Skip to contentSkip to conversation

drm/i915: MIPI Timings related changes for dual link

PATCH New Gaurav K Singh 1 participant 1 message Oct 29, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 9/11 drm/i915: MIPI Timings related changes for dual link

hactive, hfp, hbp, hsync needs to be halved for dual link MIPI Panels. Accordingly timing related mmio regs needs to be programmed for both MIPI Ports.

v2: Address review comments by Jani
- Used a for loop instead of do-while loop

---
 drivers/gpu/drm/i915/intel_dsi.c |   36 ++++++++++++++++++++++++++----------
 1 file changed, 26 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/intel_dsi.c +26 -10
index c285b4a..e00dcd8 100644
@@ -504,12 +504,23 @@ static void set_dsi_timings(struct drm_encoder *encoder,
 	unsigned int lane_count = intel_dsi->lane_count;
 
 	u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
+	int count;
 
 	hactive = mode->hdisplay;
 	hfp = mode->hsync_start - mode->hdisplay;
 	hsync = mode->hsync_end - mode->hsync_start;
 	hbp = mode->htotal - mode->hsync_end;
 
+	if (intel_dsi->dual_link) {
+		hactive /= 2;
+		if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
+			hactive += intel_dsi->pixel_overlap;
+		hfp /= 2;
+		hsync /= 2;
+		hbp /= 2;
+		count = 2;
+	}
+
 	vfp = mode->vsync_start - mode->vdisplay;
 	vsync = mode->vsync_end - mode->vsync_start;
 	vbp = mode->vtotal - mode->vsync_end;
@@ -522,18 +533,23 @@ static void set_dsi_timings(struct drm_encoder *encoder,
 			    intel_dsi->burst_mode_ratio);
 	hbp = txbyteclkhs(hbp, bpp, lane_count, intel_dsi->burst_mode_ratio);
 
-	I915_WRITE(MIPI_HACTIVE_AREA_COUNT(port), hactive);
-	I915_WRITE(MIPI_HFP_COUNT(port), hfp);
+	for (count = 0; count < (intel_dsi->dual_link ? 2 : 1); count++) {
+		I915_WRITE(MIPI_HACTIVE_AREA_COUNT(port), hactive);
+		I915_WRITE(MIPI_HFP_COUNT(port), hfp);
 
-	/* meaningful for video mode non-burst sync pulse mode only, can be zero
-	 * for non-burst sync events and burst modes */
-	I915_WRITE(MIPI_HSYNC_PADDING_COUNT(port), hsync);
-	I915_WRITE(MIPI_HBP_COUNT(port), hbp);
+		/* meaningful for video mode non-burst sync pulse mode only,
+		 * can be zero for non-burst sync events and burst modes */
+		I915_WRITE(MIPI_HSYNC_PADDING_COUNT(port), hsync);
+		I915_WRITE(MIPI_HBP_COUNT(port), hbp);
 
-	/* vertical values are in terms of lines */
-	I915_WRITE(MIPI_VFP_COUNT(port), vfp);
-	I915_WRITE(MIPI_VSYNC_PADDING_COUNT(port), vsync);
-	I915_WRITE(MIPI_VBP_COUNT(port), vbp);
+		/* vertical values are in terms of lines */
+		I915_WRITE(MIPI_VFP_COUNT(port), vfp);
+		I915_WRITE(MIPI_VSYNC_PADDING_COUNT(port), vsync);
+		I915_WRITE(MIPI_VBP_COUNT(port), vbp);
+
+		if (intel_dsi->dual_link)
+			port = PORT_B;
+	}
 }
 
 static void intel_dsi_prepare(struct intel_encoder *intel_encoder)
Signature · 6 lines
1.7.9.5

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx