Skip to contentSkip to conversation

usb: ehci-hcd: Correct CLEAR_FEATURE code

PATCH Applied Dmitry Voytik 2 participants 2 messages Oct 16, 2014 – Oct 21, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 usb: ehci-hcd: Correct CLEAR_FEATURE code

This commit broke USB on olinuxino board:

87b9bea USB: host: hub: Use usb_hub_power_on from U-Boot

This patch was ported from U-Boot with small changes. See discussion:
http://lists.denx.de/pipermail/u-boot/2013-May/153920.html

The root cause seems to be a missing mask and missing 'break' in ehci-hcd.c. Fix both.

---
 drivers/usb/host/ehci-hcd.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/usb/host/ehci-hcd.c +6 -4
index 5624552..d2e1296 100644
@@ -675,21 +675,23 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
 		break;
 	case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
 		reg = ehci_readl(status_reg);
+		reg &= ~EHCI_PS_CLEAR;
 		switch (le16_to_cpu(req->value)) {
 		case USB_PORT_FEAT_ENABLE:
 			reg &= ~EHCI_PS_PE;
 			break;
 		case USB_PORT_FEAT_C_ENABLE:
-			reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_PE;
+			reg |= EHCI_PS_PEC;
 			break;
 		case USB_PORT_FEAT_POWER:
 			if (HCS_PPC(ehci_readl(&ehci->hccr->cr_hcsparams)))
-				reg = reg & ~(EHCI_PS_CLEAR | EHCI_PS_PP);
+				reg &= ~ EHCI_PS_PP;
+			break;
 		case USB_PORT_FEAT_C_CONNECTION:
-			reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_CSC;
+			reg |= EHCI_PS_CSC;
 			break;
 		case USB_PORT_FEAT_OVER_CURRENT:
-			reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_OCC;
+			reg |= EHCI_PS_OCC;
 			break;
 		case USB_PORT_FEAT_C_RESET:
 			ehci->portreset &= ~(1 << le16_to_cpu(req->index));
Signature · 7 lines
1.9.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Applied
#1 lore raw
Quoted 11 lines · Dmitry Voytik

This commit broke USB on olinuxino board:

87b9bea USB: host: hub: Use usb_hub_power_on from U-Boot

This patch was ported from U-Boot with small changes. See discussion:
http://lists.denx.de/pipermail/u-boot/2013-May/153920.html

The root cause seems to be a missing mask and missing 'break' in ehci-hcd.c. Fix both.

Applied, thanks

Sascha

Quoted 40 lines
---
 drivers/usb/host/ehci-hcd.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/usb/host/ehci-hcd.c +6 -4
index 5624552..d2e1296 100644
@@ -675,21 +675,23 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
 		break;
 	case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
 		reg = ehci_readl(status_reg);
+		reg &= ~EHCI_PS_CLEAR;
 		switch (le16_to_cpu(req->value)) {
 		case USB_PORT_FEAT_ENABLE:
 			reg &= ~EHCI_PS_PE;
 			break;
 		case USB_PORT_FEAT_C_ENABLE:
-			reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_PE;
+			reg |= EHCI_PS_PEC;
 			break;
 		case USB_PORT_FEAT_POWER:
 			if (HCS_PPC(ehci_readl(&ehci->hccr->cr_hcsparams)))
-				reg = reg & ~(EHCI_PS_CLEAR | EHCI_PS_PP);
+				reg &= ~ EHCI_PS_PP;
+			break;
 		case USB_PORT_FEAT_C_CONNECTION:
-			reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_CSC;
+			reg |= EHCI_PS_CSC;
 			break;
 		case USB_PORT_FEAT_OVER_CURRENT:
-			reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_OCC;
+			reg |= EHCI_PS_OCC;
 			break;
 		case USB_PORT_FEAT_C_RESET:
 			ehci->portreset &= ~(1 << le16_to_cpu(req->index));
Signature · 1 line
1.9.1
Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox