unsigned long good_timer_count =0 ;unsigned long measured_times[MAX_DIRECT_CALIBRATION_RETRIES ]; -int max =-1 ;/* index of measured_times with max/min values or not set */ + +/* index of measured_times with max/min values or not set */ +int max =-1 ;int min =-1 ;int i; -if (read_current_timer (&pre_start) <0 ) +if (read_current_timer (&pre_start) <0 )return 0 ;/* @@ -95,9 +97,7 @@ static unsigned long calibrate_delay_direct(void)* >= 12.5% apart, redo calibration. */ if (start >= post_end) -printk (KERN_NOTICE "calibrate_delay_direct() ignoring " -"timer_rate as we had a TSC wrap around" -" start=%lu >=post_end=%lu\n" , +pr_notice ("calibrate_delay_direct() ignoring timer_rate as we had a TSC wrap around start=%lu >=post_end=%lu\n" , start, post_end);if (start < post_end && pre_start !=0 && pre_end !=0 && (timer_rate_max - timer_rate_min) < (timer_rate_max >>3 )) {@@ -134,14 +134,12 @@ static unsigned long calibrate_delay_direct(void) good_timer_count =0 ;if ((measured_times[max] - estimate) < (estimate - measured_times[min])) { -printk (KERN_NOTICE "calibrate_delay_direct() dropping " -"min bogoMips estimate %d = %lu\n" , +pr_notice ("calibrate_delay_direct() dropping min bogoMips estimate %d = %lu\n" , min, measured_times[min]); measured_times[min] =0 ; min = max; }else { -printk (KERN_NOTICE "calibrate_delay_direct() dropping " -"max bogoMips estimate %d = %lu\n" , +pr_notice ("calibrate_delay_direct() dropping max bogoMips estimate %d = %lu\n" , max, measured_times[max]); measured_times[max] =0 ; max = min;@@ -160,9 +158,8 @@ static unsigned long calibrate_delay_direct(void) } -printk (KERN_NOTICE "calibrate_delay_direct() failed to get a good " -"estimate for loops_per_jiffy.\nProbably due to long platform " -"interrupts. Consider using \"lpj=\" boot option.\n" ); +pr_notice ("%s: failed to reasonably estimate loops_per_jiffy (long platform interrupts?) - perhaps use boot option 'lpj='\n" , + __func__);return 0 ; }#else @@ -280,23 +277,19 @@ void calibrate_delay(void)if (per_cpu (cpu_loops_per_jiffy, this_cpu)) { lpj =per_cpu (cpu_loops_per_jiffy, this_cpu);if (!printed) -pr_info ("Calibrating delay loop (skipped) " -"already calibrated this CPU" ); +pr_info ("Calibrating delay loop (skipped) already calibrated this CPU" ); }else if (preset_lpj) { lpj = preset_lpj;if (!printed) -pr_info ("Calibrating delay loop (skipped) " -"preset value.. " ); +pr_info ("Calibrating delay loop (skipped) preset value.. " ); }else if ((!printed) && lpj_fine) { lpj = lpj_fine; -pr_info ("Calibrating delay loop (skipped), " -"value calculated using timer frequency.. " ); +pr_info ("Calibrating delay loop (skipped), value calculated using timer frequency.. " ); }else if ((lpj =calibrate_delay_is_known ())) { ; }else if ((lpj =calibrate_delay_direct ()) !=0 ) {if (!printed) -pr_info ("Calibrating delay using timer " -"specific routine.. " ); +pr_info ("Calibrating delay using timer specific routine.. " ); }else {if (!printed)pr_info ("Calibrating delay loop... " ); --1.9.1
Quoted 1 line · Rasmus Wriedt Larsen
Wanted to bump this patch, as nothing has happened in a long time.
Maybe you need to expand the recipient list. Andrew Morton sometimes picks up patches like this. Sometimes Jiri Kosina, the trivial maintainer, does. Both have been added to the recipient list here.
Quoted 110 lines
As this is my first linux patch, I was quite hoping to get it accepted :)
Quoted 107 lines · Rasmus Wriedt Larsen
* fix multiple quoted string split across lines style issues
* change printk(KERN_NOTICE topr_notice
* insert spaces after , in function call
* change two linepr_noticemsg to one line (credit: Joe Perches)Signed-off-by Rasmus Wriedt Larsen <[email protected]>--- init/calibrate.c | 35 ++++++++++++++--------------------- 1 file changed, 14 insertions(+), 21 deletions(-)init/calibrate.c +14
-21@@ -15,7 +15,7 @@ unsigned long lpj_fine;unsigned long preset_lpj;static int __init lpj_setup (char *str) { - preset_lpj =simple_strtoul (str,NULL ,0 ); + preset_lpj =simple_strtoul (str,NULL ,0 );return 1 ; }@@ -40,11 +40,13 @@ static unsigned long calibrate_delay_direct(void)unsigned long good_timer_sum =0 ;unsigned long good_timer_count =0 ;unsigned long measured_times[MAX_DIRECT_CALIBRATION_RETRIES ]; -int max =-1 ;/* index of measured_times with max/min values or not set */ + +/* index of measured_times with max/min values or not set */ +int max =-1 ;int min =-1 ;int i; -if (read_current_timer (&pre_start) <0 ) +if (read_current_timer (&pre_start) <0 )return 0 ;/* @@ -95,9 +97,7 @@ static unsigned long calibrate_delay_direct(void)* >= 12.5% apart, redo calibration. */ if (start >= post_end) -printk (KERN_NOTICE "calibrate_delay_direct() ignoring " -"timer_rate as we had a TSC wrap around" -" start=%lu >=post_end=%lu\n" , +pr_notice ("calibrate_delay_direct() ignoring timer_rate as we had a TSC wrap around start=%lu >=post_end=%lu\n" , start, post_end);if (start < post_end && pre_start !=0 && pre_end !=0 && (timer_rate_max - timer_rate_min) < (timer_rate_max >>3 )) {@@ -134,14 +134,12 @@ static unsigned long calibrate_delay_direct(void) good_timer_count =0 ;if ((measured_times[max] - estimate) < (estimate - measured_times[min])) { -printk (KERN_NOTICE "calibrate_delay_direct() dropping " -"min bogoMips estimate %d = %lu\n" , +pr_notice ("calibrate_delay_direct() dropping min bogoMips estimate %d = %lu\n" , min, measured_times[min]); measured_times[min] =0 ; min = max; }else { -printk (KERN_NOTICE "calibrate_delay_direct() dropping " -"max bogoMips estimate %d = %lu\n" , +pr_notice ("calibrate_delay_direct() dropping max bogoMips estimate %d = %lu\n" , max, measured_times[max]); measured_times[max] =0 ; max = min;@@ -160,9 +158,8 @@ static unsigned long calibrate_delay_direct(void) } -printk (KERN_NOTICE "calibrate_delay_direct() failed to get a good " -"estimate for loops_per_jiffy.\nProbably due to long platform " -"interrupts. Consider using \"lpj=\" boot option.\n" ); +pr_notice ("%s: failed to reasonably estimate loops_per_jiffy (long platform interrupts?) - perhaps use boot option 'lpj='\n" , + __func__);return 0 ; }#else @@ -280,23 +277,19 @@ void calibrate_delay(void)if (per_cpu (cpu_loops_per_jiffy, this_cpu)) { lpj =per_cpu (cpu_loops_per_jiffy, this_cpu);if (!printed) -pr_info ("Calibrating delay loop (skipped) " -"already calibrated this CPU" ); +pr_info ("Calibrating delay loop (skipped) already calibrated this CPU" ); }else if (preset_lpj) { lpj = preset_lpj;if (!printed) -pr_info ("Calibrating delay loop (skipped) " -"preset value.. " ); +pr_info ("Calibrating delay loop (skipped) preset value.. " ); }else if ((!printed) && lpj_fine) { lpj = lpj_fine; -pr_info ("Calibrating delay loop (skipped), " -"value calculated using timer frequency.. " ); +pr_info ("Calibrating delay loop (skipped), value calculated using timer frequency.. " ); }else if ((lpj =calibrate_delay_is_known ())) { ; }else if ((lpj =calibrate_delay_direct ()) !=0 ) {if (!printed) -pr_info ("Calibrating delay using timer " -"specific routine.. " ); +pr_info ("Calibrating delay using timer specific routine.. " ); }else {if (!printed)pr_info ("Calibrating delay loop... " );