imx:mx6sl_pins add pad settings for usb
Subsystems (2)
PATCH 1/2 imx:mx6sl_pins add pad settings for usb
Add pad settings for usb support.
This patch "imx:mx6slevk add usb support" missed to add pad definition.
--- arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/include/asm/arch-mx6/mx6sl_pins.h +5 -0
@@ -34,5 +34,10 @@ enum {MX6_PAD_FEC_REF_CLK__FEC_REF_OUT =IOMUX_PAD (0x424 ,0x134 ,0x10 ,0x000 ,0 ,0 ),MX6_PAD_FEC_RX_ER__GPIO_4_19 =IOMUX_PAD (0x0428 ,0x0138 ,5 ,0x0000 ,0 ,0 ),MX6_PAD_FEC_TX_CLK__GPIO_4_21 =IOMUX_PAD (0x0434 ,0x0144 ,5 ,0x0000 ,0 ,0 ), + +MX6_PAD_EPDC_PWRCOM__ANATOP_USBOTG1_ID =IOMUX_PAD (0x03D0 ,0x00E0 ,4 ,0x05DC ,0 ,0 ), + +MX6_PAD_KEY_COL4__USB_USBOTG1_PWR =IOMUX_PAD (0x0484 ,0x017C ,6 ,0x0000 ,0 ,0 ), + MX6_PAD_KEY_COL5__USB_USBOTG2_PWR = IOMUX_PAD(0x0488, 0x0180, 6, 0x0000, 0, 0), };#endif /* __ASM_ARCH_MX6_MX6SL_PINS_H__ */
Signature · 1 line
1.8.4.5
PATCH 2/2 arm:imx-common add function prototype for gpr set
This patch "arm:imx-common introduce a new function to set gpr" missed to add the function prototype.
--- arch/arm/include/asm/imx-common/iomux-v3.h | 3 +++ 1 file changed, 3 insertions(+)
arch/arm/include/asm/imx-common/iomux-v3.h +3 -0
@@ -182,6 +182,9 @@ typedef u64 iomux_v3_cfg_t;void imx_iomux_v3_setup_pad (iomux_v3_cfg_t pad);void imx_iomux_v3_setup_multiple_pads (iomux_v3_cfg_t const *pad_list,unsigned count); +/* Set bits for general purpose registers */ +void mxc_iomux_set_gpr_register (int group,int start_bit,int num_bits, +int value);/* macros for declaring and using pinmux array */ #if defined(CONFIG_MX6QDL )
Signature · 1 line
1.8.4.5
PATCH 2/2 arm:imx-common add function prototype for gpr set
Hi Peng,
Quoted 3 lines · Peng Fan
This patch "arm:imx-common introduce a new function to set gpr" missed to add the function prototype.
A fix of a previous patch makes sense when the patch was already merged. In that case, the fix should also have in the message the commit-id of the patch causing the issue.
Your patches are not yet merged: please send a new version of the patchset fixing the issues you have found.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
Fabio Estevam
reviewerPATCH 1/2 imx:mx6sl_pins add pad settings for usb
In reply to Peng FanQuoted 4 lines · Peng Fan
Add pad settings for usb support.
This patch "imx:mx6slevk add usb support" missed to add pad definition.
Then please resend the patch with the pad definition.
Thanks