Skip to contentSkip to conversation

backports: add kernel integration support

PATCH Superseded Luis R. Rodriguez 4 participants 37 messages Nov 5, 2014

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover backports: add kernel integration support

From: "Luis R. Rodriguez" <[email protected]>

Here's a v2 series on kernel integration support. This addresses the expresed concerns over killing the versions file for packaging. While at it it also addresses avoiding the double prefix issue by prefixing the things we carry over with the copy trick with BPAUTO, and removing the BACKPORT prefix all together from the kernel versions we backport.

Luis R. Rodriguez (13):
backports: move legacy and SmPL patch application into helper
backports: ifdef around module_init() module_exit() for modules
backports: allow for different backport prefix
backports: replace BACKPORT_PWD with BACKPORT_DIR
backports: use BACKPORT_DIR prefix on kconfig sources
backports: update dependencies map file
backports: split Kconfig into Kconfig.package and Kconfig.sources
backports: move version file generation to run earlier
backports: define C code backport version info using CPTCFG_
backports: add backport version parsing for kernel integration
backports: prefix c-file / h-file auto backport with BPAUTO
backports: remove extra BACKPORT_ prefix from kernel versioning
backports: add full kernel integration support

 backport/Kconfig                                   |  47 --
 backport/Kconfig.integrate                         |  36 ++
 backport/Kconfig.package                           |  32 ++
 backport/Kconfig.sources                           |  23 +
 backport/Makefile                                  |   8 +-
 backport/Makefile.build                            |   4 +-
 backport/Makefile.kernel                           |  19 +-
 backport/Makefile.real                             |   2 +-
 backport/backport-include/asm/dma-mapping.h        |   4 +-
 backport/backport-include/backport/backport.h      |   5 +
 backport/backport-include/backport/leds-disabled.h |   2 +-
 backport/backport-include/linux/module.h           |   8 +-
 backport/compat/Kconfig                            |  84 ++--
 backport/compat/Makefile                           |  42 +-
 backport/compat/backports.h                        |   4 +-
 backport/compat/main.c                             |  40 +-
 backport/scripts/uninstall.sh                      |   4 +-
 dependencies                                       |  31 +-
 devel/doc/kconfig-operation                        |  13 +-
 gentree.py                                         | 487 +++++++++++++--------
 .../0001-enable-backports-built-in.patch           |  40 ++
 lib/bpversion.py                                   |  48 ++
 lib/kconfig.py                                     | 164 ++++++-
 patches/backport-adjustments/devcoredump.patch     |   4 +-
 .../media/0002-no_dmabuf/v4l2.patch                |   6 +-
 25 files changed, 800 insertions(+), 357 deletions(-)
 delete mode 100644 backport/Kconfig
 create mode 100644 backport/Kconfig.integrate
 create mode 100644 backport/Kconfig.package
 create mode 100644 backport/Kconfig.sources
 create mode 100644 integration-patches/0001-enable-backports/0001-enable-backports-built-in.patch
 create mode 100644 lib/bpversion.py
Signature · 1 line
2.1.1
#1 lore raw

PATCH v2 1/13 backports: move legacy and SmPL patch application into helper

From: "Luis R. Rodriguez" <[email protected]>

This allows us to extend how backports uses patches for different types of applications. This will later be used for kernel integration support, for example.

This should have no functional change.

---
 gentree.py | 279 +++++++++++++++++++++++++++++++------------------------------
 1 file changed, 144 insertions(+), 135 deletions(-)
gentree.py +144 -135
index 9b4db98..59ae19d 100755
@@ -438,6 +438,149 @@ def upload_release(args, rel_prep, logwrite=lambda x:None):
         kup_cmd = "kup put /\n\t\t%s /\n\t\t%s /\n\t\t%s" % (gzip_name, tar_name + '.asc', korg_path)
         logwrite("kup-test: skipping cmd: %s" % kup_cmd)
 
+def apply_patches(args, desc, source_dir, patch_src, target_dir, logwrite=lambda x:None):
+    """
+    Given a path of a directories of patches and SmPL patches apply
+    them on the target directory. If requested refresh patches, or test
+    a specific SmPL patch.
+    """
+    logwrite('Applying patches from %s to %s ...' % (patch_src, target_dir))
+    test_cocci = args.test_cocci or args.profile_cocci
+    test_cocci_found = False
+    patches = []
+    sempatches = []
+    for root, dirs, files in os.walk(os.path.join(source_dir, patch_src)):
+        for f in files:
+            if not test_cocci and f.endswith('.patch'):
+                patches.append(os.path.join(root, f))
+            if f.endswith('.cocci'):
+                if test_cocci:
+                    if f not in test_cocci:
+                        continue
+                    test_cocci_found = True
+                    if args.test_cocci:
+                        logwrite("Testing Coccinelle SmPL patch: %s" % test_cocci)
+                    elif args.profile_cocci:
+                        logwrite("Profiling Coccinelle SmPL patch: %s" % test_cocci)
+                sempatches.append(os.path.join(root, f))
+    patches.sort()
+    prefix_len = len(os.path.join(source_dir, patch_src)) + 1
+    for pfile in patches:
+        print_name = pfile[prefix_len:]
+        # read the patch file
+        p = patch.fromfile(pfile)
+        # complain if it's not a patch
+        if not p:
+            raise Exception('No patch content found in %s' % print_name)
+        # leading / seems to be stripped?
+        if 'dev/null' in p.items[0].source:
+            raise Exception('Patches creating files are not supported (in %s)' % print_name)
+        # check if the first file the patch touches exists, if so
+        # assume the patch needs to be applied -- otherwise continue
+        patched_file = '/'.join(p.items[0].source.split('/')[1:])
+        fullfn = os.path.join(target_dir, patched_file)
+        if not os.path.exists(fullfn):
+            if args.verbose:
+                logwrite("Not applying %s, not needed" % print_name)
+            continue
+        if args.verbose:
+            logwrite("Applying patch %s" % print_name)
+
+        if args.refresh:
+            # but for refresh, of course look at all files the patch touches
+            for patchitem in p.items:
+                patched_file = '/'.join(patchitem.source.split('/')[1:])
+                fullfn = os.path.join(target_dir, patched_file)
+                shutil.copyfile(fullfn, fullfn + '.orig_file')
+
+        process = subprocess.Popen(['patch', '-p1'], stdout=subprocess.PIPE,
+                                   stderr=subprocess.STDOUT, stdin=subprocess.PIPE,
+                                   close_fds=True, universal_newlines=True,
+                                   cwd=target_dir)
+        output = process.communicate(input=open(pfile, 'r').read())[0]
+        output = output.split('\n')
+        if output[-1] == '':
+            output = output[:-1]
+        if args.verbose:
+            for line in output:
+                logwrite('> %s' % line)
+        if process.returncode != 0:
+            if not args.verbose:
+                logwrite("Failed to apply changes from %s" % print_name)
+                for line in output:
+                    logwrite('> %s' % line)
+            raise Exception('Patch failed')
+
+        if args.refresh:
+            pfilef = open(pfile + '.tmp', 'a')
+            pfilef.write(p.top_header)
+            pfilef.flush()
+            for patchitem in p.items:
+                patched_file = '/'.join(patchitem.source.split('/')[1:])
+                fullfn = os.path.join(target_dir, patched_file)
+                process = subprocess.Popen(['diff', '-p', '-u', patched_file + '.orig_file', patched_file,
+                                            '--label', 'a/' + patched_file,
+                                            '--label', 'b/' + patched_file],
+                                           stdout=pfilef, close_fds=True,
+                                           universal_newlines=True, cwd=target_dir)
+                process.wait()
+                os.unlink(fullfn + '.orig_file')
+                if not process.returncode in (0, 1):
+                    logwrite("Failed to diff to refresh %s" % print_name)
+                    pfilef.close()
+                    os.unlink(pfile + '.tmp')
+                    raise Exception('Refresh failed')
+            pfilef.close()
+            os.rename(pfile + '.tmp', pfile)
+
+        # remove orig/rej files that patch sometimes creates
+        for root, dirs, files in os.walk(target_dir):
+            for f in files:
+                if f[-5:] == '.orig' or f[-4:] == '.rej':
+                    os.unlink(os.path.join(root, f))
+        git_debug_snapshot(args, "apply %s patch %s" % (desc, print_name))
+
+    sempatches.sort()
+    prefix_len = len(os.path.join(source_dir, patch_src)) + 1
+
+    for cocci_file in sempatches:
+        # Until Coccinelle picks this up
+        pycocci = os.path.join(source_dir, 'devel/pycocci')
+        cmd = [pycocci, cocci_file]
+        extra_spatch_args = []
+        if args.profile_cocci:
+            cmd.append('--profile-cocci')
+        cmd.append(os.path.abspath(target_dir))
+        print_name = cocci_file[prefix_len:]
+        if args.verbose:
+            logwrite("Applying SmPL patch %s" % print_name)
+        sprocess = subprocess.Popen(cmd,
+                                    stdout=subprocess.PIPE, stderr=subprocess.STDOUT,
+                                    close_fds=True, universal_newlines=True,
+                                    cwd=target_dir)
+        output = sprocess.communicate()[0]
+        sprocess.wait()
+        if sprocess.returncode != 0:
+            logwrite("Failed to process SmPL patch %s" % print_name)
+            raise Exception('SmPL patch failed')
+        output = output.split('\n')
+        if output[-1] == '':
+            output = output[:-1]
+        if args.verbose:
+            for line in output:
+                logwrite('> %s' % line)
+
+        # remove cocci_backup files
+        for root, dirs, files in os.walk(target_dir):
+            for f in files:
+                if f.endswith('.cocci_backup'):
+                    os.unlink(os.path.join(root, f))
+        git_debug_snapshot(args, "apply %s SmPL patch %s" % (desc, print_name))
+
+    if test_cocci and test_cocci_found:
+        logwrite('Done!')
+        sys.exit(0)
+
 def _main():
     # Our binary requirements go here
     req = reqs.Req()
@@ -620,141 +763,7 @@ def process(kerneldir, outdir, copy_list_file, git_revision=None,
         bpcfg.disable_symbols(disable_list)
     git_debug_snapshot(args, 'Add automatic backports')
 
-    test_cocci = args.test_cocci or args.profile_cocci
-
-    logwrite('Apply patches ...')
-    patches = []
-    sempatches = []
-    for root, dirs, files in os.walk(os.path.join(source_dir, 'patches')):
-        for f in files:
-            if not test_cocci and f.endswith('.patch'):
-                patches.append(os.path.join(root, f))
-            if f.endswith('.cocci'):
-                if test_cocci:
-                    if f not in test_cocci:
-                        continue
-                    if args.test_cocci:
-                        logwrite("Testing Coccinelle SmPL patch: %s" % test_cocci)
-                    elif args.profile_cocci:
-                        logwrite("Profiling Coccinelle SmPL patch: %s" % test_cocci)
-                sempatches.append(os.path.join(root, f))
-    patches.sort()
-    prefix_len = len(os.path.join(source_dir, 'patches')) + 1
-    for pfile in patches:
-        print_name = pfile[prefix_len:]
-        # read the patch file
-        p = patch.fromfile(pfile)
-        # complain if it's not a patch
-        if not p:
-            raise Exception('No patch content found in %s' % print_name)
-        # leading / seems to be stripped?
-        if 'dev/null' in p.items[0].source:
-            raise Exception('Patches creating files are not supported (in %s)' % print_name)
-        # check if the first file the patch touches exists, if so
-        # assume the patch needs to be applied -- otherwise continue
-        patched_file = '/'.join(p.items[0].source.split('/')[1:])
-        fullfn = os.path.join(args.outdir, patched_file)
-        if not os.path.exists(fullfn):
-            if args.verbose:
-                logwrite("Not applying %s, not needed" % print_name)
-            continue
-        if args.verbose:
-            logwrite("Applying patch %s" % print_name)
-
-        if args.refresh:
-            # but for refresh, of course look at all files the patch touches
-            for patchitem in p.items:
-                patched_file = '/'.join(patchitem.source.split('/')[1:])
-                fullfn = os.path.join(args.outdir, patched_file)
-                shutil.copyfile(fullfn, fullfn + '.orig_file')
-
-        process = subprocess.Popen(['patch', '-p1'], stdout=subprocess.PIPE,
-                                   stderr=subprocess.STDOUT, stdin=subprocess.PIPE,
-                                   close_fds=True, universal_newlines=True,
-                                   cwd=args.outdir)
-        output = process.communicate(input=open(pfile, 'r').read())[0]
-        output = output.split('\n')
-        if output[-1] == '':
-            output = output[:-1]
-        if args.verbose:
-            for line in output:
-                logwrite('> %s' % line)
-        if process.returncode != 0:
-            if not args.verbose:
-                logwrite("Failed to apply changes from %s" % print_name)
-                for line in output:
-                    logwrite('> %s' % line)
-            return 2
-
-        if args.refresh:
-            pfilef = open(pfile + '.tmp', 'a')
-            pfilef.write(p.top_header)
-            pfilef.flush()
-            for patchitem in p.items:
-                patched_file = '/'.join(patchitem.source.split('/')[1:])
-                fullfn = os.path.join(args.outdir, patched_file)
-                process = subprocess.Popen(['diff', '-p', '-u', patched_file + '.orig_file', patched_file,
-                                            '--label', 'a/' + patched_file,
-                                            '--label', 'b/' + patched_file],
-                                           stdout=pfilef, close_fds=True,
-                                           universal_newlines=True, cwd=args.outdir)
-                process.wait()
-                os.unlink(fullfn + '.orig_file')
-                if not process.returncode in (0, 1):
-                    logwrite("Failed to diff to refresh %s" % print_name)
-                    pfilef.close()
-                    os.unlink(pfile + '.tmp')
-                    return 3
-            pfilef.close()
-            os.rename(pfile + '.tmp', pfile)
-
-        # remove orig/rej files that patch sometimes creates
-        for root, dirs, files in os.walk(args.outdir):
-            for f in files:
-                if f[-5:] == '.orig' or f[-4:] == '.rej':
-                    os.unlink(os.path.join(root, f))
-        git_debug_snapshot(args, "apply backport patch %s" % print_name)
-
-    sempatches.sort()
-    prefix_len = len(os.path.join(source_dir, 'patches')) + 1
-
-    for cocci_file in sempatches:
-        # Until Coccinelle picks this up
-        pycocci = os.path.join(source_dir, 'devel/pycocci')
-        cmd = [pycocci, cocci_file]
-        extra_spatch_args = []
-        if args.profile_cocci:
-            cmd.append('--profile-cocci')
-        cmd.append(os.path.abspath(args.outdir))
-        print_name = cocci_file[prefix_len:]
-        if args.verbose:
-            logwrite("Applying SmPL patch %s" % print_name)
-        sprocess = subprocess.Popen(cmd,
-                                    stdout=subprocess.PIPE, stderr=subprocess.STDOUT,
-                                    close_fds=True, universal_newlines=True,
-                                    cwd=args.outdir)
-        output = sprocess.communicate()[0]
-        sprocess.wait()
-        if sprocess.returncode != 0:
-            logwrite("Failed to process SmPL patch %s" % print_name)
-            return 3
-        output = output.split('\n')
-        if output[-1] == '':
-            output = output[:-1]
-        if args.verbose:
-            for line in output:
-                logwrite('> %s' % line)
-
-        # remove cocci_backup files
-        for root, dirs, files in os.walk(args.outdir):
-            for f in files:
-                if f.endswith('.cocci_backup'):
-                    os.unlink(os.path.join(root, f))
-        git_debug_snapshot(args, "apply backport SmPL patch %s" % print_name)
-
-    if test_cocci:
-        logwrite('Done!')
-        return 0
+    apply_patches(args, "backport", source_dir, 'patches', args.outdir, logwrite)
 
     # some post-processing is required
     configtree = kconfig.ConfigTree(os.path.join(args.outdir, 'Kconfig'))
Signature · 1 line
2.1.1
#2 lore raw

PATCH v2 2/13 backports: ifdef around module_init() module_exit() for modules

In reply to Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

We only need this for modules.

---
 backport/backport-include/linux/module.h | 2 ++
 1 file changed, 2 insertions(+)
backport/backport-include/linux/module.h +2 -0
index 82c96bd..e8f28b1 100644
@@ -25,6 +25,7 @@ extern void backport_dependency_symbol(void);
 		       " using backports " BACKPORTS_VERSION);
 #endif
 
+#ifdef MODULE
 #undef module_init
 #define module_init(initfn)						\
 	static int __init __init_backport(void)				\
@@ -58,6 +59,7 @@ extern void backport_dependency_symbol(void);
 		rcu_barrier();						\
 	}								\
 	void cleanup_module(void) __attribute__((alias("__exit_compat")));
+#endif
 
 #if LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)
 #undef param_check_bool
Signature · 1 line
2.1.1
#3 lore raw

PATCH v2 3/13 backports: allow for different backport prefix

In reply to Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

The way we backport when packaging is to minimize the amount of changes required by taking advantage of the fact that Kconfig will treat can read CONFIG_ an environment variable with getenv() when parsing menu entries. When doing integration we don't want to do this so instead we'll rely on the CONFIG_BACKPORT prefix. This requires a bit of work on our current parsers.

This adds some initial code for integration, this doesn't run yet. Although adjust_backported_configs() runs when packaging right now this just removes some comments out the top level Kconfig, but leaves the code in place should it later want to consider using CONFIG_BACKPORT prefix and the gains of now allowing to build when a respective symbols is already built in.

As a small enhancement add to each backported local symbol a dependency to require the user's kernel to not have built-in the backported symbols when packaging, this allows to get rid of the checks in checks.h, we make this more generic for all drivers and subsystems we backport now.

---
 backport/Kconfig            |  6 ++-
 devel/doc/kconfig-operation |  4 +-
 gentree.py                  | 53 ++++++++++++++++++-------
 lib/kconfig.py              | 94 ++++++++++++++++++++++++++++++++++++++++++++-
 4 files changed, 138 insertions(+), 19 deletions(-)
backport/Kconfig +5 -1
index b14a268..f63f4fd 100644
@@ -14,11 +14,15 @@ config BACKPORTED_KERNEL_NAME
 source Kconfig.kernel
 source Kconfig.versions
 
-# some hacks ...
+# some hacks for when we use backports to generate a package
+# to build modules out of tree.
+#ignore-parser-package
 config WIRELESS
 	def_bool y
+#ignore-parser-package
 config NET_CORE
 	def_bool y
+#ignore-parser-package
 config EXPERT
 	def_bool y
 
devel/doc/kconfig-operation +1 -3
index 0245889..f1ecf60 100644
@@ -63,7 +63,7 @@ being compiled against is older than X.
 
 All together, this allows the correct options to be selected by the user.
 
-There's one more caveat: At backport configuration time, the CONFIG_
+When using Linux backports as a packaged solution the the CONFIG_
 environment variable is set to CPTCFG_ ("compat config", but also chosen
 because it has the same length as CONFIG_). This shows up in the .config
 file and other places, and in fact in all makefiles and in the code. The
@@ -73,8 +73,6 @@ This allows code to, for example, have "#ifdef CONFIG_PM" which can only
 be set or cleared in the kernel, not in the backport configuration. Since
 this is needed, a transformation step is done at backport creation time.
 
-
-
  Backport creation for Kconfig
 -------------------------------
 
gentree.py +39 -14

135 lines not on this page · raw message

lib/kconfig.py +93 -1

108 lines not on this page · raw message

Signature · 1 line
2.1.1
#4 lore raw

Re: [PATCH v2 03/13] backports: allow for different backport prefix

gentree.py def read_dependencies(depfilename): · line 76

Quoted 7 lines · Luis R. Rodriguez
gentree.py +3 -0
@@ -71,6 +71,9 @@ def read_dependencies(depfilename):
                 ret[sym].append(kconfig_exp)
         else:
             sym, dep = item.split()
+            if bp_prefix != 'CPTCFG_':
+                dep_prefix = re.sub(r'^CONFIG_(.*)', r'\1', bp_prefix)
+                sym = dep_prefix + sym

I'm not sure I like the way you're framing this here. For one, you could do the re.sub() outside the loop (minimal performance optimisation).

The more interesting part though is that you're parsing the prefix, I don't think that's a good idea because it breaks making the prefix generic.

IMHO this would be better handled in the code that uses the return value to add things to the Kconfig dependencies, there you could just go
if integrate:
deplist[sym] = ["BACKPORT_" + x for x in new]
else:
deplist[sym] = new

or so.

That would probably belong into another patch though.

gentree.py def process(kerneldir, outdir, copy_list_file, git_revision=None, · line 743

Quoted 6 lines
gentree.py +1 -1
@@ -724,7 +740,7 @@ def process(kerneldir, outdir, copy_list_file, git_revision=None,
             sys.exit(1)
 
     copy_list = read_copy_list(args.copy_list)
-    deplist = read_dependencies(os.path.join(source_dir, 'dependencies'))
+    deplist = read_dependencies(os.path.join(source_dir, 'dependencies'), bp_prefix)

Another way to look at it would be to say that reading a file shouldn't modify the data :-)

gentree.py def process(kerneldir, outdir, copy_list_file, git_revision=None, · line 832

Quoted 4 lines
gentree.py +0 -2
     # rewrite Makefile and source symbols
     regexes = []
-    for some_symbols in [symbols[i:i + 50] for i in range(0, len(symbols), 50)]:
-        r = 'CONFIG_((' + '|'.join([s + '(_MODULE)?' for s in some_symbols]) + ')([^A-Za-z0-9_]|$))'

I'm not even really sure any more what this was meant to do?

gentree.py def process(kerneldir, outdir, copy_list_file, git_revision=None, · line 857

Quoted 3 lines
gentree.py +3 -0
+    all_symbols = orig_symbols + symbols
+    for some_symbols in [all_symbols[i:i + 50] for i in range(0, len(all_symbols), 50)]:
+        r = 'CONFIG_((?!BACKPORT)(' + '|'.join([s + '(_MODULE)?' for s in some_symbols]) + ')([^A-Za-z0-9_]|$))'

But this seems odd, why would you have BACKPORT_ already in some existing Makefile? It doesn't seem like that would ever happen, so it seems you could and should drop this change.

gentree.py def process(kerneldir, outdir, copy_list_file, git_revision=None, · line 866

Quoted 6 lines
gentree.py +1 -1
@@ -838,7 +863,7 @@ def process(kerneldir, outdir, copy_list_file, git_revision=None,
         for f in files:
             data = open(os.path.join(root, f), 'r').read()
             for r in regexes:
-                data = r.sub(r'CPTCFG_\1', data)
+                data = r.sub(r'' + bp_prefix + '\\1', data)

technically, that should be re.escape(bp_prefix)

(btw, it might be clearer if you used %s instead of +'ing the bp_prefix in)

gentree.py def process(kerneldir, outdir, copy_list_file, git_revision=None, · line 912

Quoted 3 lines
gentree.py +1 -1
     for some_symbols in [disable_makefile[i:i + 50] for i in range(0, len(disable_makefile), 50)]:
-        r = '^([^#].*((CPTCFG|CONFIG)_(' + '|'.join([s for s in some_symbols]) + ')))'
+        r = '^([^#].*((CPTCFG|CONFIG_BACKPORT|CONFIG)_(' + '|'.join([s for s in some_symbols]) + ')))'

should just use bp_prefix instead of the various options

Quoted 5 lines
lib/kconfig.py +1 -1
-cfg_line = re.compile(r'^(config|menuconfig)\s+(?P<sym>[^\s]*)')
+cfg_line = re.compile(r'^(?P<opt>config|menuconfig)\s+(?P<sym>[^\s]*)')

sel_line = re.compile(r'^(?P<spc>\s+)select\s+(?P<sym>[^\s]*)\s*$') backport_line = re.compile(r'^\s+#(?P<key>[ch]-file|module-name)\s*(?P<name>.*)')
+ignore_parse_p = re.compile(r'^\s*#(?P<key>ignore-parser-package)')

Since you're later splitting it into separate files, maybe you should just ignore a whole file instead of having to annotate each symbol? That'd be easier to maintain (and easier to parse as well :) )

lib/kconfig.py class ConfigTree(object): · line 62

Quoted 3 lines
lib/kconfig.py +3 -0
+    def _mod_kconfig_line(self, l, orig_symbols, bp_prefix):
+        if bp_prefix != 'CPTCFG_':
+            prefix = re.sub(r'^CONFIG_(.*)', r'\1', bp_prefix)

Another case like above ... maybe you should have bp_prefix and bp_kconf_prefix separately. Actually that seems like a good idea. bp_kconf_prefix is empty for the backport package case, so you could add it in unconditionally, and bp_prefix would be CONFIG_ or CPTCFG_ for the two cases. Yes, I think that would make a lot of sense and allow you to get rid of this regular expression magic while making the code easier to read/understand.

Quoted 1 line

+ def adjust_backported_configs(self, integrate, orig_symbols, bp_prefix):

This is only used for integrated though, no?

johannes

#5 lore raw

Re: [PATCH v2 03/13] backports: allow for different backport prefix

Quoted 12 lines · Johannes Berg

gentree.py def read_dependencies(depfilename): · line 76

Quoted 7 lines · Luis R. Rodriguez
gentree.py +3 -0
@@ -71,6 +71,9 @@ def read_dependencies(depfilename):
                 ret[sym].append(kconfig_exp)
         else:
             sym, dep = item.split()
+            if bp_prefix != 'CPTCFG_':
+                dep_prefix = re.sub(r'^CONFIG_(.*)', r'\1', bp_prefix)
+                sym = dep_prefix + sym

I'm not sure I like the way you're framing this here. For one, you could do the re.sub() outside the loop (minimal performance optimisation).

Indeed.

Quoted 3 lines

The more interesting part though is that you're parsing the prefix, I don't think that's a good idea because it breaks making the prefix generic.

Makes me wonder if we should even bother really making the prefix configurable, once we do this we'll have to support it. The code would be a lot simpler if we only had two prefixes.

Quoted 6 lines

IMHO this would be better handled in the code that uses the return value to add things to the Kconfig dependencies, there you could just go
if integrate:
deplist[sym] = ["BACKPORT_" + x for x in new]
else:
deplist[sym] = new

I like it, thanks.

I will note how you still provided "BACKPORT_" here rather than the prefix, that's why I did the sub thing, but I'm more inclined to remove the dynamic nature of the prefix for integration. Not sure why that'd be a good idea and could only make things harder to support / change in the future as we are learning with CPTCFG_.

Thoughts?

Quoted 1 line

That would probably belong into another patch though.

OK

Quoted 8 lines

gentree.py def process(kerneldir, outdir, copy_list_file, git_revision=None, · line 832

Quoted 4 lines
gentree.py +0 -2
     # rewrite Makefile and source symbols
     regexes = []
-    for some_symbols in [symbols[i:i + 50] for i in range(0, len(symbols), 50)]:
-        r = 'CONFIG_((' + '|'.join([s + '(_MODULE)?' for s in some_symbols]) + ')([^A-Za-z0-9_]|$))'

I'm not even really sure any more what this was meant to do?

From what I can understand this looks iterates over the symbols list 50 at a time,

then for each it uses that 50 batch make a huge fucking or statement or possible configs that might be possible.

Quoted 6 lines

gentree.py def process(kerneldir, outdir, copy_list_file, git_revision=None, · line 857

Quoted 3 lines
gentree.py +3 -0
+    all_symbols = orig_symbols + symbols
+    for some_symbols in [all_symbols[i:i + 50] for i in range(0, len(all_symbols), 50)]:
+        r = 'CONFIG_((?!BACKPORT)(' + '|'.join([s + '(_MODULE)?' for s in some_symbols]) + ')([^A-Za-z0-9_]|$))'

But this seems odd, why would you have BACKPORT_ already in some existing Makefile?

Yeah that I think we can ignore now the other internal stuff was addressed, that was to account for the bpauto and kernel version things.

Quoted 2 lines

It doesn't seem like that would ever happen, so it seems you could and should drop this change.

I think that's true now. Nuked and will test at the end.

Quoted 8 lines

gentree.py def process(kerneldir, outdir, copy_list_file, git_revision=None, · line 866

Quoted 6 lines
gentree.py +1 -1
@@ -838,7 +863,7 @@ def process(kerneldir, outdir, copy_list_file, git_revision=None,
         for f in files:
             data = open(os.path.join(root, f), 'r').read()
             for r in regexes:
-                data = r.sub(r'CPTCFG_\1', data)
+                data = r.sub(r'' + bp_prefix + '\\1', data)

technically, that should be re.escape(bp_prefix)

We want to support bp_prefix having a regexp ? Sorry I didn't get that.

Quoted 2 lines

(btw, it might be clearer if you used %s instead of +'ing the bp_prefix in)

Wasn't quite sure how'd well that'd look with the r'' prefix thing, and still not sure, r.sub(r"%s\\1" % bp_prefix, data) ? If so that looks rather like hell to me.

Quoted 5 lines

gentree.py def process(kerneldir, outdir, copy_list_file, git_revision=None, · line 912

Quoted 3 lines
gentree.py +1 -1
     for some_symbols in [disable_makefile[i:i + 50] for i in range(0, len(disable_makefile), 50)]:
-        r = '^([^#].*((CPTCFG|CONFIG)_(' + '|'.join([s for s in some_symbols]) + ')))'
+        r = '^([^#].*((CPTCFG|CONFIG_BACKPORT|CONFIG)_(' + '|'.join([s for s in some_symbols]) + ')))'

should just use bp_prefix instead of the various options

OK will try that.

Quoted 9 lines
Quoted 5 lines
lib/kconfig.py +1 -1
-cfg_line = re.compile(r'^(config|menuconfig)\s+(?P<sym>[^\s]*)')
+cfg_line = re.compile(r'^(?P<opt>config|menuconfig)\s+(?P<sym>[^\s]*)')

sel_line = re.compile(r'^(?P<spc>\s+)select\s+(?P<sym>[^\s]*)\s*$') backport_line = re.compile(r'^\s+#(?P<key>[ch]-file|module-name)\s*(?P<name>.*)')
+ignore_parse_p = re.compile(r'^\s*#(?P<key>ignore-parser-package)')

Since you're later splitting it into separate files, maybe you should just ignore a whole file instead of having to annotate each symbol? That'd be easier to maintain (and easier to parse as well :) )

Neat yea good idea.

Quoted 8 lines

lib/kconfig.py class ConfigTree(object): · line 62

Quoted 3 lines
lib/kconfig.py +3 -0
+    def _mod_kconfig_line(self, l, orig_symbols, bp_prefix):
+        if bp_prefix != 'CPTCFG_':
+            prefix = re.sub(r'^CONFIG_(.*)', r'\1', bp_prefix)

Another case like above ... maybe you should have bp_prefix and bp_kconf_prefix separately. Actually that seems like a good idea. bp_kconf_prefix is empty for the backport package case, so you could add it in unconditionally, and bp_prefix would be CONFIG_

You mean CONFIG_BACKPORT_ ?

Quoted 4 lines

or CPTCFG_ for the
two cases. Yes, I think that would make a lot of sense and allow you to get rid of this regular expression magic while making the code easier to read/understand.

Once this is clear sure, I do prefer it but only once we evaluate if we really need to make the prefixes configurable.

Quoted 3 lines
Quoted 1 line

+ def adjust_backported_configs(self, integrate, orig_symbols, bp_prefix):

This is only used for integrated though, no?

Right now yes, but I'm hinting that perhaps it should also be used for packaging since it deals with negating a symbol if its built-in on the kernel already. There should be other ways to do this for packaging, the checks.h does it but that's just for two modules, we should be doing this for much other symbols as well.

Luis

#6 lore raw

Re: [PATCH v2 03/13] backports: allow for different backport prefix

Quoted 9 lines · Luis R. Rodriguez
Quoted 6 lines

IMHO this would be better handled in the code that uses the return value to add things to the Kconfig dependencies, there you could just go
if integrate:
deplist[sym] = ["BACKPORT_" + x for x in new]
else:
deplist[sym] = new

I like it, thanks.

Quoted 7 lines

I will note how you still provided "BACKPORT_" here rather than the prefix, that's why I did the sub thing, but I'm more inclined to remove the dynamic nature of the prefix for integration. Not sure why that'd be a good idea and could only make things harder to support / change in the future as we are learning with CPTCFG_.

Thoughts?

I think the splitting of bp_kconf_prefix and bp_prefix I suggested would help. Now that I look at it again, the names don't really make sense though.

Quoted 10 lines
Quoted 8 lines

gentree.py def process(kerneldir, outdir, copy_list_file, git_revision=None, · line 866

Quoted 6 lines
gentree.py +1 -1
@@ -838,7 +863,7 @@ def process(kerneldir, outdir, copy_list_file, git_revision=None,
         for f in files:
             data = open(os.path.join(root, f), 'r').read()
             for r in regexes:
-                data = r.sub(r'CPTCFG_\1', data)
+                data = r.sub(r'' + bp_prefix + '\\1', data)

technically, that should be re.escape(bp_prefix)

We want to support bp_prefix having a regexp ? Sorry I didn't get that.

No, I mean if bp_prefix were to contain some special character like [. This can't actually happen though.

Quoted 6 lines
Quoted 2 lines

(btw, it might be clearer if you used %s instead of +'ing the bp_prefix in)

Wasn't quite sure how'd well that'd look with the r'' prefix thing, and still not sure, r.sub(r"%s\\1" % bp_prefix, data) ? If so that looks rather like hell to me.

Ok sure :) + is fine with me.

Quoted 10 lines
Quoted 8 lines

lib/kconfig.py class ConfigTree(object): · line 62

Quoted 3 lines
lib/kconfig.py +3 -0
+    def _mod_kconfig_line(self, l, orig_symbols, bp_prefix):
+        if bp_prefix != 'CPTCFG_':
+            prefix = re.sub(r'^CONFIG_(.*)', r'\1', bp_prefix)

Another case like above ... maybe you should have bp_prefix and bp_kconf_prefix separately. Actually that seems like a good idea. bp_kconf_prefix is empty for the backport package case, so you could add it in unconditionally, and bp_prefix would be CONFIG_

You mean CONFIG_BACKPORT_ ?

No, I did mean CONFIG_. One prefix for kconfig, and one prefix for "additional renaming".

The names I gave them here were really bad though. Maybe bp_prefix = "CONFIG_"
additional_prefix = "BACKPORT_"

(or bp_prefix = "CPTCFG_" / additional_prefix = "")

or so?

Quoted 7 lines
Quoted 4 lines

or CPTCFG_ for the
two cases. Yes, I think that would make a lot of sense and allow you to get rid of this regular expression magic while making the code easier to read/understand.

Once this is clear sure, I do prefer it but only once we evaluate if we really need to make the prefixes configurable.

Yeah I guess we don't really, but I'd also hate to hardcode BACKPORT_ everywhere?

Quoted 9 lines
Quoted 3 lines
Quoted 1 line

+ def adjust_backported_configs(self, integrate, orig_symbols, bp_prefix):

This is only used for integrated though, no?

Right now yes, but I'm hinting that perhaps it should also be used for packaging since it deals with negating a symbol if its built-in on the kernel already. There should be other ways to do this for packaging, the checks.h does it but that's just for two modules, we should be doing this for much other symbols as well.

Yeah that might be worthwhile.

johannes

#7 lore raw

Re: [PATCH v2 03/13] backports: allow for different backport prefix

Quoted 32 lines · Johannes Berg
Quoted 9 lines · Luis R. Rodriguez
Quoted 6 lines

IMHO this would be better handled in the code that uses the return value to add things to the Kconfig dependencies, there you could just go
if integrate:
deplist[sym] = ["BACKPORT_" + x for x in new]
else:
deplist[sym] = new

I like it, thanks.

Quoted 7 lines

I will note how you still provided "BACKPORT_" here rather than the prefix, that's why I did the sub thing, but I'm more inclined to remove the dynamic nature of the prefix for integration. Not sure why that'd be a good idea and could only make things harder to support / change in the future as we are learning with CPTCFG_.

Thoughts?

I think the splitting of bp_kconf_prefix and bp_prefix I suggested would help. Now that I look at it again, the names don't really make sense though.

Quoted 9 lines
Quoted 8 lines

gentree.py def process(kerneldir, outdir, copy_list_file, git_revision=None, · line 866

Quoted 6 lines
gentree.py +1 -1
@@ -838,7 +863,7 @@ def process(kerneldir, outdir, copy_list_file, git_revision=None,
         for f in files:
             data = open(os.path.join(root, f), 'r').read()
             for r in regexes:
-                data = r.sub(r'CPTCFG_\1', data)
+                data = r.sub(r'' + bp_prefix + '\\1', data)

technically, that should be re.escape(bp_prefix)

Quoted 4 lines
Quoted 1 line

We want to support bp_prefix having a regexp ? Sorry I didn't get that.

No, I mean if bp_prefix were to contain some special character like [. This can't actually happen though.

OK if that can't happen then I don't see the point.

Quoted 8 lines
Quoted 6 lines
Quoted 2 lines

(btw, it might be clearer if you used %s instead of +'ing the bp_prefix in)

Wasn't quite sure how'd well that'd look with the r'' prefix thing, and still not sure, r.sub(r"%s\\1" % bp_prefix, data) ? If so that looks rather like hell to me.

Ok sure :) + is fine with me.

:)

Quoted 14 lines
Quoted 10 lines
Quoted 8 lines

lib/kconfig.py class ConfigTree(object): · line 62

Quoted 3 lines
lib/kconfig.py +3 -0
+    def _mod_kconfig_line(self, l, orig_symbols, bp_prefix):
+        if bp_prefix != 'CPTCFG_':
+            prefix = re.sub(r'^CONFIG_(.*)', r'\1', bp_prefix)

Another case like above ... maybe you should have bp_prefix and bp_kconf_prefix separately. Actually that seems like a good idea. bp_kconf_prefix is empty for the backport package case, so you could add it in unconditionally, and bp_prefix would be CONFIG_

You mean CONFIG_BACKPORT_ ?

No, I did mean CONFIG_. One prefix for kconfig, and one prefix for "additional renaming".

Quoted 7 lines

The names I gave them here were really bad though. Maybe bp_prefix = "CONFIG_"
additional_prefix = "BACKPORT_"

(or bp_prefix = "CPTCFG_" / additional_prefix = "")

or so?

How about:

if integrate:
kconfig_prefix = "CONFIG_"
project_prefix = "BACKPORT_"
else:
kconfig_prefix = "CPTCFG_"
# implied by kconfig_prefix
project_prefix = ""
full_prefix = kconfig_prefix + project_prefix

But note that we special case things all over for when the bp_prefix is 'CPTCFG' and the reason is that it is used when the kconfig getenv trick is used. I suppose we can infer that the kconfig trick is used when kconfig_prefix != 'CONFIG_' though. But the question still stands: why do we want to make these configurable? As it stands I actually hard code things mostly, I can clean this up but would prefer to deal with just the above.

Also note that in some places we use BACKPORT vs BACKPORT_ so a sub or another variable would be needed.

Quoted 10 lines
Quoted 7 lines
Quoted 4 lines

or CPTCFG_ for the
two cases. Yes, I think that would make a lot of sense and allow you to get rid of this regular expression magic while making the code easier to read/understand.

Once this is clear sure, I do prefer it but only once we evaluate if we really need to make the prefixes configurable.

Yeah I guess we don't really, but I'd also hate to hardcode BACKPORT_ everywhere?

As it stands in the v2 series packaging gets no BACKPORT_ prefix as the kconfig getenv() CTPCFG_ trick is used, however for integration we do add the prefix everywhere as we are carrying code into the kernel, we then use this to easily make this symbol depend on the non backported respective symbol making them mutually exclusive. Because of these two things I think a BACKPORT_ prefix for things we carry in is proper. This applies to the BACKPORT_BPAUTO and versioning entries, BACKPORT_KERNEL_3_18 and so on.

I am not sure what other prefix we could possibly use here for integration.

Quoted 11 lines
Quoted 9 lines
Quoted 3 lines
Quoted 1 line

+ def adjust_backported_configs(self, integrate, orig_symbols, bp_prefix):

This is only used for integrated though, no?

Right now yes, but I'm hinting that perhaps it should also be used for packaging since it deals with negating a symbol if its built-in on the kernel already. There should be other ways to do this for packaging, the checks.h does it but that's just for two modules, we should be doing this for much other symbols as well.

Yeah that might be worthwhile.

If CPTCFG was dropped, as I had orignally proposed this would be shared :)

Luis

#8 lore raw

Re: [PATCH v2 03/13] backports: allow for different backport prefix

Quoted 4 lines · Luis R. Rodriguez
Quoted 2 lines

No, I mean if bp_prefix were to contain some special character like [. This can't actually happen though.

OK if that can't happen then I don't see the point.

Where by "can't happen" I mean that Kconfig probably wouldn't be happy about it :-)

Quoted 10 lines

How about:

if integrate:
kconfig_prefix = "CONFIG_"
project_prefix = "BACKPORT_"
else:
kconfig_prefix = "CPTCFG_"
# implied by kconfig_prefix
project_prefix = ""
full_prefix = kconfig_prefix + project_prefix

Yeah, this seems like decent naming.

Quoted 6 lines

But note that we special case things all over for when the bp_prefix is 'CPTCFG' and the reason is that it is used when the kconfig getenv trick is used. I suppose we can infer that the kconfig trick is used when kconfig_prefix != 'CONFIG_' though. But the question still stands: why do we want to make these configurable? As it stands I actually hard code things mostly, I can clean this up but would prefer to deal with just the above.

I'm not sure where that's really the case? The one thing you did was use CPTCFG_ in some places like the version, but that was independent of this and could just be hardcoded there?

Quoted 2 lines

Also note that in some places we use BACKPORT vs BACKPORT_ so a sub or another variable would be needed.

I also didn't see that, why would that ever be needed?

Quoted 8 lines

As it stands in the v2 series packaging gets no BACKPORT_ prefix as the kconfig getenv() CTPCFG_ trick is used, however for integration we do add the prefix everywhere as we are carrying code into the kernel, we then use this to easily make this symbol depend on the non backported respective symbol making them mutually exclusive. Because of these two things I think a BACKPORT_ prefix for things we carry in is proper. This applies to the BACKPORT_BPAUTO and versioning entries, BACKPORT_KERNEL_3_18 and so on.

Sure.

Quoted 1 line

I am not sure what other prefix we could possibly use here for integration.

Well, in theory you could imagine having two people backport different subsystems and trying to integrate them both into a backport kernel ... seems unlikely and will conflict on other levels (e.g. compat.ko) but still.

Anyway, I don't really care if you don't make this configurable, but I don't like the way you're doing string manipulation to figure out what you want :-) That was really the reason for suggesting to split the existing prefix variable into two pieces. You have it today, after all, in theory you could have gotten rid of it completely and just pass the "integrate" flag around.

johannes

#9 lore raw

Re: [PATCH v2 03/13] backports: allow for different backport prefix

Andi, some reference to some of your old module namespace work below for a different use case.

Quoted 9 lines · Johannes Berg
Quoted 4 lines · Luis R. Rodriguez
Quoted 2 lines

No, I mean if bp_prefix were to contain some special character like [. This can't actually happen though.

OK if that can't happen then I don't see the point.

Where by "can't happen" I mean that Kconfig probably wouldn't be happy about it :-)

OK but bp_prefix is also used with a regular print several times and not just for regexp so this would break either way. To be safe I'll add the re.escape(bp_prefix) though.

Quoted 20 lines
Quoted 10 lines

How about:

if integrate:
kconfig_prefix = "CONFIG_"
project_prefix = "BACKPORT_"
else:
kconfig_prefix = "CPTCFG_"
# implied by kconfig_prefix
project_prefix = ""
full_prefix = kconfig_prefix + project_prefix

Yeah, this seems like decent naming.

Quoted 6 lines

But note that we special case things all over for when the bp_prefix is 'CPTCFG' and the reason is that it is used when the kconfig getenv trick is used. I suppose we can infer that the kconfig trick is used when kconfig_prefix != 'CONFIG_' though. But the question still stands: why do we want to make these configurable? As it stands I actually hard code things mostly, I can clean this up but would prefer to deal with just the above.

Quoted 3 lines

I'm not sure where that's really the case? The one thing you did was use CPTCFG_ in some places like the version, but that was independent of this and could just be hardcoded there?

In later code I used CPTCFG_ instead of 'not integrate' but this also carries an implied 'you are using kconfig trick', there were a few cases but surely I can generalize this with the above and as I mentioned inferring the kconfig trick was used if needed (can't think off the top of my head where but do think I needed this). Again though I'd prefer to think more about the *reason* for why we want congigurability of the prefix Vs thinking about solving the problems for it right now. My concerns is once code is baked we'll have to support it. Since people are stupid I expect things to be abused in the most crazy ways possible here and my fear is of some of these use case to come and haunt us. Worse thing I can think of is folks doing double integration with two versions of backports, say backports-3.18, backports-3.19. Obviously this is grotesque and having code in place to allow for this is begging for abuse.

Quoted 4 lines
Quoted 2 lines

Also note that in some places we use BACKPORT vs BACKPORT_ so a sub or another variable would be needed.

I also didn't see that, why would that ever be needed?

lib/kconfig.py uses it to negate the built-in symbol for integration for instance but come to think of it I think we can do this without the 'BACKPORT' and just use 'BACKPORT_' and no sub'ing, will try...

Quoted 9 lines
Quoted 8 lines

As it stands in the v2 series packaging gets no BACKPORT_ prefix as the kconfig getenv() CTPCFG_ trick is used, however for integration we do add the prefix everywhere as we are carrying code into the kernel, we then use this to easily make this symbol depend on the non backported respective symbol making them mutually exclusive. Because of these two things I think a BACKPORT_ prefix for things we carry in is proper. This applies to the BACKPORT_BPAUTO and versioning entries, BACKPORT_KERNEL_3_18 and so on.

Quoted 8 lines

Sure.

Quoted 1 line

I am not sure what other prefix we could possibly use here for integration.

Well, in theory you could imagine having two people backport different subsystems and trying to integrate them both into a backport kernel ... seems unlikely and will conflict on other levels (e.g. compat.ko) but still.

Seems you've though about it too :), indeed sharing compat would be an issue that would need to be addressed if that is to be a desirable option on backports.

You know, this use case seems unavoidable so I'll just proceed with the configurability of it. But note that it seems we're both in agreement that right now what you described requires more work before in any way shape or form folks start using it for the exact purpose you described. I also think Andi Kleen's module namespace might be a much better solution to that problem [0], we'd just have to carry the code ourselves as I am not sure if this is ever going to get upstream as it was originally nacked.

[0] https://backports.wiki.kernel.org/index.php/Documentation/backports/hacking/todo#Module_namespaces

Quoted 6 lines

Anyway, I don't really care if you don't make this configurable, but I don't like the way you're doing string manipulation to figure out what you want :-) That was really the reason for suggesting to split the existing prefix variable into two pieces. You have it today, after all, in theory you could have gotten rid of it completely and just pass the "integrate" flag around.

Yeah point taken. I'll go with the above last proposed variables and try to remove the other use cases.

Luis

#10 lore raw

Re: [PATCH v2 03/13] backports: allow for different backport prefix

Quoted 6 lines

You know, this use case seems unavoidable so I'll just proceed with the configurability of it. But note that it seems we're both in agreement that right now what you described requires more work before in any way shape or form folks start using it for the exact purpose you described. I also think Andi Kleen's module namespace might be a much better solution to that problem [0], we'd just have to carry the code ourselves as I am not

Just to clarify. My name spaces didn't really provide different name spaces (like C++), it just added a ACL to exports to make it possible to do "export only to module N". But the name space itself
was still flat

On the linker side doing real name spaces is probably not too hard, but it would be difficult for linked in code without special linker support.

Quoted 1 line

sure if this is ever going to get upstream as it was originally nacked.

May need to revisit that.

-Andi

#11 lore raw

Re: [PATCH v2 03/13] backports: allow for different backport prefix

Quoted 11 lines · Andi Kleen
Quoted 6 lines

You know, this use case seems unavoidable so I'll just proceed with the configurability of it. But note that it seems we're both in agreement that right now what you described requires more work before in any way shape or form folks start using it for the exact purpose you described. I also think Andi Kleen's module namespace might be a much better solution to that problem [0], we'd just have to carry the code ourselves as I am not

Just to clarify. My name spaces didn't really provide different name spaces (like C++), it just added a ACL to exports to make it possible to do "export only to module N". But the name space itself
was still flat

Indeed that is how I understood it and the use case in mind for backporting different subsystems from different future versions of Linux to an older one might be a use case here (although insane).

Quoted 3 lines

On the linker side doing real name spaces is probably not too hard, but it would be difficult for linked in code without special linker support.

Good to know, perhaps useful for folks who really do consider embarking on this strategy with backports (although I don't recommend it).

Quoted 3 lines
Quoted 1 line

sure if this is ever going to get upstream as it was originally nacked.

May need to revisit that.

The only thing that was not clear to me from reviewing the module namespace stuff a while ago was the original intent, but I confess I actually only looked at the technical details to see if it was applicable to the backports case, do you recall the original motivation ?

Luis

#12 lore raw

Re: [PATCH v2 03/13] backports: allow for different backport prefix

Quoted 5 lines

The only thing that was not clear to me from reviewing the module namespace stuff a while ago was the original intent, but I confess I actually only looked at the technical details to see if it was applicable to the backports case, do you recall the original motivation ?

The original intent was to provide a cleaner export symbol API.

There are roughly two classes of exported symbols:

- Generally usable, well designed, interfaces intended to be used by multiple modules (e.g. functions for drivers to register themselves or library functions)

- Special purpose exports that are only really for a single module, but are not intended as a general interface. These interfaces are usually not really clean and reusable.

The idea was to mark the later special purpose exports with the name of the module that is supposed to them. They wouldn't be available
to everybody else and wouldn't become part of the general kernel module API.

-Andi

#13 lore raw

PATCH v2 4/13 backports: replace BACKPORT_PWD with BACKPORT_DIR

In reply to Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

This will also be used for built-in kernel integration, by using this we can share more code with the built-in kernel approach.

---
 backport/Makefile             | 6 +++---
 backport/Makefile.build       | 4 ++--
 backport/Makefile.real        | 2 +-
 backport/scripts/uninstall.sh | 4 ++--
 4 files changed, 8 insertions(+), 8 deletions(-)
backport/Makefile +3 -3
index ea3982b..fcf2f01 100644
@@ -6,7 +6,7 @@ ifeq ($(KERNELRELEASE),)
 
 MAKEFLAGS += --no-print-directory
 SHELL := /bin/bash
-BACKPORT_PWD := $(shell pwd)
+BACKPORT_DIR := $(shell pwd)
 
 KMODDIR ?= updates
 ifneq ($(origin KLIB), undefined)
@@ -20,7 +20,7 @@ KERNEL_CONFIG := $(KLIB_BUILD)/.config
 KERNEL_MAKEFILE := $(KLIB_BUILD)/Makefile
 CONFIG_MD5 := $(shell md5sum $(KERNEL_CONFIG) 2>/dev/null | sed 's/\s.*//')
 
-export KLIB KLIB_BUILD BACKPORT_PWD KMODDIR KMODPATH_ARG
+export KLIB KLIB_BUILD BACKPORT_DIR KMODDIR KMODPATH_ARG
 
 # disable built-in rules for this file
 .SUFFIXES:
@@ -159,5 +159,5 @@ help: defconfig-help
 	@echo ""
 	@echo "Execute "make" or "make all" to build all targets marked with [*]"
 else
-include $(BACKPORT_PWD)/Makefile.kernel
+include $(BACKPORT_DIR)/Makefile.kernel
 endif
backport/Makefile.build +2 -2
index d209041..a848b37 100644
@@ -3,8 +3,8 @@ export
 
 .PHONY: modules
 modules:
-	@$(MAKE) -C $(KLIB_BUILD) M=$(BACKPORT_PWD) modules
+	@$(MAKE) -C $(KLIB_BUILD) M=$(BACKPORT_DIR) modules
 
 .PHONY: clean
 clean:
-	@$(MAKE) -C $(KLIB_BUILD) M=$(BACKPORT_PWD) clean
+	@$(MAKE) -C $(KLIB_BUILD) M=$(BACKPORT_DIR) clean
backport/Makefile.real +1 -1
index f60d5ca..a0f4916 100644
@@ -89,7 +89,7 @@ modules: backport-include/backport/autoconf.h
 
 .PHONY: install
 install: modules
-	@$(MAKE) -C $(KLIB_BUILD) M=$(BACKPORT_PWD)			\
+	@$(MAKE) -C $(KLIB_BUILD) M=$(BACKPORT_DIR)			\
 		INSTALL_MOD_DIR=$(KMODDIR) $(KMODPATH_ARG)		\
 		modules_install
 	@./scripts/blacklist.sh $(KLIB)/ $(KLIB)/$(KMODDIR)
backport/scripts/uninstall.sh +2 -2
index 1eb42b0..b46d3fe 100755
@@ -10,8 +10,8 @@ else
 	compr=""
 fi
 
-for driver in $(find ${BACKPORT_PWD} -type f -name *.ko); do
-	mod_name=${driver/${BACKPORT_PWD}/${KLIB}${KMODDIR}}${compr}
+for driver in $(find ${BACKPORT_DIR} -type f -name *.ko); do
+	mod_name=${driver/${BACKPORT_DIR}/${KLIB}${KMODDIR}}${compr}
 	echo "  uninstall" $mod_name
 	rm -f $mod_name
 done
Signature · 1 line
2.1.1
#14 lore raw

PATCH v2 5/13 backports: use BACKPORT_DIR prefix on kconfig sources

In reply to Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

This will allow us to do less work for built-in integration support. This requires a bit of self evaluation of the variable within our kconfig library, ideally we'd have support for groking all variables defined within the Kconfig setup but that requires quite a lot more work as it means also parsing Makefiles and inheriting these definitions within config symbols when used. Since we only define one right now and its used for built-in support we deal with it ourselves for now.

Please consider the complexity of adding others, it doesn't seem like there would be much need for others though. If others wanted to use a different BACKPORT_DIR path other than 'backports' that would require tweaking here, but we'll start by assuming no one will want to do that.

---
 backport/Kconfig | 37 ++++++++++++++++++++-----------------
 lib/kconfig.py   | 53 ++++++++++++++++++++++++++++++++++++++++++-----------
 2 files changed, 62 insertions(+), 28 deletions(-)
backport/Kconfig +20 -17
index f63f4fd..c523323 100644
@@ -1,5 +1,8 @@
 mainmenu "Linux Backports from $BACKPORTED_KERNEL_NAME $BACKPORTED_KERNEL_VERSION (with backports $BACKPORTS_VERSION)"
 
+config BACKPORT_DIR
+	string
+	option env="BACKPORT_DIR"
 config BACKPORTS_VERSION
 	string
 	option env="BACKPORTS_VERSION"
@@ -11,8 +14,8 @@ config BACKPORTED_KERNEL_NAME
 	option env="BACKPORTED_KERNEL_NAME"
 
 # these will be generated
-source Kconfig.kernel
-source Kconfig.versions
+source "$BACKPORT_DIR/Kconfig.kernel"
+source "$BACKPORT_DIR/Kconfig.versions"
 
 # some hacks for when we use backports to generate a package
 # to build modules out of tree.
@@ -27,25 +30,25 @@ config EXPERT
 	def_bool y
 
 # this has the configuration for the backport code
-source compat/Kconfig
+source "$BACKPORT_DIR/compat/Kconfig"
 
 # these are copied from the kernel
-source net/wireless/Kconfig
-source net/mac80211/Kconfig
-source net/bluetooth/Kconfig
-source drivers/net/wireless/Kconfig
-source drivers/net/ethernet/Kconfig
-source drivers/net/usb/Kconfig
+source "$BACKPORT_DIR/net/wireless/Kconfig"
+source "$BACKPORT_DIR/net/mac80211/Kconfig"
+source "$BACKPORT_DIR/net/bluetooth/Kconfig"
+source "$BACKPORT_DIR/drivers/net/wireless/Kconfig"
+source "$BACKPORT_DIR/drivers/net/ethernet/Kconfig"
+source "$BACKPORT_DIR/drivers/net/usb/Kconfig"
 
-source drivers/ssb/Kconfig
-source drivers/bcma/Kconfig
+source "$BACKPORT_DIR/drivers/ssb/Kconfig"
+source "$BACKPORT_DIR/drivers/bcma/Kconfig"
 
-source net/nfc/Kconfig
+source "$BACKPORT_DIR/net/nfc/Kconfig"
 
-source drivers/media/Kconfig
+source "$BACKPORT_DIR/drivers/media/Kconfig"
 
-source net/ieee802154/Kconfig
-source net/mac802154/Kconfig
-source drivers/net/ieee802154/Kconfig
+source "$BACKPORT_DIR/net/ieee802154/Kconfig"
+source "$BACKPORT_DIR/net/mac802154/Kconfig"
+source "$BACKPORT_DIR/drivers/net/ieee802154/Kconfig"
 
-source drivers/usb/class/Kconfig
+source "$BACKPORT_DIR/drivers/usb/class/Kconfig"
lib/kconfig.py +42 -11

71 lines not on this page · raw message

Signature · 1 line
2.1.1
#15 lore raw

Re: [PATCH v2 05/13] backports: use BACKPORT_DIR prefix on kconfig sources

Quoted 10 lines · Luis R. Rodriguez
lib/kconfig.py +3 -3
@@ -21,23 +22,53 @@ class ConfigTree(object):
         yield f
         for l in open(os.path.join(self.basedir, f), 'r'):
             m = src_line.match(l)
-            if m and os.path.exists(os.path.join(self.basedir, m.group('src'))):
-                for i in self._walk(m.group('src')):
-                    yield i
+            if m:
+                bm = bk_src_line.match(l)
+                if bm:

lib/kconfig.py class ConfigTree(object): · line 37

Quoted 10 lines
lib/kconfig.py +10 -0
+                    if os.path.exists(os.path.join(self.basedir, bm.group('src'))):
+                        for i in self._walk(os.path.join(self.basedir, bm.group('src'))):
+                            yield i
+                    elif os.path.exists(os.path.join(self.basedir, 'backports/' + bm.group('src'))):
+                        for i in self._walk(os.path.join(self.basedir, 'backports/' + bm.group('src'))):
+                            yield i
+                else:
+                    if os.path.exists(os.path.join(self.basedir, m.group('src'))):
+                        for i in self._walk(m.group('src')):
+                            yield i

Shouldn't this depend on "integrate" rather than on existence?

Ah, this is what you were alluding to in the commit log? The fact that you hardcode "backports/" into this? IMHO it would make more sense to pass in the "base" directory (either "backports/" or "") though, instead of making *that* depend on the existence of the directory as well.

Remember, the existence check here serves to remove includes that cannot be satisfied; your existence check mixes in the differentiation between packaged and integrated, which doesn't seem right.

Regardless of whether you make the "backports/" prefix configurable or not, you should pass it to this library function and use it unconditionally instead of trying to determine package vs. integrated from the existence of directories.

Quoted 7 lines
lib/kconfig.py +0 -3
     def _prune_sources(self, f, ignore):
         for nf in self._walk(f):
             out = ''
             for l in open(os.path.join(self.basedir, nf), 'r'):
-                m = src_line.match(l)
-                if not m:
-                    out += l

lib/kconfig.py class ConfigTree(object): · line 48

Quoted 10 lines
lib/kconfig.py +6 -4
-                    continue
-                src = m.group('src')
-                if src in ignore or os.path.exists(os.path.join(self.basedir, src)):
-                    out += l
+                bm = bk_src_line.match(l)
+                if bm:
+                    bp_src = bm.group('src')
+                    if bp_src in ignore or \
+                       os.path.exists(os.path.join(self.basedir, bp_src)) or \
+                       os.path.exists(os.path.join(self.basedir, 'backports/' + bp_src)):

same here.

johannes

#16 lore raw

Re: [PATCH v2 05/13] backports: use BACKPORT_DIR prefix on kconfig sources

Quoted 30 lines · Johannes Berg
Quoted 10 lines · Luis R. Rodriguez
lib/kconfig.py +3 -3
@@ -21,23 +22,53 @@ class ConfigTree(object):
         yield f
         for l in open(os.path.join(self.basedir, f), 'r'):
             m = src_line.match(l)
-            if m and os.path.exists(os.path.join(self.basedir, m.group('src'))):
-                for i in self._walk(m.group('src')):
-                    yield i
+            if m:
+                bm = bk_src_line.match(l)
+                if bm:

lib/kconfig.py class ConfigTree(object): · line 37

Quoted 10 lines
lib/kconfig.py +10 -0
+                    if os.path.exists(os.path.join(self.basedir, bm.group('src'))):
+                        for i in self._walk(os.path.join(self.basedir, bm.group('src'))):
+                            yield i
+                    elif os.path.exists(os.path.join(self.basedir, 'backports/' + bm.group('src'))):
+                        for i in self._walk(os.path.join(self.basedir, 'backports/' + bm.group('src'))):
+                            yield i
+                else:
+                    if os.path.exists(os.path.join(self.basedir, m.group('src'))):
+                        for i in self._walk(m.group('src')):
+                            yield i

Shouldn't this depend on "integrate" rather than on existence?

Ah, this is what you were alluding to in the commit log? The fact that you hardcode "backports/" into this? IMHO it would make more sense to pass in the "base" directory (either "backports/" or "") though, instead of making *that* depend on the existence of the directory as well.

Quoted 8 lines

Remember, the existence check here serves to remove includes that cannot be satisfied; your existence check mixes in the differentiation between packaged and integrated, which doesn't seem right.

Regardless of whether you make the "backports/" prefix configurable or not, you should pass it to this library function and use it unconditionally instead of trying to determine package vs. integrated from the existence of directories.

Fair enough.

Quoted 18 lines
Quoted 7 lines
lib/kconfig.py +0 -3
     def _prune_sources(self, f, ignore):
         for nf in self._walk(f):
             out = ''
             for l in open(os.path.join(self.basedir, nf), 'r'):
-                m = src_line.match(l)
-                if not m:
-                    out += l

lib/kconfig.py class ConfigTree(object): · line 48

Quoted 10 lines
lib/kconfig.py +6 -4
-                    continue
-                src = m.group('src')
-                if src in ignore or os.path.exists(os.path.join(self.basedir, src)):
-                    out += l
+                bm = bk_src_line.match(l)
+                if bm:
+                    bp_src = bm.group('src')
+                    if bp_src in ignore or \
+                       os.path.exists(os.path.join(self.basedir, bp_src)) or \
+                       os.path.exists(os.path.join(self.basedir, 'backports/' + bp_src)):
Quoted 1 line

same here.

Yeah I get it, good points.

This does mean that bp_prefix topic *can* also be tied down with this other directory prefix as a form of 'builder' for integration. Making the prefix configurable would make sense then only if also making the directory prefix should be configurable.

I think we're better off right now with just supporting two approaches with their own directory prefix, and prefixes for variables.

Luis

#17 lore raw

Re: [PATCH v2 05/13] backports: use BACKPORT_DIR prefix on kconfig sources

Quoted 5 lines · Luis R. Rodriguez

This does mean that bp_prefix topic *can* also be tied down with this other directory prefix as a form of 'builder' for integration. Making the prefix configurable would make sense then only if also making the directory prefix should be configurable.

Indeed.

Quoted 3 lines

I think we're better off right now with just supporting two approaches with their own directory prefix, and prefixes for variables.

Sure, that's fine. I have no issues with either, but I'd like to see the two cases actually combined and separated, in the sense that you don't have magic code that tries both and just succeeds on one, but only have code that tries the right thing.

johannes

#18 lore raw

Re: [PATCH v2 05/13] backports: use BACKPORT_DIR prefix on kconfig sources

Quoted 10 lines · Johannes Berg
Quoted 5 lines · Luis R. Rodriguez

This does mean that bp_prefix topic *can* also be tied down with this other directory prefix as a form of 'builder' for integration. Making the prefix configurable would make sense then only if also making the directory prefix should be configurable.

Indeed.

Quoted 8 lines
Quoted 3 lines

I think we're better off right now with just supporting two approaches with their own directory prefix, and prefixes for variables.

Sure, that's fine. I have no issues with either, but I'd like to see the two cases actually combined and separated, in the sense that you don't have magic code that tries both and just succeeds on one, but only have code that tries the right thing.

Fair enough.

Luis

#19 lore raw

PATCH v2 6/13 backports: update dependencies map file

In reply to Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

During development of kernel integration support using CONFIG_BACKPORT was evaluated as a prefix over CPTCFG even for packaging backports, for some reason this change lifted some restrictions one some device drivers which was present before and as such requires some changes to the dependencies map file to ensure correct compilation for respective kernel versions.

---
 dependencies | 31 +++++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 8 deletions(-)
dependencies +23 -8
index 4964aa6..64903dc 100644
@@ -16,6 +16,8 @@ USB_GSPCA_OV534 3.5
 # we only support on >= 3.4 give that reguatory itself depends
 # on -EPROBE_DEFER.
 SOC_CAMERA 3.4
+VIDEO_S5K5BAF 3.4
+VIDEO_S5K4ECGX 3.4
 # 49920bc6 and 1003cab8 and while it seems there is a
 # one to one map DMA_FROM_DEVICE to DMA_DEV_TO_MEM
 # I can't verify this fully yet.
@@ -29,16 +31,29 @@ DVB_USB_RTL28XXU 3.4
 # missing linux/gpio/consumer.h
 VIDEO_ADV7604 3.13
 # missing function clk_prepare_enable(), clk_disable_unprepare() and devm_regulator_bulk_get()
-VIDEO_MT9P031 3.3
-VIDEO_MT9T001 3.3
 VIDEO_MT9V032 3.3
-VIDEO_NOON010PC30 3.3
-VIDEO_S5K6A3 3.3
 VIDEO_S5K6AA 3.3
-VIDEO_S5K5BAF 3.3
-VIDEO_S5K4ECGX 3.3
-VIDEO_M5MOLS 3.3
-VIDEO_S5C73M3 3.3
+
+# missing devm_regulator_bulk_get
+VIDEO_MT9T001 3.5
+VIDEO_NOON010PC30 3.5
+VIDEO_MT9P031 3.5
+
+# missing of_property_read_bool() added via fa4d34cc on v3.4-rc1~71, backport
+# that attomically and you can enable this for older kernels.
+VIDEO_ADV7343 3.4
+
+# for whoever wants to backport this: GPIOF_EXPORT was redefined via commit
+# 79a9becd on v3.13-rc1~120^2~15, before this it was redefined via commit
+# f567fde2 on v3.5-rc7~32^2~4 and finally added via commit fc3a1f04 on
+# v3.5-rc1~93^2~25. We don't address any of these changes yet so we require
+# the latest interpretation.
+VIDEO_S5K6AA 3.13
+VIDEO_S5K6A3 3.13
+
+# missing linux/sizes.h
+VIDEO_M5MOLS 3.6
+VIDEO_S5C73M3 3.6
 
 # missing function devm_regmap_init_i2c()
 VIDEO_LM3646 3.3
Signature · 1 line
2.1.1
#20 lore raw

Re: [PATCH v2 06/13] backports: update dependencies map file

Quoted 8 lines · Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

During development of kernel integration support using CONFIG_BACKPORT was evaluated as a prefix over CPTCFG even for packaging backports, for some reason this change lifted some restrictions one some device drivers which was present before and as such requires some changes to the dependencies map file to ensure correct compilation for respective kernel versions.

This is confusing ... I think what you're trying to say is that you noticed it because your integration system was broken and not honouring restrictions properly?

johannes

#21 lore raw

Re: [PATCH v2 06/13] backports: update dependencies map file

Quoted 10 lines · Johannes Berg
Quoted 8 lines · Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

During development of kernel integration support using CONFIG_BACKPORT was evaluated as a prefix over CPTCFG even for packaging backports, for some reason this change lifted some restrictions one some device drivers which was present before and as such requires some changes to the dependencies map file to ensure correct compilation for respective kernel versions.

Quoted 3 lines

This is confusing ... I think what you're trying to say is that you noticed it because your integration system was broken and not honouring restrictions properly?

No I verified each reported case I got and verified the issues found were valid. For some reason some of these drivers were not allowed to compile on some older versions, and from what me and Hauke could tell they should, but they weren't. So the new annotations on requirements are valid.

Luis

#22 lore raw

Re: [PATCH v2 06/13] backports: update dependencies map file

Quoted 15 lines · Luis R. Rodriguez
Quoted 10 lines · Johannes Berg
Quoted 8 lines · Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

During development of kernel integration support using CONFIG_BACKPORT was evaluated as a prefix over CPTCFG even for packaging backports, for some reason this change lifted some restrictions one some device drivers which was present before and as such requires some changes to the dependencies map file to ensure correct compilation for respective kernel versions.

Quoted 3 lines

This is confusing ... I think what you're trying to say is that you noticed it because your integration system was broken and not honouring restrictions properly?

Quoted 5 lines

No I verified each reported case I got and verified the issues found were valid. For some reason some of these drivers were not allowed to compile on some older versions, and from what me and Hauke could tell they should, but they weren't. So the new annotations on requirements are valid.

Right, ok, it's just a roundabout way of describing that you audited the dependencies and found some unnecessary ones :-)

johannes

#23 lore raw

Re: [PATCH v2 06/13] backports: update dependencies map file

Quoted 16 lines · Johannes Berg
Quoted 15 lines · Luis R. Rodriguez
Quoted 13 lines · Johannes Berg
Quoted 8 lines · Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

During development of kernel integration support using CONFIG_BACKPORT was evaluated as a prefix over CPTCFG even for packaging backports, for some reason this change lifted some restrictions one some device drivers which was present before and as such requires some changes to the dependencies map file to ensure correct compilation for respective kernel versions.

This is confusing ... I think what you're trying to say is that you noticed it because your integration system was broken and not honouring restrictions properly?

Quoted 8 lines
Quoted 5 lines

No I verified each reported case I got and verified the issues found were valid. For some reason some of these drivers were not allowed to compile on some older versions, and from what me and Hauke could tell they should, but they weren't. So the new annotations on requirements are valid.

Right, ok, it's just a roundabout way of describing that you audited the dependencies and found some unnecessary ones :-)

But I didn't do anything other than use a new prefix, and its not clear to me why this happened, the only thing that comes to mind is perhaps the use of the orig_symbols thing.

Luis

#24 lore raw

PATCH v2 7/13 backports: split Kconfig into Kconfig.package and Kconfig.sources

In reply to Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

This splits up the Kconfig from things which are needed due to our copy of code from the kernel and things which we need specifically only for packaging backports. We will later then share the Kconfig.souce for instance for kernel integration.

While at it, split up the list of files that we need to copy into what we know could be shared for integration. The the case of backport packaging Kconfig.package will be copied to the package's Kconfig when building the package with gentree.py.

---
 backport/Kconfig         | 54 ------------------------------------------------
 backport/Kconfig.package | 32 ++++++++++++++++++++++++++++
 backport/Kconfig.sources | 23 +++++++++++++++++++++
 gentree.py               | 22 +++++++++++++++++---
 4 files changed, 74 insertions(+), 57 deletions(-)
 delete mode 100644 backport/Kconfig
 create mode 100644 backport/Kconfig.package
 create mode 100644 backport/Kconfig.sources
backport/Kconfig deleted +0 -54
deleted file mode 100644
index c523323..0000000
@@ -1,54 +0,0 @@
-mainmenu "Linux Backports from $BACKPORTED_KERNEL_NAME $BACKPORTED_KERNEL_VERSION (with backports $BACKPORTS_VERSION)"
-
-config BACKPORT_DIR
-	string
-	option env="BACKPORT_DIR"
-config BACKPORTS_VERSION
-	string
-	option env="BACKPORTS_VERSION"
-config BACKPORTED_KERNEL_VERSION
-	string
-	option env="BACKPORTED_KERNEL_VERSION"
-config BACKPORTED_KERNEL_NAME
-	string
-	option env="BACKPORTED_KERNEL_NAME"
-
-# these will be generated
-source "$BACKPORT_DIR/Kconfig.kernel"
-source "$BACKPORT_DIR/Kconfig.versions"
-
-# some hacks for when we use backports to generate a package
-# to build modules out of tree.
-#ignore-parser-package
-config WIRELESS
-	def_bool y
-#ignore-parser-package
-config NET_CORE
-	def_bool y
-#ignore-parser-package
-config EXPERT
-	def_bool y
-
-# this has the configuration for the backport code
-source "$BACKPORT_DIR/compat/Kconfig"
-
-# these are copied from the kernel
-source "$BACKPORT_DIR/net/wireless/Kconfig"
-source "$BACKPORT_DIR/net/mac80211/Kconfig"
-source "$BACKPORT_DIR/net/bluetooth/Kconfig"
-source "$BACKPORT_DIR/drivers/net/wireless/Kconfig"
-source "$BACKPORT_DIR/drivers/net/ethernet/Kconfig"
-source "$BACKPORT_DIR/drivers/net/usb/Kconfig"
-
-source "$BACKPORT_DIR/drivers/ssb/Kconfig"
-source "$BACKPORT_DIR/drivers/bcma/Kconfig"
-
-source "$BACKPORT_DIR/net/nfc/Kconfig"
-
-source "$BACKPORT_DIR/drivers/media/Kconfig"
-
-source "$BACKPORT_DIR/net/ieee802154/Kconfig"
-source "$BACKPORT_DIR/net/mac802154/Kconfig"
-source "$BACKPORT_DIR/drivers/net/ieee802154/Kconfig"
-
-source "$BACKPORT_DIR/drivers/usb/class/Kconfig"
backport/Kconfig.package new file +32 -0
new file mode 100644
index 0000000..c507de4
@@ -0,0 +1,32 @@
+mainmenu "Backports from $BACKPORTED_KERNEL_NAME $BACKPORTED_KERNEL_VERSION (backports $BACKPORTS_VERSION)"
+
+config BACKPORT_DIR
+	string
+	option env="BACKPORT_DIR"
+config BACKPORTS_VERSION
+	string
+	option env="BACKPORTS_VERSION"
+config BACKPORTED_KERNEL_VERSION
+	string
+	option env="BACKPORTED_KERNEL_VERSION"
+config BACKPORTED_KERNEL_NAME
+	string
+	option env="BACKPORTED_KERNEL_NAME"
+
+# some hacks for when we use backports to generate a package
+# to build modules out of tree.
+#ignore-parser-package
+config WIRELESS
+	def_bool y
+#ignore-parser-package
+config NET_CORE
+	def_bool y
+#ignore-parser-package
+config EXPERT
+	def_bool y
+
+source "$BACKPORT_DIR/Kconfig.sources"
+
+# these will be generated
+source "$BACKPORT_DIR/Kconfig.kernel"
+source "$BACKPORT_DIR/Kconfig.versions"
backport/Kconfig.sources new file +23 -0
new file mode 100644
index 0000000..cdf993c
@@ -0,0 +1,23 @@
+# this has the configuration for the backport code
+source "$BACKPORT_DIR/compat/Kconfig"
+
+# these are copied from the kernel
+source "$BACKPORT_DIR/net/wireless/Kconfig"
+source "$BACKPORT_DIR/net/mac80211/Kconfig"
+source "$BACKPORT_DIR/net/bluetooth/Kconfig"
+source "$BACKPORT_DIR/drivers/net/wireless/Kconfig"
+source "$BACKPORT_DIR/drivers/net/ethernet/Kconfig"
+source "$BACKPORT_DIR/drivers/net/usb/Kconfig"
+
+source "$BACKPORT_DIR/drivers/ssb/Kconfig"
+source "$BACKPORT_DIR/drivers/bcma/Kconfig"
+
+source "$BACKPORT_DIR/net/nfc/Kconfig"
+
+source "$BACKPORT_DIR/drivers/media/Kconfig"
+
+source "$BACKPORT_DIR/net/ieee802154/Kconfig"
+source "$BACKPORT_DIR/net/mac802154/Kconfig"
+source "$BACKPORT_DIR/drivers/net/ieee802154/Kconfig"
+
+source "$BACKPORT_DIR/drivers/usb/class/Kconfig"
gentree.py +19 -3
index 3d4a8b4..860bb71 100755
@@ -746,11 +746,27 @@ def process(kerneldir, outdir, copy_list_file, git_revision=None,
     check_output_dir(args.outdir, args.clean)
 
     # do the copy
+    backport_package_files = [(x, x) for x in [
+        'Makefile',
+        'kconf/',
+        'Makefile.real',
+        'Makefile.kernel',
+        'scripts/',
+        '.blacklist.map',
+        '.gitignore',
+        'Makefile.build'] ]
+    backport_package_files += [
+            ('Kconfig.package', 'Kconfig'),
+            ]
     backport_files = [(x, x) for x in [
-        'Kconfig', 'Makefile', 'Makefile.build', 'Makefile.kernel', '.gitignore',
-        'Makefile.real', 'compat/', 'backport-include/', 'kconf/',
-        'scripts/', '.blacklist.map',
+        'Kconfig.sources',
+        'compat/',
+        'backport-include/',
     ]]
+
+    if not integrate:
+        backport_files += backport_package_files
+
     if not args.git_revision:
         logwrite('Copy original source files ...')
     else:
Signature · 1 line
2.1.1
#25 lore raw

Re: [PATCH v2 07/13] backports: split Kconfig into Kconfig.package and Kconfig.sources

Quoted 10 lines · Luis R. Rodriguez

+++ b/backport/Kconfig.package

backport/Kconfig.package new file +8 -0
@@ -0,0 +1,32 @@
+mainmenu "Backports from $BACKPORTED_KERNEL_NAME $BACKPORTED_KERNEL_VERSION (backports $BACKPORTS_VERSION)"
+
+config BACKPORT_DIR
+	string
+	option env="BACKPORT_DIR"
+config BACKPORTS_VERSION
+	string
+	option env="BACKPORTS_VERSION"

backport/Kconfig.package line 18

Quoted 10 lines
backport/Kconfig.package new file +10 -0
+config BACKPORTED_KERNEL_VERSION
+	string
+	option env="BACKPORTED_KERNEL_VERSION"
+config BACKPORTED_KERNEL_NAME
+	string
+	option env="BACKPORTED_KERNEL_NAME"
+
+# some hacks for when we use backports to generate a package
+# to build modules out of tree.
+#ignore-parser-package

Here you're splitting it, and I think you should just add something to this file to ignore it instead of the "#ignore-parser-package" thing.

johannes

#26 lore raw

Re: [PATCH v2 07/13] backports: split Kconfig into Kconfig.package and Kconfig.sources

Quoted 17 lines · Johannes Berg
Quoted 15 lines · Luis R. Rodriguez

+++ b/backport/Kconfig.package

backport/Kconfig.package new file +13 -0
@@ -0,0 +1,32 @@
+mainmenu "Backports from $BACKPORTED_KERNEL_NAME $BACKPORTED_KERNEL_VERSION (backports $BACKPORTS_VERSION)"
+
+config BACKPORT_DIR
+	string
+	option env="BACKPORT_DIR"
+config BACKPORTS_VERSION
+	string
+	option env="BACKPORTS_VERSION"
+config BACKPORTED_KERNEL_VERSION
+	string
+	option env="BACKPORTED_KERNEL_VERSION"
+config BACKPORTED_KERNEL_NAME
+	string
Quoted 8 lines

backport/Kconfig.package line 18

Quoted 5 lines
backport/Kconfig.package new file +5 -0
+	option env="BACKPORTED_KERNEL_NAME"
+
+# some hacks for when we use backports to generate a package
+# to build modules out of tree.
+#ignore-parser-package

Here you're splitting it, and I think you should just add something to this file to ignore it instead of the "#ignore-parser-package" thing.

Agreed, done.

Luis

#27 lore raw

PATCH v2 8/13 backports: move version file generation to run earlier

In reply to Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

The version file contains:

* BACKPORTS_VERSION
* BACKPORTED_KERNEL_VERSION
* BACKPORTED_KERNEL_NAME

This file is used by the Makefile to export variable definitions used to identify the backport. For kernel integration we'll be using a generated Kconfig file instead and since these are needed when processing kconfig logic this will need to be defined earlier.

Just move the generation of the version file for packaging up early to match where we will generate the Kconfig with the backports versioning identification.

This change has no real functional change other than the move of some code running earlier.

---
 gentree.py | 50 ++++++++++++++++++++++++++------------------------
 1 file changed, 26 insertions(+), 24 deletions(-)
gentree.py +26 -24
index 860bb71..1b6dc89 100755
@@ -789,6 +789,25 @@ def process(kerneldir, outdir, copy_list_file, git_revision=None,
 
     git_debug_snapshot(args, 'Add driver sources')
 
+    if git_tracked_version:
+        backports_version = "(see git)"
+        kernel_version = "(see git)"
+    else:
+        backports_version = git.describe(tree=source_dir, extra_args=['--long'])
+        kernel_version = git.describe(rev=args.git_revision or 'HEAD',
+                                      tree=args.kerneldir,
+                                      extra_args=['--long'])
+
+    if not integrate:
+        f = open(os.path.join(args.outdir, 'versions'), 'w')
+        f.write('BACKPORTS_VERSION="%s"\n' % backports_version)
+        f.write('BACKPORTED_KERNEL_VERSION="%s"\n' % kernel_version)
+        f.write('BACKPORTED_KERNEL_NAME="%s"\n' % args.base_name)
+        if git_tracked_version:
+            f.write('BACKPORTS_GIT_TRACKED="backport tracker ID: $(shell git rev-parse HEAD 2>/dev/null || echo \'not built in git tree\')"\n')
+        f.close()
+        git_debug_snapshot(args, "generate kernel version info file: version")
+
     disable_list = add_automatic_backports(args, bp_prefix)
     if disable_list:
         bpcfg = kconfig.ConfigTree(os.path.join(args.outdir, 'compat', 'Kconfig'))
@@ -815,32 +834,15 @@ def process(kerneldir, outdir, copy_list_file, git_revision=None,
     configtree.modify_selects()
     git_debug_snapshot(args, "convert select to depends on")
 
-    # write the versioning file
-    if git_tracked_version:
-        backports_version = "(see git)"
-        kernel_version = "(see git)"
-    else:
-        backports_version = git.describe(tree=source_dir, extra_args=['--long'])
-        kernel_version = git.describe(rev=args.git_revision or 'HEAD',
-                                      tree=args.kerneldir,
-                                      extra_args=['--long'])
-    f = open(os.path.join(args.outdir, 'versions'), 'w')
-    f.write('BACKPORTS_VERSION="%s"\n' % backports_version)
-    f.write('BACKPORTED_KERNEL_VERSION="%s"\n' % kernel_version)
-    f.write('BACKPORTED_KERNEL_NAME="%s"\n' % args.base_name)
-    if git_tracked_version:
-        f.write('BACKPORTS_GIT_TRACKED="backport tracker ID: $(shell git rev-parse HEAD 2>/dev/null || echo \'not built in git tree\')"\n')
-    f.close()
-
     symbols = configtree.symbols()
 
-    # write local symbol list -- needed during build
-    f = open(os.path.join(args.outdir, '.local-symbols'), 'w')
-    for sym in symbols:
-        f.write('%s=\n' % sym)
-    f.close()
-
-    git_debug_snapshot(args, "add versions/symbols files")
+    if not integrate:
+        # write local symbol list -- needed during build
+        f = open(os.path.join(args.outdir, '.local-symbols'), 'w')
+        for sym in symbols:
+            f.write('%s=\n' % sym)
+        f.close()
+        git_debug_snapshot(args, "add symbols files")
 
     # add defconfigs that we want
     defconfigs_dir = os.path.join(source_dir, 'backport', 'defconfigs')
Signature · 1 line
2.1.1
#28 lore raw

PATCH v2 9/13 backports: define C code backport version info using CPTCFG_

In reply to Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

In order to help unify the naming scheme for shared backports versioning information rely on the CPTCFG_ prefix, when integration support gets added that will translate to the respective CONFIG_BACKPORT_ prefix. Kconfig opt env entries don't get propagated out, so we need to define these ourselves. This leaves all other names in place for packaging and just focuses on sharing on the C / header code.

---
 backport/Makefile.kernel                 |  6 +++---
 backport/backport-include/linux/module.h |  6 +++---
 backport/compat/main.c                   | 32 ++++++++++++++++----------------
 3 files changed, 22 insertions(+), 22 deletions(-)
backport/Makefile.kernel +3 -3
index dcb2ba7..a63184b 100644
@@ -10,9 +10,9 @@ NOSTDINC_FLAGS := \
 	-I$(M)/include/uapi \
 	-include $(M)/backport-include/backport/backport.h \
 	$(call backport-cc-disable-warning, unused-but-set-variable) \
-	-DBACKPORTS_VERSION=\"$(BACKPORTS_VERSION)\" \
-	-DBACKPORTED_KERNEL_VERSION=\"$(BACKPORTED_KERNEL_VERSION)\" \
-	-DBACKPORTED_KERNEL_NAME=\"$(BACKPORTED_KERNEL_NAME)\" \
+	-DCPTCFG_VERSION=\"$(BACKPORTS_VERSION)\" \
+	-DCPTCFG_KERNEL_VERSION=\"$(BACKPORTED_KERNEL_VERSION)\" \
+	-DCPTCFG_KERNEL_NAME=\"$(BACKPORTED_KERNEL_NAME)\" \
 	$(BACKPORTS_GIT_TRACKER_DEF) \
 	$(CFLAGS)
 
backport/backport-include/linux/module.h +3 -3
index e8f28b1..8870abb 100644
@@ -20,9 +20,9 @@ extern void backport_dependency_symbol(void);
 #define BACKPORT_MOD_VERSIONS MODULE_VERSION(BACKPORTS_GIT_TRACKED);
 #else
 #define BACKPORT_MOD_VERSIONS						\
-	MODULE_VERSION("backported from " BACKPORTED_KERNEL_NAME	\
-		       " (" BACKPORTED_KERNEL_VERSION ")"		\
-		       " using backports " BACKPORTS_VERSION);
+	MODULE_VERSION("backported from " CPTCFG_KERNEL_NAME	\
+		       " (" CPTCFG_KERNEL_VERSION ")"		\
+		       " using backports " CPTCFG_VERSION);
 #endif
 
 #ifdef MODULE
backport/compat/main.c +16 -16
index d3f8944..04ebbfd 100644
@@ -8,40 +8,40 @@ MODULE_AUTHOR("Luis R. Rodriguez");
 MODULE_DESCRIPTION("Kernel backport module");
 MODULE_LICENSE("GPL");
 
-#ifndef BACKPORTED_KERNEL_NAME
-#error "You need a BACKPORTED_KERNEL_NAME"
+#ifndef CPTCFG_KERNEL_NAME
+#error "You need a CPTCFG_KERNEL_NAME"
 #endif
 
-#ifndef BACKPORTED_KERNEL_VERSION
-#error "You need a BACKPORTED_KERNEL_VERSION"
+#ifndef CPTCFG_KERNEL_VERSION
+#error "You need a CPTCFG_KERNEL_VERSION"
 #endif
 
-#ifndef BACKPORTS_VERSION
-#error "You need a BACKPORTS_VERSION"
+#ifndef CPTCFG_VERSION
+#error "You need a CPTCFG_VERSION"
 #endif
 
-static char *backported_kernel_name = BACKPORTED_KERNEL_NAME;
+static char *backported_kernel_name = CPTCFG_KERNEL_NAME;
 
 module_param(backported_kernel_name, charp, 0400);
 MODULE_PARM_DESC(backported_kernel_name,
-		 "The kernel tree name that was used for this backport (" BACKPORTED_KERNEL_NAME ")");
+		 "The kernel tree name that was used for this backport (" CPTCFG_KERNEL_NAME ")");
 
-#ifdef BACKPORTS_GIT_TRACKED 
+#ifdef BACKPORTS_GIT_TRACKED
 static char *backports_tracker_id = BACKPORTS_GIT_TRACKED;
 module_param(backports_tracker_id, charp, 0400);
 MODULE_PARM_DESC(backports_tracker_id,
 		 "The version of the tree containing this backport (" BACKPORTS_GIT_TRACKED ")");
 #else
-static char *backported_kernel_version = BACKPORTED_KERNEL_VERSION;
-static char *backports_version = BACKPORTS_VERSION;
+static char *backported_kernel_version = CPTCFG_KERNEL_VERSION;
+static char *backports_version = CPTCFG_VERSION;
 
 module_param(backported_kernel_version, charp, 0400);
 MODULE_PARM_DESC(backported_kernel_version,
-		 "The kernel version that was used for this backport (" BACKPORTED_KERNEL_VERSION ")");
+		 "The kernel version that was used for this backport (" CPTCFG_KERNEL_VERSION ")");
 
 module_param(backports_version, charp, 0400);
 MODULE_PARM_DESC(backports_version,
-		 "The git version of the backports tree used to generate this backport (" BACKPORTS_VERSION ")");
+		 "The git version of the backports tree used to generate this backport (" CPTCFG_VERSION ")");
 
 #endif
 
@@ -63,15 +63,15 @@ static int __init backport_init(void)
 		return ret;
 	}
 
-	printk(KERN_INFO "Loading modules backported from " BACKPORTED_KERNEL_NAME
+	printk(KERN_INFO "Loading modules backported from " CPTCFG_KERNEL_NAME
 #ifndef BACKPORTS_GIT_TRACKED
-		" version " BACKPORTED_KERNEL_VERSION
+		" version " CPTCFG_KERNEL_VERSION
 #endif
 		"\n");
 #ifdef BACKPORTS_GIT_TRACKED
 	printk(KERN_INFO BACKPORTS_GIT_TRACKED "\n");
 #else
-	printk(KERN_INFO "Backport generated by backports.git " BACKPORTS_VERSION "\n");
+	printk(KERN_INFO "Backport generated by backports.git " CPTCFG_VERSION "\n");
 #endif
 
         return 0;
Signature · 1 line
2.1.1
#29 lore raw

Re: [PATCH v2 09/13] backports: define C code backport version info using CPTCFG_

Quoted 10 lines · Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

In order to help unify the naming scheme for shared backports versioning information rely on the CPTCFG_ prefix, when integration support gets added that will translate to the respective CONFIG_BACKPORT_ prefix. Kconfig opt env entries don't get propagated out, so we need to define these ourselves. This leaves all other names in place for packaging and just focuses on sharing on the C / header code.

What difference does this make? It'll break some scripting that we have for sure (assuming the BACKPORTED_ prefix), so naturally I'd like to see why it is necessary.

johannes

#30 lore raw

Re: [PATCH v2 09/13] backports: define C code backport version info using CPTCFG_

Quoted 12 lines · Johannes Berg
Quoted 10 lines · Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

In order to help unify the naming scheme for shared backports versioning information rely on the CPTCFG_ prefix, when integration support gets added that will translate to the respective CONFIG_BACKPORT_ prefix. Kconfig opt env entries don't get propagated out, so we need to define these ourselves. This leaves all other names in place for packaging and just focuses on sharing on the C / header code.

Quoted 3 lines

What difference does this make? It'll break some scripting that we have for sure (assuming the BACKPORTED_ prefix), so naturally I'd like to see why it is necessary.

Sure, let me explain. So if we don't unify we will have to end up with defines for some packaging version scheme to another. The approach I took here was to minimize impact on on userspace side generation side of things and only affect the target C code by modifying the Makefile to define variables we can share. That's pretty much it. I ended up defining things with CPTCFG_ as that will get morphed to the other bp_prefix later for us when integrating. That lets us share it.

Addressing this on scripts that do rely on touching C / H files should just be a matter of doing a direct translation to 3 variables.

Luis

#31 lore raw

Re: [PATCH v2 09/13] backports: define C code backport version info using CPTCFG_

Quoted 12 lines · Luis R. Rodriguez
Quoted 3 lines

What difference does this make? It'll break some scripting that we have for sure (assuming the BACKPORTED_ prefix), so naturally I'd like to see why it is necessary.

Sure, let me explain. So if we don't unify we will have to end up with defines for some packaging version scheme to another. The approach I took here was to minimize impact on on userspace side generation side of things and only affect the target C code by modifying the Makefile to define variables we can share. That's pretty much it. I ended up defining things with CPTCFG_ as that will get morphed to the other bp_prefix later for us when integrating. That lets us share it.

Quoted 2 lines

Addressing this on scripts that do rely on touching C / H files should just be a matter of doing a direct translation to 3 variables.

In this particular case I'm not really sure I see why it needs to be morphed at all?

Anyway, I realized that the whole thing doesn't matter as much to me as I thought it does, we just have to adjust the one place that changes our versions file.

johannes

#32 lore raw

Re: [PATCH v2 09/13] backports: define C code backport version info using CPTCFG_

Quoted 17 lines · Johannes Berg
Quoted 12 lines · Luis R. Rodriguez
Quoted 3 lines

What difference does this make? It'll break some scripting that we have for sure (assuming the BACKPORTED_ prefix), so naturally I'd like to see why it is necessary.

Sure, let me explain. So if we don't unify we will have to end up with defines for some packaging version scheme to another. The approach I took here was to minimize impact on on userspace side generation side of things and only affect the target C code by modifying the Makefile to define variables we can share. That's pretty much it. I ended up defining things with CPTCFG_ as that will get morphed to the other bp_prefix later for us when integrating. That lets us share it.

Quoted 2 lines

Addressing this on scripts that do rely on touching C / H files should just be a matter of doing a direct translation to 3 variables.

Quoted 6 lines

In this particular case I'm not really sure I see why it needs to be morphed at all?

Anyway, I realized that the whole thing doesn't matter as much to me as I thought it does, we just have to adjust the one place that changes our versions file.

If you don't mind the collateral I hope you'd trust me that the alternative is ugglier. I will note now, since we'll prbably forget later, that this will also require quite a bit of thought when and if multiple integrations will be supported. For now sharing the versioning info for packaging and integration is at least making the code generic between the two.

Luis

#33 lore raw

PATCH v2 10/13 backports: add backport version parsing for kernel integration

In reply to Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

The way we'll define backports versioning information for kernel integration is slightly different, we'll rely completely on Kconfig for the job, but in the end share the same C code defines.

---
 gentree.py | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
gentree.py +18 -0
index 1b6dc89..55abe6d 100755
@@ -807,6 +807,24 @@ def process(kerneldir, outdir, copy_list_file, git_revision=None,
             f.write('BACKPORTS_GIT_TRACKED="backport tracker ID: $(shell git rev-parse HEAD 2>/dev/null || echo \'not built in git tree\')"\n')
         f.close()
         git_debug_snapshot(args, "generate kernel version info file: version")
+    else:
+        kconf_regexes = [
+                (re.compile(r'.*(?P<key>%%BACKPORT_DIR%%)'), '%%BACKPORT_DIR%%', 'backports/'),
+                (re.compile(r'.*(?P<key>%%BACKPORTS_VERSION%%).*'), '%%BACKPORTS_VERSION%%', backports_version),
+                (re.compile(r'.*(?P<key>%%BACKPORTED_KERNEL_VERSION%%).*'), '%%BACKPORTED_KERNEL_VERSION%%', kernel_version),
+                (re.compile(r'.*(?P<key>%%BACKPORTED_KERNEL_NAME%%).*'), '%%BACKPORTED_KERNEL_NAME%%', args.base_name),
+        ]
+        out = ''
+        for l in open(os.path.join(args.outdir, 'Kconfig'), 'r'):
+            for r in kconf_regexes:
+                m = r[0].match(l)
+                if m:
+                    l = re.sub(r'(' + r[1] + ')', r'' + r[2] + '', l)
+            out += l
+        outf = open(os.path.join(args.outdir, 'Kconfig'), 'w')
+        outf.write(out)
+        outf.close()
+        git_debug_snapshot(args, "modify top level backports/Kconfig with backports identity")
 
     disable_list = add_automatic_backports(args, bp_prefix)
     if disable_list:
Signature · 1 line
2.1.1
#34 lore raw

PATCH v2 11/13 backports: prefix c-file / h-file auto backport with BPAUTO

In reply to Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

Things we backport are now prefixed with BACKPORT_, when we copy over libraries with the c-files / h-files trick on the compat/Kconfig trick we prefix these with BACKPORT_ already so in order to help distinguish them use BACKPORT_BPAUTO_ for them and prevent a double BACKPORT_ prefix.

---
 backport/backport-include/asm/dma-mapping.h        |  4 +-
 backport/backport-include/backport/leds-disabled.h |  2 +-
 backport/compat/Kconfig                            | 74 +++++++++++-----------
 backport/compat/Makefile                           |  4 +-
 backport/compat/backports.h                        |  4 +-
 gentree.py                                         |  2 +-
 patches/backport-adjustments/devcoredump.patch     |  4 +-
 7 files changed, 47 insertions(+), 47 deletions(-)
backport/backport-include/asm/dma-mapping.h +2 -2
index 844fe3b..b73b7da 100644
@@ -3,12 +3,12 @@
 #include_next <asm/dma-mapping.h>
 #include <linux/version.h>
 
-#if defined(CPTCFG_BACKPORT_BUILD_DMA_SHARED_HELPERS)
+#if defined(CPTCFG_BPAUTO_BUILD_DMA_SHARED_HELPERS)
 #define dma_common_get_sgtable LINUX_BACKPORT(dma_common_get_sgtable)
 int
 dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
 		       void *cpu_addr, dma_addr_t dma_addr, size_t size);
-#endif /* defined(CPTCFG_BACKPORT_BUILD_DMA_SHARED_HELPERS) */
+#endif /* defined(CPTCFG_BPAUTO_BUILD_DMA_SHARED_HELPERS) */
 
 #if LINUX_VERSION_CODE < KERNEL_VERSION(3,6,0)
 
backport/backport-include/backport/leds-disabled.h +1 -1
index 501f2a0..156d7fa 100644
@@ -8,7 +8,7 @@
  * allows compilation.
  */
 
-#ifdef CPTCFG_BACKPORT_BUILD_LEDS
+#ifdef CPTCFG_BPAUTO_BUILD_LEDS
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/rwsem.h>
backport/compat/Kconfig +37 -37

159 lines not on this page · raw message

backport/compat/Makefile +2 -2
index 6d210b0..0dd69fe 100644
@@ -21,5 +21,5 @@ compat-$(CPTCFG_BACKPORT_KERNEL_3_15) += backport-3.15.o
 compat-$(CPTCFG_BACKPORT_KERNEL_3_17) += backport-3.17.o
 compat-$(CPTCFG_BACKPORT_KERNEL_3_18) += backport-3.18.o
 
-compat-$(CPTCFG_BACKPORT_BUILD_CRYPTO_CCM) += crypto-ccm.o
-compat-$(CPTCFG_BACKPORT_BUILD_DMA_SHARED_HELPERS) += dma-shared-helpers.o
+compat-$(CPTCFG_BPAUTO_BUILD_CRYPTO_CCM) += crypto-ccm.o
+compat-$(CPTCFG_BPAUTO_BUILD_DMA_SHARED_HELPERS) += dma-shared-helpers.o
backport/compat/backports.h +2 -2
index c9094ac..323c908 100644
@@ -3,7 +3,7 @@
 
 #include <linux/version.h>
 
-#ifdef CPTCFG_BACKPORT_BUILD_CRYPTO_CCM
+#ifdef CPTCFG_BPAUTO_BUILD_CRYPTO_CCM
 int crypto_ccm_module_init(void);
 void crypto_ccm_module_exit(void);
 #else
@@ -13,7 +13,7 @@ static inline void crypto_ccm_module_exit(void)
 {}
 #endif
 
-#ifdef CPTCFG_BACKPORT_BUILD_WANT_DEV_COREDUMP
+#ifdef CPTCFG_BPAUTO_WANT_DEV_COREDUMP
 int devcoredump_init(void);
 void devcoredump_exit(void);
 #else
gentree.py +1 -1
index 55abe6d..e0618e5 100755
@@ -205,7 +205,7 @@ def add_automatic_backports(args, bp_prefix):
     configtree = kconfig.ConfigTree(os.path.join(args.outdir, 'Kconfig'))
     all_selects = configtree.all_selects()
     for sym, vals in bpi.items():
-        if sym.startswith('BACKPORT_BUILD_'):
+        if sym.startswith('BPAUTO_BUILD_'):
             if not sym[15:] in all_selects:
                 disable_list.append(sym)
                 continue
patches/backport-adjustments/devcoredump.patch +2 -2
index 3378884..3bf35f9 100644
@@ -107,7 +107,7 @@ index c0a360e99f64..da20e61f6c06 100644
  #include <linux/vmalloc.h>
  
 -#ifdef CONFIG_DEV_COREDUMP
-+#ifdef CPTCFG_BACKPORT_BUILD_WANT_DEV_COREDUMP
++#ifdef CPTCFG_BPAUTO_WANT_DEV_COREDUMP
  void dev_coredumpv(struct device *dev, const void *data, size_t datalen,
  		   gfp_t gfp);
  
@@ -116,6 +116,6 @@ index c0a360e99f64..da20e61f6c06 100644
  	free(data);
  }
 -#endif /* CONFIG_DEV_COREDUMP */
-+#endif /* CPTCFG_BACKPORT_BUILD_WANT_DEV_COREDUMP */
++#endif /* CPTCFG_BPAUTO_WANT_DEV_COREDUMP */
  
  #endif /* __DEVCOREDUMP_H */
Signature · 1 line
2.1.1
#35 lore raw

PATCH v2 12/13 backports: remove extra BACKPORT_ prefix from kernel versioning

In reply to Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

The CPTCFG_ prefix already implies backport, when integration is used we'd end up with a double BACKPORT_ prefix, so just remove the existing one as its not needed.

---
 backport/Makefile                                  |  2 +-
 backport/compat/Kconfig                            | 10 +++----
 backport/compat/Makefile                           | 34 +++++++++++-----------
 devel/doc/kconfig-operation                        |  6 ++--
 gentree.py                                         |  2 +-
 .../media/0002-no_dmabuf/v4l2.patch                |  6 ++--
 6 files changed, 30 insertions(+), 30 deletions(-)
backport/Makefile +1 -1
index fcf2f01..c21b813 100644
@@ -93,7 +93,7 @@ mrproper:
 		print=0									;\
 		for v in $$kvers ; do							\
 			if [ "$$print" = "1" ] ; then					\
-				echo config BACKPORT_KERNEL_$$(echo $$v | tr . _)	;\
+				echo config KERNEL_$$(echo $$v | tr . _)	;\
 				echo "    def_bool y"					;\
 			fi								;\
 			if [ "$$v" = "$$kver" ] ; then print=1 ; fi			;\
backport/compat/Kconfig +5 -5
index 06ef8d5..aadf246 100644
@@ -16,14 +16,14 @@
 #
 #	# not possible on kernel < X.Y, build will fail if any
 #	# drivers are allowed to build on kernels < X.Y
-#	depends on BACKPORT_KERNEL_X_Y
+#	depends on KERNEL_X_Y
 #
 #	# don't build the backport code if FOO is in the kernel
 #	# already, but only if the kernel version is also >= X.Z;
 #	# this is an example of backporting where the version of
 #	# the FOO subsystem that we need is only available from
 #	# kernel version X.Z
-#	depends on !FOO || BACKPORT_KERNEL_X_Z
+#	depends on !FOO || KERNEL_X_Z
 #
 #	# build if driver needs it (it selects BPAUTO_FOO)
 #	default m if BPAUTO_FOO
@@ -43,7 +43,7 @@
 #
 # config BPAUTO_BUILD_KFIFO
 #	def_bool y
-#	depends on BACKPORT_KERNEL_2_6_36
+#	depends on KERNEL_2_6_36
 #
 #
 # C) similarly, a kconfig symbol for an option, e.g.
@@ -83,9 +83,9 @@ config BPAUTO_BUILD_DMA_SHARED_HELPERS
 	depends on HAS_DMA
 	# Build on other kernels kernels < 3.9 if HAVE_GENERIC_DMA_COHERENT is
 	# not set. Kernels >= 3.8 have this if HAS_DMA is set.
-	depends on (!HAVE_GENERIC_DMA_COHERENT || BACKPORT_KERNEL_3_9)
+	depends on (!HAVE_GENERIC_DMA_COHERENT || KERNEL_3_9)
 	# Always build if on 3.3 - 3.5
-	default y if (BACKPORT_KERNEL_3_4 || BACKPORT_KERNEL_3_5 || BACKPORT_KERNEL_3_6)
+	default y if (KERNEL_3_4 || KERNEL_3_5 || KERNEL_3_6)
 	# build for testing
 	default y if BPAUTO_USERSEL_BUILD_ALL
 
backport/compat/Makefile +17 -17
index 0dd69fe..e787763 100644
@@ -3,23 +3,23 @@ obj-m += compat.o
 compat-y += main.o
 
 # Kernel backport compatibility code
-compat-$(CPTCFG_BACKPORT_KERNEL_3_0) += compat-3.0.o
-compat-$(CPTCFG_BACKPORT_KERNEL_3_1) += compat-3.1.o
-compat-$(CPTCFG_BACKPORT_KERNEL_3_2) += backport-3.2.o
-compat-$(CPTCFG_BACKPORT_KERNEL_3_3) += compat-3.3.o
-compat-$(CPTCFG_BACKPORT_KERNEL_3_4) += compat-3.4.o
-compat-$(CPTCFG_BACKPORT_KERNEL_3_5) += compat-3.5.o user_namespace.o
-compat-$(CPTCFG_BACKPORT_KERNEL_3_6) += compat-3.6.o
-compat-$(CPTCFG_BACKPORT_KERNEL_3_7) += compat-3.7.o
-compat-$(CPTCFG_BACKPORT_KERNEL_3_8) += compat-3.8.o
-compat-$(CPTCFG_BACKPORT_KERNEL_3_9) += compat-3.9.o
-compat-$(CPTCFG_BACKPORT_KERNEL_3_10) += backport-3.10.o
-compat-$(CPTCFG_BACKPORT_KERNEL_3_12) += backport-3.12.o
-compat-$(CPTCFG_BACKPORT_KERNEL_3_13) += backport-3.13.o
-compat-$(CPTCFG_BACKPORT_KERNEL_3_14) += backport-3.14.o
-compat-$(CPTCFG_BACKPORT_KERNEL_3_15) += backport-3.15.o
-compat-$(CPTCFG_BACKPORT_KERNEL_3_17) += backport-3.17.o
-compat-$(CPTCFG_BACKPORT_KERNEL_3_18) += backport-3.18.o
+compat-$(CPTCFG_KERNEL_3_0) += compat-3.0.o
+compat-$(CPTCFG_KERNEL_3_1) += compat-3.1.o
+compat-$(CPTCFG_KERNEL_3_2) += backport-3.2.o
+compat-$(CPTCFG_KERNEL_3_3) += compat-3.3.o
+compat-$(CPTCFG_KERNEL_3_4) += compat-3.4.o
+compat-$(CPTCFG_KERNEL_3_5) += compat-3.5.o user_namespace.o
+compat-$(CPTCFG_KERNEL_3_6) += compat-3.6.o
+compat-$(CPTCFG_KERNEL_3_7) += compat-3.7.o
+compat-$(CPTCFG_KERNEL_3_8) += compat-3.8.o
+compat-$(CPTCFG_KERNEL_3_9) += compat-3.9.o
+compat-$(CPTCFG_KERNEL_3_10) += backport-3.10.o
+compat-$(CPTCFG_KERNEL_3_12) += backport-3.12.o
+compat-$(CPTCFG_KERNEL_3_13) += backport-3.13.o
+compat-$(CPTCFG_KERNEL_3_14) += backport-3.14.o
+compat-$(CPTCFG_KERNEL_3_15) += backport-3.15.o
+compat-$(CPTCFG_KERNEL_3_17) += backport-3.17.o
+compat-$(CPTCFG_KERNEL_3_18) += backport-3.18.o
 
 compat-$(CPTCFG_BPAUTO_BUILD_CRYPTO_CCM) += crypto-ccm.o
 compat-$(CPTCFG_BPAUTO_BUILD_DMA_SHARED_HELPERS) += dma-shared-helpers.o
devel/doc/kconfig-operation +3 -3
index f1ecf60..ddb4de7 100644
@@ -53,12 +53,12 @@ The second file (Kconfig.versions) is generated from just the version of
 the kernel and also contains invisible and unselectable boolean options
 like
 
-config BACKPORT_KERNEL_X
+config KERNEL_X
     def_bool y
 
 to indicate that APIs introduced in kernel version X (e.g. 3_3 for 3.3
 or 2_6_24 for 2.6.24) must be backported. Essentially, the presence of
-a symbol BACKPORT_KERNEL_X indicates that the kernel that the code is
+a symbol KERNEL_X indicates that the kernel that the code is
 being compiled against is older than X.
 
 All together, this allows the correct options to be selected by the user.
@@ -121,7 +121,7 @@ These are the problems and their solutions:
     requires at least 2.6.29 due to the shash crypto code. This cannot be
     determined easily automatically, so the 'dependencies' file is read
     and options that are listed there are rewritten to include
-        depends on !BACKPORT_KERNEL_X_Y
+        depends on !KERNEL_X_Y
     (where X_Y is the listed kernel version), which makes them available
     only on kernels >= X.Y.
 
gentree.py +1 -1
index e0618e5..989b6ea 100755
@@ -930,7 +930,7 @@ def process(kerneldir, outdir, copy_list_file, git_revision=None,
             elif (dep == "DISABLE"):
                     new.append('BACKPORT_DISABLED_KCONFIG_OPTION')
             else:
-                    new.append('!BACKPORT_KERNEL_%s' % dep.replace('.', '_'))
+                    new.append('!KERNEL_%s' % dep.replace('.', '_'))
         deplist[sym] = new
     configtree.add_dependencies(deplist)
     git_debug_snapshot(args, "add kernel version dependencies")
patches/collateral-evolutions/media/0002-no_dmabuf/v4l2.patch +3 -3
index 02d042a..7f88c3e 100644
@@ -5,7 +5,7 @@
  # Used by drivers that need Videobuf2 modules
  config VIDEOBUF2_CORE
 -	select DMA_SHARED_BUFFER
-+	select DMA_SHARED_BUFFER if !BACKPORT_KERNEL_3_5
++	select DMA_SHARED_BUFFER if !KERNEL_3_5
  	tristate
  
  config VIDEOBUF2_MEMOPS
@@ -14,14 +14,14 @@
  	select VIDEOBUF2_CORE
  	select VIDEOBUF2_MEMOPS
 -	select DMA_SHARED_BUFFER
-+	select DMA_SHARED_BUFFER if !BACKPORT_KERNEL_3_5
++	select DMA_SHARED_BUFFER if !KERNEL_3_5
  
  config VIDEOBUF2_VMALLOC
  	tristate
  	select VIDEOBUF2_CORE
  	select VIDEOBUF2_MEMOPS
 -	select DMA_SHARED_BUFFER
-+	select DMA_SHARED_BUFFER if !BACKPORT_KERNEL_3_5
++	select DMA_SHARED_BUFFER if !KERNEL_3_5
  
  config VIDEOBUF2_DMA_SG
  	tristate
Signature · 1 line
2.1.1
#36 lore raw

PATCH v2 13/13 backports: add full kernel integration support

In reply to Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

This enables support for using the backports project to integrate device drivers from a future version of Linux into an older version of Linux. What you end up seeing is a backports submenu when configuring your kernel and the ability to select specific device drivers from subsystems supported through the Linux backports project.

At this time enabling one device driver from a future version of Linux will require using only the latest version of the subsystem modules and other subsystem drivers. For example enabling cfg80211 and mac80211 from a future version of Linux will require you to only use future version of the respective device drivers. In order to enable the backported version of 802.11 drivers for example, you will have to enable first:

Networking support -->
Wireless -->

But under that menu disable all options, then jump to the backports submenu to now enable:

Backports -->
cfg80211
mac80211
Wireless LAN --->
etc

You build these device drivers modular or built-in to the kernel. Integration support requires only slight modifications to the original kernel sources, one to the top level Kconfig to add our entry, and also the top level Makefile to enable backports code to be part of the built-in vmlinux.

Support for integration takes advantage over the existing infrastructure added by Johannes to keep track of each indvidual change done by the backports infrastructure if --gitdebug is used.

1   3.0.101             [  OK  ]
2   3.1.10              [  OK  ]
3   3.2.62              [  OK  ]
4   3.3.8               [  OK  ]
5   3.4.104             [  OK  ]
6   3.5.7               [  OK  ]
7   3.6.11              [  OK  ]
8   3.7.10              [  OK  ]
9   3.8.13              [  OK  ]
10  3.9.11              [  OK  ]
11  3.10.58             [  OK  ]
12  3.11.10             [  OK  ]
13  3.12.31             [  OK  ]
14  3.13.11             [  OK  ]
15  3.14.22             [  OK  ]
16  3.15.10             [  OK  ]
17  3.16.6              [  OK  ]
18  3.17.1              [  OK  ]
19  3.18-rc1            [  OK  ]
real    3m17.573s
user    67m33.172s
sys     18m27.596s
---
 backport/Kconfig.integrate                         | 36 +++++++++++
 backport/Makefile.kernel                           | 13 ++++
 backport/backport-include/backport/backport.h      |  5 ++
 backport/compat/Makefile                           |  4 ++
 backport/compat/main.c                             |  8 ++-
 devel/doc/kconfig-operation                        |  5 ++
 gentree.py                                         | 69 +++++++++++++++++++---
 .../0001-enable-backports-built-in.patch           | 40 +++++++++++++
 lib/bpversion.py                                   | 48 +++++++++++++++
 lib/kconfig.py                                     | 17 ++++++
 10 files changed, 236 insertions(+), 9 deletions(-)
 create mode 100644 backport/Kconfig.integrate
 create mode 100644 integration-patches/0001-enable-backports/0001-enable-backports-built-in.patch
 create mode 100644 lib/bpversion.py
backport/Kconfig.integrate new file +36 -0
new file mode 100644
index 0000000..f64a3f6
@@ -0,0 +1,36 @@
+config BACKPORT_INTEGRATE
+	bool
+	def_bool y
+
+config BACKPORT_DIR
+	string
+	default "%%BACKPORT_DIR%%"
+
+config BACKPORT_VERSION
+	string
+	default "%%BACKPORTS_VERSION%%"
+
+config BACKPORT_KERNEL_VERSION
+	string
+	default "%%BACKPORTED_KERNEL_VERSION%%"
+
+config BACKPORT_KERNEL_NAME
+	string
+	default "%%BACKPORTED_KERNEL_NAME%%"
+
+menuconfig BACKPORT_LINUX
+	bool "Backport %%BACKPORTED_KERNEL_NAME%% %%BACKPORTED_KERNEL_VERSION%% (backports %%BACKPORTS_VERSION%%)"
+	default n
+	---help---
+	  Enabling this will let give you the opportunity to use features and
+	  drivers backported from %%BACKPORTED_KERNEL_NAME%% %%BACKPORTED_KERNEL_VERSION%%
+	  on the kernel your are using. This is experimental and you should
+	  say no unless you'd like to help test things or want to help debug
+	  this should we run into any issues.
+
+if BACKPORT_LINUX
+
+source "$BACKPORT_DIR/Kconfig.versions"
+source "$BACKPORT_DIR/Kconfig.sources"
+
+endif # BACKPORT_LINUX
backport/Makefile.kernel +13 -0
index a63184b..c57b2d3 100644
@@ -1,3 +1,4 @@
+ifeq ($(CONFIG_BACKPORT_INTEGRATE),)
 # Since 2.6.21, try-run is available, but cc-disable-warning
 # was only added later, so we add it here ourselves:
 backport-cc-disable-warning = $(call try-run,\
@@ -17,6 +18,18 @@ NOSTDINC_FLAGS := \
 	$(CFLAGS)
 
 export backport_srctree = $(M)
+else
+export BACKPORT_DIR = backports/
+export backport_srctree = $(BACKPORT_DIR)
+NOSTDINC_FLAGS := \
+	-I$(BACKPORT_DIR)/backport-include/ \
+	-I$(BACKPORT_DIR)/backport-include/uapi \
+	-I$(BACKPORT_DIR)/include/ \
+	-I$(BACKPORT_DIR)/include/uapi \
+	-include $(BACKPORT_DIR)/backport-include/backport/backport.h \
+	$(CFLAGS)
+endif
+
 
 obj-y += compat/
 
backport/backport-include/backport/backport.h +5 -0
index 7cf21aa..d1d3b10 100644
@@ -1,11 +1,16 @@
 #ifndef __BACKPORT_H
 #define __BACKPORT_H
+#include <generated/autoconf.h>
+#ifndef CONFIG_BACKPORT_INTEGRATE
 #include <backport/autoconf.h>
+#endif
 #include <linux/kconfig.h>
 
 #ifndef __ASSEMBLY__
 #define LINUX_BACKPORT(__sym) backport_ ##__sym
+#ifndef CONFIG_BACKPORT_INTEGRATE
 #include <backport/checks.h>
 #endif
+#endif
 
 #endif /* __BACKPORT_H */
backport/compat/Makefile +4 -0
index e787763..f14b516 100644
@@ -1,5 +1,9 @@
 ccflags-y += -I$(src)
+ifeq ($(CONFIG_BACKPORT_INTEGRATE),)
 obj-m += compat.o
+else
+obj-y += compat.o
+endif
 compat-y += main.o
 
 # Kernel backport compatibility code
backport/compat/main.c +7 -1
index 04ebbfd..5d45e3d 100644
@@ -71,8 +71,14 @@ static int __init backport_init(void)
 #ifdef BACKPORTS_GIT_TRACKED
 	printk(KERN_INFO BACKPORTS_GIT_TRACKED "\n");
 #else
+
+#ifdef CONFIG_BACKPORT_INTEGRATE
+	printk(KERN_INFO "Backport integrated by backports.git " CPTCFG_VERSION "\n");
+#else
 	printk(KERN_INFO "Backport generated by backports.git " CPTCFG_VERSION "\n");
-#endif
+#endif /* CONFIG_BACKPORT_INTEGRATE */
+
+#endif /* BACKPORTS_GIT_TRACKED */
 
         return 0;
 }
devel/doc/kconfig-operation +5 -0
index ddb4de7..35e198c 100644
@@ -73,6 +73,11 @@ This allows code to, for example, have "#ifdef CONFIG_PM" which can only
 be set or cleared in the kernel, not in the backport configuration. Since
 this is needed, a transformation step is done at backport creation time.
 
+When using Linux backports to integrate into an existing Linux tree
+the CONFIG_BACKPORT_ prefix is used, this allows a CONFIG_BACKPORT_
+symbol to depend on the non-backported respective symbol to be selected
+allowing these to be mutually exclusive.
+
  Backport creation for Kconfig
 -------------------------------
 
gentree.py +61 -8

175 lines not on this page · raw message

integration-patches/0001-enable-backports/0001-enable-backports-built-in.patch new file +40 -0
new file mode 100644
index 0000000..d66b203
@@ -0,0 +1,40 @@
+Allow backports to be integrated into vmlinux.
+
+diff --git a/Makefile b/Makefile
+index 6d1e304..de26b18 100644
+--- a/Makefile
++++ b/Makefile
+@@ -542,6 +542,7 @@ scripts: scripts_basic include/config/auto.conf include/config/tristate.conf \
+ 	$(Q)$(MAKE) $(build)=$(@)
+ 
+ # Objects we will link into vmlinux / subdirs we need to visit
++backports-y 	:= backports/
+ init-y		:= init/
+ drivers-y	:= drivers/ sound/ firmware/
+ net-y		:= net/
+@@ -820,13 +821,16 @@ core-y		+= kernel/ mm/ fs/ ipc/ security/ crypto/ block/
+ 
+ vmlinux-dirs	:= $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
+ 		     $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
++		     $(backports-y) $(backports-m) \
+ 		     $(net-y) $(net-m) $(libs-y) $(libs-m)))
+ 
+ vmlinux-alldirs	:= $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
+ 		     $(init-n) $(init-) \
+ 		     $(core-n) $(core-) $(drivers-n) $(drivers-) \
++		     $(backports-n) $(backports-) \
+ 		     $(net-n)  $(net-)  $(libs-n)    $(libs-))))
+ 
++backports-y	:= $(patsubst %/, %/built-in.o, $(backports-y))
+ init-y		:= $(patsubst %/, %/built-in.o, $(init-y))
+ core-y		:= $(patsubst %/, %/built-in.o, $(core-y))
+ drivers-y	:= $(patsubst %/, %/built-in.o, $(drivers-y))
+@@ -837,7 +841,7 @@ libs-y		:= $(libs-y1) $(libs-y2)
+ 
+ # Externally visible symbols (used by link-vmlinux.sh)
+ export KBUILD_VMLINUX_INIT := $(head-y) $(init-y)
+-export KBUILD_VMLINUX_MAIN := $(core-y) $(libs-y) $(drivers-y) $(net-y)
++export KBUILD_VMLINUX_MAIN := $(core-y) $(libs-y) $(drivers-y) $(net-y) $(backports-y)
+ export KBUILD_LDS          := arch/$(SRCARCH)/kernel/vmlinux.lds
+ export LDFLAGS_vmlinux
+ # used by scripts/pacmage/Makefile
lib/bpversion.py new file +48 -0

48 lines not on this page · raw message

lib/kconfig.py +17 -0
index 430b642..fd11ea1 100644
@@ -12,6 +12,10 @@ cfg_line = re.compile(r'^(?P<opt>config|menuconfig)\s+(?P<sym>[^\s]*)')
 sel_line = re.compile(r'^(?P<spc>\s+)select\s+(?P<sym>[^\s]*)\s*$')
 backport_line = re.compile(r'^\s+#(?P<key>[ch]-file|module-name)\s*(?P<name>.*)')
 ignore_parse_p = re.compile(r'^\s*#(?P<key>ignore-parser-package)')
+kernel_version_config = re.compile(r'^(?P<opt>config)\s+(?P<sym>BACKPORT_KERNEL_[\d])')
+ignore_bp_syms = 'BACKPORT_DIR|BACKPORT_VERSION|BACKPORT_KERNEL_VERSION|BACKPORT_KERNEL_NAME|BACKPORT_LINUX|BACKPORT_INTEGRATE'
+ignore_syms = re.compile(r'^(?P<opt>config|menuconfig)\s+(?P<sym>' + ignore_bp_syms + ')')
+ignore_cond_syms = re.compile(r'^(?P<cond>if|endif)\s*#*\s*(?P<sym>' + ignore_bp_syms + ')')
 
 class ConfigTree(object):
     def __init__(self, rootfile):
@@ -107,6 +111,19 @@ class ConfigTree(object):
                 if pm:
                     ignore_parse_modular = True
                     continue
+                vm = kernel_version_config.match(l)
+                if vm:
+                    out += l
+                    continue
+                cm = ignore_cond_syms.match(l)
+                if cm:
+                    out += l
+                    ignore_parse_modular = False
+                    continue
+                ig = ignore_syms.match(l)
+                if ig:
+                    out += l
+                    continue
                 n = cfg_line.match(l)
                 if n:
                     m = n
Signature · 1 line
2.1.1