brcmfmac: fix conversion of channel width 20MHZ_NOHT

The function chandef_to_chanspec() failed when converting a chandef with bandwidth set to NL80211_CHAN_WIDTH_20_NOHT. This was reported by user running the device in AP mode.

------------[ cut here ]------------
WARNING: CPU: 0 PID: 304 at
	drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c:381
		chandef_to_chanspec.isra.11+0x158/0x184()

Modules linked in:

CPU: 0 PID: 304 Comm: hostapd Not tainted 3.16.0-rc7-abb+g64aa90f #8

[<c0014bb4>] (unwind_backtrace) from [<c0012314>] (show_stack+0x10/0x14) [<c0012314>] (show_stack) from [<c001d3f8>] (warn_slowpath_common+0x6c/0x8c) [<c001d3f8>] (warn_slowpath_common) from [<c001d4b4>] (warn_slowpath_null+0x1c/0x24) [<c001d4b4>] (warn_slowpath_null) from [<c03449a4>] (chandef_to_chanspec.isra.11+0x158/0x184) [<c03449a4>] (chandef_to_chanspec.isra.11) from [<c0348e00>] (brcmf_cfg80211_start_ap+0x1e4/0x614) [<c0348e00>] (brcmf_cfg80211_start_ap) from [<c04d1468>] (nl80211_start_ap+0x288/0x414) [<c04d1468>] (nl80211_start_ap) from [<c043d144>] (genl_rcv_msg+0x21c/0x38c) [<c043d144>] (genl_rcv_msg) from [<c043c740>] (netlink_rcv_skb+0xac/0xc0) [<c043c740>] (netlink_rcv_skb) from [<c043cf14>] (genl_rcv+0x20/0x34)
[<c043cf14>] (genl_rcv) from [<c043c0a0>] (netlink_unicast+0x150/0x20c) [<c043c0a0>] (netlink_unicast) from [<c043c4b8>] (netlink_sendmsg+0x2b8/0x398) [<c043c4b8>] (netlink_sendmsg) from [<c04066a4>] (sock_sendmsg+0x84/0xa8) [<c04066a4>] (sock_sendmsg) from [<c0407c5c>] (___sys_sendmsg.part.29+0x268/0x278) [<c0407c5c>] (___sys_sendmsg.part.29) from [<c0408bdc>] (__sys_sendmsg+0x4c/0x7c) [<c0408bdc>] (__sys_sendmsg) from [<c000ec60>] (ret_fast_syscall+0x0/0x44)

---[ end trace 965ee2158c9905a2 ]---

---
 drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 6 ++++++
 1 file changed, 6 insertions(+)

index 28fa25b..39b45c0 100644
@@ -299,6 +299,7 @@ static u16 chandef_to_chanspec(struct brcmu_d11inf *d11inf,
 	primary_offset = ch->center_freq1 - ch->chan->center_freq;
 	switch (ch->width) {
 	case NL80211_CHAN_WIDTH_20:
+	case NL80211_CHAN_WIDTH_20_NOHT:
 		ch_inf.bw = BRCMU_CHAN_BW_20;
 		WARN_ON(primary_offset != 0);
 		break;

@@ -323,6 +324,10 @@ static u16 chandef_to_chanspec(struct brcmu_d11inf *d11inf,
 				ch_inf.sb = BRCMU_CHAN_SB_LU;
 		}
 		break;
+	case NL80211_CHAN_WIDTH_80P80:
+	case NL80211_CHAN_WIDTH_160:
+	case NL80211_CHAN_WIDTH_5:
+	case NL80211_CHAN_WIDTH_10:
 	default:
 		WARN_ON_ONCE(1);
 	}

@@ -333,6 +338,7 @@ static u16 chandef_to_chanspec(struct brcmu_d11inf *d11inf,
 	case IEEE80211_BAND_5GHZ:
 		ch_inf.band = BRCMU_CHAN_BAND_5G;
 		break;
+	case IEEE80211_BAND_60GHZ:
 	default:
 		WARN_ON_ONCE(1);
 	}

1.9.1