i8k: Ignore temperature sensors which report invalid values
PATCH 1/1 i8k: Ignore temperature sensors which report invalid values
On some machines some temperature sensors report too high values which are invalid. When value is invalid function i8k_get_temp() returns previous value and at next call it returns I8K_MAX_TEMP.
With this patch also firt i8k_get_temp() call returns I8K_MAX_TEMP and i8k_init_hwmon() will ignore all sensor ids which report incorrect values.
--- drivers/char/i8k.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/char/i8k.c +5 -5
@@ -298,7 +298,7 @@ static int i8k_get_temp(int sensor)int temp;#ifdef I8K_TEMPERATURE_BUG -static int prev[4 ]; +static int prev[4 ] = {I8K_MAX_TEMP ,I8K_MAX_TEMP ,I8K_MAX_TEMP ,I8K_MAX_TEMP };#endif regs.ebx = sensor &0xff ; rc =i8k_smm (®s);
@@ -610,17 +610,17 @@ static int __init i8k_init_hwmon(void)/* CPU temperature attributes, if temperature reading is OK */ err =i8k_get_temp (0 ); -if (err >=0 ) +if (err >=0 && err <I8K_MAX_TEMP ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP1 ;/* check for additional temperature sensors */ err =i8k_get_temp (1 ); -if (err >=0 ) +if (err >=0 && err <I8K_MAX_TEMP ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP2 ; err =i8k_get_temp (2 ); -if (err >=0 ) +if (err >=0 && err <I8K_MAX_TEMP ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP3 ; err =i8k_get_temp (3 ); -if (err >=0 ) +if (err >=0 && err <I8K_MAX_TEMP ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP4 ;/* Left fan attributes, if left fan is present */
Signature · 1 line
1.7.9.5
Quoted 1 line · Pali Rohár
On some machines some temperature sensors report too high values which are
What is "too high", and what is "some machines" ?
Would be great if you can be more specific.
Quoted 4 lines
invalid. When value is invalid function
i8k_get_temp()returns previous value and at next call it returnsI8K_MAX_TEMP.With this patch also firt
i8k_get_temp()call returnsI8K_MAX_TEMPand
fix ? Also, I am not entirely sure I understand what exactly you are fixing here.
Quoted 12 lines
i8k_init_hwmon()will ignore all sensor ids which report incorrect values.Signed-off-by Pali Rohár <[email protected]>--- drivers/char/i8k.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)drivers/char/i8k.c +0
-0
drivers/char/i8k.c static int i8k_get_temp(int sensor) · line 301
Quoted 5 lines
drivers/char/i8k.c +1
-1@@ -298,7 +298,7 @@ static int i8k_get_temp(int sensor)int temp;#ifdef I8K_TEMPERATURE_BUG -static int prev[4 ]; +static int prev[4 ] = {I8K_MAX_TEMP ,I8K_MAX_TEMP ,I8K_MAX_TEMP ,I8K_MAX_TEMP };
I am not sure I understand what this change is expected to accomplish. Please explain.
drivers/char/i8k.c static int __init i8k_init_hwmon(void) · line 613
Quoted 9 lines
drivers/char/i8k.c +1
-1#endif regs.ebx = sensor &0xff ; rc =i8k_smm (®s);@@ -610,17 +610,17 @@ static int __init i8k_init_hwmon(void)/* CPU temperature attributes, if temperature reading is OK */ err =i8k_get_temp (0 ); -if (err >=0 ) +if (err >=0 && err <I8K_MAX_TEMP )
I8K_MAX_TEMP is, at least in theory, a valid temperature, so this should be "<=".
It would be important to understand what the "too high" temperature is to possibly be able to distinguish it from the buggy temperature that the code is trying to fix.
Thanks,
Guenter
Quoted 17 lines
drivers/char/i8k.c +3
-3i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP1 ;/* check for additional temperature sensors */ err =i8k_get_temp (1 ); -if (err >=0 ) +if (err >=0 && err <I8K_MAX_TEMP ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP2 ; err =i8k_get_temp (2 ); -if (err >=0 ) +if (err >=0 && err <I8K_MAX_TEMP ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP3 ; err =i8k_get_temp (3 ); -if (err >=0 ) +if (err >=0 && err <I8K_MAX_TEMP ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP4 ;/* Left fan attributes, if left fan is present */
Ok, I will describe my problem. Guenter, maybe you can find another solution/fix for it.
Calling i8k_get_temp(3) on my laptop without I8K_TEMPERATURE_BUG always returns value 193 (which is above I8K_MAX_TEMP).
When I8K_TEMPERATURE_BUG is enabled (by default) then i8k_get_temp(3) returns value from prev[3] and store new value I8K_TEMPERATURE_BUG to prev[3]. Value in prev[3] is initialized to 0.
What I want to achieve is: when i8k_get_temp() for particular sensor id always returns invalid value (> I8K_MAX_TEMP) then we should totally ignore sensor with that id and do not export it via hwmon.
My solution is: initialize prev[id] to I8K_MAX_TEMP, so on invalid data first call to i8k_get_temp(id) returns I8K_MAX_TEMP. Then in i8k_init_hwmon check if value is < I8K_MAX_TEMP and if not ignore sensor id.
Guenter, it is clear now? Are you ok that we should ignore sensor if always report value above I8K_MAX_TEMP? If you do not like my solution/patch for it, can you specify how other can it be fixed?
Quoted 91 lines · On Sunday 19 October 2014 17:13:29 Guenter Roeck wrote:
Quoted 2 lines · Pali Rohár
On some machines some temperature sensors report too high values which are
What is "too high", and what is "some machines" ? Would be great if you can be more specific.
Quoted 6 lines
invalid. When value is invalid function
i8k_get_temp()returns previous value and at next call it returnsI8K_MAX_TEMP.With this patch also firt
i8k_get_temp()call returnsI8K_MAX_TEMPandfix ? Also, I am not entirely sure I understand what exactly you are fixing here.
Quoted 14 lines
i8k_init_hwmon()will ignore all sensor ids which report incorrect values.Signed-off-by Pali Rohár <[email protected]>---
drivers/char/i8k.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)drivers/char/i8k.c +0
-0drivers/char/i8k.c static int i8k_get_temp(int sensor) · line 304
Quoted 8 lines
drivers/char/i8k.c +1
-1@@ -298,7 +298,7 @@ static int i8k_get_temp(int sensor)int temp;#ifdef I8K_TEMPERATURE_BUG -static int prev[4 ]; +static int prev[4 ] = {I8K_MAX_TEMP ,I8K_MAX_TEMP ,I8K_MAX_TEMP ,I8K_MAX_TEMP };I am not sure I understand what this change is expected to accomplish. Please explain.
drivers/char/i8k.c static int __init i8k_init_hwmon(void) · line 614
Quoted 12 lines
#endif regs.ebx = sensor & 0xff; rc = i8k_smm(®s);drivers/char/i8k.c +1
-1@@ -610,17 +610,17 @@ static int __init i8k_init_hwmon(void)/* CPU temperature attributes, if temperature reading is OK */ err =i8k_get_temp (0 ); -if (err >=0 ) +if (err >=0 && err <I8K_MAX_TEMP )
I8K_MAX_TEMPis, at least in theory, a valid temperature, so this should be "<=".It would be important to understand what the "too high" temperature is to possibly be able to distinguish it from the buggy temperature that the code is trying to fix.
Thanks,
GuenterQuoted 25 lines
drivers/char/i8k.c +2
-2i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP1 ;/* check for additional temperature sensors */ err =i8k_get_temp (1 ); -if (err >=0 ) +if (err >=0 && err <I8K_MAX_TEMP ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP2 ; err =i8k_get_temp (2 ); -if (err >=0 ) +if (err >=0 && err <I8K_MAX_TEMP )i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP3; err = i8k_get_temp(3);drivers/char/i8k.c +1
-1-if (err >=0 ) +if (err >=0 && err <I8K_MAX_TEMP ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP4 ;/* Left fan attributes, if left fan is present */
Signature · 2 lines
Pali Rohár [email protected]
Quoted 16 lines · Pali Rohár
Ok, I will describe my problem. Guenter, maybe you can find another solution/fix for it.
Calling
i8k_get_temp(3)on my laptop withoutI8K_TEMPERATURE_BUGalways returns value 193 (which is aboveI8K_MAX_TEMP).When
I8K_TEMPERATURE_BUGis enabled (by default) theni8k_get_temp(3)returns value from prev[3] and store new valueI8K_TEMPERATURE_BUGto prev[3]. Value in prev[3] is initialized to 0.What I want to achieve is: when
i8k_get_temp()for particular sensor id always returns invalid value (>I8K_MAX_TEMP) then we should totally ignore sensor with that id and do not export it via hwmon.
Quoted 9 lines
My solution is: initialize prev[id] to
I8K_MAX_TEMP, so on invalid data first call toi8k_get_temp(id)returnsI8K_MAX_TEMP. Then ini8k_init_hwmoncheck if value is <I8K_MAX_TEMPand if not ignore sensor id.Guenter, it is clear now? Are you ok that we should ignore sensor if always report value above
I8K_MAX_TEMP? If you do not like my solution/patch for it, can you specify how other can it be fixed?
I still don't see the point in initializing prev[].
Yes, I am ok with ignoring sensor values if the reported temperature is above I8K_MAX_TEMP. I am just not sure if we should check against I8K_MAX_TEMP or against, say, 192. Reason is that we do know that the sensor can erroneously return 0x99 on some systems once in a while. We would not want to ignore those sensors just because they happen to report 0x99 during initialization.
So maybe make it
if (err >= 0 && err < 192)
and add a note before the first if(), explaining that higher values suggest that there is no sensor attached.
Thanks,
Guenter
Quoted 93 lines · On Sunday 19 October 2014 17:13:29 Guenter Roeck wrote:
Quoted 91 lines · Pali Rohár
Quoted 2 lines
On some machines some temperature sensors report too high values which are
What is "too high", and what is "some machines" ? Would be great if you can be more specific.
Quoted 6 lines
invalid. When value is invalid function
i8k_get_temp()returns previous value and at next call it returnsI8K_MAX_TEMP.With this patch also firt
i8k_get_temp()call returnsI8K_MAX_TEMPandfix ? Also, I am not entirely sure I understand what exactly you are fixing here.
Quoted 14 lines
i8k_init_hwmon()will ignore all sensor ids which report incorrect values.Signed-off-by Pali Rohár <[email protected]>---
drivers/char/i8k.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)drivers/char/i8k.c +0
-0drivers/char/i8k.c static int i8k_get_temp(int sensor) · line 304
Quoted 8 lines
drivers/char/i8k.c +1
-1@@ -298,7 +298,7 @@ static int i8k_get_temp(int sensor)int temp;#ifdef I8K_TEMPERATURE_BUG -static int prev[4 ]; +static int prev[4 ] = {I8K_MAX_TEMP ,I8K_MAX_TEMP ,I8K_MAX_TEMP ,I8K_MAX_TEMP };I am not sure I understand what this change is expected to accomplish. Please explain.
drivers/char/i8k.c static int __init i8k_init_hwmon(void) · line 614
Quoted 12 lines
#endif regs.ebx = sensor & 0xff; rc = i8k_smm(®s);drivers/char/i8k.c +1
-1@@ -610,17 +610,17 @@ static int __init i8k_init_hwmon(void)/* CPU temperature attributes, if temperature reading is OK */ err =i8k_get_temp (0 ); -if (err >=0 ) +if (err >=0 && err <I8K_MAX_TEMP )
I8K_MAX_TEMPis, at least in theory, a valid temperature, so this should be "<=".It would be important to understand what the "too high" temperature is to possibly be able to distinguish it from the buggy temperature that the code is trying to fix.
Thanks,
GuenterQuoted 25 lines
drivers/char/i8k.c +2
-2i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP1 ;/* check for additional temperature sensors */ err =i8k_get_temp (1 ); -if (err >=0 ) +if (err >=0 && err <I8K_MAX_TEMP ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP2 ; err =i8k_get_temp (2 ); -if (err >=0 ) +if (err >=0 && err <I8K_MAX_TEMP )i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP3; err = i8k_get_temp(3);drivers/char/i8k.c +1
-1-if (err >=0 ) +if (err >=0 && err <I8K_MAX_TEMP ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP4 ;/* Left fan attributes, if left fan is present */
Quoted 23 lines · On Tuesday 21 October 2014 06:27:23 Guenter Roeck wrote:
Quoted 22 lines · Pali Rohár
Ok, I will describe my problem. Guenter, maybe you can find another solution/fix for it.
Calling
i8k_get_temp(3)on my laptop withoutI8K_TEMPERATURE_BUGalways returns value 193 (which is aboveI8K_MAX_TEMP).When
I8K_TEMPERATURE_BUGis enabled (by default) theni8k_get_temp(3)returns value from prev[3] and store new valueI8K_TEMPERATURE_BUGto prev[3]. Value in prev[3] is initialized to 0.What I want to achieve is: when
i8k_get_temp()for particular sensor id always returns invalid value (>I8K_MAX_TEMP) then we should totally ignore sensor with that id and do not export it via hwmon.My solution is: initialize prev[id] to
I8K_MAX_TEMP, so on invalid data first call toi8k_get_temp(id)returnsI8K_MAX_TEMP. Then ini8k_init_hwmoncheck if value is <I8K_MAX_TEMPand if not ignore sensor id.
Quoted 7 lines
Quoted 4 lines
Guenter, it is clear now? Are you ok that we should ignore sensor if always report value above
I8K_MAX_TEMP? If you do not like my solution/patch for it, can you specify how other can it be fixed?I still don't see the point in initializing prev[].
Now prev[] is initialized to 0. It means that first call i8k_get_temp() (with sensor id which return value > I8K_MAX_TEMP) returns 0. Second and other calls returns I8K_MAX_TEMP.
So point is to return same value for first and other calls.
Quoted 8 lines
Yes, I am ok with ignoring sensor values if the reported temperature is above
I8K_MAX_TEMP. I am just not sure if we should check againstI8K_MAX_TEMPor against, say, 192. Reason is that we do know that the sensor can erroneously return0x99on some systems once in a while. We would not want to ignore those sensors just because they happen to report0x99during initialization.
Quoted 8 lines
So maybe make it
if (err >= 0 && err < 192)and add a note before the first
if(), explaining that higher values suggest that there is no sensor attached.Thanks,
Guenter
Right, now we need to decide which magic constant to use...
And now I found another problem :-)
On my laptop i8k_get_temp(3) not always return value 193. It is only when AMD graphics card is turned off. When card is on i8k_get_temp(3) returns same value as temperature hwmon part from radeon DRM driver.
So it looks like that on my laptop i8k sensor with id 3 reports GPU temperature.
When card is turned off radeon driver reports -EINVAL for temperature hwmon sysnode.
So now I think i8k could not ignore sensor totally as it can be mapped to some HW which can be dynamically turned on/off (like my graphics card).
So what do you think about reporting -EINVAL instead I8K_MAX_TEMP when dell SMM returns value above I8K_MAX_TEMP?
Signature · 2 lines
Pali Rohár [email protected]
Quoted 29 lines · Pali Rohár
Quoted 28 lines · On Tuesday 21 October 2014 06:27:23 Guenter Roeck wrote:
Quoted 26 lines · Pali Rohár
Ok, I will describe my problem. Guenter, maybe you can find another solution/fix for it.
Calling
i8k_get_temp(3)on my laptop withoutI8K_TEMPERATURE_BUGalways returns value 193 (which is aboveI8K_MAX_TEMP).When
I8K_TEMPERATURE_BUGis enabled (by default) theni8k_get_temp(3)returns value from prev[3] and store new valueI8K_TEMPERATURE_BUGto prev[3]. Value in prev[3] is initialized to 0.What I want to achieve is: when
i8k_get_temp()for particular sensor id always returns invalid value (>I8K_MAX_TEMP) then we should totally ignore sensor with that id and do not export it via hwmon.My solution is: initialize prev[id] to
I8K_MAX_TEMP, so on invalid data first call toi8k_get_temp(id)returnsI8K_MAX_TEMP. Then ini8k_init_hwmoncheck if value is <I8K_MAX_TEMPand if not ignore sensor id.Guenter, it is clear now? Are you ok that we should ignore sensor if always report value above
I8K_MAX_TEMP? If you do not like my solution/patch for it, can you specify how other can it be fixed?
Quoted 9 lines
Quoted 2 lines
I still don't see the point in initializing prev[].
Now prev[] is initialized to 0. It means that first call
i8k_get_temp()(with sensor id which return value >I8K_MAX_TEMP) returns 0. Second and other calls returnsI8K_MAX_TEMP.So point is to return same value for first and other calls.
Yes, I realized that after I sent my previous mail.
Quoted 17 lines
Quoted 8 lines
Yes, I am ok with ignoring sensor values if the reported temperature is above
I8K_MAX_TEMP. I am just not sure if we should check againstI8K_MAX_TEMPor against, say, 192. Reason is that we do know that the sensor can erroneously return0x99on some systems once in a while. We would not want to ignore those sensors just because they happen to report0x99during initialization.Quoted 8 lines
So maybe make it
if (err >= 0 && err < 192)and add a note before the first
if(), explaining that higher values suggest that there is no sensor attached.Thanks,
Guenter
Quoted 9 lines
Right, now we need to decide which magic constant to use...
And now I found another problem :-)
On my laptop
i8k_get_temp(3)not always return value 193. It is only when AMD graphics card is turned off. When card is oni8k_get_temp(3)returns same value as temperature hwmon part from radeon DRM driver.
Can you turn the GPU on or off during runtime ? That would make it really tricky to handle the situation.
Quoted 6 lines
So it looks like that on my laptop i8k sensor with id 3 reports GPU temperature.
When card is turned off radeon driver reports
-EINVALfor temperature hwmon sysnode.
Quoted 7 lines
So now I think i8k could not ignore sensor totally as it can be mapped to some HW which can be dynamically turned on/off (like my graphics card).
So what do you think about reporting
-EINVALinsteadI8K_MAX_TEMPwhen dell SMM returns value aboveI8K_MAX_TEMP?
-EINVAL is supposed to mean "Invalid Argument", so it really has ia different semantics. We could use -ENXIO, "No such device or address", which seems more appropriate.
Overall, I think the entire error handling is broken and should be replaced. One option would be to explicitly check for 0x99 and, if detected, go to sleep for, say, 100ms and try again. If it still fails, and for all other bad values, return -ENXIO. Then the calling code can either return the error to user space in the show function, or not install the sensor in the probe function.
Does that make sense ?
Thanks,
Guenter
Quoted 63 lines · On Wednesday 22 October 2014 18:19:47 Guenter Roeck wrote:
Quoted 29 lines · Pali Rohár
Quoted 28 lines · On Tuesday 21 October 2014 06:27:23 Guenter Roeck wrote:
Quoted 26 lines · Pali Rohár
Ok, I will describe my problem. Guenter, maybe you can find another solution/fix for it.
Calling
i8k_get_temp(3)on my laptop withoutI8K_TEMPERATURE_BUGalways returns value 193 (which is aboveI8K_MAX_TEMP).When
I8K_TEMPERATURE_BUGis enabled (by default) theni8k_get_temp(3)returns value from prev[3] and store new valueI8K_TEMPERATURE_BUGto prev[3]. Value in prev[3] is initialized to 0.What I want to achieve is: when
i8k_get_temp()for particular sensor id always returns invalid value (>I8K_MAX_TEMP) then we should totally ignore sensor with that id and do not export it via hwmon.My solution is: initialize prev[id] to
I8K_MAX_TEMP, so on invalid data first call toi8k_get_temp(id)returnsI8K_MAX_TEMP. Then ini8k_init_hwmoncheck if value is <I8K_MAX_TEMPand if not ignore sensor id.Guenter, it is clear now? Are you ok that we should ignore sensor if always report value above
I8K_MAX_TEMP? If you do not like my solution/patch for it, can you specify how other can it be fixed?Quoted 8 lines
Quoted 1 line
I still don't see the point in initializing prev[].
Now prev[] is initialized to 0. It means that first call
i8k_get_temp()(with sensor id which return value >I8K_MAX_TEMP) returns 0. Second and other calls returnsI8K_MAX_TEMP.So point is to return same value for first and other calls.
Yes, I realized that after I sent my previous mail.
Quoted 22 lines
Quoted 10 lines
Yes, I am ok with ignoring sensor values if the reported temperature is above
I8K_MAX_TEMP. I am just not sure if we should check againstI8K_MAX_TEMPor against, say,
192. Reason is that we do know that the sensor can erroneously return0x99on some systems once in a while. We would not want to ignore those sensors just because they happen to report0x99during initialization.So maybe make it
Quoted 7 lines
if (err >= 0 && err < 192)and add a note before the first
if(), explaining that higher values suggest that there is no sensor attached.Thanks,
GuenterRight, now we need to decide which magic constant to use...
And now I found another problem :-)
Quoted 8 lines
Quoted 4 lines
On my laptop
i8k_get_temp(3)not always return value 193. It is only when AMD graphics card is turned off. When card is oni8k_get_temp(3)returns same value as temperature hwmon part from radeon DRM driver.Can you turn the GPU on or off during runtime ? That would make it really tricky to handle the situation.
Yes. New laptops with Nvidia Optimus or AMD PowerXpress or Enduro technology are designed to automatically turn off secondary GPU when is not in use. And nouveau/radeon drivers together with vga_switcheroo implements this dynamic power on/off.
Quoted 10 lines
Quoted 10 lines
So it looks like that on my laptop i8k sensor with id 3 reports GPU temperature.
When card is turned off radeon driver reports
-EINVALfor temperature hwmon sysnode.So now I think i8k could not ignore sensor totally as it can be mapped to some HW which can be dynamically turned on/off (like my graphics card).
Quoted 8 lines
Quoted 3 lines
So what do you think about reporting
-EINVALinsteadI8K_MAX_TEMPwhen dell SMM returns value aboveI8K_MAX_TEMP?
-EINVALis supposed to mean "Invalid Argument", so it really has ia different semantics. We could use-ENXIO, "No such device or address", which seems more appropriate.
I prefer to use -EINVAL because other driver (radeon) is using it and userspace "sensors" programs handle EINVAL and show "N/A" in output instead reporting some error about reading value. If nothing else consistency (with other drivers) is my argument.
Quoted 10 lines
Overall, I think the entire error handling is broken and should be replaced. One option would be to explicitly check for
0x99and, if detected, go to sleep for, say, 100ms and try again. If it still fails, and for all other bad values, return-ENXIO. Then the calling code can either return the error to user space in the show function, or not install the sensor in the probe function.Does that make sense ?
Yes, replacing error handling with retry call (after some sleep) is better then current code (which returns previous value or returns I8K_MAX_TEMP).
But your solution not install the sensor if probe fails on bad value does not solve problem that i8k.ko is loading at time when GPU card is turned off.
I think current check for installing sensor (err < 0) is enough and when invalid value (> I8K_MAX_TEMP) is returned just do not show this value for userspace in hwmon sysnode.
Quoted 2 lines
Thanks,
Guenter
Signature · 2 lines
Pali Rohár [email protected]
Quoted 97 lines · Pali Rohár
Quoted 63 lines · On Wednesday 22 October 2014 18:19:47 Guenter Roeck wrote:
Quoted 29 lines · Pali Rohár
Quoted 28 lines · On Tuesday 21 October 2014 06:27:23 Guenter Roeck wrote:
Quoted 26 lines · Pali Rohár
Ok, I will describe my problem. Guenter, maybe you can find another solution/fix for it.
Calling
i8k_get_temp(3)on my laptop withoutI8K_TEMPERATURE_BUGalways returns value 193 (which is aboveI8K_MAX_TEMP).When
I8K_TEMPERATURE_BUGis enabled (by default) theni8k_get_temp(3)returns value from prev[3] and store new valueI8K_TEMPERATURE_BUGto prev[3]. Value in prev[3] is initialized to 0.What I want to achieve is: when
i8k_get_temp()for particular sensor id always returns invalid value (>I8K_MAX_TEMP) then we should totally ignore sensor with that id and do not export it via hwmon.My solution is: initialize prev[id] to
I8K_MAX_TEMP, so on invalid data first call toi8k_get_temp(id)returnsI8K_MAX_TEMP. Then ini8k_init_hwmoncheck if value is <I8K_MAX_TEMPand if not ignore sensor id.Guenter, it is clear now? Are you ok that we should ignore sensor if always report value above
I8K_MAX_TEMP? If you do not like my solution/patch for it, can you specify how other can it be fixed?Quoted 8 lines
Quoted 1 line
I still don't see the point in initializing prev[].
Now prev[] is initialized to 0. It means that first call
i8k_get_temp()(with sensor id which return value >I8K_MAX_TEMP) returns 0. Second and other calls returnsI8K_MAX_TEMP.So point is to return same value for first and other calls.
Yes, I realized that after I sent my previous mail.
Quoted 22 lines
Quoted 10 lines
Yes, I am ok with ignoring sensor values if the reported temperature is above
I8K_MAX_TEMP. I am just not sure if we should check againstI8K_MAX_TEMPor against, say,
192. Reason is that we do know that the sensor can erroneously return0x99on some systems once in a while. We would not want to ignore those sensors just because they happen to report0x99during initialization.So maybe make it
Quoted 7 lines
if (err >= 0 && err < 192)and add a note before the first
if(), explaining that higher values suggest that there is no sensor attached.Thanks,
GuenterRight, now we need to decide which magic constant to use...
And now I found another problem :-)
Quoted 8 lines
Quoted 4 lines
On my laptop
i8k_get_temp(3)not always return value 193. It is only when AMD graphics card is turned off. When card is oni8k_get_temp(3)returns same value as temperature hwmon part from radeon DRM driver.Can you turn the GPU on or off during runtime ? That would make it really tricky to handle the situation.
Yes. New laptops with Nvidia Optimus or AMD PowerXpress or Enduro technology are designed to automatically turn off secondary GPU when is not in use. And nouveau/radeon drivers together with
vga_switcherooimplements this dynamic power on/off.Quoted 10 lines
Quoted 10 lines
So it looks like that on my laptop i8k sensor with id 3 reports GPU temperature.
When card is turned off radeon driver reports
-EINVALfor temperature hwmon sysnode.So now I think i8k could not ignore sensor totally as it can be mapped to some HW which can be dynamically turned on/off (like my graphics card).
Quoted 8 lines
Quoted 3 lines
So what do you think about reporting
-EINVALinsteadI8K_MAX_TEMPwhen dell SMM returns value aboveI8K_MAX_TEMP?
-EINVALis supposed to mean "Invalid Argument", so it really has ia different semantics. We could use-ENXIO, "No such device or address", which seems more appropriate.
Quoted 5 lines
I prefer to use
-EINVALbecause other driver (radeon) is using it and userspace "sensors" programs handle EINVAL and show "N/A" in output instead reporting some error about reading value. If nothing else consistency (with other drivers) is my argument.
Ok, if sensors implements it that way then let's do it.
Quoted 11 lines
Quoted 10 lines
Overall, I think the entire error handling is broken and should be replaced. One option would be to explicitly check for
0x99and, if detected, go to sleep for, say, 100ms and try again. If it still fails, and for all other bad values, return-ENXIO. Then the calling code can either return the error to user space in the show function, or not install the sensor in the probe function.Does that make sense ?
Quoted 8 lines
Yes, replacing error handling with retry call (after some sleep) is better then current code (which returns previous value or returns
I8K_MAX_TEMP).But your solution not install the sensor if probe fails on bad value does not solve problem that i8k.ko is loading at time when GPU card is turned off.
Yes, the dynamics in that situation makes it a bit difficult to handle the situation.
Quoted 4 lines
I think current check for installing sensor (err < 0) is enough and when invalid value (>
I8K_MAX_TEMP) is returned just do not show this value for userspace in hwmon sysnode.
Ok with me, and agreed.
Thanks,
Guenter
Quoted 133 lines · On Wednesday 22 October 2014 19:10:05 Guenter Roeck wrote:
Quoted 102 lines · Pali Rohár
Quoted 68 lines · On Wednesday 22 October 2014 18:19:47 Guenter Roeck wrote:
Quoted 32 lines · Pali Rohár
Quoted 24 lines · On Tuesday 21 October 2014 06:27:23 Guenter Roeck wrote:
Quoted 23 lines · Pali Rohár
Ok, I will describe my problem. Guenter, maybe you can find another solution/fix for it.
Calling
i8k_get_temp(3)on my laptop withoutI8K_TEMPERATURE_BUGalways returns value 193 (which is aboveI8K_MAX_TEMP).When
I8K_TEMPERATURE_BUGis enabled (by default) theni8k_get_temp(3)returns value from prev[3] and store new valueI8K_TEMPERATURE_BUGto prev[3]. Value in prev[3] is initialized to 0.What I want to achieve is: when
i8k_get_temp()for particular sensor id always returns invalid value (>I8K_MAX_TEMP) then we should totally ignore sensor with that id and do not export it via hwmon.My solution is: initialize prev[id] to
I8K_MAX_TEMP, so on invalid data first call toi8k_get_temp(id)returnsI8K_MAX_TEMP. Then ini8k_init_hwmoncheck if value is <I8K_MAX_TEMPand if not ignore sensor id.Quoted 6 lines
Quoted 4 lines
Guenter, it is clear now? Are you ok that we should ignore sensor if always report value above
I8K_MAX_TEMP? If you do not like my solution/patch for it, can you specify how other can it be fixed?I still don't see the point in initializing prev[].
Quoted 7 lines
Now prev[] is initialized to 0. It means that first call
i8k_get_temp()(with sensor id which return value >I8K_MAX_TEMP) returns 0. Second and other calls returnsI8K_MAX_TEMP.So point is to return same value for first and other calls.
Yes, I realized that after I sent my previous mail.
Quoted 25 lines
Quoted 11 lines
Yes, I am ok with ignoring sensor values if the reported temperature is above
I8K_MAX_TEMP. I am just not sure if we should check againstI8K_MAX_TEMPor against, say, 192. Reason is that we do know that the sensor can erroneously return0x99on some systems once in a while. We would not want to ignore those sensors just because they happen to report0x99during initialization.So maybe make it
Quoted 8 lines
if (err >= 0 && err < 192)and add a note before the first
if(), explaining that higher values suggest that there is no sensor attached.Thanks,
GuenterRight, now we need to decide which magic constant to use...
And now I found another problem :-)
Quoted 7 lines
Quoted 4 lines
On my laptop
i8k_get_temp(3)not always return value
193. It is only when AMD graphics card is turned off. When card is oni8k_get_temp(3)returns same value as temperature hwmon part from radeon DRM driver.Can you turn the GPU on or off during runtime ? That would make it really tricky to handle the situation.
Yes. New laptops with Nvidia Optimus or AMD PowerXpress or Enduro technology are designed to automatically turn off secondary GPU when is not in use. And nouveau/radeon drivers together with
vga_switcherooimplements this dynamic power on/off.Quoted 10 lines
Quoted 10 lines
So it looks like that on my laptop i8k sensor with id 3 reports GPU temperature.
When card is turned off radeon driver reports
-EINVALfor temperature hwmon sysnode.So now I think i8k could not ignore sensor totally as it can be mapped to some HW which can be dynamically turned on/off (like my graphics card).
Quoted 8 lines
Quoted 3 lines
So what do you think about reporting
-EINVALinsteadI8K_MAX_TEMPwhen dell SMM returns value aboveI8K_MAX_TEMP?
-EINVALis supposed to mean "Invalid Argument", so it really has ia different semantics. We could use-ENXIO, "No such device or address", which seems more appropriate.Quoted 5 lines
I prefer to use
-EINVALbecause other driver (radeon) is using it and userspace "sensors" programs handle EINVAL and show "N/A" in output instead reporting some error about reading value. If nothing else consistency (with other drivers) is my argument.Ok, if sensors implements it that way then let's do it.
Quoted 11 lines
Quoted 10 lines
Overall, I think the entire error handling is broken and should be replaced. One option would be to explicitly check for
0x99and, if detected, go to sleep for, say, 100ms and try again. If it still fails, and for all other bad values, return-ENXIO. Then the calling code can either return the error to user space in the show function, or not install the sensor in the probe function.Does that make sense ?
Quoted 7 lines
Yes, replacing error handling with retry call (after some sleep) is better then current code (which returns previous value or returns
I8K_MAX_TEMP).But your solution not install the sensor if probe fails on bad value does not solve problem that i8k.ko is loading at time when GPU card is turned off.
Yes, the dynamics in that situation makes it a bit difficult to handle the situation.
Quoted 8 lines
Quoted 3 lines
I think current check for installing sensor (err < 0) is enough and when invalid value (>
I8K_MAX_TEMP) is returned just do not show this value for userspace in hwmon sysnode.Ok with me, and agreed.
Thanks,
Guenter
Ok, are you going to fix i8k_get_temp() function (with sleeping)?
Signature · 2 lines
Pali Rohár [email protected]
Quoted 138 lines · Pali Rohár
Quoted 137 lines · On Wednesday 22 October 2014 19:10:05 Guenter Roeck wrote:
Quoted 102 lines · Pali Rohár
Quoted 68 lines · On Wednesday 22 October 2014 18:19:47 Guenter Roeck wrote:
Quoted 32 lines · Pali Rohár
Quoted 24 lines · On Tuesday 21 October 2014 06:27:23 Guenter Roeck wrote:
Quoted 23 lines · Pali Rohár
Ok, I will describe my problem. Guenter, maybe you can find another solution/fix for it.
Calling
i8k_get_temp(3)on my laptop withoutI8K_TEMPERATURE_BUGalways returns value 193 (which is aboveI8K_MAX_TEMP).When
I8K_TEMPERATURE_BUGis enabled (by default) theni8k_get_temp(3)returns value from prev[3] and store new valueI8K_TEMPERATURE_BUGto prev[3]. Value in prev[3] is initialized to 0.What I want to achieve is: when
i8k_get_temp()for particular sensor id always returns invalid value (>I8K_MAX_TEMP) then we should totally ignore sensor with that id and do not export it via hwmon.My solution is: initialize prev[id] to
I8K_MAX_TEMP, so on invalid data first call toi8k_get_temp(id)returnsI8K_MAX_TEMP. Then ini8k_init_hwmoncheck if value is <I8K_MAX_TEMPand if not ignore sensor id.Quoted 6 lines
Quoted 4 lines
Guenter, it is clear now? Are you ok that we should ignore sensor if always report value above
I8K_MAX_TEMP? If you do not like my solution/patch for it, can you specify how other can it be fixed?I still don't see the point in initializing prev[].
Quoted 7 lines
Now prev[] is initialized to 0. It means that first call
i8k_get_temp()(with sensor id which return value >I8K_MAX_TEMP) returns 0. Second and other calls returnsI8K_MAX_TEMP.So point is to return same value for first and other calls.
Yes, I realized that after I sent my previous mail.
Quoted 25 lines
Quoted 11 lines
Yes, I am ok with ignoring sensor values if the reported temperature is above
I8K_MAX_TEMP. I am just not sure if we should check againstI8K_MAX_TEMPor against, say, 192. Reason is that we do know that the sensor can erroneously return0x99on some systems once in a while. We would not want to ignore those sensors just because they happen to report0x99during initialization.So maybe make it
Quoted 8 lines
if (err >= 0 && err < 192)and add a note before the first
if(), explaining that higher values suggest that there is no sensor attached.Thanks,
GuenterRight, now we need to decide which magic constant to use...
And now I found another problem :-)
Quoted 7 lines
Quoted 4 lines
On my laptop
i8k_get_temp(3)not always return value
193. It is only when AMD graphics card is turned off. When card is oni8k_get_temp(3)returns same value as temperature hwmon part from radeon DRM driver.Can you turn the GPU on or off during runtime ? That would make it really tricky to handle the situation.
Yes. New laptops with Nvidia Optimus or AMD PowerXpress or Enduro technology are designed to automatically turn off secondary GPU when is not in use. And nouveau/radeon drivers together with
vga_switcherooimplements this dynamic power on/off.Quoted 10 lines
Quoted 10 lines
So it looks like that on my laptop i8k sensor with id 3 reports GPU temperature.
When card is turned off radeon driver reports
-EINVALfor temperature hwmon sysnode.So now I think i8k could not ignore sensor totally as it can be mapped to some HW which can be dynamically turned on/off (like my graphics card).
Quoted 8 lines
Quoted 3 lines
So what do you think about reporting
-EINVALinsteadI8K_MAX_TEMPwhen dell SMM returns value aboveI8K_MAX_TEMP?
-EINVALis supposed to mean "Invalid Argument", so it really has ia different semantics. We could use-ENXIO, "No such device or address", which seems more appropriate.Quoted 5 lines
I prefer to use
-EINVALbecause other driver (radeon) is using it and userspace "sensors" programs handle EINVAL and show "N/A" in output instead reporting some error about reading value. If nothing else consistency (with other drivers) is my argument.Ok, if sensors implements it that way then let's do it.
Quoted 11 lines
Quoted 10 lines
Overall, I think the entire error handling is broken and should be replaced. One option would be to explicitly check for
0x99and, if detected, go to sleep for, say, 100ms and try again. If it still fails, and for all other bad values, return-ENXIO. Then the calling code can either return the error to user space in the show function, or not install the sensor in the probe function.Does that make sense ?
Quoted 7 lines
Yes, replacing error handling with retry call (after some sleep) is better then current code (which returns previous value or returns
I8K_MAX_TEMP).But your solution not install the sensor if probe fails on bad value does not solve problem that i8k.ko is loading at time when GPU card is turned off.
Yes, the dynamics in that situation makes it a bit difficult to handle the situation.
Quoted 3 lines
I think current check for installing sensor (err < 0) is enough and when invalid value (>
I8K_MAX_TEMP) is returned just do not show this value for userspace in hwmon sysnode.
Quoted 7 lines
Quoted 4 lines
Ok with me, and agreed.
Thanks,
GuenterOk, are you going to fix
i8k_get_temp()function (with sleeping)?
I had hoped you would find the time to do it ;-).
Sure, I can do it, but I am kind of busy right now, so it will take a while.
Thanks,
Guenter
Quoted 4 lines · On Thursday 23 October 2014 18:45:07 Guenter Roeck wrote:
Quoted 3 lines · Pali Rohár
Quoted 2 lines · On Wednesday 22 October 2014 19:10:05 Guenter Roeck wrote:
Quoted 1 line · Pali Rohár
On Wednesday 22 October 2014 18:19:47 Guenter Roeck
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
On Wed, Oct 22, 2014 at 02:29:06PM +0200, Pali Rohár
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
On Tuesday 21 October 2014 06:27:23 Guenter Roeck
Quoted 147 lines · wrote:
Quoted 139 lines
Quoted 139 lines
Quoted 99 lines
Quoted 75 lines
Quoted 34 lines
Quoted 25 lines · Pali Rohár
Quoted 24 lines
Ok, I will describe my problem. Guenter, maybe you can find another solution/fix for it.
Calling
i8k_get_temp(3)on my laptop withoutI8K_TEMPERATURE_BUGalways returns value 193 (which is aboveI8K_MAX_TEMP).When
I8K_TEMPERATURE_BUGis enabled (by default) theni8k_get_temp(3)returns value from prev[3] and store new valueI8K_TEMPERATURE_BUGto prev[3]. Value in prev[3] is initialized to 0.What I want to achieve is: when
i8k_get_temp()for particular sensor id always returns invalid value (>I8K_MAX_TEMP) then we should totally ignore sensor with that id and do not export it via hwmon.My solution is: initialize prev[id] to
I8K_MAX_TEMP, so on invalid data first call toi8k_get_temp(id)returnsI8K_MAX_TEMP. Then ini8k_init_hwmoncheck if value is <I8K_MAX_TEMPand if not ignore sensor id.Quoted 8 lines
Quoted 5 lines
Guenter, it is clear now? Are you ok that we should ignore sensor if always report value above
I8K_MAX_TEMP? If you do not like my solution/patch for it, can you specify how other can it be fixed?I still don't see the point in initializing prev[].
Quoted 7 lines
Now prev[] is initialized to 0. It means that first call
i8k_get_temp()(with sensor id which return value >I8K_MAX_TEMP) returns 0. Second and other calls returnsI8K_MAX_TEMP.So point is to return same value for first and other calls.
Yes, I realized that after I sent my previous mail.
Quoted 23 lines
Quoted 11 lines
Yes, I am ok with ignoring sensor values if the reported temperature is above
I8K_MAX_TEMP. I am just not sure if we should check againstI8K_MAX_TEMPor against, say, 192. Reason is that we do know that the sensor can erroneously return0x99on some systems once in a while. We would not want to ignore those sensors just because they happen to report0x99during initialization.So maybe make it
Quoted 8 lines
if (err >= 0 && err < 192)and add a note before the first
if(), explaining that higher values suggest that there is no sensor attached.Thanks,
GuenterRight, now we need to decide which magic constant to use...
Quoted 7 lines
And now I found another problem :-)
On my laptop
i8k_get_temp(3)not always return value
193. It is only when AMD graphics card is turned off. When card is oni8k_get_temp(3)returns same value as temperature hwmon part from radeon DRM driver.Quoted 3 lines
Can you turn the GPU on or off during runtime ? That would make it really tricky to handle the situation.
Yes. New laptops with Nvidia Optimus or AMD PowerXpress or Enduro technology are designed to automatically turn off secondary GPU when is not in use. And nouveau/radeon drivers together with
vga_switcherooimplements this dynamic power on/off.Quoted 14 lines
Quoted 13 lines
So it looks like that on my laptop i8k sensor with id 3 reports GPU temperature.
When card is turned off radeon driver reports
-EINVALfor temperature hwmon sysnode.So now I think i8k could not ignore sensor totally as it can be mapped to some HW which can be dynamically turned on/off (like my graphics card).
So what do you think about reporting
-EINVALinsteadI8K_MAX_TEMPwhen dell SMM returns value aboveI8K_MAX_TEMP?Quoted 10 lines
Quoted 4 lines
-EINVALis supposed to mean "Invalid Argument", so it really has ia different semantics. We could use-ENXIO, "No such device or address", which seems more appropriate.I prefer to use
-EINVALbecause other driver (radeon) is using it and userspace "sensors" programs handle EINVAL and show "N/A" in output instead reporting some error about reading value. If nothing else consistency (with other drivers) is my argument.Ok, if sensors implements it that way then let's do it.
Quoted 11 lines
Quoted 10 lines
Overall, I think the entire error handling is broken and should be replaced. One option would be to explicitly check for
0x99and, if detected, go to sleep for, say, 100ms and try again. If it still fails, and for all other bad values, return-ENXIO. Then the calling code can either return the error to user space in the show function, or not install the sensor in the probe function.Does that make sense ?
Quoted 7 lines
Yes, replacing error handling with retry call (after some sleep) is better then current code (which returns previous value or returns
I8K_MAX_TEMP).But your solution not install the sensor if probe fails on bad value does not solve problem that i8k.ko is loading at time when GPU card is turned off.
Yes, the dynamics in that situation makes it a bit difficult to handle the situation.
Quoted 4 lines
I think current check for installing sensor (err < 0) is enough and when invalid value (>
I8K_MAX_TEMP) is returned just do not show this value for userspace in hwmon sysnode.Quoted 7 lines
Quoted 4 lines
Ok with me, and agreed.
Thanks,
GuenterOk, are you going to fix
i8k_get_temp()function (with sleeping)?
Quoted 7 lines
I had hoped you would find the time to do it ;-).
Sure, I can do it, but I am kind of busy right now, so it will take a while.
Thanks,
Guenter
Ok. Will you do that for 3.19 kernel? Meanwhile I can prepare patch for temperature labels. I looked into NBSVC.MDM and there is something related for type of temperature sensors...
Signature · 2 lines
Pali Rohár [email protected]
Quoted 162 lines · Pali Rohár
Quoted 4 lines · On Thursday 23 October 2014 18:45:07 Guenter Roeck wrote:
Quoted 3 lines · Pali Rohár
Quoted 2 lines · On Wednesday 22 October 2014 19:10:05 Guenter Roeck wrote:
Quoted 1 line · Pali Rohár
On Wednesday 22 October 2014 18:19:47 Guenter Roeck
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
On Wed, Oct 22, 2014 at 02:29:06PM +0200, Pali Rohár
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
On Tuesday 21 October 2014 06:27:23 Guenter Roeck
Quoted 152 lines · wrote:
Quoted 139 lines
Quoted 139 lines
Quoted 99 lines
Quoted 75 lines
Quoted 34 lines
Quoted 25 lines · Pali Rohár
Quoted 24 lines
Ok, I will describe my problem. Guenter, maybe you can find another solution/fix for it.
Calling
i8k_get_temp(3)on my laptop withoutI8K_TEMPERATURE_BUGalways returns value 193 (which is aboveI8K_MAX_TEMP).When
I8K_TEMPERATURE_BUGis enabled (by default) theni8k_get_temp(3)returns value from prev[3] and store new valueI8K_TEMPERATURE_BUGto prev[3]. Value in prev[3] is initialized to 0.What I want to achieve is: when
i8k_get_temp()for particular sensor id always returns invalid value (>I8K_MAX_TEMP) then we should totally ignore sensor with that id and do not export it via hwmon.My solution is: initialize prev[id] to
I8K_MAX_TEMP, so on invalid data first call toi8k_get_temp(id)returnsI8K_MAX_TEMP. Then ini8k_init_hwmoncheck if value is <I8K_MAX_TEMPand if not ignore sensor id.Quoted 8 lines
Quoted 5 lines
Guenter, it is clear now? Are you ok that we should ignore sensor if always report value above
I8K_MAX_TEMP? If you do not like my solution/patch for it, can you specify how other can it be fixed?I still don't see the point in initializing prev[].
Quoted 7 lines
Now prev[] is initialized to 0. It means that first call
i8k_get_temp()(with sensor id which return value >I8K_MAX_TEMP) returns 0. Second and other calls returnsI8K_MAX_TEMP.So point is to return same value for first and other calls.
Yes, I realized that after I sent my previous mail.
Quoted 23 lines
Quoted 11 lines
Yes, I am ok with ignoring sensor values if the reported temperature is above
I8K_MAX_TEMP. I am just not sure if we should check againstI8K_MAX_TEMPor against, say, 192. Reason is that we do know that the sensor can erroneously return0x99on some systems once in a while. We would not want to ignore those sensors just because they happen to report0x99during initialization.So maybe make it
Quoted 8 lines
if (err >= 0 && err < 192)and add a note before the first
if(), explaining that higher values suggest that there is no sensor attached.Thanks,
GuenterRight, now we need to decide which magic constant to use...
Quoted 7 lines
And now I found another problem :-)
On my laptop
i8k_get_temp(3)not always return value
193. It is only when AMD graphics card is turned off. When card is oni8k_get_temp(3)returns same value as temperature hwmon part from radeon DRM driver.Quoted 3 lines
Can you turn the GPU on or off during runtime ? That would make it really tricky to handle the situation.
Yes. New laptops with Nvidia Optimus or AMD PowerXpress or Enduro technology are designed to automatically turn off secondary GPU when is not in use. And nouveau/radeon drivers together with
vga_switcherooimplements this dynamic power on/off.Quoted 14 lines
Quoted 13 lines
So it looks like that on my laptop i8k sensor with id 3 reports GPU temperature.
When card is turned off radeon driver reports
-EINVALfor temperature hwmon sysnode.So now I think i8k could not ignore sensor totally as it can be mapped to some HW which can be dynamically turned on/off (like my graphics card).
So what do you think about reporting
-EINVALinsteadI8K_MAX_TEMPwhen dell SMM returns value aboveI8K_MAX_TEMP?Quoted 10 lines
Quoted 4 lines
-EINVALis supposed to mean "Invalid Argument", so it really has ia different semantics. We could use-ENXIO, "No such device or address", which seems more appropriate.I prefer to use
-EINVALbecause other driver (radeon) is using it and userspace "sensors" programs handle EINVAL and show "N/A" in output instead reporting some error about reading value. If nothing else consistency (with other drivers) is my argument.Ok, if sensors implements it that way then let's do it.
Quoted 11 lines
Quoted 10 lines
Overall, I think the entire error handling is broken and should be replaced. One option would be to explicitly check for
0x99and, if detected, go to sleep for, say, 100ms and try again. If it still fails, and for all other bad values, return-ENXIO. Then the calling code can either return the error to user space in the show function, or not install the sensor in the probe function.Does that make sense ?
Quoted 7 lines
Yes, replacing error handling with retry call (after some sleep) is better then current code (which returns previous value or returns
I8K_MAX_TEMP).But your solution not install the sensor if probe fails on bad value does not solve problem that i8k.ko is loading at time when GPU card is turned off.
Yes, the dynamics in that situation makes it a bit difficult to handle the situation.
Quoted 4 lines
I think current check for installing sensor (err < 0) is enough and when invalid value (>
I8K_MAX_TEMP) is returned just do not show this value for userspace in hwmon sysnode.Quoted 7 lines
Quoted 4 lines
Ok with me, and agreed.
Thanks,
GuenterOk, are you going to fix
i8k_get_temp()function (with sleeping)?I had hoped you would find the time to do it ;-).
Sure, I can do it, but I am kind of busy right now, so it will take a while.
Quoted 7 lines
Quoted 2 lines
Thanks,
GuenterOk. Will you do that for 3.19 kernel? Meanwhile I can prepare patch for temperature labels. I looked into NBSVC.MDM and there is something related for type of temperature sensors...
Highly unlikely. I don't have the time right now.
Guenter
Quoted 5 lines · On Tuesday 18 November 2014 06:56:11 Guenter Roeck wrote:
Quoted 4 lines · Pali Rohár
Quoted 3 lines · On Thursday 23 October 2014 18:45:07 Guenter Roeck wrote:
Quoted 2 lines · Pali Rohár
Quoted 1 line · On Wednesday 22 October 2014 19:10:05 Guenter Roeck wrote:
On Wed, Oct 22, 2014 at 06:35:53PM +0200, Pali Rohár
Quoted 164 lines · wrote:
Quoted 164 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
On Wednesday 22 October 2014 18:19:47 Guenter Roeck
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
On Wed, Oct 22, 2014 at 02:29:06PM +0200, Pali Rohár
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
On Tuesday 21 October 2014 06:27:23 Guenter Roeck
Quoted 154 lines · wrote:
Quoted 139 lines
Quoted 139 lines
Quoted 99 lines
Quoted 75 lines
Quoted 34 lines
Quoted 25 lines · Pali Rohár
Quoted 24 lines
Ok, I will describe my problem. Guenter, maybe you can find another solution/fix for it.
Calling
i8k_get_temp(3)on my laptop withoutI8K_TEMPERATURE_BUGalways returns value 193 (which is aboveI8K_MAX_TEMP).When
I8K_TEMPERATURE_BUGis enabled (by default) theni8k_get_temp(3)returns value from prev[3] and store new valueI8K_TEMPERATURE_BUGto prev[3]. Value in prev[3] is initialized to 0.What I want to achieve is: when
i8k_get_temp()for particular sensor id always returns invalid value (>I8K_MAX_TEMP) then we should totally ignore sensor with that id and do not export it via hwmon.My solution is: initialize prev[id] to
I8K_MAX_TEMP, so on invalid data first call toi8k_get_temp(id)returnsI8K_MAX_TEMP. Then ini8k_init_hwmoncheck if value is <I8K_MAX_TEMPand if not ignore sensor id.Quoted 8 lines
Quoted 5 lines
Guenter, it is clear now? Are you ok that we should ignore sensor if always report value above
I8K_MAX_TEMP? If you do not like my solution/patch for it, can you specify how other can it be fixed?I still don't see the point in initializing prev[].
Quoted 7 lines
Now prev[] is initialized to 0. It means that first call
i8k_get_temp()(with sensor id which return value >I8K_MAX_TEMP) returns 0. Second and other calls returnsI8K_MAX_TEMP.So point is to return same value for first and other calls.
Yes, I realized that after I sent my previous mail.
Quoted 23 lines
Quoted 11 lines
Yes, I am ok with ignoring sensor values if the reported temperature is above
I8K_MAX_TEMP. I am just not sure if we should check againstI8K_MAX_TEMPor against, say, 192. Reason is that we do know that the sensor can erroneously return0x99on some systems once in a while. We would not want to ignore those sensors just because they happen to report0x99during initialization.So maybe make it
Quoted 8 lines
if (err >= 0 && err < 192)and add a note before the first
if(), explaining that higher values suggest that there is no sensor attached.Thanks,
GuenterRight, now we need to decide which magic constant to use...
Quoted 7 lines
And now I found another problem :-)
On my laptop
i8k_get_temp(3)not always return value
193. It is only when AMD graphics card is turned off. When card is oni8k_get_temp(3)returns same value as temperature hwmon part from radeon DRM driver.Quoted 3 lines
Can you turn the GPU on or off during runtime ? That would make it really tricky to handle the situation.
Yes. New laptops with Nvidia Optimus or AMD PowerXpress or Enduro technology are designed to automatically turn off secondary GPU when is not in use. And nouveau/radeon drivers together with
vga_switcherooimplements this dynamic power on/off.Quoted 14 lines
Quoted 13 lines
So it looks like that on my laptop i8k sensor with id 3 reports GPU temperature.
When card is turned off radeon driver reports
-EINVALfor temperature hwmon sysnode.So now I think i8k could not ignore sensor totally as it can be mapped to some HW which can be dynamically turned on/off (like my graphics card).
So what do you think about reporting
-EINVALinsteadI8K_MAX_TEMPwhen dell SMM returns value aboveI8K_MAX_TEMP?Quoted 10 lines
Quoted 4 lines
-EINVALis supposed to mean "Invalid Argument", so it really has ia different semantics. We could use-ENXIO, "No such device or address", which seems more appropriate.I prefer to use
-EINVALbecause other driver (radeon) is using it and userspace "sensors" programs handle EINVAL and show "N/A" in output instead reporting some error about reading value. If nothing else consistency (with other drivers) is my argument.Ok, if sensors implements it that way then let's do it.
Quoted 11 lines
Quoted 10 lines
Overall, I think the entire error handling is broken and should be replaced. One option would be to explicitly check for
0x99and, if detected, go to sleep for, say, 100ms and try again. If it still fails, and for all other bad values, return-ENXIO. Then the calling code can either return the error to user space in the show function, or not install the sensor in the probe function.Does that make sense ?
Quoted 7 lines
Yes, replacing error handling with retry call (after some sleep) is better then current code (which returns previous value or returns
I8K_MAX_TEMP).But your solution not install the sensor if probe fails on bad value does not solve problem that i8k.ko is loading at time when GPU card is turned off.
Yes, the dynamics in that situation makes it a bit difficult to handle the situation.
Quoted 4 lines
I think current check for installing sensor (err < 0) is enough and when invalid value (>
I8K_MAX_TEMP) is returned just do not show this value for userspace in hwmon sysnode.Quoted 7 lines
Quoted 4 lines
Ok with me, and agreed.
Thanks,
GuenterOk, are you going to fix
i8k_get_temp()function (with sleeping)?I had hoped you would find the time to do it ;-).
Sure, I can do it, but I am kind of busy right now, so it will take a while.
Thanks,
Guenter
Quoted 8 lines
Quoted 4 lines
Ok. Will you do that for 3.19 kernel? Meanwhile I can prepare patch for temperature labels. I looked into NBSVC.MDM and there is something related for type of temperature sensors...
Highly unlikely. I don't have the time right now.
Guenter
Ok. I will try to at least fix patch from first post in this thread, so i8k_get_temp() does not return totally invalid value to userspace (or at first call).
Signature · 2 lines
Pali Rohár [email protected]
PATCH 1/1 i8k: Fix temperature bug handling in i8k_get_temp()
Static array prev[] was incorrectly initialized. It should be initialized to some "invalid" temperature value (above I8K_MAX_TEMP).
Next, function should store "invalid" value to prev[] (above I8K_MAX_TEMP), not valid (= I8K_MAX_TEMP) because whole temperature bug handling will not work.
And last part, to not break existing detection of temperature sensors, register them also if i8k report too high temperature (above I8K_MAX_TEMP). This is needed because some sensors are sometimes turned off (e.g sensor on GPU which can be turned off/on) and in this case SMM report too high value.
To prevent reporting "invalid" values to userspace, return -EINVAL. In this case sensors which are currently turned off (e.g optimus/powerexpress/enduro gpu) are reported as "N/A" by lm-sensors package.
--- drivers/char/i8k.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)
drivers/char/i8k.c +10 -6
@@ -298,7 +298,7 @@ static int i8k_get_temp(int sensor)int temp;#ifdef I8K_TEMPERATURE_BUG -static int prev[4 ]; +static int prev[4 ] = {I8K_MAX_TEMP +1 ,I8K_MAX_TEMP +1 ,I8K_MAX_TEMP +1 ,I8K_MAX_TEMP +1 };#endif regs.ebx = sensor &0xff ; rc =i8k_smm (®s);
@@ -317,10 +317,12 @@ static int i8k_get_temp(int sensor)*/ if (temp >I8K_MAX_TEMP ) { temp = prev[sensor]; - prev[sensor] =I8K_MAX_TEMP ; + prev[sensor] =I8K_MAX_TEMP +1 ; }else { prev[sensor] = temp; } +if (temp >I8K_MAX_TEMP ) +return -ERANGE ;#endif return temp;
@@ -499,6 +501,8 @@ static ssize_t i8k_hwmon_show_temp(struct device *dev,int temp; temp =i8k_get_temp (index); +if (temp == -ERANGE ) +return -EINVAL ;if (temp <0 )return temp;return sprintf (buf,"%d\n" , temp *1000 );
@@ -610,17 +614,17 @@ static int __init i8k_init_hwmon(void)/* CPU temperature attributes, if temperature reading is OK */ err =i8k_get_temp (0 ); -if (err >=0 ) +if (err >=0 || err == -ERANGE ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP1 ;/* check for additional temperature sensors */ err =i8k_get_temp (1 ); -if (err >=0 ) +if (err >=0 || err == -ERANGE ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP2 ; err =i8k_get_temp (2 ); -if (err >=0 ) +if (err >=0 || err == -ERANGE ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP3 ; err =i8k_get_temp (3 ); -if (err >=0 ) +if (err >=0 || err == -ERANGE ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP4 ;/* Left fan attributes, if left fan is present */
Signature · 1 line
1.7.9.5
Re: [PATCH] i8k: Fix temperature bug handling in i8k_get_temp()
Quoted 26 lines · Pali Rohár
Static array prev[] was incorrectly initialized. It should be initialized to some "invalid" temperature value (above
I8K_MAX_TEMP).Next, function should store "invalid" value to prev[] (above
I8K_MAX_TEMP), not valid (=I8K_MAX_TEMP) because whole temperature bug handling will not work.And last part, to not break existing detection of temperature sensors, register them also if i8k report too high temperature (above
I8K_MAX_TEMP). This is needed because some sensors are sometimes turned off (e.g sensor on GPU which can be turned off/on) and in this case SMM report too high value.To prevent reporting "invalid" values to userspace, return
-EINVAL. In this case sensors which are currently turned off (e.g optimus/powerexpress/enduro gpu) are reported as "N/A" by lm-sensors package.Signed-off-by Pali Rohár <[email protected]>--- drivers/char/i8k.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)drivers/char/i8k.c +0
-0
drivers/char/i8k.c static int i8k_get_temp(int sensor) · line 301
Quoted 5 lines
drivers/char/i8k.c +1
-1@@ -298,7 +298,7 @@ static int i8k_get_temp(int sensor)int temp;#ifdef I8K_TEMPERATURE_BUG -static int prev[4 ]; +static int prev[4 ] = {I8K_MAX_TEMP +1 ,I8K_MAX_TEMP +1 ,I8K_MAX_TEMP +1 ,I8K_MAX_TEMP +1 };
This results in a checkpatch warning. Please split, and add a space before and after '+'. Actually, I would suggest to use something something like
#define I8K_INVALID_TEMP (I8K_MAX_TEMP + 1)
and to use it instead of hard-coding "I8K_MAX_TEMP + 1" in the code.
Quoted 51 lines
drivers/char/i8k.c +9
-5#endif regs.ebx = sensor &0xff ; rc =i8k_smm (®s);@@ -317,10 +317,12 @@ static int i8k_get_temp(int sensor)*/ if (temp >I8K_MAX_TEMP ) { temp = prev[sensor]; - prev[sensor] =I8K_MAX_TEMP ; + prev[sensor] =I8K_MAX_TEMP +1 ; }else { prev[sensor] = temp; } +if (temp >I8K_MAX_TEMP ) +return -ERANGE ;#endif return temp;@@ -499,6 +501,8 @@ static ssize_t i8k_hwmon_show_temp(struct device *dev,int temp; temp =i8k_get_temp (index); +if (temp == -ERANGE ) +return -EINVAL ;if (temp <0 )return temp;return sprintf (buf,"%d\n" , temp *1000 );@@ -610,17 +614,17 @@ static int __init i8k_init_hwmon(void)/* CPU temperature attributes, if temperature reading is OK */ err =i8k_get_temp (0 ); -if (err >=0 ) +if (err >=0 || err == -ERANGE ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP1 ;/* check for additional temperature sensors */ err =i8k_get_temp (1 ); -if (err >=0 ) +if (err >=0 || err == -ERANGE ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP2 ; err =i8k_get_temp (2 ); -if (err >=0 ) +if (err >=0 || err == -ERANGE ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP3 ; err =i8k_get_temp (3 ); -if (err >=0 ) +if (err >=0 || err == -ERANGE ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP4 ;/* Left fan attributes, if left fan is present */ Signature · 1 line
1.7.9.5
Re: [PATCH] i8k: Fix temperature bug handling in i8k_get_temp()
Quoted 18 lines · On Sunday 30 November 2014 01:12:07 Guenter Roeck wrote:
drivers/char/i8k.c static int i8k_get_temp(int sensor) · line 304
Quoted 13 lines
drivers/char/i8k.c +1
-1@@ -298,7 +298,7 @@ static int i8k_get_temp(int sensor)int temp;#ifdef I8K_TEMPERATURE_BUG -static int prev[4 ]; +static int prev[4 ] = {I8K_MAX_TEMP +1 ,I8K_MAX_TEMP +1 ,I8K_MAX_TEMP +1 ,I8K_MAX_TEMP +1 };This results in a checkpatch warning. Please split, and add a space before and after '+'. Actually, I would suggest to use something something like
Quoted 4 lines
#define
I8K_INVALID_TEMP(I8K_MAX_TEMP+ 1)and to use it instead of hard-coding "
I8K_MAX_TEMP+ 1" in the code.
I will define I8K_INVALID_TEMP and use it instead I8K_MAX_TEMP.
Signature · 2 lines
Pali Rohár [email protected]
Re: [PATCH] i8k: Fix temperature bug handling in i8k_get_temp()
In reply to Pali RohárQuoted 35 lines · Pali Rohár
Static array prev[] was incorrectly initialized. It should be initialized to some "invalid" temperature value (above
I8K_MAX_TEMP).Next, function should store "invalid" value to prev[] (above
I8K_MAX_TEMP), not valid (=I8K_MAX_TEMP) because whole temperature bug handling will not work.And last part, to not break existing detection of temperature sensors, register them also if i8k report too high temperature (above
I8K_MAX_TEMP). This is needed because some sensors are sometimes turned off (e.g sensor on GPU which can be turned off/on) and in this case SMM report too high value.To prevent reporting "invalid" values to userspace, return
-EINVAL. In this case sensors which are currently turned off (e.g optimus/powerexpress/enduro gpu) are reported as "N/A" by lm-sensors package.Signed-off-by Pali Rohár <[email protected]>--- drivers/char/i8k.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)drivers/char/i8k.c +1
-1@@ -298,7 +298,7 @@ static int i8k_get_temp(int sensor)int temp;#ifdef I8K_TEMPERATURE_BUG -static int prev[4 ]; +static int prev[4 ] = {I8K_MAX_TEMP +1 ,I8K_MAX_TEMP +1 ,I8K_MAX_TEMP +1 ,I8K_MAX_TEMP +1 };#endif regs.ebx = sensor &0xff ; rc =i8k_smm (®s);
drivers/char/i8k.c static int i8k_get_temp(int sensor) · line 325
Quoted 10 lines
drivers/char/i8k.c +3
-1@@ -317,10 +317,12 @@ static int i8k_get_temp(int sensor)*/ if (temp >I8K_MAX_TEMP ) { temp = prev[sensor]; - prev[sensor] =I8K_MAX_TEMP ; + prev[sensor] =I8K_MAX_TEMP +1 ; }else { prev[sensor] = temp; } +if (temp >I8K_MAX_TEMP ) +return -ERANGE ;
Can we return -ENODATA in this case ? I think that would be more appropriate.
drivers/char/i8k.c static ssize_t i8k_hwmon_show_temp(struct device *dev, · line 505
Quoted 9 lines
drivers/char/i8k.c +2
-0#endif return temp;@@ -499,6 +501,8 @@ static ssize_t i8k_hwmon_show_temp(struct device *dev,int temp; temp =i8k_get_temp (index); +if (temp == -ERANGE ) +return -EINVAL ;
and can we also return -ENODATA to user space ?
This would make the code a bit cleaner.
Thanks,
Guenter
Re: [PATCH] i8k: Fix temperature bug handling in i8k_get_temp()
Quoted 61 lines · On Sunday 30 November 2014 10:00:00 Guenter Roeck wrote:
Quoted 60 lines · Pali Rohár
Static array prev[] was incorrectly initialized. It should be initialized to some "invalid" temperature value (above
I8K_MAX_TEMP).Next, function should store "invalid" value to prev[] (above
I8K_MAX_TEMP), not valid (=I8K_MAX_TEMP) because whole temperature bug handling will not work.And last part, to not break existing detection of temperature sensors, register them also if i8k report too high temperature (above
I8K_MAX_TEMP). This is needed because some sensors are sometimes turned off (e.g sensor on GPU which can be turned off/on) and in this case SMM report too high value.To prevent reporting "invalid" values to userspace, return
-EINVAL. In this case sensors which are currently turned off (e.g optimus/powerexpress/enduro gpu) are reported as "N/A" by lm-sensors package.Signed-off-by Pali Rohár <[email protected]>---
drivers/char/i8k.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)drivers/char/i8k.c +1
-1@@ -298,7 +298,7 @@ static int i8k_get_temp(int sensor)int temp;#ifdef I8K_TEMPERATURE_BUG -static int prev[4 ]; +static int prev[4 ] = {I8K_MAX_TEMP +1 ,I8K_MAX_TEMP +1 ,I8K_MAX_TEMP +1 ,I8K_MAX_TEMP +1 };#endif regs.ebx = sensor & 0xff; rc = i8k_smm(®s);drivers/char/i8k.c +1
-1@@ -317,10 +317,12 @@ static int i8k_get_temp(int sensor)*/ if (temp >I8K_MAX_TEMP ) { temp = prev[sensor]; - prev[sensor] =I8K_MAX_TEMP ; + prev[sensor] =I8K_MAX_TEMP +1 ; }else { prev[sensor] = temp;
Quoted 8 lines
drivers/char/i8k.c static int i8k_get_temp(int sensor) · line 325
Quoted 4 lines
}drivers/char/i8k.c +2
-0+if (temp >I8K_MAX_TEMP ) +return -ERANGE ;Can we return
-ENODATAin this case ? I think that would be more appropriate.
This is internal kernel function, no problem. If you prefer NODATA instead RANGE I will change it.
Quoted 11 lines
Quoted 11 lines
#endifreturn temp;
drivers/char/i8k.c +0
-0@@ -499,6 +501,8 @@ static ssize_t i8k_hwmon_show_temp(struct device *dev, int temp; temp =i8k_get_temp (index);
Quoted 8 lines
drivers/char/i8k.c static ssize_t i8k_hwmon_show_temp(struct device *dev, · line 505
Quoted 2 lines
drivers/char/i8k.c +2
-0+if (temp == -ERANGE ) +return -EINVAL ;and can we also return
-ENODATAto user space ?
This would make the code a bit cleaner.Thanks,
Guenter
There was some problems when I tested similar patch for radeon.ko (do not report temperature to userspace when card is turned off).
I can test lm-sensors which is in Ubuntu 12.04 LTS (there is probably some older version) what happens with -ENODATA from i8k.
Signature · 2 lines
Pali Rohár [email protected]
Re: [PATCH] i8k: Fix temperature bug handling in i8k_get_temp()
On 11/30/2014 06:48 AM, Pali Rohár wrote:
[ ... ]
Quoted 11 lines
Quoted 7 lines
drivers/char/i8k.c static int i8k_get_temp(int sensor) · line 325
Quoted 3 lines
drivers/char/i8k.c +2
-0+if (temp >I8K_MAX_TEMP ) +return -ERANGE ;Can we return
-ENODATAin this case ? I think that would be more appropriate.This is internal kernel function, no problem. If you prefer NODATA instead RANGE I will change it.
The idea was to return ENODATA to user space (see below).
Quoted 17 lines
Quoted 17 lines
drivers/char/i8k.c static ssize_t · line 508
Quoted 13 lines
#endifreturn temp;drivers/char/i8k.c +2
-0@@ -499,6 +501,8 @@ static ssize_t i8k_hwmon_show_temp(struct device *dev, int temp; temp =i8k_get_temp (index); +if (temp == -ERANGE ) +return -EINVAL ;and can we also return
-ENODATAto user space ?
This would make the code a bit cleaner.
Quoted 6 lines
Quoted 2 lines
Thanks,
GuenterThere was some problems when I tested similar patch for radeon.ko (do not report temperature to userspace when card is turned off).
You mean when returning -ENODATA to user space ?
I tested that; it worked for me and does what we want it to do (the sensors command to displays N/A). This would avoid having to change -ERANGE to a different error code above.
Guenter
Re: [PATCH] i8k: Fix temperature bug handling in i8k_get_temp()
Quoted 38 lines · On Sunday 30 November 2014 16:56:32 Guenter Roeck wrote:
On 11/30/2014 06:48 AM, Pali Rohár wrote:
[ ... ]Quoted 8 lines
Quoted 5 lines
drivers/char/i8k.c static int i8k_get_temp(int sensor) · line 325
Quoted 2 lines
drivers/char/i8k.c +2
-0+if (temp >I8K_MAX_TEMP ) +return -ERANGE ;Can we return
-ENODATAin this case ? I think that would be more appropriate.This is internal kernel function, no problem. If you prefer NODATA instead RANGE I will change it.
The idea was to return ENODATA to user space (see below).
Quoted 17 lines
Quoted 17 lines
drivers/char/i8k.c static ssize_t · line 508
Quoted 13 lines
#endifreturn temp;drivers/char/i8k.c +2
-0@@ -499,6 +501,8 @@ static ssize_t i8k_hwmon_show_temp(struct device *dev, int temp; temp =i8k_get_temp (index); +if (temp == -ERANGE ) +return -EINVAL ;and can we also return
-ENODATAto user space ?
This would make the code a bit cleaner.Quoted 6 lines
Quoted 2 lines
Thanks,
GuenterThere was some problems when I tested similar patch for radeon.ko (do not report temperature to userspace when card is turned off).
Quoted 6 lines
You mean when returning
-ENODATAto user space ?
I tested that; it worked for me and does what we want it to do (the sensors command to displays N/A). This would avoid having to change-ERANGEto a different error code above.Guenter
Now I tested it too on Ubuntu and it working. sensors display N/A without error message. So I will change code.
Signature · 2 lines
Pali Rohár [email protected]