Skip to contentSkip to conversation

Enable hierarchy irqdomian on x86 platforms

PATCH Superseded Jiang Liu 3 participants 37 messages Nov 6, 2014 – Nov 11, 2014

Subsystems (9)
Documentation x86 ACPI PCI +5 more subsystems

v5 of 8 Superseded Latest is v8 →

lore
Share & tools
lore

Jiang Liu

author
#0 lore raw

v5 cover Enable hierarchy irqdomian on x86 platforms

We plan to restructure x86 interrupt code based on hierarchy irqdomain, that is to build irqdomains for CPU vector, interrupt remapping unit, IOAPIC, MSI and HPET etc and organize those irqdomains in hierarchy mode. Each irqdomain manages corresponding interrupt controller and talks to parent interrupt controller through public irqdomain interfaces. We also support stacked irq_chip based on hierarchy irqdomain. It will make the x86 interrupt architecture much more clear and more easy to maintain with hierarchy irqdomain and stacked irq_chip. It may also help ARM interrupt management architecture too.

This is the second patch set to enable support of hierarchy irqdomain on x86 platforms. It's based on tip/x86/apic branch.
And you may access it at:
https://github.com/jiangliu/linux.git irqdomain/p2v5

And there will be a third patch set to convert IOAPIC driver to support hierarchy irqdomain and clean up code.

Patch 1-5 enhance irqdomain and irq core to support hierarchy irqdomain and stacked irqchip.
Patch 6-12 implement an irqdomain to manange CPU interrupt vectors, and it's the root irqdomain for x86 platforms.
Patch 13-16 converts Intel and AMD interrupt remapping drivers to support hierarchy irqdomain.
Patch 17-23 converts HPET and MSI to support hierarchy irqdomain. Patch 24-27 cleans up unsued code in x86 arch and interrupt remapping drivers.
Patch 28-31 converts DMAR, HTIRQ and UV to support hierarchy irqdomain.

We have tested this patchset on Intel 32-bit and 64-bit systems. And it also passes Fengguang's 0day tests. But helps are need for testing:
1) AMD HT_IRQ
2) UV platform

V4->V5:
1) Refine PCI MSI interfaces to support hierarchy irqdomain
2) Fix a bug with dealing multiple MSI interrupts
3) Improve commit messages
V3->V4:
1) Simplify IRQ remapping interfaces
2) Hide all IRQ remapping logic from MSI/HPET drivers
3) Move most MSI irqdomain code to public drivers/pci/msi.c so it could be resued
4) Improve common PCI MSI code
5) Rebase to tip/x86/apic
V2->V3:
1) Fix bugs in handling OF irqdomain
2) Add documentation
3) Rebase to v3.18-rc2
V1->V2
1) Add hierarchy iredomain support of DMAR IRQ and UV IRQ.
2) Fix bugs reported by Joe C.
3) Address all review comments from Thomas
4) Fix a bug found during tests
5) Fix errors and warning found by 0day tests

Jiang Liu (30):
irqdomain: Introduce new interfaces to support hierarchy irqdomains
genirq: Introduce helper functions to support stacked irq_chip
genirq: Introduce irq_chip.irq_compose_msi_msg() to support stacked
irqchip
genirq: Add IRQ_SET_MASK_OK_DONE to support stacked irqchip x86, irq: Save destination CPU ID in irq_cfg
x86, irq: Use hierarchy irqdomain to manage CPU interrupt vectors x86, hpet: Use new irqdomain interfaces to allocate/free IRQ x86, MSI: Use new irqdomain interfaces to allocate/free IRQ x86, uv: Use new irqdomain interfaces to allocate/free IRQ x86, htirq: Use new irqdomain interfaces to allocate/free IRQ x86, dmar: Use new irqdomain interfaces to allocate/free IRQ
x86: irq_remapping: Introduce new interfaces to support hierarchy
irqdomain
iommu/vt-d: Change prototypes to prepare for enabling hierarchy
irqdomain
iommu/vt-d: Enhance Intel IR driver to suppport hierarchy irqdomain iommu/amd: Enhance AMD IR driver to suppport hierarchy irqdomain x86, hpet: Enhance HPET IRQ to support hierarchy irqdomain PCI/MSI: Remove unnecessary braces around single statements PCI/MSI: Simplify PCI MSI code by initializing msi_desc.nvec_used
earlier
PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X
interrupts
PCI/MSI: Enhance core to support hierarchy irqdomain x86, PCI, MSI: Use hierarchy irqdomain to manage MSI interrupts x86, irq: Directly call native_compose_msi_msg() for DMAR IRQ iommu/vt-d: Clean up unused MSI related code
iommu/amd: Clean up unused MSI related code
x86: irq_remapping: Clean up unused MSI related code x86, irq: Clean up unused MSI related code and interfaces iommu/vt-d: Refine the interfaces to create IRQ for DMAR unit x86, irq: Use hierarchy irqdomain to manage DMAR interrupts x86, htirq: Use hierarchy irqdomain to manage Hypertransport
interrupts
x86, uv: Use hierarchy irqdomain to manage UV interrupts

Yingjoe Chen (1):
irqdomain: Do irq_find_mapping and set_type for hierarchy irqdomain
in case OF

 Documentation/IRQ-domain.txt          |   71 +++++
 arch/ia64/include/asm/irq_remapping.h |    2 -
 arch/ia64/kernel/msi_ia64.c           |   30 ++-
 arch/x86/Kconfig                      |    4 +-
 arch/x86/include/asm/hpet.h           |   16 +-
 arch/x86/include/asm/hw_irq.h         |   87 ++++++
 arch/x86/include/asm/irq_remapping.h  |   50 ++--
 arch/x86/include/asm/pci.h            |    5 -
 arch/x86/include/asm/x86_init.h       |    4 -
 arch/x86/kernel/apic/htirq.c          |  174 ++++++++----
 arch/x86/kernel/apic/io_apic.c        |    3 -
 arch/x86/kernel/apic/msi.c            |  422 ++++++++++++++++++++----------
 arch/x86/kernel/apic/vector.c         |  165 +++++++++++-
 arch/x86/kernel/hpet.c                |   57 ++--
 arch/x86/kernel/x86_init.c            |    2 -
 arch/x86/platform/uv/uv_irq.c         |  299 ++++++++-------------
 drivers/iommu/amd_iommu.c             |  378 +++++++++++++++++++++------
 drivers/iommu/amd_iommu_init.c        |    4 +
 drivers/iommu/amd_iommu_proto.h       |    9 +
 drivers/iommu/amd_iommu_types.h       |    5 +
 drivers/iommu/dmar.c                  |   19 +-
 drivers/iommu/intel_irq_remapping.c   |  465 ++++++++++++++++++++++-----------
 drivers/iommu/irq_remapping.c         |  197 ++++----------
 drivers/iommu/irq_remapping.h         |   20 +-
 drivers/pci/Kconfig                   |    4 +
 drivers/pci/htirq.c                   |   48 +---
 drivers/pci/msi.c                     |  184 ++++++++++---
 include/linux/dmar.h                  |    3 +-
 include/linux/htirq.h                 |   22 +-
 include/linux/intel-iommu.h           |    4 +
 include/linux/irq.h                   |   19 ++
 include/linux/irqdomain.h             |   86 ++++++
 include/linux/msi.h                   |   14 +
 kernel/irq/Kconfig                    |    4 +
 kernel/irq/chip.c                     |   37 +++
 kernel/irq/irqdomain.c                |  408 +++++++++++++++++++++++++++--
 kernel/irq/manage.c                   |    2 +
 37 files changed, 2327 insertions(+), 996 deletions(-)
Signature · 1 line
1.7.10.4
author
#1 lore raw

PATCH v5 1/31 irqdomain: Introduce new interfaces to support hierarchy irqdomains

We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain.

There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces.

According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity().

The new hierarchy irqdomain introduces following interfaces:
1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources.
2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs.
3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt.

There are also several help functions to ease irqdomain implemenations:
1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain.
2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data.
3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks.

We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts.

---
 Documentation/IRQ-domain.txt |   71 ++++++++
 include/linux/irq.h          |    5 +
 include/linux/irqdomain.h    |   86 ++++++++++
 kernel/irq/Kconfig           |    4 +
 kernel/irq/chip.c            |    3 +
 kernel/irq/irqdomain.c       |  391 ++++++++++++++++++++++++++++++++++++++++--
 6 files changed, 544 insertions(+), 16 deletions(-)
Documentation/IRQ-domain.txt +71 -0
index 8a8b82c9ca53..39cfa72732ff 100644
@@ -151,3 +151,74 @@ used and no descriptor gets allocated it is very important to make sure
 that the driver using the simple domain call irq_create_mapping()
 before any irq_find_mapping() since the latter will actually work
 for the static IRQ assignment case.
+
+==== Hierarchy IRQ domain ====
+On some architectures, there may be multiple interrupt controllers
+involved in delivering an interrupt from the device to the target CPU.
+Let's look at a typical interrupt delivering path on x86 platforms:
+
+Device --> IOAPIC -> Interrupt remapping Controller -> Local APIC -> CPU
+
+There are three interrupt controllers involved:
+1) IOAPIC controller
+2) Interrupt remapping controller
+3) Local APIC controller
+
+To support such a hardware topology and make software architecture match
+hardware architecture, an irq_domain data structure is built for each
+interrupt controller and those irq_domains are organized into hierarchy.
+When building irq_domain hierarchy, the irq_domain near to the device is
+child and the irq_domain near to CPU is parent. So a hierarchy structure
+as below will be built for the example above.
+	CPU Vector irq_domain (root irq_domain to manage CPU vectors)
+		^
+		|
+	Interrupt Remapping irq_domain (manage irq_remapping entries)
+		^
+		|
+	IOAPIC irq_domain (manage IOAPIC delivery entries/pins)
+
+There are four major interfaces to use hierarchy irq_domain:
+1) irq_domain_alloc_irqs(): allocate IRQ descriptors and interrupt
+   controller related resources to deliver these interrupts.
+2) irq_domain_free_irqs(): free IRQ descriptors and interrupt controller
+   related resources associated with these interrupts.
+3) irq_domain_activate_irq(): activate interrupt controller hardware to
+   deliver the interrupt.
+3) irq_domain_deactivate_irq(): deactivate interrupt controller hardware
+   to stop delivering the interrupt.
+
+Following changes are needed to support hierarchy irq_domain.
+1) a new field 'parent' is added to struct irq_domain; it's used to
+   maintain irq_domain hierarchy information.
+2) a new field 'parent_data' is added to struct irq_data; it's used to
+   build hierarchy irq_data to match hierarchy irq_domains. The irq_data
+   is used to store irq_domain pointer and hardware irq number.
+3) new callbacks are added to struct irq_domain_ops to support hierarchy
+   irq_domain operations.
+
+With support of hierarchy irq_domain and hierarchy irq_data ready, an
+irq_domain structure is built for each interrupt controller, and an
+irq_data structure is allocated for each irq_domain associated with an
+IRQ. Now we could go one step further to support stacked(hierarchy)
+irq_chip. That is, an irq_chip is associated with each irq_data along
+the hierarchy. A child irq_chip may implement a required action by
+itself or by cooperating with its parent irq_chip.
+
+With stacked irq_chip, interrupt controller driver only needs to deal
+with the hardware managed by itself and may ask for services from its
+parent irq_chip when needed. So we could achieve a much cleaner
+software architecture.
+
+For an interrupt controller driver to support hierarchy irq_domain, it
+needs to:
+1) Implement irq_domain_ops.alloc and irq_domain_ops.free
+2) Optionally implement irq_domain_ops.activate and
+   irq_domain_ops.deactivate.
+3) Optionally implement an irq_chip to manage the interrupt controller
+   hardware.
+4) No need to implement irq_domain_ops.map and irq_domain_ops.unmap,
+   they are unused with hierarchy irq_domain.
+
+Hierarchy irq_domain may also be used to support other architectures,
+such as ARM, ARM64 etc.
include/linux/irq.h +5 -0
index 03f48d936f66..13ba412ce3a0 100644
@@ -133,6 +133,8 @@ struct irq_domain;
  * @chip:		low level interrupt hardware access
  * @domain:		Interrupt translation domain; responsible for mapping
  *			between hwirq number and linux irq number.
+ * @parent_data:	pointer to parent struct irq_data to support hierarchy
+ *			irq_domain
  * @handler_data:	per-IRQ data for the irq_chip methods
  * @chip_data:		platform-specific per-chip private data for the chip
  *			methods, to allow shared chip implementations
@@ -151,6 +153,9 @@ struct irq_data {
 	unsigned int		state_use_accessors;
 	struct irq_chip		*chip;
 	struct irq_domain	*domain;
+#ifdef	CONFIG_IRQ_DOMAIN_HIERARCHY
+	struct irq_data		*parent_data;
+#endif
 	void			*handler_data;
 	void			*chip_data;
 	struct msi_desc		*msi_desc;
include/linux/irqdomain.h +86 -0

134 lines not on this page · raw message

kernel/irq/Kconfig +4 -0
index 225086b2652e..e9b580eccc01 100644
@@ -55,6 +55,10 @@ config GENERIC_IRQ_CHIP
 config IRQ_DOMAIN
 	bool
 
+config IRQ_DOMAIN_HIERARCHY
+	bool
+	depends on IRQ_DOMAIN
+
 config HANDLE_DOMAIN_IRQ
 	bool
 
kernel/irq/chip.c +3 -0
index e5202f00cabc..72a93086216b 100644
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
+#include <linux/irqdomain.h>
 
 #include <trace/events/irq.h>
 
@@ -178,6 +179,7 @@ int irq_startup(struct irq_desc *desc, bool resend)
 	irq_state_clr_disabled(desc);
 	desc->depth = 0;
 
+	irq_domain_activate_irq(&desc->irq_data);
 	if (desc->irq_data.chip->irq_startup) {
 		ret = desc->irq_data.chip->irq_startup(&desc->irq_data);
 		irq_state_clr_masked(desc);
@@ -199,6 +201,7 @@ void irq_shutdown(struct irq_desc *desc)
 		desc->irq_data.chip->irq_disable(&desc->irq_data);
 	else
 		desc->irq_data.chip->irq_mask(&desc->irq_data);
+	irq_domain_deactivate_irq(&desc->irq_data);
 	irq_state_set_masked(desc);
 }
 
kernel/irq/irqdomain.c +375 -16

454 lines not on this page · raw message

Signature · 1 line
1.7.10.4
author
#2 lore raw

PATCH v5 2/31 irqdomain: Do irq_find_mapping and set_type for hierarchy irqdomain in case OF

In reply to Jiang Liu

From: Yingjoe Chen <[email protected]>

It is possible to call irq_create_of_mapping to create/translate the same IRQ from DT for multiple times. Perform irq_find_mapping check and set_type for hierarchy irqdomain in irq_create_of_mapping() to avoid duplicate these functionality in all outer most irqdomain.

---
 kernel/irq/irqdomain.c |   27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)
kernel/irq/irqdomain.c +18 -9
index 610891e63844..4811bee1b8a7 100644
@@ -478,11 +478,6 @@ unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data)
 		return 0;
 	}
 
-	if (irq_domain_is_hierarchy(domain)) {
-		virq = irq_domain_alloc_irqs(domain, 1, NUMA_NO_NODE, irq_data);
-		return virq <= 0 ? 0 : virq;
-	}
-
 	/* If domain has no translation, then we assume interrupt line */
 	if (domain->ops->xlate == NULL)
 		hwirq = irq_data->args[0];
@@ -492,10 +487,24 @@ unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data)
 			return 0;
 	}
 
-	/* Create mapping */
-	virq = irq_create_mapping(domain, hwirq);
-	if (!virq)
-		return virq;
+	if (irq_domain_is_hierarchy(domain)) {
+		/*
+		 * If we've already configured this interrupt,
+		 * don't do it again, or hell will break loose.
+		 */
+		virq = irq_find_mapping(domain, hwirq);
+		if (virq)
+			return virq;
+
+		virq = irq_domain_alloc_irqs(domain, 1, NUMA_NO_NODE, irq_data);
+		if (virq <= 0)
+			return 0;
+	} else {
+		/* Create mapping */
+		virq = irq_create_mapping(domain, hwirq);
+		if (!virq)
+			return virq;
+	}
 
 	/* Set type if specified and different than the current one */
 	if (type != IRQ_TYPE_NONE &&
Signature · 1 line
1.7.10.4
author
#3 lore raw

PATCH v5 3/31 genirq: Introduce helper functions to support stacked irq_chip

In reply to Jiang Liu

Now we already support hierarchy irq_data, so introduce several helpers to support stacked irq_chips.

---
 include/linux/irq.h |    5 +++++
 kernel/irq/chip.c   |   17 +++++++++++++++++
 2 files changed, 22 insertions(+)
include/linux/irq.h +5 -0
index 13ba412ce3a0..0adcbbbf2e87 100644
@@ -443,6 +443,11 @@ extern void handle_percpu_devid_irq(unsigned int irq, struct irq_desc *desc);
 extern void handle_bad_irq(unsigned int irq, struct irq_desc *desc);
 extern void handle_nested_irq(unsigned int irq);
 
+#ifdef	CONFIG_IRQ_DOMAIN_HIERARCHY
+extern void irq_chip_ack_parent(struct irq_data *data);
+extern int irq_chip_retrigger_hierarchy(struct irq_data *data);
+#endif
+
 /* Handling of unhandled and spurious interrupts: */
 extern void note_interrupt(unsigned int irq, struct irq_desc *desc,
 			   irqreturn_t action_ret);
kernel/irq/chip.c +17 -0
index 72a93086216b..12f3e72449eb 100644
@@ -850,3 +850,20 @@ void irq_cpu_offline(void)
 		raw_spin_unlock_irqrestore(&desc->lock, flags);
 	}
 }
+
+#ifdef	CONFIG_IRQ_DOMAIN_HIERARCHY
+void irq_chip_ack_parent(struct irq_data *data)
+{
+	data = data->parent_data;
+	data->chip->irq_ack(data);
+}
+
+int irq_chip_retrigger_hierarchy(struct irq_data *data)
+{
+	for (data = data->parent_data; data; data = data->parent_data)
+		if (data->chip && data->chip->irq_retrigger)
+			return data->chip->irq_retrigger(data);
+
+	return -ENOSYS;
+}
+#endif
Signature · 1 line
1.7.10.4
author
#4 lore raw

PATCH v5 4/31 genirq: Introduce irq_chip.irq_compose_msi_msg() to support stacked irqchip

In reply to Jiang Liu

Add callback irq_compose_msi_msg to struct irq_chip, which will be used to support stacked irqchip.

---
 include/linux/irq.h |    5 +++++
 kernel/irq/chip.c   |   17 +++++++++++++++++
 2 files changed, 22 insertions(+)
include/linux/irq.h +5 -0
index 0adcbbbf2e87..536b7fc6c8f4 100644
@@ -29,6 +29,7 @@ struct seq_file;
 struct module;
 struct irq_desc;
 struct irq_data;
+struct msi_msg;
 typedef	void (*irq_flow_handler_t)(unsigned int irq,
 					    struct irq_desc *desc);
 typedef	void (*irq_preflow_handler_t)(struct irq_data *data);
@@ -320,6 +321,7 @@ static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
  *				any other callback related to this irq
  * @irq_release_resources:	optional to release resources acquired with
  *				irq_request_resources
+ * @irq_compose_msi_msg:	optional to compose message content for MSI
  * @flags:		chip specific flags
  */
 struct irq_chip {
@@ -356,6 +358,8 @@ struct irq_chip {
 	int		(*irq_request_resources)(struct irq_data *data);
 	void		(*irq_release_resources)(struct irq_data *data);
 
+	void		(*irq_compose_msi_msg)(struct irq_data *data, struct msi_msg *msg);
+
 	unsigned long	flags;
 };
 
@@ -443,6 +447,7 @@ extern void handle_percpu_devid_irq(unsigned int irq, struct irq_desc *desc);
 extern void handle_bad_irq(unsigned int irq, struct irq_desc *desc);
 extern void handle_nested_irq(unsigned int irq);
 
+extern int irq_chip_compose_msi_msg(struct irq_data *data, struct msi_msg *msg);
 #ifdef	CONFIG_IRQ_DOMAIN_HIERARCHY
 extern void irq_chip_ack_parent(struct irq_data *data);
 extern int irq_chip_retrigger_hierarchy(struct irq_data *data);
kernel/irq/chip.c +17 -0
index 12f3e72449eb..8f362db17a8a 100644
@@ -867,3 +867,20 @@ int irq_chip_retrigger_hierarchy(struct irq_data *data)
 	return -ENOSYS;
 }
 #endif
+
+int irq_chip_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
+{
+	struct irq_data *pos = NULL;
+
+#ifdef	CONFIG_IRQ_DOMAIN_HIERARCHY
+	for (; data; data = data->parent_data)
+#endif
+		if (data->chip && data->chip->irq_compose_msi_msg)
+			pos = data;
+	if (!pos)
+		return -ENOSYS;
+
+	pos->chip->irq_compose_msi_msg(pos, msg);
+
+	return 0;
+}
Signature · 1 line
1.7.10.4
author
#5 lore raw

PATCH v5 5/31 genirq: Add IRQ_SET_MASK_OK_DONE to support stacked irqchip

In reply to Jiang Liu

Add IRQ_SET_MASK_OK_DONE in addition to IRQ_SET_MASK_OK and IRQ_SET_MASK_OK_NOCOPY to support stacked irqchip. IRQ_SET_MASK_OK_DONE is the same as IRQ_SET_MASK_OK to irq core. To stacked irqchip, it means that ascendant irqchips have done all the work and no more handling needed in descendant irqchips.

---
 include/linux/irq.h |    4 ++++
 kernel/irq/manage.c |    2 ++
 2 files changed, 6 insertions(+)
include/linux/irq.h +4 -0
index 536b7fc6c8f4..041edd6dc409 100644
@@ -114,10 +114,14 @@ enum {
  *
  * IRQ_SET_MASK_OK	- OK, core updates irq_data.affinity
  * IRQ_SET_MASK_NOCPY	- OK, chip did update irq_data.affinity
+ * IRQ_SET_MASK_OK_DONE	- Same as IRQ_SET_MASK_OK for core. Special code to
+ *			  support stacked irqchips, which indicates skipping
+ *			  all descendent irqchips.
  */
 enum {
 	IRQ_SET_MASK_OK = 0,
 	IRQ_SET_MASK_OK_NOCOPY,
+	IRQ_SET_MASK_OK_DONE,
 };
 
 struct msi_desc;
kernel/irq/manage.c +2 -0
index 0a9104b4608b..80692373abd6 100644
@@ -183,6 +183,7 @@ int irq_do_set_affinity(struct irq_data *data, const struct cpumask *mask,
 	ret = chip->irq_set_affinity(data, mask, force);
 	switch (ret) {
 	case IRQ_SET_MASK_OK:
+	case IRQ_SET_MASK_OK_DONE:
 		cpumask_copy(data->affinity, mask);
 	case IRQ_SET_MASK_OK_NOCOPY:
 		irq_set_thread_affinity(desc);
@@ -600,6 +601,7 @@ int __irq_set_trigger(struct irq_desc *desc, unsigned int irq,
 
 	switch (ret) {
 	case IRQ_SET_MASK_OK:
+	case IRQ_SET_MASK_OK_DONE:
 		irqd_clear(&desc->irq_data, IRQD_TRIGGER_MASK);
 		irqd_set(&desc->irq_data, flags);
 
Signature · 1 line
1.7.10.4
author
#6 lore raw

PATCH v5 6/31 x86, irq: Save destination CPU ID in irq_cfg

In reply to Jiang Liu

Cache destination CPU APIC ID into struct irq_cfg when assigning vector for interrupt. Upper layer just needs to read the cached APIC ID instead of calling apic->cpu_mask_to_apicid_and(), it helps to hide APIC driver details from IOAPIC/HPET/MSI drivers..

---
 arch/x86/include/asm/hw_irq.h |    1 +
 arch/x86/kernel/apic/vector.c |    6 ++++++
 2 files changed, 7 insertions(+)
arch/x86/include/asm/hw_irq.h +1 -0
index 9662290e0b20..b988ddf7434b 100644
@@ -116,6 +116,7 @@ struct irq_data;
 struct irq_cfg {
 	cpumask_var_t		domain;
 	cpumask_var_t		old_domain;
+	unsigned int		dest_apicid;
 	u8			vector;
 	u8			move_in_progress : 1;
 #ifdef CONFIG_IRQ_REMAP
arch/x86/kernel/apic/vector.c +6 -0
index 6cedd7914581..c724ef6b218c 100644
@@ -188,6 +188,12 @@ next:
 	}
 	free_cpumask_var(tmp_mask);
 
+	if (!err) {
+		/* cache destination APIC IDs into cfg->dest_apicid */
+		err = apic->cpu_mask_to_apicid_and(mask, cfg->domain,
+						   &cfg->dest_apicid);
+	}
+
 	return err;
 }
 
Signature · 1 line
1.7.10.4
author
#7 lore raw

PATCH v5 7/31 x86, irq: Use hierarchy irqdomain to manage CPU interrupt vectors

In reply to Jiang Liu

Abstract CPU local APIC as an interrupt controller and create an irqdomain for it to manage CPU interupt vectors. It's the base to enable hierarchy irqdomain on x86 systems. Eventually we will build a irqdomain hiearchy as below:
IOAPIC domain-------|
MSI/MSI-x domain------> [Inerrupt Remapping domain] -> CPU vector domain

HPET_IRQ domain_____|                                         ^
DMAR domain---------------------------------------------------|
HT_IRQ domain-------------------------------------------------|
---
 arch/x86/Kconfig               |    3 +-
 arch/x86/include/asm/hw_irq.h  |   15 ++++
 arch/x86/kernel/apic/io_apic.c |    3 -
 arch/x86/kernel/apic/vector.c  |  156 ++++++++++++++++++++++++++++++++++++----
 4 files changed, 160 insertions(+), 17 deletions(-)
arch/x86/Kconfig +2 -1
index 8e3175ba7f4c..9df24a42f54d 100644
@@ -883,11 +883,12 @@ config X86_LOCAL_APIC
 	def_bool y
 	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC || PCI_MSI
 	select GENERIC_IRQ_LEGACY_ALLOC_HWIRQ
+	select IRQ_DOMAIN
+	select IRQ_DOMAIN_HIERARCHY
 
 config X86_IO_APIC
 	def_bool X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC
 	depends on X86_LOCAL_APIC
-	select IRQ_DOMAIN
 
 config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 	bool "Reroute for broken boot IRQs"
arch/x86/include/asm/hw_irq.h +15 -0
index b988ddf7434b..c19ceefeca65 100644
@@ -112,6 +112,15 @@ struct irq_2_irte {
 
 #ifdef	CONFIG_X86_LOCAL_APIC
 struct irq_data;
+struct irq_domain;
+
+struct irq_alloc_info {
+	u32			flags;
+	const struct cpumask	*mask;	/* CPU mask for vector allocation */
+};
+
+/* Request contigious CPU vectors */
+#define	X86_IRQ_ALLOC_CONTIGOUS_VECTORS	0x1
 
 struct irq_cfg {
 	cpumask_var_t		domain;
@@ -135,6 +144,12 @@ struct irq_cfg {
 	};
 };
 
+extern struct irq_domain *x86_vector_domain;
+
+extern void init_irq_alloc_info(struct irq_alloc_info *info,
+				const struct cpumask *mask);
+extern void copy_irq_alloc_info(struct irq_alloc_info *dst,
+				struct irq_alloc_info *src);
 extern struct irq_cfg *irq_cfg(unsigned int irq);
 extern struct irq_cfg *irqd_cfg(struct irq_data *irq_data);
 extern struct irq_cfg *alloc_irq_and_cfg_at(unsigned int at, int node);
arch/x86/kernel/apic/io_apic.c +0 -3
index 3f5f60406ab1..51936be8ab13 100644
@@ -2353,9 +2353,6 @@ static int mp_irqdomain_create(int ioapic)
 		ioapic_dynirq_base = max(ioapic_dynirq_base,
 					 gsi_cfg->gsi_end + 1);
 
-	if (gsi_cfg->gsi_base == 0)
-		irq_set_default_host(ip->irqdomain);
-
 	return 0;
 }
 
arch/x86/kernel/apic/vector.c +143 -13

231 lines not on this page · raw message

Signature · 1 line
1.7.10.4
author
#8 lore raw

PATCH v5 8/31 x86, hpet: Use new irqdomain interfaces to allocate/free IRQ

In reply to Jiang Liu

Use new irqdomain interfaces to allocate/free IRQ for HPET, so we could kill GENERIC_IRQ_LEGACY_ALLOC_HWIRQ later.

---
 arch/x86/kernel/hpet.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
arch/x86/kernel/hpet.c +5 -3
index 319bcb9372fe..24db2d33fab7 100644
@@ -11,6 +11,7 @@
 #include <linux/cpu.h>
 #include <linux/pm.h>
 #include <linux/io.h>
+#include <linux/irqdomain.h>
 
 #include <asm/fixmap.h>
 #include <asm/hpet.h>
@@ -476,7 +477,7 @@ static int hpet_msi_next_event(unsigned long delta,
 static int hpet_setup_msi_irq(unsigned int irq)
 {
 	if (x86_msi.setup_hpet_msi(irq, hpet_blockid)) {
-		irq_free_hwirq(irq);
+		irq_domain_free_irqs(irq, 1);
 		return -EINVAL;
 	}
 	return 0;
@@ -484,9 +485,10 @@ static int hpet_setup_msi_irq(unsigned int irq)
 
 static int hpet_assign_irq(struct hpet_dev *dev)
 {
-	unsigned int irq = irq_alloc_hwirq(-1);
+	int irq;
 
-	if (!irq)
+	irq = irq_domain_alloc_irqs(NULL, 1, NUMA_NO_NODE, NULL);
+	if (irq <= 0)
 		return -EINVAL;
 
 	irq_set_handler_data(irq, dev);
Signature · 1 line
1.7.10.4
author
#9 lore raw

PATCH v5 9/31 x86, MSI: Use new irqdomain interfaces to allocate/free IRQ

In reply to Jiang Liu

Use new irqdomain interfaces to allocate/free IRQ for MSI, so we could kill GENERIC_IRQ_LEGACY_ALLOC_HWIRQ later.

---
 arch/x86/kernel/apic/msi.c |   14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)
arch/x86/kernel/apic/msi.c +6 -8
index 75f4f560f4c2..d5def489ca5b 100644
@@ -14,6 +14,7 @@
 #include <linux/dmar.h>
 #include <linux/hpet.h>
 #include <linux/msi.h>
+#include <linux/irqdomain.h>
 #include <asm/msidef.h>
 #include <asm/hpet.h>
 #include <asm/hw_irq.h>
@@ -146,23 +147,20 @@ int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *msidesc;
-	unsigned int irq;
-	int node, ret;
+	int irq, ret;
 
 	/* Multiple MSI vectors only supported with interrupt remapping */
 	if (type == PCI_CAP_ID_MSI && nvec > 1)
 		return 1;
 
-	node = dev_to_node(&dev->dev);
-
 	list_for_each_entry(msidesc, &dev->msi_list, list) {
-		irq = irq_alloc_hwirq(node);
-		if (!irq)
+		irq = irq_domain_alloc_irqs(NULL, 1, NUMA_NO_NODE, NULL);
+		if (irq <= 0)
 			return -ENOSPC;
 
 		ret = setup_msi_irq(dev, msidesc, irq, 0);
 		if (ret < 0) {
-			irq_free_hwirq(irq);
+			irq_domain_free_irqs(irq, 1);
 			return ret;
 		}
 
@@ -172,7 +170,7 @@ int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 
 void native_teardown_msi_irq(unsigned int irq)
 {
-	irq_free_hwirq(irq);
+	irq_domain_free_irqs(irq, 1);
 }
 
 #ifdef CONFIG_DMAR_TABLE
Signature · 1 line
1.7.10.4
author
#10 lore raw

PATCH v5 10/31 x86, uv: Use new irqdomain interfaces to allocate/free IRQ

In reply to Jiang Liu

Use new irqdomain interfaces to allocate/free IRQ, so we could kill GENERIC_IRQ_LEGACY_ALLOC_HWIRQ later.

---
 arch/x86/platform/uv/uv_irq.c |   27 +++++++++++----------------
 1 file changed, 11 insertions(+), 16 deletions(-)
arch/x86/platform/uv/uv_irq.c +11 -16
index 0ce673645432..474912d03f40 100644
@@ -12,6 +12,7 @@
 #include <linux/rbtree.h>
 #include <linux/slab.h>
 #include <linux/irq.h>
+#include <linux/irqdomain.h>
 
 #include <asm/apic.h>
 #include <asm/uv/uv_irq.h>
@@ -130,24 +131,14 @@ static int
 arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
 		       unsigned long mmr_offset, int limit)
 {
-	const struct cpumask *eligible_cpu = cpumask_of(cpu);
 	struct irq_cfg *cfg = irq_cfg(irq);
 	unsigned long mmr_value;
 	struct uv_IO_APIC_route_entry *entry;
-	int mmr_pnode, err;
-	unsigned int dest;
+	int mmr_pnode;
 
 	BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) !=
 			sizeof(unsigned long));
 
-	err = assign_irq_vector(irq, cfg, eligible_cpu);
-	if (err != 0)
-		return err;
-
-	err = apic->cpu_mask_to_apicid_and(eligible_cpu, eligible_cpu, &dest);
-	if (err != 0)
-		return err;
-
 	if (limit == UV_AFFINITY_CPU)
 		irq_set_status_flags(irq, IRQ_NO_BALANCING);
 	else
@@ -164,7 +155,7 @@ arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
 	entry->polarity		= 0;
 	entry->trigger		= 0;
 	entry->mask		= 0;
-	entry->dest		= dest;
+	entry->dest		= cfg->dest_apicid;
 
 	mmr_pnode = uv_blade_to_pnode(mmr_blade);
 	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
@@ -238,9 +229,13 @@ uv_set_irq_affinity(struct irq_data *data, const struct cpumask *mask,
 int uv_setup_irq(char *irq_name, int cpu, int mmr_blade,
 		 unsigned long mmr_offset, int limit)
 {
-	int ret, irq = irq_alloc_hwirq(uv_blade_to_memory_nid(mmr_blade));
+	int ret, irq;
+	struct irq_alloc_info info;
 
-	if (!irq)
+	init_irq_alloc_info(&info, cpumask_of(cpu));
+	irq = irq_domain_alloc_irqs(NULL, 1, uv_blade_to_memory_nid(mmr_blade),
+				    &info);
+	if (irq <= 0)
 		return -EBUSY;
 
 	ret = arch_enable_uv_irq(irq_name, irq, cpu, mmr_blade, mmr_offset,
@@ -248,7 +243,7 @@ int uv_setup_irq(char *irq_name, int cpu, int mmr_blade,
 	if (ret == irq)
 		uv_set_irq_2_mmr_info(irq, mmr_offset, mmr_blade);
 	else
-		irq_free_hwirq(irq);
+		irq_domain_free_irqs(irq, 1);
 
 	return ret;
 }
@@ -283,6 +278,6 @@ void uv_teardown_irq(unsigned int irq)
 			n = n->rb_right;
 	}
 	spin_unlock_irqrestore(&uv_irq_lock, irqflags);
-	irq_free_hwirq(irq);
+	irq_domain_free_irqs(irq, 1);
 }
 EXPORT_SYMBOL_GPL(uv_teardown_irq);
Signature · 1 line
1.7.10.4
author
#11 lore raw

PATCH v5 11/31 x86, htirq: Use new irqdomain interfaces to allocate/free IRQ

In reply to Jiang Liu

Use new irqdomain interfaces to allocate/free IRQ for HTIRQ, so we could kill GENERIC_IRQ_LEGACY_ALLOC_HWIRQ later.

This patch changes the interfaces between arch independent PCI driver and arch specific code. Currently HT_IRQ is only enabled on x86, so it shouldn't break other architectures.

---
 arch/x86/kernel/apic/htirq.c |   26 +++++++++++++-------------
 drivers/pci/htirq.c          |    7 +++----
 include/linux/htirq.h        |    2 ++
 3 files changed, 18 insertions(+), 17 deletions(-)
arch/x86/kernel/apic/htirq.c +13 -13
index 816f36e979ad..b307ee7a7148 100644
@@ -14,6 +14,7 @@
 #include <linux/device.h>
 #include <linux/pci.h>
 #include <linux/htirq.h>
+#include <linux/irqdomain.h>
 #include <asm/hw_irq.h>
 #include <asm/apic.h>
 #include <asm/hypertransport.h>
@@ -61,31 +62,30 @@ static struct irq_chip ht_irq_chip = {
 	.flags			= IRQCHIP_SKIP_SET_WAKE,
 };
 
+int arch_alloc_ht_irq(struct pci_dev *dev)
+{
+	return irq_domain_alloc_irqs(NULL, 1, dev_to_node(&dev->dev), NULL);
+}
+
+void arch_free_ht_irq(int irq)
+{
+	irq_domain_free_irqs(irq, 1);
+}
+
 int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
 {
 	struct irq_cfg *cfg;
 	struct ht_irq_msg msg;
-	unsigned dest;
-	int err;
 
 	if (disable_apic)
 		return -ENXIO;
 
 	cfg = irq_cfg(irq);
-	err = assign_irq_vector(irq, cfg, apic->target_cpus());
-	if (err)
-		return err;
-
-	err = apic->cpu_mask_to_apicid_and(cfg->domain,
-					   apic->target_cpus(), &dest);
-	if (err)
-		return err;
-
-	msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
+	msg.address_hi = HT_IRQ_HIGH_DEST_ID(cfg->dest_apicid);
 
 	msg.address_lo =
 		HT_IRQ_LOW_BASE |
-		HT_IRQ_LOW_DEST_ID(dest) |
+		HT_IRQ_LOW_DEST_ID(cfg->dest_apicid) |
 		HT_IRQ_LOW_VECTOR(cfg->vector) |
 		((apic->irq_dest_mode == 0) ?
 			HT_IRQ_LOW_DM_PHYSICAL :
drivers/pci/htirq.c +3 -4
index a94dd2c4183a..ceb0ebeb7b5f 100644
@@ -117,8 +117,8 @@ int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update)
 	cfg->msg.address_lo = 0xffffffff;
 	cfg->msg.address_hi = 0xffffffff;
 
-	irq = irq_alloc_hwirq(dev_to_node(&dev->dev));
-	if (!irq) {
+	irq = arch_alloc_ht_irq(dev);
+	if (irq <= 0) {
 		kfree(cfg);
 		return -EBUSY;
 	}
@@ -163,8 +163,7 @@ void ht_destroy_irq(unsigned int irq)
 	cfg = irq_get_handler_data(irq);
 	irq_set_chip(irq, NULL);
 	irq_set_handler_data(irq, NULL);
-	irq_free_hwirq(irq);
-
+	arch_free_ht_irq(irq);
 	kfree(cfg);
 }
 EXPORT_SYMBOL(ht_destroy_irq);
include/linux/htirq.h +2 -0
index 70a1dbbf2093..5caa51b7b95c 100644
@@ -15,6 +15,8 @@ void unmask_ht_irq(struct irq_data *data);
 
 /* The arch hook for getting things started */
 int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev);
+int arch_alloc_ht_irq(struct pci_dev *dev);
+void arch_free_ht_irq(int irq);
 
 /* For drivers of buggy hardware */
 typedef void (ht_irq_update_t)(struct pci_dev *dev, int irq,
Signature · 1 line
1.7.10.4
author
#12 lore raw

PATCH v5 12/31 x86, dmar: Use new irqdomain interfaces to allocate/free IRQ

In reply to Jiang Liu

Use new irqdomain interfaces to allocate/free IRQ for DMAR and interrupt remapping, so we could kill GENERIC_IRQ_LEGACY_ALLOC_HWIRQ later.

The private definition of irq_alloc_hwirqs()/irq_free_hwirqs() are temporary solution, it will be removed once we have converted interrupt remapping driver to use irqdomain framework.

---
 arch/x86/include/asm/irq_remapping.h |    4 ++--
 arch/x86/kernel/apic/msi.c           |   10 ++++++++++
 drivers/iommu/irq_remapping.c        |   17 +++++++++++++++--
 3 files changed, 27 insertions(+), 4 deletions(-)
arch/x86/include/asm/irq_remapping.h +2 -2
index b7747c4c2cf2..230dde9b695e 100644
@@ -103,7 +103,7 @@ static inline bool setup_remapped_irq(int irq,
 }
 #endif /* CONFIG_IRQ_REMAP */
 
-#define dmar_alloc_hwirq()	irq_alloc_hwirq(-1)
-#define dmar_free_hwirq		irq_free_hwirq
+extern int dmar_alloc_hwirq(void);
+extern void dmar_free_hwirq(int irq);
 
 #endif /* __X86_IRQ_REMAPPING_H */
arch/x86/kernel/apic/msi.c +10 -0
index d5def489ca5b..328cf7fbbdc4 100644
@@ -223,6 +223,16 @@ int arch_setup_dmar_msi(unsigned int irq)
 				      "edge");
 	return 0;
 }
+
+int dmar_alloc_hwirq(void)
+{
+	return irq_domain_alloc_irqs(NULL, 1, NUMA_NO_NODE, NULL);
+}
+
+void dmar_free_hwirq(int irq)
+{
+	irq_domain_free_irqs(irq, 1);
+}
 #endif
 
 /*
drivers/iommu/irq_remapping.c +15 -2
index e9fbd68db96e..63886bafed9f 100644
@@ -6,6 +6,7 @@
 #include <linux/msi.h>
 #include <linux/irq.h>
 #include <linux/pci.h>
+#include <linux/irqdomain.h>
 
 #include <asm/hw_irq.h>
 #include <asm/irq_remapping.h>
@@ -50,6 +51,18 @@ static void irq_remapping_disable_io_apic(void)
 		disconnect_bsp_APIC(0);
 }
 
+#ifndef CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ
+static unsigned int irq_alloc_hwirqs(int cnt, int node)
+{
+	return irq_domain_alloc_irqs(NULL, -1, cnt, node, NULL);
+}
+
+static void irq_free_hwirqs(unsigned int from, int cnt)
+{
+	irq_domain_free_irqs(from, cnt);
+}
+#endif
+
 static int do_setup_msi_irqs(struct pci_dev *dev, int nvec)
 {
 	int ret, sub_handle, nvec_pow2, index = 0;
@@ -113,7 +126,7 @@ static int do_setup_msix_irqs(struct pci_dev *dev, int nvec)
 
 	list_for_each_entry(msidesc, &dev->msi_list, list) {
 
-		irq = irq_alloc_hwirq(node);
+		irq = irq_alloc_hwirqs(1, node);
 		if (irq == 0)
 			return -1;
 
@@ -136,7 +149,7 @@ static int do_setup_msix_irqs(struct pci_dev *dev, int nvec)
 	return 0;
 
 error:
-	irq_free_hwirq(irq);
+	irq_free_hwirqs(irq, 1);
 	return ret;
 }
 
Signature · 1 line
1.7.10.4
author
#13 lore raw

PATCH v5 13/31 x86: irq_remapping: Introduce new interfaces to support hierarchy irqdomain

In reply to Jiang Liu

Introduce new interfaces for interrupt remapping drivers to support hierarchy irqdomain:
1) irq_remapping_get_ir_irq_domain(): get irqdomain associated with an interrupt remapping unit. IOAPIC/HPET drivers use this interface to get parent interrupt remapping irqdomain.
2) irq_remapping_get_irq_domain(): get irqdomain for an IRQ allocation. This is mainly used to support MSI irqdomain. We must build one MSI irqdomain for each interrupt remapping unit. MSI driver calls this interface to get MSI irqdomain associated with an IR irqdomain which manages the PCI devices.

Architecture specific needs to implement two hooks:
1) arch_get_ir_parent_domain(): get parent irqdomain for IR irqdomain, which is x86_vector_domain on x86 platforms.
2) arch_create_msi_irq_domain(): create an MSI irqdomain associated with the interrupt remapping unit.

We also add follwing callbacks into struct irq_remap_ops:

	struct irq_domain *(*get_ir_irq_domain)(struct irq_alloc_info *);
	struct irq_domain *(*get_irq_domain)(struct irq_alloc_info *);

Once all clients of IR have been converted to new hierarchy irqdomain interfaces, we will:
1) Remove set_ioapic_entry, set_affinity, free_irq, compose_msi_msg, msi_alloc_irq, msi_setup_irq, setup_hpet_msi from struct remap_osp
2) Kill setup_ioapic_remapped_entry, free_remapped_irq, compose_remapped_msi_msg, setup_hpet_msi_remapped, setup_remapped_irq.
3) Simplify x86_io_apic_ops and x86_msi.

We could achieve a much more clear architecture with all these changes applied.

---
 arch/x86/include/asm/hw_irq.h        |   35 +++++++++++++++++++++++++
 arch/x86/include/asm/irq_remapping.h |   39 +++++++++++++++++++++++++++
 drivers/iommu/irq_remapping.c        |   48 +++++++++++++++++++++++++++++++++-
 drivers/iommu/irq_remapping.h        |   10 +++++++
 4 files changed, 131 insertions(+), 1 deletion(-)
arch/x86/include/asm/hw_irq.h +35 -0
index c19ceefeca65..cf84eac7a394 100644
@@ -113,10 +113,45 @@ struct irq_2_irte {
 #ifdef	CONFIG_X86_LOCAL_APIC
 struct irq_data;
 struct irq_domain;
+struct pci_dev;
+struct msi_desc;
+
+enum irq_alloc_type {
+	X86_IRQ_ALLOC_TYPE_IOAPIC = 1,
+	X86_IRQ_ALLOC_TYPE_HPET,
+	X86_IRQ_ALLOC_TYPE_MSI,
+	X86_IRQ_ALLOC_TYPE_MSIX,
+};
 
 struct irq_alloc_info {
+	enum irq_alloc_type	type;
 	u32			flags;
 	const struct cpumask	*mask;	/* CPU mask for vector allocation */
+	union {
+		int		unused;
+#ifdef	CONFIG_HPET_TIMER
+		struct {
+			int		hpet_id;
+			int		hpet_index;
+			void		*hpet_data;
+		};
+#endif
+#ifdef	CONFIG_PCI_MSI
+		struct {
+			struct pci_dev	*msi_dev;
+			irq_hw_number_t	msi_hwirq;
+		};
+#endif
+#ifdef	CONFIG_X86_IO_APIC
+		struct {
+			int		ioapic_id;
+			int		ioapic_pin;
+			u32		ioapic_trigger : 1;
+			u32		ioapic_polarity : 1;
+			struct IO_APIC_route_entry *ioapic_entry;
+		};
+#endif
+	};
 };
 
 /* Request contigious CPU vectors */
arch/x86/include/asm/irq_remapping.h +39 -0
index 230dde9b695e..d2410ac8cef9 100644
@@ -22,6 +22,8 @@
 #ifndef __X86_IRQ_REMAPPING_H
 #define __X86_IRQ_REMAPPING_H
 
+#include <linux/irqdomain.h>
+#include <asm/hw_irq.h>
 #include <asm/io_apic.h>
 
 struct IO_APIC_route_entry;
@@ -30,6 +32,7 @@ struct irq_chip;
 struct msi_msg;
 struct pci_dev;
 struct irq_cfg;
+struct irq_alloc_info;
 
 #ifdef CONFIG_IRQ_REMAP
 
@@ -58,6 +61,28 @@ extern bool setup_remapped_irq(int irq,
 
 void irq_remap_modify_chip_defaults(struct irq_chip *chip);
 
+extern struct irq_domain *irq_remapping_get_ir_irq_domain(
+				struct irq_alloc_info *info);
+extern struct irq_domain *irq_remapping_get_irq_domain(
+				struct irq_alloc_info *info);
+extern void irq_remapping_print_chip(struct irq_data *data, struct seq_file *p);
+
+/*
+ * Create MSI/MSIx irqdomain for interrupt remapping device, use @parent as
+ * parent irqdomain.
+ */
+static inline struct irq_domain *
+arch_create_msi_irq_domain(struct irq_domain *parent)
+{
+	return NULL;
+}
+
+/* Get parent irqdomain for interrupt remapping irqdomain */
+static inline struct irq_domain *arch_get_ir_parent_domain(void)
+{
+	return x86_vector_domain;
+}
+
 #else  /* CONFIG_IRQ_REMAP */
 
 static inline void setup_irq_remapping_ops(void) { }
@@ -101,6 +126,20 @@ static inline bool setup_remapped_irq(int irq,
 {
 	return false;
 }
+
+static inline struct irq_domain *
+irq_remapping_get_ir_irq_domain(struct irq_alloc_info *info)
+{
+	return NULL;
+}
+
+static inline struct irq_domain *
+irq_remapping_get_irq_domain(struct irq_alloc_info *info)
+{
+	return NULL;
+}
+
+#define	irq_remapping_print_chip	NULL
 #endif /* CONFIG_IRQ_REMAP */
 
 extern int dmar_alloc_hwirq(void);
drivers/iommu/irq_remapping.c +47 -1

63 lines not on this page · raw message

drivers/iommu/irq_remapping.h +10 -0
index fde250f86e60..8c159d6fac46 100644
@@ -30,6 +30,8 @@ struct irq_data;
 struct cpumask;
 struct pci_dev;
 struct msi_msg;
+struct irq_domain;
+struct irq_alloc_info;
 
 extern int disable_irq_remap;
 extern int irq_remap_broken;
@@ -81,11 +83,19 @@ struct irq_remap_ops {
 
 	/* Setup interrupt remapping for an HPET MSI */
 	int (*alloc_hpet_msi)(unsigned int, unsigned int);
+
+	/* Get the irqdomain associated the IOMMU device */
+	struct irq_domain *(*get_ir_irq_domain)(struct irq_alloc_info *);
+
+	/* Get the MSI irqdomain associated with the IOMMU device */
+	struct irq_domain *(*get_irq_domain)(struct irq_alloc_info *);
 };
 
 extern struct irq_remap_ops intel_irq_remap_ops;
 extern struct irq_remap_ops amd_iommu_irq_ops;
 
+extern void ir_ack_apic_edge(struct irq_data *data);
+
 #else  /* CONFIG_IRQ_REMAP */
 
 #define irq_remapping_enabled 0
Signature · 1 line
1.7.10.4
author
#14 lore raw

PATCH v5 14/31 iommu/vt-d: Change prototypes to prepare for enabling hierarchy irqdomain

In reply to Jiang Liu

Prepare for support hierarchy irqdomain by changing function prototypes, should be no function changes.

---
 drivers/iommu/intel_irq_remapping.c |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)
drivers/iommu/intel_irq_remapping.c +11 -11
index fd181cf8a589..5acad492701e 100644
@@ -82,10 +82,10 @@ static int get_irte(int irq, struct irte *entry)
 	return 0;
 }
 
-static int alloc_irte(struct intel_iommu *iommu, int irq, u16 count)
+static int alloc_irte(struct intel_iommu *iommu, int irq,
+		      struct irq_2_iommu *irq_iommu, u16 count)
 {
 	struct ir_table *table = iommu->ir_table;
-	struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
 	struct irq_cfg *cfg = irq_cfg(irq);
 	unsigned int mask = 0;
 	unsigned long flags;
@@ -173,9 +173,9 @@ static int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index, u16 subha
 	return 0;
 }
 
-static int modify_irte(int irq, struct irte *irte_modified)
+static int modify_irte(struct irq_2_iommu *irq_iommu,
+		       struct irte *irte_modified)
 {
-	struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
 	struct intel_iommu *iommu;
 	unsigned long flags;
 	struct irte *irte;
@@ -242,7 +242,7 @@ static int clear_entries(struct irq_2_iommu *irq_iommu)
 		return 0;
 
 	iommu = irq_iommu->iommu;
-	index = irq_iommu->irte_index + irq_iommu->sub_handle;
+	index = irq_iommu->irte_index;
 
 	start = iommu->ir_table->base + index;
 	end = start + (1 << irq_iommu->irte_mask);
@@ -937,7 +937,7 @@ static int intel_setup_ioapic_entry(int irq,
 		pr_warn("No mapping iommu for ioapic %d\n", ioapic_id);
 		index = -ENODEV;
 	} else {
-		index = alloc_irte(iommu, irq, 1);
+		index = alloc_irte(iommu, irq, irq_2_iommu(irq), 1);
 		if (index < 0) {
 			pr_warn("Failed to allocate IRTE for ioapic %d\n",
 				ioapic_id);
@@ -953,7 +953,7 @@ static int intel_setup_ioapic_entry(int irq,
 	/* Set source-id of interrupt request */
 	set_ioapic_sid(&irte, ioapic_id);
 
-	modify_irte(irq, &irte);
+	modify_irte(irq_2_iommu(irq), &irte);
 
 	apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: "
 		"Set IRTE entry (P:%d FPD:%d Dst_Mode:%d "
@@ -1040,7 +1040,7 @@ intel_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
 	 * Atomically updates the IRTE with the new destination, vector
 	 * and flushes the interrupt entry cache.
 	 */
-	modify_irte(irq, &irte);
+	modify_irte(irq_2_iommu(irq), &irte);
 
 	/*
 	 * After this point, all the interrupts will start arriving
@@ -1076,7 +1076,7 @@ static void intel_compose_msi_msg(struct pci_dev *pdev,
 	else
 		set_hpet_sid(&irte, hpet_id);
 
-	modify_irte(irq, &irte);
+	modify_irte(irq_2_iommu(irq), &irte);
 
 	msg->address_hi = MSI_ADDR_BASE_HI;
 	msg->data = sub_handle;
@@ -1103,7 +1103,7 @@ static int intel_msi_alloc_irq(struct pci_dev *dev, int irq, int nvec)
 		       "Unable to map PCI %s to iommu\n", pci_name(dev));
 		index = -ENOENT;
 	} else {
-		index = alloc_irte(iommu, irq, nvec);
+		index = alloc_irte(iommu, irq, irq_2_iommu(irq), nvec);
 		if (index < 0) {
 			printk(KERN_ERR
 			       "Unable to allocate %d IRTE for PCI %s\n",
@@ -1147,7 +1147,7 @@ static int intel_alloc_hpet_msi(unsigned int irq, unsigned int id)
 	down_read(&dmar_global_lock);
 	iommu = map_hpet_to_ir(id);
 	if (iommu) {
-		index = alloc_irte(iommu, irq, 1);
+		index = alloc_irte(iommu, irq, irq_2_iommu(irq), 1);
 		if (index >= 0)
 			ret = 0;
 	}
Signature · 1 line
1.7.10.4
author
#15 lore raw

PATCH v5 15/31 iommu/vt-d: Enhance Intel IR driver to suppport hierarchy irqdomain

In reply to Jiang Liu

Enhance Intel interrupt remapping driver to support hierarchy irqdomain, it will simplify the code eventually. It also implements intel_ir_chip to support stacked irq_chip.

---
 drivers/iommu/intel_irq_remapping.c |  349 +++++++++++++++++++++++++++++++++--
 include/linux/intel-iommu.h         |    4 +
 2 files changed, 335 insertions(+), 18 deletions(-)
drivers/iommu/intel_irq_remapping.c +331 -18
index 5acad492701e..e58b9a594311 100644
@@ -8,6 +8,7 @@
 #include <linux/irq.h>
 #include <linux/intel-iommu.h>
 #include <linux/acpi.h>
+#include <linux/irqdomain.h>
 #include <asm/io_apic.h>
 #include <asm/smp.h>
 #include <asm/cpu.h>
@@ -31,6 +32,14 @@ struct hpet_scope {
 	unsigned int devfn;
 };
 
+struct intel_ir_data {
+	struct irq_2_iommu			irq_2_iommu;
+	struct irte				irte_entry;
+	union {
+		struct msi_msg			msi_entry;
+	};
+};
+
 #define IR_X2APIC_MODE(mode) (mode ? (1 << 11) : 0)
 #define IRTE_DEST(dest) ((x2apic_mode) ? dest : dest << 8)
 
@@ -50,6 +59,7 @@ static int ir_ioapic_num, ir_hpet_num;
  * the dmar_global_lock.
  */
 static DEFINE_RAW_SPINLOCK(irq_2_ir_lock);
+static struct irq_domain_ops intel_ir_domain_ops;
 
 static int __init parse_ioapics_under_ir(void);
 
@@ -263,7 +273,7 @@ static int free_irte(int irq)
 	unsigned long flags;
 	int rc;
 
-	if (!irq_iommu)
+	if (!irq_iommu || irq_iommu->iommu == NULL)
 		return -1;
 
 	raw_spin_lock_irqsave(&irq_2_ir_lock, flags);
@@ -480,36 +490,47 @@ static int intel_setup_irq_remapping(struct intel_iommu *iommu, int mode)
 	struct page *pages;
 	unsigned long *bitmap;
 
-	ir_table = iommu->ir_table = kzalloc(sizeof(struct ir_table),
-					     GFP_ATOMIC);
-
-	if (!iommu->ir_table)
+	ir_table = kzalloc(sizeof(struct ir_table), GFP_ATOMIC);
+	if (!ir_table)
 		return -ENOMEM;
 
 	pages = alloc_pages_node(iommu->node, GFP_ATOMIC | __GFP_ZERO,
 				 INTR_REMAP_PAGE_ORDER);
-
 	if (!pages) {
 		pr_err("IR%d: failed to allocate pages of order %d\n",
 		       iommu->seq_id, INTR_REMAP_PAGE_ORDER);
-		kfree(iommu->ir_table);
-		return -ENOMEM;
+		goto out_free_table;
 	}
 
 	bitmap = kcalloc(BITS_TO_LONGS(INTR_REMAP_TABLE_ENTRIES),
 			 sizeof(long), GFP_ATOMIC);
 	if (bitmap == NULL) {
 		pr_err("IR%d: failed to allocate bitmap\n", iommu->seq_id);
-		__free_pages(pages, INTR_REMAP_PAGE_ORDER);
-		kfree(ir_table);
-		return -ENOMEM;
+		goto out_free_pages;
+	}
+
+	iommu->ir_domain = irq_domain_add_linear(NULL, INTR_REMAP_TABLE_ENTRIES,
+						 &intel_ir_domain_ops, iommu);
+	if (!iommu->ir_domain) {
+		pr_err("IR%d: failed to allocate irqdomain\n", iommu->seq_id);
+		goto out_free_bitmap;
 	}
+	iommu->ir_domain->parent = arch_get_ir_parent_domain();
+	iommu->ir_msi_domain = arch_create_msi_irq_domain(iommu->ir_domain);
 
 	ir_table->base = page_address(pages);
 	ir_table->bitmap = bitmap;
-
+	iommu->ir_table = ir_table;
 	iommu_set_irq_remapping(iommu, mode);
 	return 0;
+
+out_free_bitmap:
+	kfree(bitmap);
+out_free_pages:
+	__free_pages(pages, INTR_REMAP_PAGE_ORDER);
+out_free_table:
+	kfree(ir_table);
+	return -ENOMEM;
 }
 
 /*
@@ -1013,12 +1034,6 @@ intel_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
 	struct irte irte;
 	int err;
 
-	if (!config_enabled(CONFIG_SMP))
-		return -EINVAL;
-
-	if (!cpumask_intersects(mask, cpu_online_mask))
-		return -EINVAL;
-
 	if (get_irte(irq, &irte))
 		return -EBUSY;
 
@@ -1051,6 +1066,7 @@ intel_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
 		send_cleanup_vector(cfg);
 
 	cpumask_copy(data->affinity, mask);
+
 	return 0;
 }
 
@@ -1156,6 +1172,53 @@ static int intel_alloc_hpet_msi(unsigned int irq, unsigned int id)
 	return ret;
 }
 
+static struct irq_domain *intel_get_ir_irq_domain(struct irq_alloc_info *info)
+{
+	struct intel_iommu *iommu = NULL;
+
+	if (!info)
+		return NULL;
+
+	switch (info->type) {
+	case X86_IRQ_ALLOC_TYPE_IOAPIC:
+		iommu = map_ioapic_to_ir(info->ioapic_id);
+		break;
+	case X86_IRQ_ALLOC_TYPE_HPET:
+		iommu = map_hpet_to_ir(info->hpet_id);
+		break;
+	case X86_IRQ_ALLOC_TYPE_MSI:
+	case X86_IRQ_ALLOC_TYPE_MSIX:
+		iommu = map_dev_to_ir(info->msi_dev);
+		break;
+	default:
+		BUG_ON(1);
+		break;
+	}
+
+	return iommu ? iommu->ir_domain : NULL;
+}
+
+static struct irq_domain *intel_get_irq_domain(struct irq_alloc_info *info)
+{
+	struct intel_iommu *iommu;
+
+	if (!info)
+		return NULL;
+
+	switch (info->type) {
+	case X86_IRQ_ALLOC_TYPE_MSI:
+	case X86_IRQ_ALLOC_TYPE_MSIX:
+		iommu = map_dev_to_ir(info->msi_dev);
+		if (iommu)
+			return iommu->ir_msi_domain;
+		break;
+	default:
+		break;
+	}
+
+	return NULL;
+}
+
 struct irq_remap_ops intel_irq_remap_ops = {
 	.supported		= intel_irq_remapping_supported,
 	.prepare		= dmar_table_init,
@@ -1170,4 +1233,254 @@ struct irq_remap_ops intel_irq_remap_ops = {
 	.msi_alloc_irq		= intel_msi_alloc_irq,
 	.msi_setup_irq		= intel_msi_setup_irq,
 	.alloc_hpet_msi		= intel_alloc_hpet_msi,
+	.get_ir_irq_domain	= intel_get_ir_irq_domain,
+	.get_irq_domain		= intel_get_irq_domain,
+};
+
+/*
+ * Migrate the IO-APIC irq in the presence of intr-remapping.
+ *
+ * For both level and edge triggered, irq migration is a simple atomic
+ * update(of vector and cpu destination) of IRTE and flush the hardware cache.
+ *
+ * For level triggered, we eliminate the io-apic RTE modification (with the
+ * updated vector information), by using a virtual vector (io-apic pin number).
+ * Real vector that is used for interrupting cpu will be coming from
+ * the interrupt-remapping table entry.
+ *
+ * As the migration is a simple atomic update of IRTE, the same mechanism
+ * is used to migrate MSI irq's in the presence of interrupt-remapping.
+ */
+static int
+intel_ir_set_affinity(struct irq_data *data, const struct cpumask *mask,
+		      bool force)
+{
+	struct intel_ir_data *ir_data = data->chip_data;
+	struct irte *irte = &ir_data->irte_entry;
+	struct irq_cfg *cfg = irqd_cfg(data);
+	struct irq_data *parent = data->parent_data;
+	int ret;
+
+	ret = parent->chip->irq_set_affinity(parent, mask, force);
+	if (ret < 0 || ret == IRQ_SET_MASK_OK_DONE)
+		return ret;
+
+	/*
+	 * Atomically updates the IRTE with the new destination, vector
+	 * and flushes the interrupt entry cache.
+	 */
+	irte->vector = cfg->vector;
+	irte->dest_id = IRTE_DEST(cfg->dest_apicid);
+	modify_irte(&ir_data->irq_2_iommu, irte);
+
+	/*
+	 * After this point, all the interrupts will start arriving
+	 * at the new destination. So, time to cleanup the previous
+	 * vector allocation.
+	 */
+	if (cfg->move_in_progress)
+		send_cleanup_vector(cfg);
+
+	return IRQ_SET_MASK_OK_DONE;
+}
+
+static void intel_ir_compose_msi_msg(struct irq_data *irq_data,
+				     struct msi_msg *msg)
+{
+	struct intel_ir_data *ir_data = irq_data->chip_data;
+
+	*msg = ir_data->msi_entry;
+}
+
+static struct irq_chip intel_ir_chip = {
+	.irq_ack = ir_ack_apic_edge,
+	.irq_set_affinity = intel_ir_set_affinity,
+	.irq_compose_msi_msg = intel_ir_compose_msi_msg,
+};
+
+static void intel_irq_remapping_prepare_irte(struct intel_ir_data *data,
+					     struct irq_cfg *irq_cfg,
+					     struct irq_alloc_info *info,
+					     int index, int sub_handle)
+{
+	struct IR_IO_APIC_route_entry *entry;
+	struct irte *irte = &data->irte_entry;
+	struct msi_msg *msg = &data->msi_entry;
+
+	prepare_irte(irte, irq_cfg->vector, irq_cfg->dest_apicid);
+	switch (info->type) {
+	case X86_IRQ_ALLOC_TYPE_IOAPIC:
+		/* Set source-id of interrupt request */
+		set_ioapic_sid(irte, info->ioapic_id);
+		apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: Set IRTE entry (P:%d FPD:%d Dst_Mode:%d Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X Avail:%X Vector:%02X Dest:%08X SID:%04X SQ:%X SVT:%X)\n",
+			info->ioapic_id, irte->present, irte->fpd,
+			irte->dst_mode, irte->redir_hint,
+			irte->trigger_mode, irte->dlvry_mode,
+			irte->avail, irte->vector, irte->dest_id,
+			irte->sid, irte->sq, irte->svt);
+
+		entry = (struct IR_IO_APIC_route_entry *)info->ioapic_entry;
+		info->ioapic_entry = NULL;
+		memset(entry, 0, sizeof(*entry));
+		entry->index2	= (index >> 15) & 0x1;
+		entry->zero	= 0;
+		entry->format	= 1;
+		entry->index	= (index & 0x7fff);
+		/*
+		 * IO-APIC RTE will be configured with virtual vector.
+		 * irq handler will do the explicit EOI to the io-apic.
+		 */
+		entry->vector	= info->ioapic_pin;
+		entry->mask	= 0;			/* enable IRQ */
+		entry->trigger	= info->ioapic_trigger;
+		entry->polarity	= info->ioapic_polarity;
+		if (info->ioapic_trigger)
+			entry->mask = 1; /* Mask level triggered irqs. */
+		break;
+
+	case X86_IRQ_ALLOC_TYPE_HPET:
+	case X86_IRQ_ALLOC_TYPE_MSI:
+	case X86_IRQ_ALLOC_TYPE_MSIX:
+		if (info->type == X86_IRQ_ALLOC_TYPE_HPET)
+			set_hpet_sid(irte, info->hpet_id);
+		else
+			set_msi_sid(irte, info->msi_dev);
+
+		msg->address_hi = MSI_ADDR_BASE_HI;
+		msg->data = sub_handle;
+		msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
+				  MSI_ADDR_IR_SHV |
+				  MSI_ADDR_IR_INDEX1(index) |
+				  MSI_ADDR_IR_INDEX2(index);
+		break;
+
+	default:
+		BUG_ON(1);
+		break;
+	}
+}
+
+static void intel_free_irq_resources(struct irq_domain *domain,
+				     unsigned int virq, unsigned int nr_irqs)
+{
+	struct irq_data *irq_data;
+	struct intel_ir_data *data;
+	struct irq_2_iommu *irq_iommu;
+	unsigned long flags;
+	int i;
+
+	for (i = 0; i < nr_irqs; i++) {
+		irq_data = irq_domain_get_irq_data(domain, virq  + i);
+		if (irq_data && irq_data->chip_data) {
+			data = irq_data->chip_data;
+			irq_iommu = &data->irq_2_iommu;
+			raw_spin_lock_irqsave(&irq_2_ir_lock, flags);
+			clear_entries(irq_iommu);
+			raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags);
+			irq_domain_reset_irq_data(irq_data);
+			kfree(data);
+		}
+	}
+}
+
+static int intel_irq_remapping_alloc(struct irq_domain *domain,
+				     unsigned int virq, unsigned int nr_irqs,
+				     void *arg)
+{
+	struct intel_iommu *iommu = domain->host_data;
+	struct irq_alloc_info *info = arg;
+	struct intel_ir_data *data;
+	struct irq_data *irq_data;
+	struct irq_cfg *irq_cfg;
+	int i, ret, index;
+
+	if (!info || !iommu)
+		return -EINVAL;
+	if (nr_irqs > 1 && info->type != X86_IRQ_ALLOC_TYPE_MSI &&
+	    info->type != X86_IRQ_ALLOC_TYPE_MSIX)
+		return -EINVAL;
+
+	/*
+	 * With IRQ remapping enabled, don't need contigious CPU vectors
+	 * to support multiple MSI interrupts.
+	 */
+	if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+		info->flags &= ~X86_IRQ_ALLOC_CONTIGOUS_VECTORS;
+
+	ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
+	if (ret < 0)
+		return ret;
+
+	ret = -ENOMEM;
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		goto out_free_parent;
+
+	down_read(&dmar_global_lock);
+	index = alloc_irte(iommu, virq, &data->irq_2_iommu, nr_irqs);
+	up_read(&dmar_global_lock);
+	if (index < 0) {
+		pr_warn("Failed to allocate IRTE\n");
+		kfree(data);
+		goto out_free_parent;
+	}
+
+	for (i = 0; i < nr_irqs; i++) {
+		irq_data = irq_domain_get_irq_data(domain, virq + i);
+		irq_cfg = irqd_cfg(irq_data);
+		if (!irq_data || !irq_cfg) {
+			ret = -EINVAL;
+			goto out_free_data;
+		}
+
+		if (i > 0) {
+			data = kzalloc(sizeof(*data), GFP_KERNEL);
+			if (!data)
+				goto out_free_data;
+		}
+		irq_data->hwirq = (index << 16) + i;
+		irq_data->chip_data = data;
+		irq_data->chip = &intel_ir_chip;
+		intel_irq_remapping_prepare_irte(data, irq_cfg, info, index, i);
+		irq_set_status_flags(virq + i, IRQ_MOVE_PCNTXT);
+	}
+	return 0;
+
+out_free_data:
+	intel_free_irq_resources(domain, virq, i);
+out_free_parent:
+	irq_domain_free_irqs_common(domain, virq, nr_irqs);
+	return ret;
+}
+
+static void intel_irq_remapping_free(struct irq_domain *domain,
+				     unsigned int virq, unsigned int nr_irqs)
+{
+	intel_free_irq_resources(domain, virq, nr_irqs);
+	irq_domain_free_irqs_common(domain, virq, nr_irqs);
+}
+
+static void intel_irq_remapping_activate(struct irq_domain *domain,
+					 struct irq_data *irq_data)
+{
+	struct intel_ir_data *data = irq_data->chip_data;
+
+	modify_irte(&data->irq_2_iommu, &data->irte_entry);
+}
+
+static void intel_irq_remapping_deactivate(struct irq_domain *domain,
+					   struct irq_data *irq_data)
+{
+	struct intel_ir_data *data = irq_data->chip_data;
+	struct irte entry;
+
+	memset(&entry, 0, sizeof(entry));
+	modify_irte(&data->irq_2_iommu, &entry);
+}
+
+static struct irq_domain_ops intel_ir_domain_ops = {
+	.alloc = intel_irq_remapping_alloc,
+	.free = intel_irq_remapping_free,
+	.activate = intel_irq_remapping_activate,
+	.deactivate = intel_irq_remapping_deactivate,
 };
include/linux/intel-iommu.h +4 -0
index a65208a8fe18..ecaf3a937845 100644
@@ -286,6 +286,8 @@ struct q_inval {
 
 #define INTR_REMAP_TABLE_ENTRIES	65536
 
+struct irq_domain;
+
 struct ir_table {
 	struct irte *base;
 	unsigned long *bitmap;
@@ -335,6 +337,8 @@ struct intel_iommu {
 
 #ifdef CONFIG_IRQ_REMAP
 	struct ir_table *ir_table;	/* Interrupt remapping info */
+	struct irq_domain *ir_domain;
+	struct irq_domain *ir_msi_domain;
 #endif
 	struct device	*iommu_dev; /* IOMMU-sysfs device */
 	int		node;
Signature · 1 line
1.7.10.4
author
#16 lore raw

PATCH v5 16/31 iommu/amd: Enhance AMD IR driver to suppport hierarchy irqdomain

In reply to Jiang Liu

Enhance AMD interrupt remapping driver to support hierarchy irqdomain, it will simplify the code eventually.

---
 drivers/iommu/amd_iommu.c       |  329 ++++++++++++++++++++++++++++++++++++++-
 drivers/iommu/amd_iommu_init.c  |    4 +
 drivers/iommu/amd_iommu_proto.h |    9 ++
 drivers/iommu/amd_iommu_types.h |    5 +
 4 files changed, 341 insertions(+), 6 deletions(-)
drivers/iommu/amd_iommu.c +323 -6
index 6fda7cc789eb..53265d70f0b4 100644
@@ -33,6 +33,7 @@
 #include <linux/export.h>
 #include <linux/irq.h>
 #include <linux/msi.h>
+#include <linux/irqdomain.h>
 #include <asm/irq_remapping.h>
 #include <asm/io_apic.h>
 #include <asm/apic.h>
@@ -3854,6 +3855,16 @@ union irte {
 	} fields;
 };
 
+struct amd_ir_data {
+	struct irq_2_irte			irq_2_irte;
+	union irte				irte_entry;
+	union {
+		struct msi_msg			msi_entry;
+	};
+};
+
+static struct irq_chip amd_ir_chip;
+
 #define DTE_IRQ_PHYS_ADDR_MASK	(((1ULL << 45)-1) << 6)
 #define DTE_IRQ_REMAP_INTCTL    (2ULL << 60)
 #define DTE_IRQ_TABLE_LEN       (8ULL << 1)
@@ -3947,7 +3958,8 @@ out_unlock:
 	return table;
 }
 
-static int alloc_irq_index(struct irq_cfg *cfg, u16 devid, int count)
+static int alloc_irq_index(struct irq_cfg *cfg, struct irq_2_irte *irte_info,
+			   u16 devid, int count)
 {
 	struct irq_remap_table *table;
 	unsigned long flags;
@@ -3969,15 +3981,12 @@ static int alloc_irq_index(struct irq_cfg *cfg, u16 devid, int count)
 			c = 0;
 
 		if (c == count)	{
-			struct irq_2_irte *irte_info;
-
 			for (; c != 0; --c)
 				table->table[index - c + 1] = IRTE_ALLOCATED;
 
 			index -= count - 1;
 
 			cfg->remapped	      = 1;
-			irte_info             = &cfg->irq_2_irte;
 			irte_info->devid      = devid;
 			irte_info->index      = index;
 
@@ -4222,7 +4231,7 @@ static int msi_alloc_irq(struct pci_dev *pdev, int irq, int nvec)
 		return -EINVAL;
 
 	devid = get_device_id(&pdev->dev);
-	index = alloc_irq_index(cfg, devid, nvec);
+	index = alloc_irq_index(cfg, &cfg->irq_2_irte, devid, nvec);
 
 	return index < 0 ? MAX_IRQS_PER_TABLE : index;
 }
@@ -4269,7 +4278,7 @@ static int alloc_hpet_msi(unsigned int irq, unsigned int id)
 	if (devid < 0)
 		return devid;
 
-	index = alloc_irq_index(cfg, devid, 1);
+	index = alloc_irq_index(cfg, &cfg->irq_2_irte, devid, 1);
 	if (index < 0)
 		return index;
 
@@ -4280,6 +4289,72 @@ static int alloc_hpet_msi(unsigned int irq, unsigned int id)
 	return 0;
 }
 
+static int get_devid(struct irq_alloc_info *info)
+{
+	int devid = -1;
+
+	switch (info->type) {
+	case X86_IRQ_ALLOC_TYPE_IOAPIC:
+		devid     = get_ioapic_devid(info->ioapic_id);
+		break;
+	case X86_IRQ_ALLOC_TYPE_HPET:
+		devid     = get_hpet_devid(info->hpet_id);
+		break;
+	case X86_IRQ_ALLOC_TYPE_MSI:
+	case X86_IRQ_ALLOC_TYPE_MSIX:
+		devid = get_device_id(&info->msi_dev->dev);
+		break;
+	default:
+		BUG_ON(1);
+		break;
+	}
+
+	return devid;
+}
+
+static struct irq_domain *get_ir_irq_domain(struct irq_alloc_info *info)
+{
+	int devid;
+	struct amd_iommu *iommu;
+
+	if (!info)
+		return NULL;
+
+	devid = get_devid(info);
+	if (devid >= 0) {
+		iommu = amd_iommu_rlookup_table[devid];
+		if (iommu)
+			return iommu->ir_domain;
+	}
+
+	return NULL;
+}
+
+static struct irq_domain *get_irq_domain(struct irq_alloc_info *info)
+{
+	int devid;
+	struct amd_iommu *iommu;
+
+	if (!info)
+		return NULL;
+
+	switch (info->type) {
+	case X86_IRQ_ALLOC_TYPE_MSI:
+	case X86_IRQ_ALLOC_TYPE_MSIX:
+		devid = get_device_id(&info->msi_dev->dev);
+		if (devid >= 0) {
+			iommu = amd_iommu_rlookup_table[devid];
+			if (iommu)
+				return iommu->msi_domain;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return NULL;
+}
+
 struct irq_remap_ops amd_iommu_irq_ops = {
 	.supported		= amd_iommu_supported,
 	.prepare		= amd_iommu_prepare,
@@ -4294,5 +4369,247 @@ struct irq_remap_ops amd_iommu_irq_ops = {
 	.msi_alloc_irq		= msi_alloc_irq,
 	.msi_setup_irq		= msi_setup_irq,
 	.alloc_hpet_msi		= alloc_hpet_msi,
+	.get_ir_irq_domain	= get_ir_irq_domain,
+	.get_irq_domain		= get_irq_domain,
+};
+
+static void irq_remapping_prepare_irte(struct amd_ir_data *data,
+				       struct irq_cfg *irq_cfg,
+				       struct irq_alloc_info *info,
+				       int devid, int index, int sub_handle)
+{
+	union irte *irte = &data->irte_entry;
+	struct irq_2_irte *irte_info = &data->irq_2_irte;
+	struct msi_msg *msg = &data->msi_entry;
+	struct IO_APIC_route_entry *entry;
+
+	irq_cfg->remapped = 1;
+	data->irq_2_irte.devid = devid;
+	data->irq_2_irte.index = index + sub_handle;
+
+	/* Setup IRTE for IOMMU */
+	irte->val = 0;
+	irte->fields.vector      = irq_cfg->vector;
+	irte->fields.int_type    = apic->irq_delivery_mode;
+	irte->fields.destination = irq_cfg->dest_apicid;
+	irte->fields.dm          = apic->irq_dest_mode;
+	irte->fields.valid       = 1;
+
+	switch (info->type) {
+	case X86_IRQ_ALLOC_TYPE_IOAPIC:
+		/* Setup IOAPIC entry */
+		entry = info->ioapic_entry;
+		info->ioapic_entry = NULL;
+		memset(entry, 0, sizeof(*entry));
+		entry->vector        = index;
+		entry->mask          = 0;
+		entry->trigger       = info->ioapic_trigger;
+		entry->polarity      = info->ioapic_polarity;
+		/* Mask level triggered irqs. */
+		if (info->ioapic_trigger)
+			entry->mask = 1;
+		break;
+
+	case X86_IRQ_ALLOC_TYPE_HPET:
+	case X86_IRQ_ALLOC_TYPE_MSI:
+	case X86_IRQ_ALLOC_TYPE_MSIX:
+		msg->address_hi = MSI_ADDR_BASE_HI;
+		msg->address_lo = MSI_ADDR_BASE_LO;
+		msg->data = irte_info->index;
+		break;
+
+	default:
+		BUG_ON(1);
+		break;
+	}
+}
+
+static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
+			       unsigned int nr_irqs, void *arg)
+{
+	struct irq_alloc_info *info = arg;
+	struct amd_ir_data *data;
+	struct irq_data *irq_data;
+	struct irq_cfg *cfg;
+	int i, ret, devid;
+	int index = -1;
+
+	if (!info)
+		return -EINVAL;
+	if (nr_irqs > 1 && info->type != X86_IRQ_ALLOC_TYPE_MSI &&
+	    info->type != X86_IRQ_ALLOC_TYPE_MSIX)
+		return -EINVAL;
+
+	/*
+	 * With IRQ remapping enabled, don't need contigious CPU vectors
+	 * to support multiple MSI interrupts.
+	 */
+	if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+		info->flags &= ~X86_IRQ_ALLOC_CONTIGOUS_VECTORS;
+
+	devid = get_devid(info);
+	if (devid < 0)
+		return -EINVAL;
+
+	ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
+	if (ret < 0)
+		return ret;
+
+	ret = -ENOMEM;
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		goto out_free_parent;
+
+	if (info->type == X86_IRQ_ALLOC_TYPE_IOAPIC) {
+		if (get_irq_table(devid, true))
+			index = info->ioapic_pin;
+		else
+			ret = -ENOMEM;
+	} else {
+		cfg = irq_cfg(virq);
+		index = alloc_irq_index(cfg, &data->irq_2_irte, devid, nr_irqs);
+	}
+	if (index < 0) {
+		pr_warn("Failed to allocate IRTE\n");
+		kfree(data);
+		goto out_free_parent;
+	}
+
+	for (i = 0; i < nr_irqs; i++) {
+		irq_data = irq_domain_get_irq_data(domain, virq + i);
+		cfg = irqd_cfg(irq_data);
+		if (!irq_data || !cfg) {
+			ret = -EINVAL;
+			goto out_free_data;
+		}
+
+		if (i > 0) {
+			data = kzalloc(sizeof(*data), GFP_KERNEL);
+			if (!data)
+				goto out_free_data;
+		}
+		irq_data->hwirq = (devid << 16) + i;
+		irq_data->chip_data = data;
+		irq_data->chip = &amd_ir_chip;
+		irq_remapping_prepare_irte(data, cfg, info, devid, index, i);
+		irq_set_status_flags(virq + i, IRQ_MOVE_PCNTXT);
+	}
+	return 0;
+
+out_free_data:
+	for (i--; i >= 0; i--) {
+		irq_data = irq_domain_get_irq_data(domain, virq + i);
+		if (irq_data->chip_data)
+			kfree(irq_data->chip_data);
+	}
+	for (i = 0; i < nr_irqs; i++)
+		free_irte(devid, index + i);
+out_free_parent:
+	irq_domain_free_irqs_common(domain, virq, nr_irqs);
+	return ret;
+}
+
+static void irq_remapping_free(struct irq_domain *domain, unsigned int virq,
+			       unsigned int nr_irqs)
+{
+	struct irq_data *irq_data;
+	struct amd_ir_data *data;
+	struct irq_2_irte *irte_info;
+	int i;
+
+	for (i = 0; i < nr_irqs; i++) {
+		irq_data = irq_domain_get_irq_data(domain, virq  + i);
+		if (irq_data && irq_data->chip_data) {
+			data = irq_data->chip_data;
+			irte_info = &data->irq_2_irte;
+			free_irte(irte_info->devid, irte_info->index);
+			kfree(data);
+		}
+	}
+	irq_domain_free_irqs_common(domain, virq, nr_irqs);
+}
+
+static void irq_remapping_activate(struct irq_domain *domain,
+				   struct irq_data *irq_data)
+{
+	struct amd_ir_data *data = irq_data->chip_data;
+	struct irq_2_irte *irte_info = &data->irq_2_irte;
+
+	modify_irte(irte_info->devid, irte_info->index, data->irte_entry);
+}
+
+static void irq_remapping_deactivate(struct irq_domain *domain,
+				     struct irq_data *irq_data)
+{
+	struct amd_ir_data *data = irq_data->chip_data;
+	struct irq_2_irte *irte_info = &data->irq_2_irte;
+	union irte entry;
+
+	entry.val = 0;
+	modify_irte(irte_info->devid, irte_info->index, data->irte_entry);
+}
+
+static struct irq_domain_ops amd_ir_domain_ops = {
+	.alloc = irq_remapping_alloc,
+	.free = irq_remapping_free,
+	.activate = irq_remapping_activate,
+	.deactivate = irq_remapping_deactivate,
 };
+
+static int amd_ir_set_affinity(struct irq_data *data,
+			       const struct cpumask *mask, bool force)
+{
+	struct amd_ir_data *ir_data = data->chip_data;
+	struct irq_2_irte *irte_info = &ir_data->irq_2_irte;
+	struct irq_cfg *cfg = irqd_cfg(data);
+	struct irq_data *parent = data->parent_data;
+	int ret;
+
+	ret = parent->chip->irq_set_affinity(parent, mask, force);
+	if (ret < 0 || ret == IRQ_SET_MASK_OK_DONE)
+		return ret;
+
+	/*
+	 * Atomically updates the IRTE with the new destination, vector
+	 * and flushes the interrupt entry cache.
+	 */
+	ir_data->irte_entry.fields.vector = cfg->vector;
+	ir_data->irte_entry.fields.destination = cfg->dest_apicid;
+	modify_irte(irte_info->devid, irte_info->index, ir_data->irte_entry);
+
+	/*
+	 * After this point, all the interrupts will start arriving
+	 * at the new destination. So, time to cleanup the previous
+	 * vector allocation.
+	 */
+	if (cfg->move_in_progress)
+		send_cleanup_vector(cfg);
+
+	return IRQ_SET_MASK_OK_DONE;
+}
+
+static void ir_compose_msi_msg(struct irq_data *irq_data, struct msi_msg *msg)
+{
+	struct amd_ir_data *ir_data = irq_data->chip_data;
+
+	*msg = ir_data->msi_entry;
+}
+
+static struct irq_chip amd_ir_chip = {
+	.irq_ack = ir_ack_apic_edge,
+	.irq_set_affinity = amd_ir_set_affinity,
+	.irq_compose_msi_msg = ir_compose_msi_msg,
+};
+
+int amd_iommu_create_irq_domain(struct amd_iommu *iommu)
+{
+	iommu->ir_domain = irq_domain_add_tree(NULL, &amd_ir_domain_ops, iommu);
+	if (!iommu->ir_domain)
+		return -ENOMEM;
+
+	iommu->ir_domain->parent = arch_get_ir_parent_domain();
+	iommu->msi_domain = arch_create_msi_irq_domain(iommu->ir_domain);
+
+	return 0;
+}
 #endif
drivers/iommu/amd_iommu_init.c +4 -0
index b0522f15730f..de3390a7d345 100644
@@ -1124,6 +1124,10 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
 	if (ret)
 		return ret;
 
+	ret = amd_iommu_create_irq_domain(iommu);
+	if (ret)
+		return ret;
+
 	/*
 	 * Make sure IOMMU is not considered to translate itself. The IVRS
 	 * table tells us so, but this is a lie!
drivers/iommu/amd_iommu_proto.h +9 -0
index 95ed6deae47f..612a22192fa0 100644
@@ -63,6 +63,15 @@ extern u8 amd_iommu_pc_get_max_counters(u16 devid);
 extern int amd_iommu_pc_get_set_reg_val(u16 devid, u8 bank, u8 cntr, u8 fxn,
 				    u64 *value, bool is_write);
 
+#ifdef CONFIG_IRQ_REMAP
+extern int amd_iommu_create_irq_domain(struct amd_iommu *iommu);
+#else
+static inline int amd_iommu_create_irq_domain(struct amd_iommu *iommu)
+{
+	return 0;
+}
+#endif
+
 #define PPR_SUCCESS			0x0
 #define PPR_INVALID			0x1
 #define PPR_FAILURE			0xf
drivers/iommu/amd_iommu_types.h +5 -0
index cec51a8ba844..ef12d74a03fe 100644
@@ -392,6 +392,7 @@ struct amd_iommu_fault {
 
 
 struct iommu_domain;
+struct irq_domain;
 
 /*
  * This structure contains generic data for  IOMMU protection domains
@@ -574,6 +575,10 @@ struct amd_iommu {
 	/* The maximum PC banks and counters/bank (PCSup=1) */
 	u8 max_banks;
 	u8 max_counters;
+#ifdef CONFIG_IRQ_REMAP
+	struct irq_domain *ir_domain;
+	struct irq_domain *msi_domain;
+#endif
 };
 
 struct devid_map {
Signature · 1 line
1.7.10.4
author
#17 lore raw

PATCH v5 17/31 x86, hpet: Enhance HPET IRQ to support hierarchy irqdomain

In reply to Jiang Liu

Enhance HPET code to support hierarchy irqdomain, it helps to make the architecture more clear.

---
 arch/x86/include/asm/hpet.h |    7 +-
 arch/x86/kernel/apic/msi.c  |  166 ++++++++++++++++++++++++++++++++++++++-----
 arch/x86/kernel/hpet.c      |   57 ++++-----------
 3 files changed, 169 insertions(+), 61 deletions(-)
arch/x86/include/asm/hpet.h +6 -1
index 36f7125945e3..e87e9faf87a9 100644
@@ -74,11 +74,16 @@ extern unsigned int hpet_readl(unsigned int a);
 extern void force_hpet_resume(void);
 
 struct irq_data;
+struct hpet_dev;
+struct irq_domain;
+
 extern void hpet_msi_unmask(struct irq_data *data);
 extern void hpet_msi_mask(struct irq_data *data);
-struct hpet_dev;
 extern void hpet_msi_write(struct hpet_dev *hdev, struct msi_msg *msg);
 extern void hpet_msi_read(struct hpet_dev *hdev, struct msi_msg *msg);
+extern struct irq_domain *hpet_create_irq_domain(int hpet_id);
+extern int hpet_assign_irq(struct irq_domain *domain,
+			   struct hpet_dev *dev, int dev_num);
 
 #ifdef CONFIG_PCI_MSI
 extern int default_setup_hpet_msi(unsigned int irq, unsigned int id);
arch/x86/kernel/apic/msi.c +149 -17

197 lines not on this page · raw message

arch/x86/kernel/hpet.c +14 -43

114 lines not on this page · raw message

Signature · 1 line
1.7.10.4
author
#18 lore raw

PATCH v5 18/31 PCI/MSI: Remove unnecessary braces around single statements

In reply to Jiang Liu

Per Documentation/CodingStyle, don't use braces around single statements.

---
 drivers/pci/msi.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/pci/msi.c +3 -6
index 9fab30af0e75..fb2ccb536324 100644
@@ -244,9 +244,8 @@ void default_restore_msi_irqs(struct pci_dev *dev)
 {
 	struct msi_desc *entry;
 
-	list_for_each_entry(entry, &dev->msi_list, list) {
+	list_for_each_entry(entry, &dev->msi_list, list)
 		default_restore_msi_irq(dev, entry->irq);
-	}
 }
 
 void __read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
@@ -451,9 +450,8 @@ static void __pci_restore_msix_state(struct pci_dev *dev)
 				PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL);
 
 	arch_restore_msi_irqs(dev);
-	list_for_each_entry(entry, &dev->msi_list, list) {
+	list_for_each_entry(entry, &dev->msi_list, list)
 		msix_mask_irq(entry, entry->masked);
-	}
 
 	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL, 0);
 }
@@ -497,9 +495,8 @@ static int populate_msi_sysfs(struct pci_dev *pdev)
 	int count = 0;
 
 	/* Determine how many msi entries we have */
-	list_for_each_entry(entry, &pdev->msi_list, list) {
+	list_for_each_entry(entry, &pdev->msi_list, list)
 		++num_msi;
-	}
 	if (!num_msi)
 		return 0;
 
Signature · 1 line
1.7.10.4
author
#19 lore raw

PATCH v5 19/31 PCI/MSI: Simplify PCI MSI code by initializing msi_desc.nvec_used earlier

In reply to Jiang Liu

Simplify PCI MSI code by initializing msi_desc.nvec_used and msi_desc.msi_attrib.multiple when creating MSI descriptors.

Also remove redundant checks in IRQ remapping drivers, PCI MSI core already guarantees these.

---
 drivers/iommu/irq_remapping.c |    8 --------
 drivers/pci/msi.c             |   40 +++++++++++++++-------------------------
 2 files changed, 15 insertions(+), 33 deletions(-)
drivers/iommu/irq_remapping.c +0 -8
index 176ff4372b7d..32fe5b1322d0 100644
@@ -69,19 +69,13 @@ static int do_setup_msi_irqs(struct pci_dev *dev, int nvec)
 	unsigned int irq;
 	struct msi_desc *msidesc;
 
-	WARN_ON(!list_is_singular(&dev->msi_list));
 	msidesc = list_entry(dev->msi_list.next, struct msi_desc, list);
-	WARN_ON(msidesc->irq);
-	WARN_ON(msidesc->msi_attrib.multiple);
-	WARN_ON(msidesc->nvec_used);
 
 	irq = irq_alloc_hwirqs(nvec, dev_to_node(&dev->dev));
 	if (irq == 0)
 		return -ENOSPC;
 
 	nvec_pow2 = __roundup_pow_of_two(nvec);
-	msidesc->nvec_used = nvec;
-	msidesc->msi_attrib.multiple = ilog2(nvec_pow2);
 	for (sub_handle = 0; sub_handle < nvec; sub_handle++) {
 		if (!sub_handle) {
 			index = msi_alloc_remapped_irq(dev, irq, nvec_pow2);
@@ -109,8 +103,6 @@ error:
 	 * IRQs from tearing down again in default_teardown_msi_irqs()
 	 */
 	msidesc->irq = 0;
-	msidesc->nvec_used = 0;
-	msidesc->msi_attrib.multiple = 0;
 
 	return ret;
 }
drivers/pci/msi.c +15 -25
index fb2ccb536324..afe974600c7d 100644
@@ -85,19 +85,13 @@ int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
  */
 void default_teardown_msi_irqs(struct pci_dev *dev)
 {
+	int i;
 	struct msi_desc *entry;
 
-	list_for_each_entry(entry, &dev->msi_list, list) {
-		int i, nvec;
-		if (entry->irq == 0)
-			continue;
-		if (entry->nvec_used)
-			nvec = entry->nvec_used;
-		else
-			nvec = 1 << entry->msi_attrib.multiple;
-		for (i = 0; i < nvec; i++)
-			arch_teardown_msi_irq(entry->irq + i);
-	}
+	list_for_each_entry(entry, &dev->msi_list, list)
+		if (entry->irq)
+			for (i = 0; i < entry->nvec_used; i++)
+				arch_teardown_msi_irq(entry->irq + i);
 }
 
 void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
@@ -353,19 +347,12 @@ static void free_msi_irqs(struct pci_dev *dev)
 	struct msi_desc *entry, *tmp;
 	struct attribute **msi_attrs;
 	struct device_attribute *dev_attr;
-	int count = 0;
+	int i, count = 0;
 
-	list_for_each_entry(entry, &dev->msi_list, list) {
-		int i, nvec;
-		if (!entry->irq)
-			continue;
-		if (entry->nvec_used)
-			nvec = entry->nvec_used;
-		else
-			nvec = 1 << entry->msi_attrib.multiple;
-		for (i = 0; i < nvec; i++)
-			BUG_ON(irq_has_action(entry->irq + i));
-	}
+	list_for_each_entry(entry, &dev->msi_list, list)
+		if (entry->irq)
+			for (i = 0; i < entry->nvec_used; i++)
+				BUG_ON(irq_has_action(entry->irq + i));
 
 	arch_teardown_msi_irqs(dev);
 
@@ -556,7 +543,7 @@ error_attrs:
 	return ret;
 }
 
-static struct msi_desc *msi_setup_entry(struct pci_dev *dev)
+static struct msi_desc *msi_setup_entry(struct pci_dev *dev, int nvec)
 {
 	u16 control;
 	struct msi_desc *entry;
@@ -574,6 +561,8 @@ static struct msi_desc *msi_setup_entry(struct pci_dev *dev)
 	entry->msi_attrib.maskbit	= !!(control & PCI_MSI_FLAGS_MASKBIT);
 	entry->msi_attrib.default_irq	= dev->irq;	/* Save IOAPIC IRQ */
 	entry->msi_attrib.multi_cap	= (control & PCI_MSI_FLAGS_QMASK) >> 1;
+	entry->msi_attrib.multiple	= ilog2(__roundup_pow_of_two(nvec));
+	entry->nvec_used		= nvec;
 
 	if (control & PCI_MSI_FLAGS_64BIT)
 		entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_64;
@@ -606,7 +595,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec)
 
 	msi_set_enable(dev, 0);	/* Disable MSI during set up */
 
-	entry = msi_setup_entry(dev);
+	entry = msi_setup_entry(dev, nvec);
 	if (!entry)
 		return -ENOMEM;
 
@@ -677,6 +666,7 @@ static int msix_setup_entries(struct pci_dev *dev, void __iomem *base,
 		entry->msi_attrib.entry_nr	= entries[i].entry;
 		entry->msi_attrib.default_irq	= dev->irq;
 		entry->mask_base		= base;
+		entry->nvec_used		= 1;
 
 		list_add_tail(&entry->list, &dev->msi_list);
 	}
Signature · 1 line
1.7.10.4
author
#20 lore raw

PATCH v5 20/31 PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts

In reply to Jiang Liu

It's arch_setup_msi_irq()/arch_setup_msi_irqs()'s responsibility to call irq_set_msi_desc() to associate IRQ descriptors and MSI descriptors, so kill the redundant call of irq_set_msi_desc() for MSI-X interrupts in PCI MSI core.

---
 drivers/pci/msi.c |    1 -
 1 file changed, 1 deletion(-)
drivers/pci/msi.c +0 -1
index afe974600c7d..da181c59394b 100644
@@ -685,7 +685,6 @@ static void msix_program_entries(struct pci_dev *dev,
 						PCI_MSIX_ENTRY_VECTOR_CTRL;
 
 		entries[i].vector = entry->irq;
-		irq_set_msi_desc(entry->irq, entry);
 		entry->masked = readl(entry->mask_base + offset);
 		msix_mask_irq(entry, 1);
 		i++;
Signature · 1 line
1.7.10.4
author
#21 lore raw

PATCH v5 21/31 PCI/MSI: Enhance core to support hierarchy irqdomain

In reply to Jiang Liu

Enhance PCI MSI core to support hierarchy irqdomain, so the common code could be shared among architectures.

---
Hi Thomas,
These changes are a temporary solution, I'm working on another
patch set which will refine these interfaces, especially kill arch_msi_irq_domain_{set|get}_hwirq().
Regards!
Gerry

---
 drivers/pci/Kconfig |    4 ++
 drivers/pci/msi.c   |  134 +++++++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/msi.h |   14 ++++++
 3 files changed, 152 insertions(+)
drivers/pci/Kconfig +4 -0
index b9db0f2ce11f..022e89745f86 100644
@@ -16,6 +16,10 @@ config PCI_MSI
 
 	   If you don't know what to do here, say Y.
 
+config PCI_MSI_IRQ_DOMAIN
+	bool
+	depends on PCI_MSI && IRQ_DOMAIN_HIERARCHY
+
 config PCI_DEBUG
 	bool "PCI Debugging"
 	depends on PCI && DEBUG_KERNEL
drivers/pci/msi.c +134 -0

143 lines not on this page · raw message

include/linux/msi.h +14 -0
index 44f4746d033b..662c628fc2fa 100644
@@ -75,4 +75,18 @@ struct msi_chip {
 	void (*teardown_irq)(struct msi_chip *chip, unsigned int irq);
 };
 
+#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
+struct irq_domain;
+struct irq_chip;
+
+struct irq_domain *msi_create_irq_domain(struct device_node *of_node,
+					 struct irq_chip *chip,
+					 struct irq_domain *parent);
+int msi_irq_domain_alloc_irqs(struct irq_domain *domain, int type,
+			      struct pci_dev *dev, void *arg);
+
+irq_hw_number_t arch_msi_irq_domain_get_hwirq(void *arg);
+void arch_msi_irq_domain_set_hwirq(void *arg, irq_hw_number_t hwirq);
+#endif /* CONFIG_PCI_MSI_IRQ_DOMAIN */
+
 #endif /* LINUX_MSI_H */
Signature · 1 line
1.7.10.4
#22 lore raw

Re: [Patch Part2 v5 21/31] PCI/MSI: Enhance core to support hierarchy irqdomain

Quoted 9 lines · Jiang Liu

Enhance PCI MSI core to support hierarchy irqdomain, so the common code could be shared among architectures.

---
Hi Thomas,
These changes are a temporary solution, I'm working on another
patch set which will refine these interfaces, especially kill arch_msi_irq_domain_{set|get}_hwirq().

Ok. Please don't forget the irq_chip change :)

Thanks,

tglx

#23 lore raw

Re: [Patch Part2 v5 21/31] PCI/MSI: Enhance core to support hierarchy irqdomain

In reply to Jiang Liu

Hi Gerry,

Please see my comments / questions below.

Quoted 11 lines · Jiang Liu

Enhance PCI MSI core to support hierarchy irqdomain, so the common code could be shared among architectures.

---
Hi Thomas,
These changes are a temporary solution, I'm working on another
patch set which will refine these interfaces, especially kill arch_msi_irq_domain_{set|get}_hwirq().
Regards!
Gerry

Would the change includes the struct irqdomain_msi_data proposed by Thomas here (https://lkml.org/lkml/2014/11/6/210)?

Quoted 4 lines

[...]

drivers/pci/msi.c +3 -0
+static int msi_domain_alloc(struct irq_domain *domain, unsigned int virq,
+			    unsigned int nr_irqs, void *arg)
+{

drivers/pci/msi.c int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, · line 1128

Quoted 10 lines
drivers/pci/msi.c +10 -0
+	int i, ret;
+	irq_hw_number_t hwirq = arch_msi_irq_domain_get_hwirq(arg);
+
+	if (irq_find_mapping(domain, hwirq) > 0)
+		return -EEXIST;
+
+	ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
+	if (ret < 0)
+		return ret;
+

When executing irq_domain_alloc_irqs_parent(), it triggers the following warning message due to

	WARN_ON(desc->irq_data.chip == &no_irq_chip)
------------[ cut here ]------------
WARNING: CPU: 2 PID: 912 at kernel/irq/chip.c:734 __irq_set_handler+0x138/0x13c()
Modules linked in: mlx4_core(+) rtc_efi efivarfs
CPU: 2 PID: 912 Comm: modprobe Not tainted 3.18.0-rc3-p2v5+ #53
Call trace:
[<fffffe00000963d4>] dump_backtrace+0x0/0x16c
[<fffffe0000096550>] show_stack+0x10/0x1c
[<fffffe000067545c>] dump_stack+0x74/0x98
[<fffffe00000b205c>] warn_slowpath_common+0x84/0xac
[<fffffe00000b2148>] warn_slowpath_null+0x14/0x20
[<fffffe00000ed968>] __irq_set_handler+0x134/0x13c
[<fffffe000042af14>] gic_irq_domain_map+0x4c/0xac
[<fffffe000042afd4>] gic_irq_domain_alloc+0x60/0x88
[<fffffe000042b374>] gicv2m_domain_alloc+0x30/0xa8
[<fffffe00000efc1c>] __irq_domain_alloc_irqs+0x144/0x30c
[<fffffe000042b58c>] gicv2m_setup_msi_irq+0xc0/0x118
[<fffffe000044548c>] arch_setup_msi_irq+0x34/0x60
[<fffffe0000445544>] arch_setup_msi_irqs+0x50/0xb0
[<fffffe0000445e3c>] pci_enable_msix+0x310/0x39c
[<fffffe0000445efc>] pci_enable_msix_range+0x34/0x9c

....

However, I think if we call irq_domain_set_hwirq_and_chip() in the msi_create_irq_domain() as suggested by Thomas, that should also fix this issue.

drivers/pci/msi.c int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, · line 1134

Quoted 6 lines
drivers/pci/msi.c +6 -0
+	for (i = 0; i < nr_irqs; i++) {
+		irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
+					      domain->host_data,
+					      (void *)(long)i);
+		__irq_set_handler(virq + i, handle_edge_irq, 0, "edge");
+	}

Is there are a way to specify other type of handler besides edge?

drivers/pci/msi.c int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, · line 1164

Quoted 13 lines

[...]

drivers/pci/msi.c +12 -0
+static void msi_domain_activate(struct irq_domain *domain,
+				struct irq_data *irq_data)
+{
+	struct msi_msg msg;
+
+	/*
+	 * irq_data->chip_data is MSI/MSI-X offset.
+	 * MSI-X message is written per-IRQ, the offset is always 0.
+	 * MSI message denotes a contiguous group of IRQs, written for 0th IRQ.
+	 */
+	if (irq_data->chip_data)
+		return;

Actually, I am a bit confused with this comment here. If you look at "/drivers/pci/msi.c: arch_setup_msi_irq()", it calls irq_set_chip_data(des->irq, chip) where chip is *msi_chip.

It looks like if the arch uses this API, it would conflict with what you have here where the irq_data->chip_data would be not NULL at the logic above, and would always return.

Thank you,

Suravee

author
#24 lore raw

Re: [Patch Part2 v5 21/31] PCI/MSI: Enhance core to support hierarchy irqdomain

Quoted 17 lines · Suravee Suthikulpanit

Hi Gerry,

Please see my comments / questions below.

Quoted 11 lines · Jiang Liu

Enhance PCI MSI core to support hierarchy irqdomain, so the common code could be shared among architectures.

---
Hi Thomas,
These changes are a temporary solution, I'm working on another
patch set which will refine these interfaces, especially kill arch_msi_irq_domain_{set|get}_hwirq().
Regards!
Gerry

Quoted 2 lines

Would the change includes the struct irqdomain_msi_data proposed by Thomas here (https://lkml.org/lkml/2014/11/6/210)?

Hi Suravee,
I'm working on another patch set which will refine the way to
create irqdomain for MSI. I hope will solve all issues mentioned by Thomas. I will post that patch set as RFC within one or two days.

Quoted 43 lines
Quoted 6 lines

[...]
+static int msi_domain_alloc(struct irq_domain *domain, unsigned int virq,

drivers/pci/msi.c +2 -0
+                unsigned int nr_irqs, void *arg)
+{

drivers/pci/msi.c int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, · line 1128

Quoted 10 lines
drivers/pci/msi.c +10 -0
+    int i, ret;
+    irq_hw_number_t hwirq = arch_msi_irq_domain_get_hwirq(arg);
+
+    if (irq_find_mapping(domain, hwirq) > 0)
+        return -EEXIST;
+
+    ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
+    if (ret < 0)
+        return ret;
+

When executing irq_domain_alloc_irqs_parent(), it triggers the following warning message due to

    WARN_ON(desc->irq_data.chip == &no_irq_chip)
------------[ cut here ]------------
WARNING: CPU: 2 PID: 912 at kernel/irq/chip.c:734
__irq_set_handler+0x138/0x13c()
Modules linked in: mlx4_core(+) rtc_efi efivarfs
CPU: 2 PID: 912 Comm: modprobe Not tainted 3.18.0-rc3-p2v5+ #53
Call trace:
[<fffffe00000963d4>] dump_backtrace+0x0/0x16c
[<fffffe0000096550>] show_stack+0x10/0x1c
[<fffffe000067545c>] dump_stack+0x74/0x98
[<fffffe00000b205c>] warn_slowpath_common+0x84/0xac
[<fffffe00000b2148>] warn_slowpath_null+0x14/0x20
[<fffffe00000ed968>] __irq_set_handler+0x134/0x13c
[<fffffe000042af14>] gic_irq_domain_map+0x4c/0xac
[<fffffe000042afd4>] gic_irq_domain_alloc+0x60/0x88
[<fffffe000042b374>] gicv2m_domain_alloc+0x30/0xa8
[<fffffe00000efc1c>] __irq_domain_alloc_irqs+0x144/0x30c
[<fffffe000042b58c>] gicv2m_setup_msi_irq+0xc0/0x118
[<fffffe000044548c>] arch_setup_msi_irq+0x34/0x60
[<fffffe0000445544>] arch_setup_msi_irqs+0x50/0xb0
[<fffffe0000445e3c>] pci_enable_msix+0x310/0x39c
[<fffffe0000445efc>] pci_enable_msix_range+0x34/0x9c
Quoted 5 lines

....

However, I think if we call irq_domain_set_hwirq_and_chip() in the msi_create_irq_domain() as suggested by Thomas, that should also fix this issue.

We didn't trigger this warning on x86 because only the outer-most irqdomain will set irq flow handler. On ARM, the inner GIC domain will set irq flow handler, but the irq_data->chip for outer-most domain hasn't been set yet.

I'm still find a way out here. Maybe we need to relax the WARN_ON().

Quoted 9 lines

drivers/pci/msi.c int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, · line 1134

Quoted 7 lines
drivers/pci/msi.c +6 -0
+    for (i = 0; i < nr_irqs; i++) {
+        irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
+                          domain->host_data,
+                          (void *)(long)i);
+        __irq_set_handler(virq + i, handle_edge_irq, 0, "edge");
+    }

Is there are a way to specify other type of handler besides edge?

Yes, the new patch set will address this requirement.

Quoted 20 lines
Quoted 12 lines

[...]

drivers/pci/msi.c +9 -0
+static void msi_domain_activate(struct irq_domain *domain,
+                struct irq_data *irq_data)
+{
+    struct msi_msg msg;
+
+    /*
+     * irq_data->chip_data is MSI/MSI-X offset.
+     * MSI-X message is written per-IRQ, the offset is always 0.
+     * MSI message denotes a contiguous group of IRQs, written for

0th IRQ.

drivers/pci/msi.c int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, · line 1164

Quoted 3 lines
drivers/pci/msi.c +3 -0
+     */
+    if (irq_data->chip_data)
+        return;

Actually, I am a bit confused with this comment here. If you look at "/drivers/pci/msi.c: arch_setup_msi_irq()", it calls irq_set_chip_data(des->irq, chip) where chip is *msi_chip.

Quoted 3 lines

It looks like if the arch uses this API, it would conflict with what you have here where the irq_data->chip_data would be not NULL at the logic above, and would always return.

Good point, it's work on x86, but will break ARM or other platforms. Will refine this part.
Regards!
Gerry

Quoted 4 lines

Thank you,

Suravee

#25 lore raw

Re: [Patch Part2 v5 21/31] PCI/MSI: Enhance core to support hierarchy irqdomain

Quoted 18 lines · Jiang Liu
Quoted 17 lines · Suravee Suthikulpanit

Hi Gerry,

Please see my comments / questions below.

Quoted 11 lines · Jiang Liu

Enhance PCI MSI core to support hierarchy irqdomain, so the common code could be shared among architectures.

---
Hi Thomas,
These changes are a temporary solution, I'm working on another
patch set which will refine these interfaces, especially kill arch_msi_irq_domain_{set|get}_hwirq().
Regards!
Gerry

Quoted 6 lines
Quoted 2 lines

Would the change includes the struct irqdomain_msi_data proposed by Thomas here (https://lkml.org/lkml/2014/11/6/210)?

Hi Suravee,
I'm working on another patch set which will refine the way to
create irqdomain for MSI. I hope will solve all issues mentioned by Thomas. I will post that patch set as RFC within one or two days.

Let me know if I can help.

Quoted 48 lines
Quoted 43 lines
Quoted 6 lines

[...]
+static int msi_domain_alloc(struct irq_domain *domain, unsigned int virq,

drivers/pci/msi.c +2 -0
+                unsigned int nr_irqs, void *arg)
+{

drivers/pci/msi.c int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, · line 1128

Quoted 10 lines
drivers/pci/msi.c +10 -0
+    int i, ret;
+    irq_hw_number_t hwirq = arch_msi_irq_domain_get_hwirq(arg);
+
+    if (irq_find_mapping(domain, hwirq) > 0)
+        return -EEXIST;
+
+    ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
+    if (ret < 0)
+        return ret;
+

When executing irq_domain_alloc_irqs_parent(), it triggers the following warning message due to

     WARN_ON(desc->irq_data.chip == &no_irq_chip)
------------[ cut here ]------------
WARNING: CPU: 2 PID: 912 at kernel/irq/chip.c:734
__irq_set_handler+0x138/0x13c()
Modules linked in: mlx4_core(+) rtc_efi efivarfs
CPU: 2 PID: 912 Comm: modprobe Not tainted 3.18.0-rc3-p2v5+ #53
Call trace:
[<fffffe00000963d4>] dump_backtrace+0x0/0x16c
[<fffffe0000096550>] show_stack+0x10/0x1c
[<fffffe000067545c>] dump_stack+0x74/0x98
[<fffffe00000b205c>] warn_slowpath_common+0x84/0xac
[<fffffe00000b2148>] warn_slowpath_null+0x14/0x20
[<fffffe00000ed968>] __irq_set_handler+0x134/0x13c
[<fffffe000042af14>] gic_irq_domain_map+0x4c/0xac
[<fffffe000042afd4>] gic_irq_domain_alloc+0x60/0x88
[<fffffe000042b374>] gicv2m_domain_alloc+0x30/0xa8
[<fffffe00000efc1c>] __irq_domain_alloc_irqs+0x144/0x30c
[<fffffe000042b58c>] gicv2m_setup_msi_irq+0xc0/0x118
[<fffffe000044548c>] arch_setup_msi_irq+0x34/0x60
[<fffffe0000445544>] arch_setup_msi_irqs+0x50/0xb0
[<fffffe0000445e3c>] pci_enable_msix+0x310/0x39c
[<fffffe0000445efc>] pci_enable_msix_range+0x34/0x9c
Quoted 5 lines

....

However, I think if we call irq_domain_set_hwirq_and_chip() in the msi_create_irq_domain() as suggested by Thomas, that should also fix this issue.

Quoted 6 lines

We didn't trigger this warning on x86 because only the outer-most irqdomain will set irq flow handler. On ARM, the inner GIC domain will set irq flow handler, but the irq_data->chip for outer-most domain hasn't been set yet.

I'm still find a way out here. Maybe we need to relax the WARN_ON().

What if we just switch the order and call the irq_domain_alloc_irqs_parent() after the loop? That way we can still keep the WARN_ON().

Suravee

author
#26 lore raw

PATCH 1/1 PCI/MSI: Enhance core to support hierarchy irqdomain

In reply to Jiang Liu

Enhance PCI MSI core to support hierarchy irqdomain, so the common code could be shared among architectures.

---
Hi Thomas,
This update fixes a possible conflict on other architectures
when they try to use the new MSI hierarchy irqdomain, as pointed out by Suravee Suthikulanit. The main change is as below.
Regards!
Gerry

static void msi_domain_deactivate(struct irq_domain *domain,
struct irq_data *irq_data)
{
struct msi_msg msg;
+ struct msi_desc *desc = irq_data->msi_desc;

- if (!irq_data->chip_data) {
+ if (desc->irq == irq_data->irq) {
memset(&msg, 0, sizeof(msg)); __write_msi_msg(irq_data->msi_desc, &msg);
}

---
 drivers/pci/Kconfig |    4 ++
 drivers/pci/msi.c   |  133 +++++++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/msi.h |   14 ++++++
 3 files changed, 151 insertions(+)
drivers/pci/Kconfig +4 -0
index b9db0f2ce11f..022e89745f86 100644
@@ -16,6 +16,10 @@ config PCI_MSI
 
 	   If you don't know what to do here, say Y.
 
+config PCI_MSI_IRQ_DOMAIN
+	bool
+	depends on PCI_MSI && IRQ_DOMAIN_HIERARCHY
+
 config PCI_DEBUG
 	bool "PCI Debugging"
 	depends on PCI && DEBUG_KERNEL
drivers/pci/msi.c +133 -0

142 lines not on this page · raw message

include/linux/msi.h +14 -0
index 44f4746d033b..662c628fc2fa 100644
@@ -75,4 +75,18 @@ struct msi_chip {
 	void (*teardown_irq)(struct msi_chip *chip, unsigned int irq);
 };
 
+#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
+struct irq_domain;
+struct irq_chip;
+
+struct irq_domain *msi_create_irq_domain(struct device_node *of_node,
+					 struct irq_chip *chip,
+					 struct irq_domain *parent);
+int msi_irq_domain_alloc_irqs(struct irq_domain *domain, int type,
+			      struct pci_dev *dev, void *arg);
+
+irq_hw_number_t arch_msi_irq_domain_get_hwirq(void *arg);
+void arch_msi_irq_domain_set_hwirq(void *arg, irq_hw_number_t hwirq);
+#endif /* CONFIG_PCI_MSI_IRQ_DOMAIN */
+
 #endif /* LINUX_MSI_H */
Signature · 1 line
1.7.10.4
author
#27 lore raw

PATCH v5 22/31 x86, PCI, MSI: Use hierarchy irqdomain to manage MSI interrupts

In reply to Jiang Liu

Enhance MSI code to support hierarchy irqdomain, it helps to make the architecture more clear.

---
 arch/x86/Kconfig                     |    1 +
 arch/x86/include/asm/hw_irq.h        |    9 ++-
 arch/x86/include/asm/irq_remapping.h |    6 +-
 arch/x86/kernel/apic/msi.c           |  120 +++++++++++++++++-----------------
 arch/x86/kernel/apic/vector.c        |    2 +
 drivers/iommu/irq_remapping.c        |    1 -
 6 files changed, 72 insertions(+), 67 deletions(-)
arch/x86/Kconfig +1 -0
index 9df24a42f54d..a3675e4f4342 100644
@@ -885,6 +885,7 @@ config X86_LOCAL_APIC
 	select GENERIC_IRQ_LEGACY_ALLOC_HWIRQ
 	select IRQ_DOMAIN
 	select IRQ_DOMAIN_HIERARCHY
+	select PCI_MSI_IRQ_DOMAIN if PCI_MSI
 
 config X86_IO_APIC
 	def_bool X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC
arch/x86/include/asm/hw_irq.h +8 -1
index cf84eac7a394..047d238e69d2 100644
@@ -110,9 +110,10 @@ struct irq_2_irte {
 };
 #endif	/* CONFIG_IRQ_REMAP */
 
+struct irq_domain;
+
 #ifdef	CONFIG_X86_LOCAL_APIC
 struct irq_data;
-struct irq_domain;
 struct pci_dev;
 struct msi_desc;
 
@@ -210,6 +211,12 @@ static inline void lock_vector_lock(void) {}
 static inline void unlock_vector_lock(void) {}
 #endif	/* CONFIG_X86_LOCAL_APIC */
 
+#ifdef	CONFIG_PCI_MSI
+extern void arch_init_msi_domain(struct irq_domain *domain);
+#else
+static inline void arch_init_msi_domain(struct irq_domain *domain) { }
+#endif
+
 /* Statistics */
 extern atomic_t irq_err_count;
 extern atomic_t irq_mis_count;
arch/x86/include/asm/irq_remapping.h +1 -5
index d2410ac8cef9..c4fa0d2291b8 100644
@@ -71,11 +71,7 @@ extern void irq_remapping_print_chip(struct irq_data *data, struct seq_file *p);
  * Create MSI/MSIx irqdomain for interrupt remapping device, use @parent as
  * parent irqdomain.
  */
-static inline struct irq_domain *
-arch_create_msi_irq_domain(struct irq_domain *parent)
-{
-	return NULL;
-}
+extern struct irq_domain *arch_create_msi_irq_domain(struct irq_domain *parent);
 
 /* Get parent irqdomain for interrupt remapping irqdomain */
 static inline struct irq_domain *arch_get_ir_parent_domain(void)
arch/x86/kernel/apic/msi.c +60 -60

170 lines not on this page · raw message

arch/x86/kernel/apic/vector.c +2 -0
index e7b1d6892e66..6d3cc6a0b1eb 100644
@@ -364,6 +364,8 @@ int __init arch_early_irq_init(void)
 	BUG_ON(x86_vector_domain == NULL);
 	irq_set_default_host(x86_vector_domain);
 
+	arch_init_msi_domain(x86_vector_domain);
+
 	return arch_early_ioapic_init();
 }
 
drivers/iommu/irq_remapping.c +0 -1
index 32fe5b1322d0..414ab0cddbbc 100644
@@ -171,7 +171,6 @@ static void __init irq_remapping_modify_x86_ops(void)
 	x86_io_apic_ops.set_affinity	= set_remapped_irq_affinity;
 	x86_io_apic_ops.setup_entry	= setup_ioapic_remapped_entry;
 	x86_io_apic_ops.eoi_ioapic_pin	= eoi_ioapic_pin_remapped;
-	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
 	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
 	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
 }
Signature · 1 line
1.7.10.4
author
#28 lore raw

PATCH v5 23/31 x86, irq: Directly call native_compose_msi_msg() for DMAR IRQ

In reply to Jiang Liu

DMAR interrupt won't be remapped by interrupt remapping hardware, so directly call native_compose_msi_msg() for DMAR IRQ to compose MSI message data. This will help to simplify MSI code later.

---
 arch/x86/kernel/apic/msi.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
arch/x86/kernel/apic/msi.c +2 -4
index f401bcd23e3a..3e0ac4516000 100644
@@ -250,12 +250,10 @@ static struct irq_chip dmar_msi_type = {
 
 int arch_setup_dmar_msi(unsigned int irq)
 {
-	int ret;
 	struct msi_msg msg;
+	struct irq_cfg *cfg = irq_cfg(irq);
 
-	ret = msi_compose_msg(NULL, irq, &msg, -1);
-	if (ret < 0)
-		return ret;
+	native_compose_msi_msg(NULL, irq, cfg->dest_apicid, &msg, -1);
 	dmar_msi_write(irq, &msg);
 	irq_set_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq,
 				      "edge");
Signature · 1 line
1.7.10.4
author
#29 lore raw

PATCH v5 24/31 iommu/vt-d: Clean up unused MSI related code

In reply to Jiang Liu

Now MSI interrupt has been converted to new hierarchy irqdomain interfaces, so kill legacy MSI related code.

---
 drivers/iommu/intel_irq_remapping.c |  144 -----------------------------------
 1 file changed, 144 deletions(-)
drivers/iommu/intel_irq_remapping.c +0 -144
index e58b9a594311..d32e3699a55e 100644
@@ -145,44 +145,6 @@ static int qi_flush_iec(struct intel_iommu *iommu, int index, int mask)
 	return qi_submit_sync(&desc, iommu);
 }
 
-static int map_irq_to_irte_handle(int irq, u16 *sub_handle)
-{
-	struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
-	unsigned long flags;
-	int index;
-
-	if (!irq_iommu)
-		return -1;
-
-	raw_spin_lock_irqsave(&irq_2_ir_lock, flags);
-	*sub_handle = irq_iommu->sub_handle;
-	index = irq_iommu->irte_index;
-	raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags);
-	return index;
-}
-
-static int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index, u16 subhandle)
-{
-	struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
-	struct irq_cfg *cfg = irq_cfg(irq);
-	unsigned long flags;
-
-	if (!irq_iommu)
-		return -1;
-
-	raw_spin_lock_irqsave(&irq_2_ir_lock, flags);
-
-	cfg->remapped = 1;
-	irq_iommu->iommu = iommu;
-	irq_iommu->irte_index = index;
-	irq_iommu->sub_handle = subhandle;
-	irq_iommu->irte_mask = 0;
-
-	raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags);
-
-	return 0;
-}
-
 static int modify_irte(struct irq_2_iommu *irq_iommu,
 		       struct irte *irte_modified)
 {
@@ -1070,108 +1032,6 @@ intel_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
 	return 0;
 }
 
-static void intel_compose_msi_msg(struct pci_dev *pdev,
-				  unsigned int irq, unsigned int dest,
-				  struct msi_msg *msg, u8 hpet_id)
-{
-	struct irq_cfg *cfg;
-	struct irte irte;
-	u16 sub_handle = 0;
-	int ir_index;
-
-	cfg = irq_cfg(irq);
-
-	ir_index = map_irq_to_irte_handle(irq, &sub_handle);
-	BUG_ON(ir_index == -1);
-
-	prepare_irte(&irte, cfg->vector, dest);
-
-	/* Set source-id of interrupt request */
-	if (pdev)
-		set_msi_sid(&irte, pdev);
-	else
-		set_hpet_sid(&irte, hpet_id);
-
-	modify_irte(irq_2_iommu(irq), &irte);
-
-	msg->address_hi = MSI_ADDR_BASE_HI;
-	msg->data = sub_handle;
-	msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
-			  MSI_ADDR_IR_SHV |
-			  MSI_ADDR_IR_INDEX1(ir_index) |
-			  MSI_ADDR_IR_INDEX2(ir_index);
-}
-
-/*
- * Map the PCI dev to the corresponding remapping hardware unit
- * and allocate 'nvec' consecutive interrupt-remapping table entries
- * in it.
- */
-static int intel_msi_alloc_irq(struct pci_dev *dev, int irq, int nvec)
-{
-	struct intel_iommu *iommu;
-	int index;
-
-	down_read(&dmar_global_lock);
-	iommu = map_dev_to_ir(dev);
-	if (!iommu) {
-		printk(KERN_ERR
-		       "Unable to map PCI %s to iommu\n", pci_name(dev));
-		index = -ENOENT;
-	} else {
-		index = alloc_irte(iommu, irq, irq_2_iommu(irq), nvec);
-		if (index < 0) {
-			printk(KERN_ERR
-			       "Unable to allocate %d IRTE for PCI %s\n",
-			       nvec, pci_name(dev));
-			index = -ENOSPC;
-		}
-	}
-	up_read(&dmar_global_lock);
-
-	return index;
-}
-
-static int intel_msi_setup_irq(struct pci_dev *pdev, unsigned int irq,
-			       int index, int sub_handle)
-{
-	struct intel_iommu *iommu;
-	int ret = -ENOENT;
-
-	down_read(&dmar_global_lock);
-	iommu = map_dev_to_ir(pdev);
-	if (iommu) {
-		/*
-		 * setup the mapping between the irq and the IRTE
-		 * base index, the sub_handle pointing to the
-		 * appropriate interrupt remap table entry.
-		 */
-		set_irte_irq(irq, iommu, index, sub_handle);
-		ret = 0;
-	}
-	up_read(&dmar_global_lock);
-
-	return ret;
-}
-
-static int intel_alloc_hpet_msi(unsigned int irq, unsigned int id)
-{
-	int ret = -1;
-	struct intel_iommu *iommu;
-	int index;
-
-	down_read(&dmar_global_lock);
-	iommu = map_hpet_to_ir(id);
-	if (iommu) {
-		index = alloc_irte(iommu, irq, irq_2_iommu(irq), 1);
-		if (index >= 0)
-			ret = 0;
-	}
-	up_read(&dmar_global_lock);
-
-	return ret;
-}
-
 static struct irq_domain *intel_get_ir_irq_domain(struct irq_alloc_info *info)
 {
 	struct intel_iommu *iommu = NULL;
@@ -1229,10 +1089,6 @@ struct irq_remap_ops intel_irq_remap_ops = {
 	.setup_ioapic_entry	= intel_setup_ioapic_entry,
 	.set_affinity		= intel_ioapic_set_affinity,
 	.free_irq		= free_irte,
-	.compose_msi_msg	= intel_compose_msi_msg,
-	.msi_alloc_irq		= intel_msi_alloc_irq,
-	.msi_setup_irq		= intel_msi_setup_irq,
-	.alloc_hpet_msi		= intel_alloc_hpet_msi,
 	.get_ir_irq_domain	= intel_get_ir_irq_domain,
 	.get_irq_domain		= intel_get_irq_domain,
 };
Signature · 1 line
1.7.10.4
author
#30 lore raw

PATCH v5 25/31 iommu/amd: Clean up unused MSI related code

In reply to Jiang Liu

Now MSI interrupt has been converted to new hierarchy irqdomain interfaces, so kill legacy MSI related code.

---
 drivers/iommu/amd_iommu.c |  115 +--------------------------------------------
 1 file changed, 2 insertions(+), 113 deletions(-)
drivers/iommu/amd_iommu.c +2 -113
index 53265d70f0b4..336d310b5b7b 100644
@@ -3958,8 +3958,7 @@ out_unlock:
 	return table;
 }
 
-static int alloc_irq_index(struct irq_cfg *cfg, struct irq_2_irte *irte_info,
-			   u16 devid, int count)
+static int alloc_irq_index(u16 devid, int count)
 {
 	struct irq_remap_table *table;
 	unsigned long flags;
@@ -3985,11 +3984,6 @@ static int alloc_irq_index(struct irq_cfg *cfg, struct irq_2_irte *irte_info,
 				table->table[index - c + 1] = IRTE_ALLOCATED;
 
 			index -= count - 1;
-
-			cfg->remapped	      = 1;
-			irte_info->devid      = devid;
-			irte_info->index      = index;
-
 			goto out;
 		}
 	}
@@ -4189,106 +4183,6 @@ static int free_irq(int irq)
 	return 0;
 }
 
-static void compose_msi_msg(struct pci_dev *pdev,
-			    unsigned int irq, unsigned int dest,
-			    struct msi_msg *msg, u8 hpet_id)
-{
-	struct irq_2_irte *irte_info;
-	struct irq_cfg *cfg;
-	union irte irte;
-
-	cfg = irq_cfg(irq);
-	if (!cfg)
-		return;
-
-	irte_info = &cfg->irq_2_irte;
-
-	irte.val		= 0;
-	irte.fields.vector	= cfg->vector;
-	irte.fields.int_type    = apic->irq_delivery_mode;
-	irte.fields.destination	= dest;
-	irte.fields.dm		= apic->irq_dest_mode;
-	irte.fields.valid	= 1;
-
-	modify_irte(irte_info->devid, irte_info->index, irte);
-
-	msg->address_hi = MSI_ADDR_BASE_HI;
-	msg->address_lo = MSI_ADDR_BASE_LO;
-	msg->data       = irte_info->index;
-}
-
-static int msi_alloc_irq(struct pci_dev *pdev, int irq, int nvec)
-{
-	struct irq_cfg *cfg;
-	int index;
-	u16 devid;
-
-	if (!pdev)
-		return -EINVAL;
-
-	cfg = irq_cfg(irq);
-	if (!cfg)
-		return -EINVAL;
-
-	devid = get_device_id(&pdev->dev);
-	index = alloc_irq_index(cfg, &cfg->irq_2_irte, devid, nvec);
-
-	return index < 0 ? MAX_IRQS_PER_TABLE : index;
-}
-
-static int msi_setup_irq(struct pci_dev *pdev, unsigned int irq,
-			 int index, int offset)
-{
-	struct irq_2_irte *irte_info;
-	struct irq_cfg *cfg;
-	u16 devid;
-
-	if (!pdev)
-		return -EINVAL;
-
-	cfg = irq_cfg(irq);
-	if (!cfg)
-		return -EINVAL;
-
-	if (index >= MAX_IRQS_PER_TABLE)
-		return 0;
-
-	devid		= get_device_id(&pdev->dev);
-	irte_info	= &cfg->irq_2_irte;
-
-	cfg->remapped	      = 1;
-	irte_info->devid      = devid;
-	irte_info->index      = index + offset;
-
-	return 0;
-}
-
-static int alloc_hpet_msi(unsigned int irq, unsigned int id)
-{
-	struct irq_2_irte *irte_info;
-	struct irq_cfg *cfg;
-	int index, devid;
-
-	cfg = irq_cfg(irq);
-	if (!cfg)
-		return -EINVAL;
-
-	irte_info = &cfg->irq_2_irte;
-	devid     = get_hpet_devid(id);
-	if (devid < 0)
-		return devid;
-
-	index = alloc_irq_index(cfg, &cfg->irq_2_irte, devid, 1);
-	if (index < 0)
-		return index;
-
-	cfg->remapped	      = 1;
-	irte_info->devid      = devid;
-	irte_info->index      = index;
-
-	return 0;
-}
-
 static int get_devid(struct irq_alloc_info *info)
 {
 	int devid = -1;
@@ -4365,10 +4259,6 @@ struct irq_remap_ops amd_iommu_irq_ops = {
 	.setup_ioapic_entry	= setup_ioapic_entry,
 	.set_affinity		= set_affinity,
 	.free_irq		= free_irq,
-	.compose_msi_msg	= compose_msi_msg,
-	.msi_alloc_irq		= msi_alloc_irq,
-	.msi_setup_irq		= msi_setup_irq,
-	.alloc_hpet_msi		= alloc_hpet_msi,
 	.get_ir_irq_domain	= get_ir_irq_domain,
 	.get_irq_domain		= get_irq_domain,
 };
@@ -4466,8 +4356,7 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
 		else
 			ret = -ENOMEM;
 	} else {
-		cfg = irq_cfg(virq);
-		index = alloc_irq_index(cfg, &data->irq_2_irte, devid, nr_irqs);
+		index = alloc_irq_index(devid, nr_irqs);
 	}
 	if (index < 0) {
 		pr_warn("Failed to allocate IRTE\n");
Signature · 1 line
1.7.10.4
author
#31 lore raw

PATCH v5 26/31 x86: irq_remapping: Clean up unused MSI related code

In reply to Jiang Liu

Now MSI interrupt has been converted to new hierarchy irqdomain interfaces, so kill legacy MSI related code and interfaces.

---
 arch/x86/include/asm/irq_remapping.h |   13 ---
 arch/x86/include/asm/pci.h           |    5 --
 arch/x86/kernel/x86_init.c           |    2 -
 drivers/iommu/irq_remapping.c        |  151 ----------------------------------
 drivers/iommu/irq_remapping.h        |   14 ----
 5 files changed, 185 deletions(-)
arch/x86/include/asm/irq_remapping.h +0 -13
index c4fa0d2291b8..61c50e6e28c8 100644
@@ -50,10 +50,6 @@ extern int setup_ioapic_remapped_entry(int irq,
 				       int vector,
 				       struct io_apic_irq_attr *attr);
 extern void free_remapped_irq(int irq);
-extern void compose_remapped_msi_msg(struct pci_dev *pdev,
-				     unsigned int irq, unsigned int dest,
-				     struct msi_msg *msg, u8 hpet_id);
-extern int setup_hpet_msi_remapped(unsigned int irq, unsigned int id);
 extern void panic_if_irq_remap(const char *msg);
 extern bool setup_remapped_irq(int irq,
 			       struct irq_cfg *cfg,
@@ -98,15 +94,6 @@ static inline int setup_ioapic_remapped_entry(int irq,
 	return -ENODEV;
 }
 static inline void free_remapped_irq(int irq) { }
-static inline void compose_remapped_msi_msg(struct pci_dev *pdev,
-					    unsigned int irq, unsigned int dest,
-					    struct msi_msg *msg, u8 hpet_id)
-{
-}
-static inline int setup_hpet_msi_remapped(unsigned int irq, unsigned int id)
-{
-	return -ENODEV;
-}
 
 static inline void panic_if_irq_remap(const char *msg)
 {
arch/x86/include/asm/pci.h +0 -5
index 4e370a5d8117..d8c80ff32e8c 100644
@@ -96,15 +96,10 @@ extern void pci_iommu_alloc(void);
 #ifdef CONFIG_PCI_MSI
 /* implemented in arch/x86/kernel/apic/io_apic. */
 struct msi_desc;
-void native_compose_msi_msg(struct pci_dev *pdev, unsigned int irq,
-			    unsigned int dest, struct msi_msg *msg, u8 hpet_id);
 int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
 void native_teardown_msi_irq(unsigned int irq);
 void native_restore_msi_irqs(struct pci_dev *dev);
-int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
-		  unsigned int irq_base, unsigned int irq_offset);
 #else
-#define native_compose_msi_msg		NULL
 #define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
 #endif
arch/x86/kernel/x86_init.c +0 -2
index e48b674639cc..814fcbadaad1 100644
@@ -111,11 +111,9 @@ EXPORT_SYMBOL_GPL(x86_platform);
 #if defined(CONFIG_PCI_MSI)
 struct x86_msi_ops x86_msi = {
 	.setup_msi_irqs		= native_setup_msi_irqs,
-	.compose_msi_msg	= native_compose_msi_msg,
 	.teardown_msi_irq	= native_teardown_msi_irq,
 	.teardown_msi_irqs	= default_teardown_msi_irqs,
 	.restore_msi_irqs	= default_restore_msi_irqs,
-	.setup_hpet_msi		= default_setup_hpet_msi,
 	.msi_mask_irq		= default_msi_mask_irq,
 	.msix_mask_irq		= default_msix_mask_irq,
 };
drivers/iommu/irq_remapping.c +0 -151

175 lines not on this page · raw message

drivers/iommu/irq_remapping.h +0 -14
index 8c159d6fac46..95b19a6ef16a 100644
@@ -70,20 +70,6 @@ struct irq_remap_ops {
 	/* Free an IRQ */
 	int (*free_irq)(int);
 
-	/* Create MSI msg to use for interrupt remapping */
-	void (*compose_msi_msg)(struct pci_dev *,
-				unsigned int, unsigned int,
-				struct msi_msg *, u8);
-
-	/* Allocate remapping resources for MSI */
-	int (*msi_alloc_irq)(struct pci_dev *, int, int);
-
-	/* Setup the remapped MSI irq */
-	int (*msi_setup_irq)(struct pci_dev *, unsigned int, int, int);
-
-	/* Setup interrupt remapping for an HPET MSI */
-	int (*alloc_hpet_msi)(unsigned int, unsigned int);
-
 	/* Get the irqdomain associated the IOMMU device */
 	struct irq_domain *(*get_ir_irq_domain)(struct irq_alloc_info *);
 
Signature · 1 line
1.7.10.4
author
#32 lore raw

PATCH v5 27/31 x86, irq: Clean up unused MSI related code and interfaces

In reply to Jiang Liu

Now MSI interrupt has been converted to new hierarchy irqdomain interfaces, so kill legacy MSI related code and interfaces.

---
 arch/x86/include/asm/hpet.h     |    9 ------
 arch/x86/include/asm/x86_init.h |    4 ---
 arch/x86/kernel/apic/msi.c      |   61 +++++----------------------------------
 3 files changed, 7 insertions(+), 67 deletions(-)
arch/x86/include/asm/hpet.h +0 -9
index e87e9faf87a9..5fa9fb0f8809 100644
@@ -85,15 +85,6 @@ extern struct irq_domain *hpet_create_irq_domain(int hpet_id);
 extern int hpet_assign_irq(struct irq_domain *domain,
 			   struct hpet_dev *dev, int dev_num);
 
-#ifdef CONFIG_PCI_MSI
-extern int default_setup_hpet_msi(unsigned int irq, unsigned int id);
-#else
-static inline int default_setup_hpet_msi(unsigned int irq, unsigned int id)
-{
-	return -EINVAL;
-}
-#endif
-
 #ifdef CONFIG_HPET_EMULATE_RTC
 
 #include <linux/interrupt.h>
arch/x86/include/asm/x86_init.h +0 -4
index e45e4da96bf1..9b53cb2acfbb 100644
@@ -176,13 +176,9 @@ struct msi_desc;
 
 struct x86_msi_ops {
 	int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
-	void (*compose_msi_msg)(struct pci_dev *dev, unsigned int irq,
-				unsigned int dest, struct msi_msg *msg,
-			       u8 hpet_id);
 	void (*teardown_msi_irq)(unsigned int irq);
 	void (*teardown_msi_irqs)(struct pci_dev *dev);
 	void (*restore_msi_irqs)(struct pci_dev *dev);
-	int  (*setup_hpet_msi)(unsigned int irq, unsigned int id);
 	u32 (*msi_mask_irq)(struct msi_desc *desc, u32 mask, u32 flag);
 	u32 (*msix_mask_irq)(struct msi_desc *desc, u32 flag);
 };
arch/x86/kernel/apic/msi.c +7 -54

110 lines not on this page · raw message

Signature · 1 line
1.7.10.4
author
#33 lore raw

PATCH v5 28/31 iommu/vt-d: Refine the interfaces to create IRQ for DMAR unit

In reply to Jiang Liu

Refine the interfaces to create IRQ for DMAR unit. It's a preparation for converting DMAR IRQ to irqdomain on x86.

It also moves dmar_alloc_hwirq()/dmar_free_hwirq() from irq_remapping.h to dmar.h. They are not irq_remapping specific.

---
 arch/ia64/include/asm/irq_remapping.h |    2 --
 arch/ia64/kernel/msi_ia64.c           |   30 +++++++++++++++++++-----------
 arch/x86/include/asm/irq_remapping.h  |    4 ----
 arch/x86/kernel/apic/msi.c            |   24 +++++++++++++-----------
 drivers/iommu/dmar.c                  |   19 +++++--------------
 include/linux/dmar.h                  |    3 ++-
 6 files changed, 39 insertions(+), 43 deletions(-)
arch/ia64/include/asm/irq_remapping.h +0 -2
index e3b3556e2e1b..a8687b1d8906 100644
@@ -1,6 +1,4 @@
 #ifndef __IA64_INTR_REMAPPING_H
 #define __IA64_INTR_REMAPPING_H
 #define irq_remapping_enabled 0
-#define dmar_alloc_hwirq	create_irq
-#define dmar_free_hwirq		destroy_irq
 #endif
arch/ia64/kernel/msi_ia64.c +19 -11
index 8c3730c3c63d..15032330573b 100644
@@ -166,7 +166,7 @@ static struct irq_chip dmar_msi_type = {
 	.irq_retrigger = ia64_msi_retrigger_irq,
 };
 
-static int
+static void
 msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
 {
 	struct irq_cfg *cfg = irq_cfg + irq;
@@ -188,21 +188,29 @@ msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
 		MSI_DATA_LEVEL_ASSERT |
 		MSI_DATA_DELIVERY_FIXED |
 		MSI_DATA_VECTOR(cfg->vector);
-	return 0;
 }
 
-int arch_setup_dmar_msi(unsigned int irq)
+int dmar_alloc_hwirq(int id, int node, void *arg)
 {
-	int ret;
+	int irq;
 	struct msi_msg msg;
 
-	ret = msi_compose_msg(NULL, irq, &msg);
-	if (ret < 0)
-		return ret;
-	dmar_msi_write(irq, &msg);
-	irq_set_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq,
-				      "edge");
-	return 0;
+	irq = create_irq();
+	if (irq > 0) {
+		irq_set_handler_data(irq, arg);
+		irq_set_chip_and_handler_name(irq, &dmar_msi_type,
+					      handle_edge_irq, "edge");
+		msi_compose_msg(NULL, irq, &msg);
+		dmar_msi_write(irq, &msg);
+	}
+
+	return irq;
+}
+
+void dmar_free_hwirq(int irq)
+{
+	irq_set_handler_data(irq, NULL);
+	destroy_irq(irq);
 }
 #endif /* CONFIG_INTEL_IOMMU */
 
arch/x86/include/asm/irq_remapping.h +0 -4
index 61c50e6e28c8..61ec9234c88e 100644
@@ -124,8 +124,4 @@ irq_remapping_get_irq_domain(struct irq_alloc_info *info)
 
 #define	irq_remapping_print_chip	NULL
 #endif /* CONFIG_IRQ_REMAP */
-
-extern int dmar_alloc_hwirq(void);
-extern void dmar_free_hwirq(int irq);
-
 #endif /* __X86_IRQ_REMAPPING_H */
arch/x86/kernel/apic/msi.c +13 -11
index 49f02609a7e0..5fc3e61f1b16 100644
@@ -219,25 +219,27 @@ static struct irq_chip dmar_msi_type = {
 	.flags			= IRQCHIP_SKIP_SET_WAKE,
 };
 
-int arch_setup_dmar_msi(unsigned int irq)
+int dmar_alloc_hwirq(int id, int node, void *arg)
 {
+	int irq;
 	struct msi_msg msg;
-	struct irq_cfg *cfg = irq_cfg(irq);
 
-	native_compose_msi_msg(cfg, &msg);
-	dmar_msi_write(irq, &msg);
-	irq_set_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq,
-				      "edge");
-	return 0;
-}
+	irq = irq_domain_alloc_irqs(NULL, 1, node, NULL);
+	if (irq > 0) {
+		irq_set_handler_data(irq, arg);
+		irq_set_chip_and_handler_name(irq, &dmar_msi_type,
+					      handle_edge_irq, "edge");
+		native_compose_msi_msg(irq_cfg(irq), &msg);
+		dmar_msi_write(irq, &msg);
+	}
 
-int dmar_alloc_hwirq(void)
-{
-	return irq_domain_alloc_irqs(NULL, 1, NUMA_NO_NODE, NULL);
+	return irq;
 }
 
 void dmar_free_hwirq(int irq)
 {
+	irq_set_handler_data(irq, NULL);
+	irq_set_handler(irq, NULL);
 	irq_domain_free_irqs(irq, 1);
 }
 #endif
drivers/iommu/dmar.c +5 -14
index c5c61cabd6e3..25f47937f1d5 100644
@@ -1018,8 +1018,8 @@ static void free_iommu(struct intel_iommu *iommu)
 
 	if (iommu->irq) {
 		free_irq(iommu->irq, iommu);
-		irq_set_handler_data(iommu->irq, NULL);
 		dmar_free_hwirq(iommu->irq);
+		iommu->irq = 0;
 	}
 
 	if (iommu->qi) {
@@ -1572,23 +1572,14 @@ int dmar_set_interrupt(struct intel_iommu *iommu)
 	if (iommu->irq)
 		return 0;
 
-	irq = dmar_alloc_hwirq();
-	if (irq <= 0) {
+	irq = dmar_alloc_hwirq(iommu->seq_id, iommu->node, iommu);
+	if (irq > 0) {
+		iommu->irq = irq;
+	} else {
 		pr_err("IOMMU: no free vectors\n");
 		return -EINVAL;
 	}
 
-	irq_set_handler_data(irq, iommu);
-	iommu->irq = irq;
-
-	ret = arch_setup_dmar_msi(irq);
-	if (ret) {
-		irq_set_handler_data(irq, NULL);
-		iommu->irq = 0;
-		dmar_free_hwirq(irq);
-		return ret;
-	}
-
 	ret = request_irq(irq, dmar_fault, IRQF_NO_THREAD, iommu->name, iommu);
 	if (ret)
 		pr_err("IOMMU: can't request irq\n");
include/linux/dmar.h +2 -1
index 593fff99e6bf..df3918482073 100644
@@ -189,6 +189,7 @@ extern void dmar_msi_read(int irq, struct msi_msg *msg);
 extern void dmar_msi_write(int irq, struct msi_msg *msg);
 extern int dmar_set_interrupt(struct intel_iommu *iommu);
 extern irqreturn_t dmar_fault(int irq, void *dev_id);
-extern int arch_setup_dmar_msi(unsigned int irq);
+extern int dmar_alloc_hwirq(int id, int node, void *arg);
+extern void dmar_free_hwirq(int irq);
 
 #endif /* __DMAR_H__ */
Signature · 1 line
1.7.10.4
author
#34 lore raw

PATCH v5 29/31 x86, irq: Use hierarchy irqdomain to manage DMAR interrupts

In reply to Jiang Liu

Enhance DMAR code to support hierarchy irqdomain, it helps to make the architecture more clear.

---
 arch/x86/include/asm/hw_irq.h |    7 ++
 arch/x86/kernel/apic/msi.c    |  151 ++++++++++++++++++++++++++---------------
 2 files changed, 102 insertions(+), 56 deletions(-)
arch/x86/include/asm/hw_irq.h +7 -0
index 047d238e69d2..08240216f949 100644
@@ -122,6 +122,7 @@ enum irq_alloc_type {
 	X86_IRQ_ALLOC_TYPE_HPET,
 	X86_IRQ_ALLOC_TYPE_MSI,
 	X86_IRQ_ALLOC_TYPE_MSIX,
+	X86_IRQ_ALLOC_TYPE_DMAR,
 };
 
 struct irq_alloc_info {
@@ -152,6 +153,12 @@ struct irq_alloc_info {
 			struct IO_APIC_route_entry *ioapic_entry;
 		};
 #endif
+#ifdef	CONFIG_DMAR_TABLE
+		struct {
+			int		dmar_id;
+			void		*dmar_data;
+		};
+#endif
 	};
 };
 
arch/x86/kernel/apic/msi.c +95 -56

192 lines not on this page · raw message

Signature · 1 line
1.7.10.4
author
#35 lore raw

PATCH v5 30/31 x86, htirq: Use hierarchy irqdomain to manage Hypertransport interrupts

In reply to Jiang Liu

Use hierarchy irqdomain to manage Hypertransport interrupts. We have slightly changed the architecture interfaces to support htirq PCI driver, it should be safe because currently Hypertransport interrupt is only enabled on x86 platforms.

---
 arch/x86/include/asm/hw_irq.h |   13 ++++
 arch/x86/kernel/apic/htirq.c  |  162 ++++++++++++++++++++++++++++++-----------
 arch/x86/kernel/apic/vector.c |    1 +
 drivers/pci/htirq.c           |   47 ++----------
 include/linux/htirq.h         |   24 ++++--
 5 files changed, 159 insertions(+), 88 deletions(-)
arch/x86/include/asm/hw_irq.h +13 -0
index 08240216f949..b9267d4f54ab 100644
@@ -159,6 +159,14 @@ struct irq_alloc_info {
 			void		*dmar_data;
 		};
 #endif
+#ifdef	CONFIG_HT_IRQ
+		struct {
+			int		ht_pos;
+			int		ht_idx;
+			struct pci_dev	*ht_dev;
+			void		*ht_update;
+		};
+#endif
 	};
 };
 
@@ -223,6 +231,11 @@ extern void arch_init_msi_domain(struct irq_domain *domain);
 #else
 static inline void arch_init_msi_domain(struct irq_domain *domain) { }
 #endif
+#ifdef	CONFIG_HT_IRQ
+extern void arch_init_htirq_domain(struct irq_domain *domain);
+#else
+static inline void arch_init_htirq_domain(struct irq_domain *domain) { }
+#endif
 
 /* Statistics */
 extern atomic_t irq_err_count;
arch/x86/kernel/apic/htirq.c +121 -41

210 lines not on this page · raw message

arch/x86/kernel/apic/vector.c +1 -0
index 6d3cc6a0b1eb..bf4c61660f3d 100644
@@ -365,6 +365,7 @@ int __init arch_early_irq_init(void)
 	irq_set_default_host(x86_vector_domain);
 
 	arch_init_msi_domain(x86_vector_domain);
+	arch_init_htirq_domain(x86_vector_domain);
 
 	return arch_early_ioapic_init();
 }
drivers/pci/htirq.c +6 -41

80 lines not on this page · raw message

include/linux/htirq.h +18 -6
index 5caa51b7b95c..d4a527e58434 100644
@@ -1,26 +1,38 @@
 #ifndef LINUX_HTIRQ_H
 #define LINUX_HTIRQ_H
 
+struct pci_dev;
+struct irq_data;
+
 struct ht_irq_msg {
 	u32	address_lo;	/* low 32 bits of the ht irq message */
 	u32	address_hi;	/* high 32 bits of the it irq message */
 };
 
+typedef void (ht_irq_update_t)(struct pci_dev *dev, int irq,
+			       struct ht_irq_msg *msg);
+
+struct ht_irq_cfg {
+	struct pci_dev *dev;
+	 /* Update callback used to cope with buggy hardware */
+	ht_irq_update_t *update;
+	unsigned pos;
+	unsigned idx;
+	struct ht_irq_msg msg;
+};
+
 /* Helper functions.. */
 void fetch_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg);
 void write_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg);
-struct irq_data;
 void mask_ht_irq(struct irq_data *data);
 void unmask_ht_irq(struct irq_data *data);
 
 /* The arch hook for getting things started */
-int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev);
-int arch_alloc_ht_irq(struct pci_dev *dev);
-void arch_free_ht_irq(int irq);
+int arch_setup_ht_irq(int idx, int pos, struct pci_dev *dev,
+		      ht_irq_update_t *update);
+void arch_teardown_ht_irq(unsigned int irq);
 
 /* For drivers of buggy hardware */
-typedef void (ht_irq_update_t)(struct pci_dev *dev, int irq,
-			       struct ht_irq_msg *msg);
 int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update);
 
 #endif /* LINUX_HTIRQ_H */
Signature · 1 line
1.7.10.4
author
#36 lore raw

PATCH v5 31/31 x86, uv: Use hierarchy irqdomain to manage UV interrupts

In reply to Jiang Liu

Enhance UV code to support hierarchy irqdomain, it helps to make the architecture more clear.

We should construct hwirq based on mmr_blade and mmr_offset, but mmr_offset is type of unsigned long, it may exceed the range of irq_hw_number_t. So help about the way to construct hwirq based on mmr_blade and mmr_offset is welcomed!

---
 arch/x86/include/asm/hw_irq.h |    9 ++
 arch/x86/platform/uv/uv_irq.c |  288 ++++++++++++++++-------------------------
 2 files changed, 118 insertions(+), 179 deletions(-)
arch/x86/include/asm/hw_irq.h +9 -0
index b9267d4f54ab..0620d3b84707 100644
@@ -123,6 +123,7 @@ enum irq_alloc_type {
 	X86_IRQ_ALLOC_TYPE_MSI,
 	X86_IRQ_ALLOC_TYPE_MSIX,
 	X86_IRQ_ALLOC_TYPE_DMAR,
+	X86_IRQ_ALLOC_TYPE_UV,
 };
 
 struct irq_alloc_info {
@@ -167,6 +168,14 @@ struct irq_alloc_info {
 			void		*ht_update;
 		};
 #endif
+#ifdef	CONFIG_X86_UV
+		struct {
+			int		uv_limit;
+			int		uv_blade;
+			unsigned long	uv_offset;
+			char		*uv_name;
+		};
+#endif
 	};
 };
 
arch/x86/platform/uv/uv_irq.c +109 -179

360 lines not on this page · raw message

Signature · 1 line
1.7.10.4