drm/i915: Abort command parsing for chained batches
Subsystems (2)
PATCH 1/1 drm/i915: Abort command parsing for chained batches
From: Brad Volkin <[email protected]>
libva uses chained batch buffers in a way that the command parser can't generally handle. Fortunately, libva doesn't need to write registers from batch buffers in the way that mesa does, so this patch causes the driver to fall back to non-secure dispatch if the parser detects a chained batch buffer.
Testcase: igt/gem_exec_parse/chained-batch
--- drivers/gpu/drm/i915/i915_cmd_parser.c | 18 +++++++++++++++++- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 24 +++++++++++++----------- 2 files changed, 30 insertions(+), 12 deletions(-)
drivers/gpu/drm/i915/i915_cmd_parser.c +17 -1
@@ -138,6 +138,11 @@ static const struct drm_i915_cmd_descriptor common_cmds[] = { .mask = MI_GLOBAL_GTT, .expected = 0, }}, ), +/* +* MI_BATCH_BUFFER_START requires some special handling. It's not +* really a 'skip' action but it doesn't seem like it's worth adding +* a new action. See i915_parse_cmds(). +*/ CMD( MI_BATCH_BUFFER_START, SMI, !F, 0xFF, S ), };
@@ -955,7 +960,8 @@ static bool check_cmd(const struct intel_engine_cs *ring,* Parses the specified batch buffer looking for privilege violations as * described in the overview. * -* Return: non-zero if the parser finds violations or otherwise fails +* Return: non-zero if the parser finds violations or otherwise fails; -EACCES +* if the batch appears legal but should use hardware parsing */ int i915_parse_cmds(struct intel_engine_cs *ring, struct drm_i915_gem_object *batch_obj,
@@ -1002,6 +1008,16 @@ int i915_parse_cmds(struct intel_engine_cs *ring,break ; } +/* +* If the batch buffer contains a chained batch, return an +* error that tells the caller to abort and dispatch the +* workload as a non-secure batch. +*/ +if (desc->cmd.value ==MI_BATCH_BUFFER_START ) { + ret = -EACCES ; +break ; + } +if (desc->flags &CMD_DESC_FIXED ) length = desc->length.fixed;else
drivers/gpu/drm/i915/i915_gem_execbuffer.c +13 -11
@@ -1368,17 +1368,19 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, batch_obj, args->batch_start_offset, file->is_master); -if (ret) - goto err; - -/* -* XXX: Actually do this when enabling batch copy... -* -* Set the DISPATCH_SECURE bit to remove the NON_SECURE bit -* from MI_BATCH_BUFFER_START commands issued in the -* dispatch_execbuffer implementations. We specifically don't -* want that set when the command parser is enabled. -*/ +if (ret) { +if (ret != -EACCES ) + goto err; + }else { +/* +* XXX: Actually do this when enabling batch copy... +* +* Set the DISPATCH_SECURE bit to remove the NON_SECURE bit +* from MI_BATCH_BUFFER_START commands issued in the +* dispatch_execbuffer implementations. We specifically don't +* want that set when the command parser is enabled. +*/ + } }/* snb/ivb/vlv conflate the "batch in ppgtt" bit with the "non-secure
Signature · 1 line
1.9.1
Re: [PATCH] drm/i915: Abort command parsing for chained
-------------------------------------Summary-------------------------------------
Platform: baseline_drm_intel_nightly_pass_rate->patch_applied_pass_rate
BYT: pass/total=271/271->270/271
PNV: pass/total=269/271->271/271
ILK: pass/total=269/271->271/271
IVB: pass/total=271/271->271/271
SNB: pass/total=271/271->271/271
HSW: pass/total=271/271->271/271
BDW: pass/total=270/271->271/271 -------------------------------------Detailed-------------------------------------test_platform: test_suite, test_case, result_with_drm_intel_nightly->result_with_patch_applied
BYT: Intel_gpu_tools, igt_gem_concurrent_blit_gttX-bcs-gpu-read-after-write-interruptible, PASS->DMESG_WARN
PNV: Intel_gpu_tools, igt_gem_concurrent_blit_gtt-bcs-gpu-read-after-write-forked, TIMEOUT->PASS
PNV: Intel_gpu_tools, igt_gem_concurrent_blit_gttX-bcs-gpu-read-after-write-forked, TIMEOUT->PASS
ILK: Intel_gpu_tools, igt_kms_pipe_crc_basic_bad-nb-words-3, DMESG_WARN->PASS
ILK: Intel_gpu_tools, igt_kms_setmode_invalid-clone-single-crtc, DMESG_WARN->PASS
BDW: Intel_gpu_tools, igt_drv_missed_irq_hang, DMESG_WARN->PASS
Quoted 80 lines · On Thu, Oct 16, 2014 at 12:24:42PM -0700, [email protected] wrote:
From: Brad Volkin <[email protected]>
libva uses chained batch buffers in a way that the command parser can't generally handle. Fortunately, libva doesn't need to write registers from batch buffers in the way that mesa does, so this patch causes the driver to fall back to non-secure dispatch if the parser detects a chained batch buffer.
Testcase: igt/gem_exec_parse/chained-batch
Signed-off-by Brad Volkin <[email protected]>--- drivers/gpu/drm/i915/i915_cmd_parser.c | 18 +++++++++++++++++- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 24 +++++++++++++----------- 2 files changed, 30 insertions(+), 12 deletions(-)drivers/gpu/drm/i915/i915_cmd_parser.c +17
-1@@ -138,6 +138,11 @@ static const struct drm_i915_cmd_descriptor common_cmds[] = { .mask = MI_GLOBAL_GTT, .expected = 0, }}, ), +/* +* MI_BATCH_BUFFER_START requires some special handling. It's not +* really a 'skip' action but it doesn't seem like it's worth adding +* a new action. See i915_parse_cmds(). +*/ CMD( MI_BATCH_BUFFER_START, SMI, !F, 0xFF, S ), };@@ -955,7 +960,8 @@ static bool check_cmd(const struct intel_engine_cs *ring,* Parses the specified batch buffer looking for privilege violations as * described in the overview. * -* Return: non-zero if the parser finds violations or otherwise fails +* Return: non-zero if the parser finds violations or otherwise fails; -EACCES +* if the batch appears legal but should use hardware parsing */ int i915_parse_cmds(struct intel_engine_cs *ring, struct drm_i915_gem_object *batch_obj,@@ -1002,6 +1008,16 @@ int i915_parse_cmds(struct intel_engine_cs *ring,break ; } +/* +* If the batch buffer contains a chained batch, return an +* error that tells the caller to abort and dispatch the +* workload as a non-secure batch. +*/ +if (desc->cmd.value ==MI_BATCH_BUFFER_START ) { + ret = -EACCES ; +break ; + } +if (desc->flags &CMD_DESC_FIXED ) length = desc->length.fixed;else drivers/gpu/drm/i915/i915_gem_execbuffer.c +3
-11@@ -1368,17 +1368,19 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, batch_obj, args->batch_start_offset, file->is_master); -if (ret) - goto err; - -/* -* XXX: Actually do this when enabling batch copy... -* -* Set the DISPATCH_SECURE bit to remove the NON_SECURE bit -* from MI_BATCH_BUFFER_START commands issued in the -* dispatch_execbuffer implementations. We specifically don't -* want that set when the command parser is enabled. -*/ +if (ret) { +if (ret != -EACCES ) + goto err;
drivers/gpu/drm/i915/i915_gem_execbuffer.c i915_gem_do_execbuffer(struct drm_device *dev, void *data, · line 1383
Quoted 10 lines
drivers/gpu/drm/i915/i915_gem_execbuffer.c +10
-0+ }else { +/* +* XXX: Actually do this when enabling batch copy... +* +* Set the DISPATCH_SECURE bit to remove the NON_SECURE bit +* from MI_BATCH_BUFFER_START commands issued in the +* dispatch_execbuffer implementations. We specifically don't +* want that set when the command parser is enabled. +*/ + }
Tbh this hunk here confuses me ... Why do we need to change anything here?
And since we we currently scan batches unconditionally: Shouldn't we filter out the -EACCESS at a higher level?
In the end I imagine the logic will be:
a) Userspace asks for secure batch
-> Scan and reject or copy and run.
b) Userspace asks for normal batch
-> Don't scan, but run without additional hw privs.
Or am I again completely missing the point?
Thanks, Daniel
Quoted 10 lines
drivers/gpu/drm/i915/i915_gem_execbuffer.c +0
-0}/* snb/ivb/vlv conflate the "batch in ppgtt" bit with the "non-secure Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
[snip]
Quoted 27 lines · Daniel Vetter
Quoted 26 lines · On Thu, Oct 16, 2014 at 12:24:42PM -0700, [email protected] wrote:
drivers/gpu/drm/i915/i915_gem_execbuffer.c +7
-11@@ -1368,17 +1368,19 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, batch_obj, args->batch_start_offset, file->is_master); -if (ret) - goto err; - -/* -* XXX: Actually do this when enabling batch copy... -* -* Set the DISPATCH_SECURE bit to remove the NON_SECURE bit -* from MI_BATCH_BUFFER_START commands issued in the -* dispatch_execbuffer implementations. We specifically don't -* want that set when the command parser is enabled. -*/ +if (ret) { +if (ret != -EACCES ) + goto err; + }else { +/* +* XXX: Actually do this when enabling batch copy... +*
Quoted 8 lines
drivers/gpu/drm/i915/i915_gem_execbuffer.c i915_gem_do_execbuffer(struct drm_device *dev, void *data, · line 1383
Quoted 6 lines
drivers/gpu/drm/i915/i915_gem_execbuffer.c +6
-0+* Set the DISPATCH_SECURE bit to remove the NON_SECURE bit +* from MI_BATCH_BUFFER_START commands issued in the +* dispatch_execbuffer implementations. We specifically don't +* want that set when the command parser is enabled. +*/ + }Tbh this hunk here confuses me ... Why do we need to change anything here?
Yeah, it makes more sense with the batch copy code, it's just that this patch has to go in before the patch where we set I915_DISPATCH_SECURE. The final logic basically goes like this:
ret = i915_parse_cmds()
if ret == 0
dispatch shadow_batch_obj, flags = I915_DISPATCH_SECURE
else if ret == -EACCES // i.e. i915_parse_cmds() found an MI_BB_S
dispatch batch_obj, flags = 0
else
return error
The point is that there's a restriction that chained batches must have the AddressSpace bit set to the same value as the parent batch (i.e. GGTT when batch copy is present). But because of the way libva uses chained batches we can't parse or copy the chained batch to safely put it into GGTT. So we fall back to dispatching the userspace-supplied batch from PPGTT. I should probably have mentioned this restriction in the commit message.
As you suggest below, we could instead start to conditionally check batches based on the flag from userspace. However, I thought we had decided not to take that approach in general. Mesa already implements all of the code that they need the command parser for, with a runtime check as to whether hardware will nop their LRI, etc commands. So if we run the parser on all batches, then once we switch to enabling mode features magically work for them. Also, the I915_EXEC_SECURE flag is currently root-only, so there's a bit of a semantic/API/whatever change that we'd have to make there, or add a new flag I suppose. Maybe not a big deal, but I think that the choice of running the parser on all batches is the right direction.
Brad
Quoted 30 lines
And since we we currently scan batches unconditionally: Shouldn't we filter out the
-EACCESSat a higher level?In the end I imagine the logic will be:
a) Userspace asks for secure batch
-> Scan and reject or copy and run.
b) Userspace asks for normal batch
-> Don't scan, but run without additional hw privs.Or am I again completely missing the point?
Thanks, Daniel
Quoted 10 lines
drivers/gpu/drm/i915/i915_gem_execbuffer.c +0
-0}/* snb/ivb/vlv conflate the "batch in ppgtt" bit with the "non-secure Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfxSignature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Quoted 51 lines · Bradley D
[snip]
Quoted 27 lines · Daniel Vetter
Quoted 26 lines · On Thu, Oct 16, 2014 at 12:24:42PM -0700, [email protected] wrote:
drivers/gpu/drm/i915/i915_gem_execbuffer.c +7
-11@@ -1368,17 +1368,19 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, batch_obj, args->batch_start_offset, file->is_master); -if (ret) - goto err; - -/* -* XXX: Actually do this when enabling batch copy... -* -* Set the DISPATCH_SECURE bit to remove the NON_SECURE bit -* from MI_BATCH_BUFFER_START commands issued in the -* dispatch_execbuffer implementations. We specifically don't -* want that set when the command parser is enabled. -*/ +if (ret) { +if (ret != -EACCES ) + goto err; + }else { +/* +* XXX: Actually do this when enabling batch copy... +* Quoted 8 lines
drivers/gpu/drm/i915/i915_gem_execbuffer.c i915_gem_do_execbuffer(struct drm_device *dev, void *data, · line 1383
Quoted 6 lines
drivers/gpu/drm/i915/i915_gem_execbuffer.c +6
-0+* Set the DISPATCH_SECURE bit to remove the NON_SECURE bit +* from MI_BATCH_BUFFER_START commands issued in the +* dispatch_execbuffer implementations. We specifically don't +* want that set when the command parser is enabled. +*/ + }Tbh this hunk here confuses me ... Why do we need to change anything here?
Yeah, it makes more sense with the batch copy code, it's just that this patch has to go in before the patch where we set
I915_DISPATCH_SECURE. The final logic basically goes like this:ret =
i915_parse_cmds()
if ret == 0
dispatchshadow_batch_obj, flags =I915_DISPATCH_SECURE
else if ret ==-EACCES// i.e.i915_parse_cmds()found anMI_BB_S
dispatchbatch_obj, flags = 0
else
return error
Quoted 7 lines
The point is that there's a restriction that chained batches must have the AddressSpace bit set to the same value as the parent batch (i.e. GGTT when batch copy is present). But because of the way libva uses chained batches we can't parse or copy the chained batch to safely put it into GGTT. So we fall back to dispatching the userspace-supplied batch from PPGTT. I should probably have mentioned this restriction in the commit message.
Yeah I've figured that this makes more sense with the actual batch copy. Hence the suggestion to just leave out this hunk for now - that shouldn't have a functional impact at this stage if I'm not again blind?
Quoted 12 lines
As you suggest below, we could instead start to conditionally check batches based on the flag from userspace. However, I thought we had decided not to take that approach in general. Mesa already implements all of the code that they need the command parser for, with a runtime check as to whether hardware will nop their LRI, etc commands. So if we run the parser on all batches, then once we switch to enabling mode features magically work for them. Also, the
I915_EXEC_SECUREflag is currently root-only, so there's a bit of a semantic/API/whatever change that we'd have to make there, or add a new flag I suppose. Maybe not a big deal, but I think that the choice of running the parser on all batches is the right direction.
Hm yeah, that's a good reason to just go ahead. If people still hate the overhead too much we can just add more flags to execbuf ;-) -Daniel
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Quoted 60 lines · Daniel Vetter
Quoted 51 lines · Bradley D
[snip]
Quoted 27 lines · Daniel Vetter
Quoted 26 lines · On Thu, Oct 16, 2014 at 12:24:42PM -0700, [email protected] wrote:
drivers/gpu/drm/i915/i915_gem_execbuffer.c +7
-11@@ -1368,17 +1368,19 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, batch_obj, args->batch_start_offset, file->is_master); -if (ret) - goto err; - -/* -* XXX: Actually do this when enabling batch copy... -* -* Set the DISPATCH_SECURE bit to remove the NON_SECURE bit -* from MI_BATCH_BUFFER_START commands issued in the -* dispatch_execbuffer implementations. We specifically don't -* want that set when the command parser is enabled. -*/ +if (ret) { +if (ret != -EACCES ) + goto err; + }else { +/* +* XXX: Actually do this when enabling batch copy... +* Quoted 8 lines
drivers/gpu/drm/i915/i915_gem_execbuffer.c i915_gem_do_execbuffer(struct drm_device *dev, void *data, · line 1383
Quoted 6 lines
drivers/gpu/drm/i915/i915_gem_execbuffer.c +6
-0+* Set the DISPATCH_SECURE bit to remove the NON_SECURE bit +* from MI_BATCH_BUFFER_START commands issued in the +* dispatch_execbuffer implementations. We specifically don't +* want that set when the command parser is enabled. +*/ + }Tbh this hunk here confuses me ... Why do we need to change anything here?
Yeah, it makes more sense with the batch copy code, it's just that this patch has to go in before the patch where we set
I915_DISPATCH_SECURE. The final logic basically goes like this:ret =
i915_parse_cmds()
if ret == 0
dispatchshadow_batch_obj, flags =I915_DISPATCH_SECURE
else if ret ==-EACCES// i.e.i915_parse_cmds()found anMI_BB_S
dispatchbatch_obj, flags = 0
else
return errorQuoted 7 lines
The point is that there's a restriction that chained batches must have the AddressSpace bit set to the same value as the parent batch (i.e. GGTT when batch copy is present). But because of the way libva uses chained batches we can't parse or copy the chained batch to safely put it into GGTT. So we fall back to dispatching the userspace-supplied batch from PPGTT. I should probably have mentioned this restriction in the commit message.
Quoted 3 lines
Yeah I've figured that this makes more sense with the actual batch copy. Hence the suggestion to just leave out this hunk for now - that shouldn't have a functional impact at this stage if I'm not again blind?
Oh, I see. Yeah, we can probably leave this part out of this patch and just put it in with batch copy. I'll do a quick test and send an updated patch if it looks good.
Brad
Quoted 20 lines
Quoted 12 lines
As you suggest below, we could instead start to conditionally check batches based on the flag from userspace. However, I thought we had decided not to take that approach in general. Mesa already implements all of the code that they need the command parser for, with a runtime check as to whether hardware will nop their LRI, etc commands. So if we run the parser on all batches, then once we switch to enabling mode features magically work for them. Also, the
I915_EXEC_SECUREflag is currently root-only, so there's a bit of a semantic/API/whatever change that we'd have to make there, or add a new flag I suppose. Maybe not a big deal, but I think that the choice of running the parser on all batches is the right direction.Hm yeah, that's a good reason to just go ahead. If people still hate the overhead too much we can just add more flags to execbuf ;-) -Daniel
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Quoted 61 lines · Bradley D
Quoted 60 lines · Daniel Vetter
Quoted 58 lines · Bradley D
[snip]
Quoted 27 lines · Daniel Vetter
Quoted 26 lines · On Thu, Oct 16, 2014 at 12:24:42PM -0700, [email protected] wrote:
drivers/gpu/drm/i915/i915_gem_execbuffer.c +7
-11@@ -1368,17 +1368,19 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, batch_obj, args->batch_start_offset, file->is_master); -if (ret) - goto err; - -/* -* XXX: Actually do this when enabling batch copy... -* -* Set the DISPATCH_SECURE bit to remove the NON_SECURE bit -* from MI_BATCH_BUFFER_START commands issued in the -* dispatch_execbuffer implementations. We specifically don't -* want that set when the command parser is enabled. -*/ +if (ret) { +if (ret != -EACCES ) + goto err; + }else { +/* +* XXX: Actually do this when enabling batch copy... +* Quoted 8 lines
drivers/gpu/drm/i915/i915_gem_execbuffer.c i915_gem_do_execbuffer(struct drm_device *dev, void *data, · line 1383
Quoted 6 lines
drivers/gpu/drm/i915/i915_gem_execbuffer.c +6
-0+* Set the DISPATCH_SECURE bit to remove the NON_SECURE bit +* from MI_BATCH_BUFFER_START commands issued in the +* dispatch_execbuffer implementations. We specifically don't +* want that set when the command parser is enabled. +*/ + }Tbh this hunk here confuses me ... Why do we need to change anything here?
Yeah, it makes more sense with the batch copy code, it's just that this patch has to go in before the patch where we set
I915_DISPATCH_SECURE. The final logic basically goes like this:ret =
i915_parse_cmds()
if ret == 0
dispatchshadow_batch_obj, flags =I915_DISPATCH_SECURE
else if ret ==-EACCES// i.e.i915_parse_cmds()found anMI_BB_S
dispatchbatch_obj, flags = 0
else
return errorThe point is that there's a restriction that chained batches must have the AddressSpace bit set to the same value as the parent batch (i.e. GGTT when batch copy is present). But because of the way libva uses chained batches we can't parse or copy the chained batch to safely put it into GGTT. So we fall back to dispatching the userspace-supplied batch from PPGTT. I should probably have mentioned this restriction in the commit message.
Quoted 7 lines
Quoted 3 lines
Yeah I've figured that this makes more sense with the actual batch copy. Hence the suggestion to just leave out this hunk for now - that shouldn't have a functional impact at this stage if I'm not again blind?
Oh, I see. Yeah, we can probably leave this part out of this patch and just put it in with batch copy. I'll do a quick test and send an updated patch if it looks good.
I take that back. Reading this again, with appropriate levels of coffee in my system this time :), there is a functional impact to this hunk.
We need the
if (ret) {
if (ret != -EACCES)
goto err;
}piece because i915_parse_cmds() will now return -EACCES for libva batches. If we don't filter -EACCES and instead propagate the error, we're basically rejecting all of their batches. Not exactly what we wanted. Beyond that, yes the other behavioral differences only come in with the batch copy series.
We obviously don't need the empty else clause though. So if you agree with the patch otherwise then I'd say frob the else clause however you like when applying and I'll rebase the batch copy patches as needed. I'd prefer that you leave the -EACCES filter as written though because the final logic is
if ret {
if -EACCES
else
} else {
}Thanks,
Brad
Quoted 80 lines · Bradley D
Quoted 61 lines · Bradley D
Quoted 60 lines · Daniel Vetter
Quoted 58 lines · Bradley D
[snip]
Quoted 27 lines · Daniel Vetter
Quoted 26 lines · On Thu, Oct 16, 2014 at 12:24:42PM -0700, [email protected] wrote:
drivers/gpu/drm/i915/i915_gem_execbuffer.c +7
-11@@ -1368,17 +1368,19 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, batch_obj, args->batch_start_offset, file->is_master); -if (ret) - goto err; - -/* -* XXX: Actually do this when enabling batch copy... -* -* Set the DISPATCH_SECURE bit to remove the NON_SECURE bit -* from MI_BATCH_BUFFER_START commands issued in the -* dispatch_execbuffer implementations. We specifically don't -* want that set when the command parser is enabled. -*/ +if (ret) { +if (ret != -EACCES ) + goto err; + }else { +/* +* XXX: Actually do this when enabling batch copy... +* Quoted 8 lines
drivers/gpu/drm/i915/i915_gem_execbuffer.c i915_gem_do_execbuffer(struct drm_device *dev, void *data, · line 1383
Quoted 6 lines
drivers/gpu/drm/i915/i915_gem_execbuffer.c +6
-0+* Set the DISPATCH_SECURE bit to remove the NON_SECURE bit +* from MI_BATCH_BUFFER_START commands issued in the +* dispatch_execbuffer implementations. We specifically don't +* want that set when the command parser is enabled. +*/ + }Tbh this hunk here confuses me ... Why do we need to change anything here?
Yeah, it makes more sense with the batch copy code, it's just that this patch has to go in before the patch where we set
I915_DISPATCH_SECURE. The final logic basically goes like this:ret =
i915_parse_cmds()
if ret == 0
dispatchshadow_batch_obj, flags =I915_DISPATCH_SECURE
else if ret ==-EACCES// i.e.i915_parse_cmds()found anMI_BB_S
dispatchbatch_obj, flags = 0
else
return errorThe point is that there's a restriction that chained batches must have the AddressSpace bit set to the same value as the parent batch (i.e. GGTT when batch copy is present). But because of the way libva uses chained batches we can't parse or copy the chained batch to safely put it into GGTT. So we fall back to dispatching the userspace-supplied batch from PPGTT. I should probably have mentioned this restriction in the commit message.
Quoted 7 lines
Quoted 3 lines
Yeah I've figured that this makes more sense with the actual batch copy. Hence the suggestion to just leave out this hunk for now - that shouldn't have a functional impact at this stage if I'm not again blind?
Oh, I see. Yeah, we can probably leave this part out of this patch and just put it in with batch copy. I'll do a quick test and send an updated patch if it looks good.
I take that back. Reading this again, with appropriate levels of coffee in my system this time :), there is a functional impact to this hunk.
We need the
if (ret) { if (ret != -EACCES) goto err; }
Quoted 4 lines
piece because
i915_parse_cmds()will now return-EACCESfor libva batches. If we don't filter-EACCESand instead propagate the error, we're basically rejecting all of their batches. Not exactly what we wanted. Beyond that, yes the other behavioral differences only come in with the batch copy series.
Oh indeed, now I see clearer ;-)
Quoted 10 lines
We obviously don't need the empty else clause though. So if you agree with the patch otherwise then I'd say frob the else clause however you like when applying and I'll rebase the batch copy patches as needed. I'd prefer that you leave the
-EACCESfilter as written though because the final logic isif ret { if -EACCES else } else { }
I've merged the patch as-is with an improved commit message to explain this a bit.
-Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx