treewide: Fix typo in Documentation/DocBook/device-drivers
Subsystems (2)
PATCH 1/1 treewide: Fix typo in Documentation/DocBook/device-drivers
This patch fix speeling typo found in html files within Documentation/DocBook/device-drivers.
It is because html files are generated from comments in source, so I have to fix comments in the source.
--- drivers/dma-buf/fence.c | 2 +- include/linux/fence.h | 4 ++-- include/linux/i2c.h | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-)
drivers/dma-buf/fence.c +1 -1
@@ -283,7 +283,7 @@ EXPORT_SYMBOL(fence_add_callback);* @cb: [in] the callback to remove * * Remove a previously queued callback from the fence. This function returns -* true if the callback is succesfully removed, or false if the fence has +* true if the callback is successfully removed, or false if the fence has * already been signaled. * * *WARNING*:
include/linux/fence.h +2 -2
@@ -128,8 +128,8 @@ struct fence_cb {* from irq context, so normal spinlocks can be used. * * A return value of false indicates the fence already passed, -* or some failure occured that made it impossible to enable -* signaling. True indicates succesful enabling. +* or some failure occurred that made it impossible to enable +* signaling. True indicates successful enabling. * * fence->status may be set in enable_signaling, but only when false is * returned.
include/linux/i2c.h +1 -1
@@ -359,7 +359,7 @@ i2c_register_board_info(int busnum, struct i2c_board_info const *info,* to name two of the most common. * * The return codes from the @master_xfer field should indicate the type of -* error code that occured during the transfer, as documented in the kernel +* error code that occurred during the transfer, as documented in the kernel * Documentation file Documentation/i2c/fault-codes. */ struct i2c_algorithm {
Signature · 1 line
2.1.2.451.g98349e5
Quoted 6 lines · Masanari Iida
This patch fix speeling typo found in html files within
Documentation/DocBook/device-drivers.
It is because html files are generated from comments in source, so I have to fix comments in the source.Signed-off-by Masanari Iida <[email protected]>
Thanks.
Quoted 5 lines
--- drivers/dma-buf/fence.c | 2 +- include/linux/fence.h | 4 ++-- include/linux/i2c.h | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-)
Signature · 1 line
~Randy
Quoted 6 lines · On Wed, 22 Oct 2014 00:00:14 +0900 Masanari Iida <[email protected]> wrote:
This patch fix speeling typo found in html files within
Documentation/DocBook/device-drivers.
It is because html files are generated from comments in source, so I have to fix comments in the source.Signed-off-by Masanari Iida <[email protected]>
I can pick this up, I guess. But I'll copy the relevant subsystem maintainers just in case they would rather carry the changes themselves.
jon
Quoted 47 lines
--- drivers/dma-buf/fence.c | 2 +- include/linux/fence.h | 4 ++-- include/linux/i2c.h | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-)drivers/dma-buf/fence.c +1
-1@@ -283,7 +283,7 @@ EXPORT_SYMBOL(fence_add_callback);* @cb: [in] the callback to remove * * Remove a previously queued callback from the fence. This function returns -* true if the callback is succesfully removed, or false if the fence has +* true if the callback is successfully removed, or false if the fence has * already been signaled. * * *WARNING*: include/linux/fence.h +2
-2@@ -128,8 +128,8 @@ struct fence_cb {* from irq context, so normal spinlocks can be used. * * A return value of false indicates the fence already passed, -* or some failure occured that made it impossible to enable -* signaling. True indicates succesful enabling. +* or some failure occurred that made it impossible to enable +* signaling. True indicates successful enabling. * * fence->status may be set in enable_signaling, but only when false is * returned. include/linux/i2c.h +1
-1@@ -359,7 +359,7 @@ i2c_register_board_info(int busnum, struct i2c_board_info const *info,* to name two of the most common. * * The return codes from the @master_xfer field should indicate the type of -* error code that occured during the transfer, as documented in the kernel +* error code that occurred during the transfer, as documented in the kernel * Documentation file Documentation/i2c/fault-codes. */ struct i2c_algorithm {
Wolfram Sang
Acked-byQuoted 8 lines · Jonathan Corbet
Quoted 5 lines · On Wed, 22 Oct 2014 00:00:14 +0900 Masanari Iida <[email protected]> wrote:
This patch fix speeling typo found in html files within
Documentation/DocBook/device-drivers.
It is because html files are generated from comments in source, so I have to fix comments in the source.
Quoted 4 lines
Quoted 1 line
Signed-off-by Masanari Iida <[email protected]>I can pick this up, I guess. But I'll copy the relevant subsystem maintainers just in case they would rather carry the changes themselves.
For I2C: