powerpc/8xx: Optimise MMU TLB handling and add support of 16k pages
v3 cover powerpc/8xx: Optimise MMU TLB handling and add support of 16k pages
This patchset:
1) provides several MMU TLB handling optimisation on MPC8xx.
2) adds support of 16k pages on MPC8xx.
All changes have been successfully tested on a custom board equipped with MPC885
---
Changes in v2:
- Patch number 10 removed, it was implementing a 16 bit alignment of the PGDIR. It is not worth potentially wasting up to 64k of memory just for removing one instruction (ori).
- Preserve r11 while calculating the level 2 address, therefore no more need to save r11 into CR.
Changes in v3:
- Few fixes following review from Joachim Tjernlund
- Removed the major hack which was saving resisters in memory for CPU6 errata
- Invalidating non present TLB entries earlier (in head_8xx instead of fault.c)
arch/powerpc/Kconfig | 2 +- arch/powerpc/include/asm/mmu-8xx.h | 2 + arch/powerpc/include/asm/pgtable-ppc32.h | 20 ++ arch/powerpc/include/asm/pte-8xx.h | 7 +- arch/powerpc/include/asm/reg.h | 3 +- arch/powerpc/kernel/head_8xx.S | 370 ++++++++++++------------- arch/powerpc/mm/fault.c | 9 +- 7 files changed, 203 insertions(+), 210 deletions(-)
Quoted 7 lines · Christophe Leroy
This patchset:
1) provides several MMU TLB handling optimisation on MPC8xx.
2) adds support of 16k pages on MPC8xx.
All changes have been successfully tested on a custom board equipped with MPC885Signed-off-by Christophe Leroy <[email protected]>Tested-by Christophe Leroy <[email protected]>
I've already applied patches 1, 2, 4, 5, 6, 9, and 10 from the previous patchset -- have they changed?
-Scott
Quoted 6 lines · Scott Wood
Quoted 5 lines · Christophe Leroy
This patchset:
1) provides several MMU TLB handling optimisation on MPC8xx.
2) adds support of 16k pages on MPC8xx.
All changes have been successfully tested on a custom board equipped with MPC885
Quoted 7 lines
Quoted 2 lines
Signed-off-by Christophe Leroy <[email protected]>Tested-by Christophe Leroy <[email protected]>I've already applied patches 1, 2, 4, 5, 6, 9, and 10 from the previous patchset -- have they changed?
-Scott
No, only 3, 7, 17 are changed, and 20,21 are new.
I didn't notice you already applied some. How should I then proceed now for the remaining ones ? Submit a new set ?
Thanks
Christophe
---
Ce courrier électronique ne contient aucun virus ou logiciel malveillant parce que la protection avast! Antivirus est active.
http://www.avast.com
Quoted 9 lines · christophe leroy
Quoted 8 lines · Scott Wood
Quoted 7 lines · Christophe Leroy
This patchset:
1) provides several MMU TLB handling optimisation on MPC8xx.
2) adds support of 16k pages on MPC8xx.
All changes have been successfully tested on a custom board equipped with MPC885Signed-off-by Christophe Leroy <[email protected]>Tested-by Christophe Leroy <[email protected]>
Quoted 9 lines
Quoted 5 lines
I've already applied patches 1, 2, 4, 5, 6, 9, and 10 from the previous patchset -- have they changed?
-Scott
No, only 3, 7, 17 are changed, and 20,21 are new.
I didn't notice you already applied some. How should I then proceed now for the remaining ones ? Submit a new set ?
No, I'll just skip the ones I've already applied.
-Scott
Quoted 13 lines · Scott Wood
Quoted 12 lines · christophe leroy
Quoted 11 lines · Scott Wood
Quoted 7 lines · Christophe Leroy
This patchset:
1) provides several MMU TLB handling optimisation on MPC8xx.
2) adds support of 16k pages on MPC8xx.
All changes have been successfully tested on a custom board equipped with MPC885Signed-off-by Christophe Leroy <[email protected]>Tested-by Christophe Leroy <[email protected]>I've already applied patches 1, 2, 4, 5, 6, 9, and 10 from the previous patchset -- have they changed?
Quoted 9 lines
Quoted 6 lines
Quoted 2 lines
-Scott
No, only 3, 7, 17 are changed, and 20,21 are new.
I didn't notice you already applied some. How should I then proceed now for the remaining ones ? Submit a new set ?No, I'll just skip the ones I've already applied.
I think I took into account all Joakim's and your's comments in v4. Since I submitted v4, I think I didn't get any new comment. What's the way forward to get the remaining ones applied ?
Christophe
Quoted 20 lines · leroy christophe
Quoted 19 lines · Scott Wood
Quoted 18 lines · christophe leroy
Quoted 6 lines · Scott Wood
Quoted 5 lines · Christophe Leroy
This patchset:
1) provides several MMU TLB handling optimisation on MPC8xx.
2) adds support of 16k pages on MPC8xx.
All changes have been successfully tested on a custom board equipped with MPC885Quoted 7 lines
Quoted 2 lines
Signed-off-by Christophe Leroy <[email protected]>Tested-by Christophe Leroy <[email protected]>I've already applied patches 1, 2, 4, 5, 6, 9, and 10 from the previous patchset -- have they changed?
-Scott
No, only 3, 7, 17 are changed, and 20,21 are new.
I didn't notice you already applied some. How should I then proceed now for the remaining ones ? Submit a new set ?
Quoted 6 lines
Quoted 3 lines
No, I'll just skip the ones I've already applied.
I think I took into account all Joakim's and your's comments in v4. Since I submitted v4, I think I didn't get any new comment. What's the way forward to get the remaining ones applied ?
I haven't had a chance to review v4 yet. I'm currently at conferences and will be on vacation next week, but I will try to look at them soon after that.
-Scott